0xc190-0xc191,0xc192-0xc1923fff irq 16 at device 0.0 on pci3
em1: Using MSIX interrupts with 5 vectors
em1: [ITHREAD]
em1: [ITHREAD]
em1: [ITHREAD]
em1: [ITHREAD]
em1: [ITHREAD]
em1: Ethernet address: 00:15:17:c8:4b:98
Mike
with 6 removable, self powered
Root mount waiting for: usbus1
uhub3: 6 ports with 6 removable, self powered
Trying to mount root from nfs:
NFS ROOT: 10.255.255.1:/usr/home/pxe9/
Mike Tancsa, tel
Mike Tancsa, tel +1 519 651 3400
Sentex Communications,[EMAIL PROTECTED]
Providing Internet since 1994www.sentex.net
Cambridge, Ontario Canada www.sentex.net/mike
Are they Tyan motherboards by chance ? There was a thread in stable
about this a few weeks ago. The problems seem specific to those
motherboards. Someone posted a potential workaround as well.
---Mike
On Fri, 26 Sep 2003 11:40:08 -0500, in sentex.lists.freebsd.current
you wrote:
I am
At 11:32 PM 26/09/2003, Glenn Johnson wrote:
On Fri, Sep 26, 2003 at 08:07:38PM -0400, Mike Tancsa wrote:
Are they Tyan motherboards by chance ? There was a thread in stable
about this a few weeks ago. The problems seem specific to those
motherboards. Someone posted a potential workaround
At 02:45 AM 12/21/2002 +0100, Dan Lukes wrote:
At 10:22 PM 20/12/2002 +0100, Dan Lukes wrote:
If there somebody failing to configure vlans on a nic with
vlan-hardware support - read the PR 46405 (patch attached).
Mike Tancsa wrote, On 12/20/02 22:46:
Does this bug show up
it states:
ugen0: SCM Microsystems Inc. eUSB SmartMedia Adapter, rev 1.10/2.18, addr 2
When i unplug it, it reports:
ugen0: at uhub0 port 1 (addr 2) disconnected
ugen0: detached
Any suggestions? Any help is appreciated, thanks in advance.
Cheers,
Brad Hughes
[EMAIL PROTECTED]
Mike Tancsa ([EMAIL
-FDX, 100baseTX, 100baseTX-FDX, auto
Thank you *VERY* much for fixing this problem.
---Mike
At 01:43 PM 8/26/01 -0400, Mike Tancsa wrote:
I have it on two machines with this chipset and it looks good so
far. After installing, dmesg shows
fxp0: Intel Pro/100 Ethernet port 0xc400-0xc43f
At 10:52 PM 8/27/2001 -0700, Terry Lambert wrote:
Mike Tancsa wrote:
fxp0: Intel Pro/100 Ethernet port 0xc400-0xc43f mem
0xd5001000-0xd5001fff irq 11 at device 8.0 on pci1
fxp0: *** DISABLING DYNAMIC STANDBY MODE IN EEPROM ***
fxp0: New EEPROM ID: 0x49a0
fxp0: EEPROM checksum @ 0xff
Mike Tancsa, tel +1 519 651 3400
Network Administration, [EMAIL PROTECTED]
Sentex Communications www.sentex.net
Cambridge, Ontario Canada
. It would
be bad enough even on a personal workstation, let alone a server.
---Mike
Mike Tancsa ([EMAIL PROTECTED])
Sentex Communications Corp,
Waterloo, Ontario, Canada
"Given enough time, 100 monkeys on 100 routers
could setup a national IP network.&q
into the BIOS,
a DOS boot disk is enough. Make a couple to gaurd against bad floppies and
you should be fine.
---Mike
Mike Tancsa ([EMAIL PROTECTED])
Sentex Communications Corp,
Waterloo, Ontario, Canada
"Given enough time, 100 monkeys on 100 routers
could
I do follow current, but I must be blind if I missed it. What is the
latest date for 4.0R ? Will there be instead another Release Candidate and
more testing ?
