In message: [EMAIL PROTECTED]
Lars Eggert [EMAIL PROTECTED] writes:
: Hi,
:
: we've got an Asus Pundit here that has an onboard 4-in-1 memory card reader:
:
: [EMAIL PROTECTED]:16:1:class=0x050100 card=0x17241043 chip=0x05101524
: rev=0x00
: hdr=0x00
: vendor = 'ENE
If you have any of the devices listed below, please test with a recent
-stable or -current. They will stop working in 4.9 and 5.2 although old
behavior can _temporarily_ be enabled by adding options DA_OLD_QUIRKS to
your kernel config. If I don't hear from anyone, they'll be going away
On Fri, Aug 22, 2003 at 12:20:55AM -0700, Nate Lawson wrote:
If you have any of the devices listed below, please test with a recent
-stable or -current. They will stop working in 4.9 and 5.2 although old
behavior can _temporarily_ be enabled by adding options DA_OLD_QUIRKS to
your kernel
On Fri, 22 Aug 2003, Bruce M Simpson wrote:
On Fri, Aug 22, 2003 at 12:20:55AM -0700, Nate Lawson wrote:
If you have any of the devices listed below, please test with a recent
-stable or -current. They will stop working in 4.9 and 5.2 although old
behavior can _temporarily_ be enabled by
In message: [EMAIL PROTECTED]
Lars Eggert [EMAIL PROTECTED] writes:
: M. Warner Losh wrote:
: In message: [EMAIL PROTECTED]
: Lars Eggert [EMAIL PROTECTED] writes:
: : we've got an Asus Pundit here that has an onboard 4-in-1 memory card reader:
: :
: : [EMAIL
Nate Lawson [EMAIL PROTECTED] probably said:
If you have any of the devices listed below, please test with a recent
-stable or -current. They will stop working in 4.9 and 5.2 although old
behavior can _temporarily_ be enabled by adding options DA_OLD_QUIRKS to
your kernel config. If I don't
In message: [EMAIL PROTECTED]
Lars Eggert [EMAIL PROTECTED] writes:
: M. Warner Losh wrote:
: In message: [EMAIL PROTECTED]
: Lars Eggert [EMAIL PROTECTED] writes:
: : we've got an Asus Pundit here that has an onboard 4-in-1 memory card reader:
: :
: : [EMAIL
Hi,
I got another pmap related panic on my HTT SMP machine. If I don't get
that completely wrong, it dies again after accessing the return value of
pmap_pte_quick().
Kernel is: 5.1-CURRENT FreeBSD 5.1-CURRENT #23: Thu Aug 21 21:19:53 CEST
2003
NB: the other panic that I saw frequently can be
On 2003-08-16 18:10:38 (-0400), Eriq Lamar [EMAIL PROTECTED] wrote:
On i386 hardware and two processors amd mp. should I wait for 5.2.
I've been running 5.1-current on a few servers, and I've not bumped into any
serious problems. I have -stable machines nearby 'just in case' though, and
my
On Friday 22 August 2003 11:15, Philip Paeps wrote:
On 2003-08-16 18:10:38 (-0400), Eriq Lamar [EMAIL PROTECTED] wrote:
On i386 hardware and two processors amd mp. should I wait for 5.2.
I've been running 5.1-current on a few servers, and I've not bumped
into any serious problems. I have
I have a Sony Microvault that never worked, if this is related to the
quirks or not is beyond me to say so apologies if this post lacks
relevance.
It gets detected by umass (i have been told that the max lun error is
ok)
Aug 22 09:48:55 rollo /kernel: umass0: Sony USB Storage Media, rev
I've had similar problem with Avaya Gold which is also Lucent-card.
I replaced my Prism2 card with a Lucent card yesterday just to test it on -CURRENT.
But when I put a Compaq WL110 card, shit started to work again.
I did not debug problems with the Avaya card. I will today. It's possible I've
Glenn Johnson wrote (2003/08/21):
sound no longer works. I reverted to the previous versions of these
files to get sound back.
