Hello!
Over the last months I've had a "problem" regarding battery status on my
laptop which has been running FreeBSD CURRENT in order to have a working
Intel driver (Haswell).
My problem/question is that when I boot the laptop with a fully charged
battery and it is still connected to a
Hello!
I'm just curious about how Intel Haswell GPU support in FreeBSD is
coming along?
What's the ETA of when the driver can be tested?
Anders
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
-Opprinnelig melding-
Fra: owner-freebsd-curr...@freebsd.org
[mailto:owner-freebsd-curr...@freebsd.org] På vegne av Jakob Alvermark
Sendt: tirsdag 30. juni 2015 20.53
Til: freebsd-current@freebsd.org
Emne: Re: UEFI boot fail on higher resolutions (Re: Acer E3-112 and UEFI)
On Wed,
On 3/22/2015 7:22 AM, Adrian Chadd wrote:
ok, then hm, where's the gpio pin configured..
-a
How do I check where this gpio pin is configured? I guess I have to
enable gpio in the kernel in order to somehow do that?
On 21 March 2015 at 21:55, Miguel Clara miguelmcl...@gmail.com wrote:
Do you mean to check dmesg -a while doing vmstat -ia | grep ath0?
I did run wlandebug +scan, then ifconfig wlan0 up scan and then
vmstat -ia | grep ath0.
The only output I got from vmstat -ia | grep ath0 is:
irq18: ath021 0
The second time I ran that last command I got
irq18: ath0
March 2015 at 09:52, Anders Bolt-Evensen andersb...@icloud.com
wrote:
Hello!
Recently I had to buy a new computer as my Mac broke down.
I ended up with an Acer Aspire V17 Nitro, which, except for a couple of
problems, is all good.
One of the problems is that wifi does not work. The wifi driver
Hello!
Recently I had to buy a new computer as my Mac broke down.
I ended up with an Acer Aspire V17 Nitro, which, except for a couple of
problems, is all good.
One of the problems is that wifi does not work. The wifi driver is an
Atheros AR9460.
The problem is that when I attempt to scan for
On 18 Feb 2015, at 20:45, Shawn Webb latt...@gmail.com wrote:
On Wednesday, February 18, 2015 12:45:36 AM Jean-Sébastien Pédron wrote:
Hi!
An update to the DRM subsystem, not including the drivers, is ready for
wider testing!
The patch against HEAD is here:
On 18/02/15 00:45, Jean-Sébastien Pédron wrote:
Hi!
An update to the DRM subsystem, not including the drivers, is ready for
wider testing!
The patch against HEAD is here:
https://people.freebsd.org/~dumbbell/graphics/drm-update-38.f.patch
I'm interested in success/failure reports for amd64,
Hello.
A few months ago I sent an e-mail to this mailing list and reported
about problems related to starting X on FreeBSD when using EFI mode. I
fixed that problem by using the scfb driver from ports.
Today I, using Xorg -configure, was playing around with the intel
driver, since my Mac
Hello!
Whenever I try to load the asmc kernel module on my Mac in EFI mode (it's a
MacBookPro8,3, which I've added to asmc.c), I'm getting an error message that
says asmc0: model not recognized.
However, when I install FreeBSD to a hard drive using MBR, then add
MacBookPro8,3 to asmc.c,
Hello!
Whenever I try to load the asmc kernel module on my Mac in EFI mode (it's a
MacBookPro8,3, which I've added to asmc.c), I'm getting an error message that
says asmc0: model not recognized.
However, when I install FreeBSD to a hard drive using MBR, then add
MacBookPro8,3 to asmc.c,
On 09/17/2014 00:54, Nathan Whitehorn wrote:
Try xf86-video-scfb instead?
I also had the same problem (mentioned in another thread called
Problems starting X on Mac using vesa, radeon or intel drivers when
running FreeBSD-CURRENT in EFI), and following your suggestion to
install the
AM, Anders Bolt Evensen andersb...@icloud.com
wrote:
On 05.09.14 19:37, John Nielsen wrote:
On Sep 5, 2014, at 11:30 AM, Glen Barber g...@freebsd.org wrote:
On Fri, Sep 05, 2014 at 11:20:21AM -0600, John Nielsen wrote:
I have a MacBook Pro Retina, Mid 2012 (MacBookPro10,1) on which I'd
On 05.09.14 19:37, John Nielsen wrote:
On Sep 5, 2014, at 11:30 AM, Glen Barber g...@freebsd.org wrote:
On Fri, Sep 05, 2014 at 11:20:21AM -0600, John Nielsen wrote:
I have a MacBook Pro Retina, Mid 2012 (MacBookPro10,1) on which I'd like to
be able to boot FreeBSD from an external USB
/14 03:09, Anders Bolt-Evensen wrote:
I also got a message like that when I booted from a USB stick on a
MacBookPro8,3 (17 inch, late 2011).
I fixed it by creating a custom ISO image and burned that onto a DVD
using an external DVD drive.
The UEFI installer boots fine from this external DVD
What I did was:
Install subversion either from ports or via pkg install
Get the newest source code from FreeBSD by running the command svn
checkout svn://svn.freebsd.org/base/head /usr/src (or whatever directory
you might choose, I used /usr/src)
Then I ran make buildworld from the new
I also got a message like that when I booted from a USB stick on a
MacBookPro8,3 (17 inch, late 2011).
I fixed it by creating a custom ISO image and burned that onto a DVD
using an external DVD drive.
The UEFI installer boots fine from this external DVD drive.
Here is how I did it:
MacBookPro8,3 doesn't work with uefi boot either.
At least mine doesn't.
On 19.05.14 02:36, Huang Wen Hui wrote:
Hi,
I test uefi boot on Macs, some success, include:
iMac13,2 , MacbookPro 2012, Macmini5,3.
But have problem on MacbookPro 2013, loader stop at:
Start @ 0x802d6ef0 ...
On 9/6/13 5:04 PM, O. Hartmann ohart...@zedat.fu-berlin.de wrote:
On Fri, 06 Sep 2013 11:35:35 +0400
Boris Samorodov b...@passap.ru wrote:
06.09.2013 07:16, AN пишет:
Hi:
I am posting to both lists because this problem affects users of
current and ports, and I didn't know which would
Hi, everyone and good morning! To make a long story short I'm attempting to
install 10-CURRENT on my 2011 model 17 inch MacBook Pro. I downloaded the
appropriate amd64 image from FreeBSD's FTP site, burned it out to DVD and
installed it on my old FreeBSD 9 partition, erasing existing data.
be appreciated.
-Anders
On 17.12.2012 09:10, Anders Bolt-Evensen andersb...@icloud.com wrote:
Hi, everyone and good morning! To make a long story short I'm attempting
to
install 10-CURRENT on my 2011 model 17 inch MacBook Pro. I downloaded the
appropriate amd64 image from FreeBSD's FTP site, burned
22 matches
Mail list logo