---Mike
Mike Tancsa
Mike Tancsa, tel +1 519 651 3400
Network Administrator,[EMAIL PROTECTED]
Sentex Communications www.sentex.net
Cambridge, Ontario Canada
To Unsubscribe: send mail
._ instead of _e.g_ ?
Also, does the ISO image have the same issue ?
---Mike
----
Mike Tancsa, tel +1 519 651 3400
Network Administrator,[EMAIL PROTECT
, So I take it that the 0308 SNAP on current.freebsd.org still has this
bug ?
---Mike
Mike Tancsa, tel +1 519 651 3400
Network Administrator,[EMAIL
problems since.
---Mike
Mike Tancsa ([EMAIL PROTECTED])
Sentex Communications Corp,
Waterloo, Ontario, Canada
"Given enough time, 100 monkeys on 100 routers
could setup a national IP network." (KDW2)
To Unsubscribe: send mail to [EMAIL
A recently cvsup'd current that I had been doing make worlds on for the
past few weeks without issue. Is there something different that needs to
be done ?
.
.
.
Skipping directory `ufs/ufs'
vm/pmap.h - vm/pmap.ph
vm/swap_pager.h - vm/swap_pager.ph
vm/vm.h - vm/vm.ph
vm/vm_extern.h -
At 03:22 PM 2/24/2000 -0800, Mike Smith wrote:
megaraid: v107 (December 22, 1999)
megaraid: found 0x8086:0x1960:idx 0:bus 0:slot 10:func 1
scsi1 : Found a MegaRAID controller at 0xd0002000, IRQ: 12
megaraid: [GH6D:1.43] detected 1 logical drives
scsi0 : Adaptec AHA274x/284x/294x
The first time I thought I made a typo, but the second time through it
happened again. It seems that even if you choose NO to setup anon FTP, it
still gets setup. Anyone else notice this ? This was through the standard
installation.
---Mike
To Unsubscribe: send mail to [EMAIL
At 07:51 PM 2/24/2000 -0800, Bill Swingle wrote:
I just did an install of the Feb 22 snap. The new wording for the anon
ftp section is really screwy. It's been turned around. The old straight
forward "Do you want to enable anon ftp?" was fine.
Hrmm.
OK, I am embarrassed now :-) I cant believe
At 12:26 AM 2/24/2000 -0800, Mike Smith wrote:
OK, on the PERC2/SC and LINUX with the firmware from Dell (3.00), it pukes
with Redhat LINUX. I am able to talk to the card, fdisk and newfs it, but
it crashes hard when you write to the partition. I am going to try and
reflash the card to
the same on FreeBSD, but it did
not have any positive effect. So it seems the card does work...
---Mike
Mike Tancsa, tel +1 519 651 3400
Network Administrator
places in CTRL-M on these
systems prior to these changes.
Until I flashed it to this new rev, I was seeing this behaviour.
---Mike
Mike Tancsa, tel +1 519 651 3400
Network
At 09:19 PM 2/22/2000 -0800, Mike Smith wrote:
On 18 Feb 2000 17:39:19 -0500, in sentex.lists.freebsd.current you wrote:
Hmm. I did some testing, and I can lock both the G6HC and G6HD firmware
up within a few minutes. The Dell 3.00 firmware remains stable under the
same load (20
a
firmware lockup - the SCSI bus is hung and usually the PCI bus as well.
I am going to test the card in another older MB to see if its some strange
interaction. What MB chipset are you using to test with ?
---Mike
Mike Tancsa ([EMAIL PROTECTED])
Sentex Communications Corp
*)
Mike Tancsa, tel +1 519 651 3400
Network Administrator,[EMAIL PROTECTED]
Sentex Communications www.sentex.net
Cambridge, Ontario Canada
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubs
I am not quite sure yet how best to optimze for that.