Hmm, as I expected, some cases has been fixed and some other cases
are broken now :o(
pcm0: Intel ICH5 (82801EB) port 0xdc00-0xdc3f,0xd800-0xd8ff mem
Hi,
I have installed a FreeBSD 5.1 on my Laptop (Compaq Armada E500).
I have a problem with the power management :
- I can't use the ACPI module : the kernel can't be loaded.
OK no problem !
As I saw within many FAQs, it's normal (it depends on the type of the laptop).
- I would like to use APM
On Fri, Aug 22, 2003 at 09:00:32AM +0400, Maxim Konovalov wrote:
On Sun, 17 Aug 2003, 17:21-0400, Craig Rodrigues wrote:
Hi,
With GEOM in place, is the 'c' partition for a CD device no
longer necessary for cdcontrol? At least on my system,
the CD shows up as /dev/acd0, not as
I saw that. I guess my question is whether a default nsswitch.conf file
will be checked into /etc and /usr/share/examples/etc, or whether it
will be left empty? I would expect that if this capability was working,
that a default nsswitch.conf would be checked into /etc. Many admins
may not
Is anyone implementing support for the grplist HesiodNameType? If I were to
implement it, should I be aware of any upcoming significant changes in the
NSS code that might break my patches?
Thanks!
Eric
--
Eric van GyzenSr. Systems Programmer
On Wed, 2003-08-20 at 17:04, Szilveszter Adam wrote:
Hello,
On Wed, Aug 20, 2003 at 03:20:55PM -0400, Matt Gostick wrote:
I have a SND Blaster 16 in my computer. I was using FreeBSD 4.8 and
'device pcm' in my kernel config file, worked great. I've completely
re-installed with 5.1R and
Date: Fri, 22 Aug 2003 00:20:55 -0700 (PDT)
From: Nate Lawson [EMAIL PROTECTED]
Sender: [EMAIL PROTECTED]
If you have any of the devices listed below, please test with a recent
-stable or -current. They will stop working in 4.9 and 5.2 although old
behavior can _temporarily_ be enabled by
Date: Fri, 22 Aug 2003 16:10:16 +0200
From: Armand Passelac [EMAIL PROTECTED]
Sender: [EMAIL PROTECTED]
Hi,
I have installed a FreeBSD 5.1 on my Laptop (Compaq Armada E500).
I have a problem with the power management :
- I can't use the ACPI module : the kernel can't be loaded.
OK no
On Thu, 21 Aug 2003, Michael Goffin wrote:
Does anyone know if Orinoco Gold cards just don't work in 5.1-current, or if
there is something special you have to do? I had the card working when I had
5.0-release without having to compile with OLDCARD. That install got really
bad so I went to
On Fri, Aug 22, 2003 at 10:40:32AM -0400, Richard Coleman wrote:
I saw that. I guess my question is whether a default nsswitch.conf file
will be checked into /etc and /usr/share/examples/etc, or whether it
will be left empty? I would expect that if this capability was working,
that a
On Fri, 22 Aug 2003, 10:39-0400, Craig Rodrigues wrote:
On Fri, Aug 22, 2003 at 09:00:32AM +0400, Maxim Konovalov wrote:
On Sun, 17 Aug 2003, 17:21-0400, Craig Rodrigues wrote:
Hi,
With GEOM in place, is the 'c' partition for a CD device no
longer necessary for cdcontrol? At
[ On Fri, 22 Aug, 2003 at 8:41, Kevin Oberman wrote: ]
Date: Fri, 22 Aug 2003 16:10:16 +0200
From: Armand Passelac [EMAIL PROTECTED]
Sender: [EMAIL PROTECTED]
Hi,
I have installed a FreeBSD 5.1 on my Laptop (Compaq Armada E500).
I have a problem with the power management
On Sat, 9 Aug 2003, Andrew Thompson wrote:
On Fri, 2003-08-08 at 15:41, Nate Lawson wrote:
I have applied Kevins DA_Q_NO_PREVENT patch and now the device is
working perfectly, here is the diff and new dmesg.
Thanks Nate and Kevin for your help. Should I send a PR?
Please do and then send me
M. Warner Losh wrote:
: What's at device 16.0?
:
: [EMAIL PROTECTED]:16:0: class=0x060700 card=0x14111524 chip=0x14111524 rev=0x01
: hdr=0x02
: vendor = 'ENE Technology Inc'
: class= bridge
: subclass = PCI-CardBus
So is the the CB1410, CB1420, CB710 or CB720?
With your
On 22-Aug-2003 Nate Lawson wrote:
On Fri, 22 Aug 2003, Bruce M Simpson wrote:
On Fri, Aug 22, 2003 at 12:20:55AM -0700, Nate Lawson wrote:
If you have any of the devices listed below, please test with a recent
-stable or -current. They will stop working in 4.9 and 5.2 although old
Ruslan Ermilov wrote:
On Fri, Aug 22, 2003 at 10:40:32AM -0400, Richard Coleman wrote:
I saw that. I guess my question is whether a default nsswitch.conf file
will be checked into /etc and /usr/share/examples/etc, or whether it
will be left empty? I would expect that if this capability was
On Fri, Aug 22, 2003 at 11:15:01AM -0700, Tim Kientzle wrote:
On the other hand, having
/etc/nsswitch.conf.example
would
a) Advertise the existence of nsswitch capabilities in
an obvious place where people new to FreeBSD would
see it.
b) Document the defaults.
c) Not
On Fri, Aug 22, 2003 at 11:15:01AM -0700, Tim Kientzle wrote:
Ruslan Ermilov wrote:
On Fri, Aug 22, 2003 at 10:40:32AM -0400, Richard Coleman wrote:
I saw that. I guess my question is whether a default nsswitch.conf file
will be checked into /etc and /usr/share/examples/etc, or whether it
Hi John,
I'm having this same problem and I would love to get you a kernel.debug core however I've discovered
after building the debugging kernel, the system literally panics during the kernel install. Do
you have any suggestions to get the debugging kernel installed successfully?
The last
Hi,
Rudolf Cejka wrote:
Glenn Johnson wrote (2003/08/21):
sound no longer works. I reverted to the previous versions of these
files to get sound back.
I might have the same issue. Does no longer work means silence? Then I
do. (Just got this box, so I don't know whether this was recently
Hi,
I have a HTT capabale PCU on an Intel MB with the 875P chipset. I have
enabled HTT in the BIOS and compiled my kernel with the required SMP
options, however i dont think the system is really running in SMP mode. Top
does not display CPU numbers. Here is my dmesg:
---
FreeBSD
Hi,
I have a HTT capabale PCU on an Intel MB with the 875P chipset. I have
enabled HTT in the BIOS and compiled my kernel with the required SMP
options, however i dont think the system is really running in SMP mode. Top
does not display CPU numbers. Here is my dmesg:
---
FreeBSD
/-- Lars Eggert wrote:
| This is a cryptographically signed message in MIME format.
|
| --ms080500030203050209080702
| Content-Type: text/plain; charset=us-ascii; format=flowed
| Content-Transfer-Encoding: 7bit
|
| Hi,
|
| Rudolf Cejka wrote:
| Glenn Johnson wrote (2003/08/21):
|
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.1-CURRENT #0: Fri Aug 22 15:41:01 EDT 2003
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/NS1
Date: Fri, 22 Aug 2003 13:29:17 -0700
From: Lars Eggert [EMAIL PROTECTED]
Sender: [EMAIL PROTECTED]
This is a cryptographically signed message in MIME format.
--ms080500030203050209080702
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding:
From: Orion Hodson [EMAIL PROTECTED]
Date: Fri, 22 Aug 2003 13:38:22 -0700
Sender: [EMAIL PROTECTED]
/-- Lars Eggert wrote:
| This is a cryptographically signed message in MIME format.
|
| --ms080500030203050209080702
| Content-Type: text/plain; charset=us-ascii;
Orion,
Orion Hodson wrote:
First off, apologies for the breakage.
no problem - thanks for all the hard work you, Cameron and the others
have put into the sound code!
Before investing any time doing a register dump, can you just check
whether your mixer now has an ogain control and that it is
That is not an SMP kernel. An SMP kernel (with APIC_IO) would not print out
the pcib0 interrupt routing messages.
--
John Baldwin [EMAIL PROTECTED]http://www.FreeBSD.org/~jhb/
Power Users Use the Power to Serve! - http://www.FreeBSD.org/
___
/-- Kevin Oberman wrote:
| From: Orion Hodson [EMAIL PROTECTED]
| Date: Fri, 22 Aug 2003 13:38:22 -0700
| Sender: [EMAIL PROTECTED]
|
| /-- Lars Eggert wrote:
| | This is a cryptographically signed message in MIME format.
| |
| | --ms080500030203050209080702
| |
/-- Lars Eggert wrote:
| What's weird is that everything looks like it should be playing - no
| weird messages, no jumpy progress bar, etc. I'll double-check my cabling
| again.
|
| One more thing: This board has a bunch of connectors, including regular
| analog out and SPDIF. Right now,
Having additional examples in /usr/share/examples/etc
would also be nice. (Ideally, with a comment in
/etc/nsswitch.conf.example pointing to those additional
examples.)
At the very least, a copy of the default nsswitch.conf should be in the
examples directory.Since I didn't find an example
Hi,
this is the output of
make buildkernel
cc -c -O -pipe -mcpu=pentiumpro -Wall -Wredundant-decls -Wnested-externs
-Wstrict-prototypes -Wmissing-prototypes -Wpointer-arith -Winline
-Wcast-qual -fformat-extensions -std=c99 -g -nostdinc -I- -I.
-I/usr/src/sys
On Wed, Aug 13, 2003 at 11:02:23AM +0200, Poul-Henning Kamp wrote:
I plan to remove the pca driver in about a week.
Protest only from actual users respected.
Not really 'actual', only 'old'. A lot of time ago I sent a message
about lost speaker (IIRC) because having both devive in the kernel
Orion Hodson wrote:
/-- Lars Eggert wrote:
| What's weird is that everything looks like it should be playing - no
| weird messages, no jumpy progress bar, etc. I'll double-check my cabling
| again.
|
| One more thing: This board has a bunch of connectors, including regular
| analog out and
Hi,
cdcontrol -f acd0 eject doesn't eject anything for this drive:
acd0: DVD-R PIONEER DVD-RW DVR-106D at ata0-slave UDMA33
However, with device atapicam an eject on the emulated cd0 device
works fine. It doesn't work with acd0 whether or not atapicam is enabled.
I could have sworn cdcontrol
On Fri, Aug 22, 2003 at 11:57:23PM +0200, Rainer Duffner wrote:
Hi,
this is the output of
make buildkernel
Usually you need to post your kernel config file when reporting
errors, so that others can try to reproduce the problem. However in
this case the problem has been widely reported, and
After a lot of bad luck with ACPI and my new Inspiron 5150, something good
happened today. I went to Dell's site, and they had a BIOS update for my
machine that took it to rev A23. This was actually an update from
PhoenixBIOS to DellBIOS. Once I got that installed, I went to Stijn
Hoop's Dell
That is not an SMP kernel. An SMP kernel (with APIC_IO) would not print
out
the pcib0 interrupt routing messages.
--
So whats the problem here? How come the CPUs dont show up in top. How do i
realy know the system sees 2, and actually utilizes them? Is there
anything else i have to do other
That is not an SMP kernel. An SMP kernel (with APIC_IO) would not print
out
the pcib0 interrupt routing messages.
--
So whats the problem here? How come the CPUs dont show up in top. How do i
realy know the system sees 2, and actually utilizes them? Is there
anything else i have to do
On Fri, Aug 22, 2003 at 07:03:03PM -0400, [EMAIL PROTECTED] wrote:
That is not an SMP kernel. An SMP kernel (with APIC_IO) would not print
out
the pcib0 interrupt routing messages.
--
So whats the problem here?
See above.
How come the CPUs dont show up in top.
See above.
How do
Alexander Kabaev wrote:
I am about to import an official GCC 3.3.1-release into our
source tree. Please hold your updates until 'all clear' message
is posted.
Done.
Alex, nice. Thank you for making -Wno-system-headers work in the
system compiler (henceforth, users that want to compile C++
Does anyone know if it's possible to use a Microsoft Bluetooth mouse
5.1?
I've had a play around with it, and was able to get bsd to see the
mouse,
but couldn't actually get the mouse working. If anyones had any success,
could they give me a few pointers?
Thanks in advance,
--
Brent
see
This happened after an rm -r /usr/obj/* ; make -j4 buildworld
=== gnu/usr.bin/sort
cc -I/usr/local/include -march=pentiumpro -I/usr/src/gnu/usr.bin/sort
-I/usr/src/gnu/usr.bin/sort/../../../contrib/gnu-sort/lib
-DHAVE_CONFIG_H -c /usr/src/contrib/gnu-sort/src/sort.c
In message: [EMAIL PROTECTED]
Lars Eggert [EMAIL PROTECTED] writes:
: However, even with a new kernel that has your latest commit, this device
: is still unattached. I'm attaching pciconf and dmesg, maybe that'll be
: of help?
not likely. there's a different interface for the flash
On Fri, Aug 22, 2003 at 07:03:03PM -0400, [EMAIL PROTECTED] wrote:
That is not an SMP kernel. An SMP kernel (with APIC_IO) would not
print
out
the pcib0 interrupt routing messages.
--
So whats the problem here?
See above.
How come the CPUs dont show up in top.
See above.
How
On Fri, Aug 22, 2003 at 10:23:52PM -0400, [EMAIL PROTECTED] wrote:
Well i've enabled all SMP options, recompiled and rebooted. The CPUs now
properly show up in dmesg and i can see the C header in top. However no
processes seem to be being assigned to cpu 1. Why is the schedueler only
using
Brent,
Does anyone know if it's possible to use a Microsoft Bluetooth mouse
5.1?
you need to have Bluetooth HID (Human Interface Device) support. someone
wrote me an e-mail a while ago asking the same question. i tried to explain
Bluetooth HID and how it works. its not a rocket science - you
Some changes in device driver locking recently broke Vinum for a short
period of time. The problem is now fixed. If you have any problems
with a recent version of Vinum, please let me know.
Greg
--
See complete headers for address and phone numbers
pgp0.pgp
Description: PGP signature
M. Warner Losh wrote:
In message: [EMAIL PROTECTED]
Lars Eggert [EMAIL PROTECTED] writes:
: However, even with a new kernel that has your latest commit, this device
: is still unattached. I'm attaching pciconf and dmesg, maybe that'll be
: of help?
not likely. there's a different
On Fri, Aug 22, 2003 at 01:38:22PM -0700, Orion Hodson wrote:
/-- Lars Eggert wrote:
| This is a cryptographically signed message in MIME format.
|
| --ms080500030203050209080702 Content-Type: text/plain;
| charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit
|
|
TB --- 2003-08-23 04:00:01 - starting CURRENT tinderbox run for alpha/alpha
TB --- 2003-08-23 04:00:01 - checking out the source tree
TB --- cd /home/des/tinderbox/CURRENT/alpha/alpha
TB --- /usr/bin/cvs -f -R -q -d/home/ncvs update -Pd -A src
TB --- 2003-08-23 04:09:14 - building world
TB --- cd
Peter Radcliffe [EMAIL PROTECTED] probably said:
The problem I'm having with it is trying to write the 4.8-REL-p3
kernel floppy image to a floppy.
With the USB drive the resulting floppy barfs trying to load the
kernel (repeatedly, with various different floppies and trying to boot
in
64 matches
Mail list logo