---Mike
Mike Tancsa, tel +1 519 651 3400
Network Administrator,[EMAIL PROTECTED]
Sentex
amr0: 55db000/4096
----
Mike Tancsa, tel +1 519 651 3400
Network Administrator,[EMAIL PROTECTED]
Sentex Communications www.sentex.net
Cambr
At 04:19 PM 2/17/2000 -0800, Mike Smith wrote:
Hmm. I flashed my PERC 2 up to the latest AMI firmware, and with about a
dozen bonnie processes running it took about 30 seconds for the controller
to lock up completely (I had to power-cycle it to get it to come back).
Is this a purely amr box ?
At 04:50 PM 2/17/2000 -0800, Mike Smith wrote:
At 04:19 PM 2/17/2000 -0800, Mike Smith wrote:
Hmm. I flashed my PERC 2 up to the latest AMI firmware, and with about a
dozen bonnie processes running it took about 30 seconds for the controller
to lock up completely (I had to power-cycle it
At 05:15 PM 2/16/2000 -0800, Mike Smith wrote:
Hi,
I have been trying to get a PERC 2 (aka MegaRAID 466) working with
Current. The box worked fine with the 428, but seems to barf with only the
controller swapped.
I don't think the two controllers share on-disk configuration
version with OEM cards. Should I try it anyways ?
---Mike
Mike Tancsa, tel +1 519 651 3400
Network Administrator,[EMAIL PROTECTED]
Sentex Communications
At 07:04 PM 2/16/2000 -0800, Mike Smith wrote:
newmail# dd if=/dev/zero of=/dev/amrd0 count=16
16+0 records in
16+0 records out
8192 bytes transferred in 0.006427 secs (1274613 bytes/sec)
newmail# disklabel -Brw amrd0 auto
newmail# disklabel -e amrd0
disklabel: ioctl DIOCGDINFO:
a power search with
the forms *freebsd* and the keywords cmd ata
---Mike
Mike Tancsa, tel +1 519 651 3400
Network Administrator,[EMAIL PROTECTED]
Sentex
text file.
---Mike
Mike Tancsa, tel +1 519 651 3400
Network Administrator,[EMAIL PROTECTED]
Sentex Communications
xl0 down to disable the cable modem interface completely.
Anybody any idea where I can start to debug this weird problem?
What does your routing table look like before and after ?
---Mike
Mike Tancsa ([EMAIL PROTECTED])
Sentex Communications Corp,
Waterloo
: 122647MB (251181056 sectors) RAID 5 (optimal)
Try
dd if=/dev/zero of=/dev/ramrd0 count=16
disklabel -rw amrd0 auto
newfs amrd0c
---Mike
Mike Tancsa ([EMAIL PROTECTED])
Sentex Communications Corp,
Waterloo, Ontario, Canada
"Given enough time, 100 mo
This is a border router with 2 views of the net running defaultless.
---Mike
Mike Tancsa, tel +1 519 651 3400
Network Administrator,[EMAIL PROTECTED]
Sentex
would have been hit no ?
---Mike
Mike Tancsa, tel +1 519 651 3400
Network Administrator,[EMAIL PROTECTED]
Sentex Communications
---Mike
**
Mike Tancsa, Network Admin* [EMAIL PROTECTED]
Sentex Communications Corp, * http://www.sentex.net/mike
Cambridge, Ontario* 519 651 3400
Canada*
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe
ve
FreeBSD 4.0-CURRENT #0: Sun Oct 24 09:34:47 EDT 1999
How should I be fdisking and disklabling the drive ? Anything different
than
dd if=/dev/zero of=/dev/rmlxd0 bs=1k count=1
disklabel -Brw mlxd0 auto
disklabel -e mlxd0
newfs /dev/rmlxd0e
Thanks,
---Mike
Mike Tancsa ([EMAIL
**
Mike Tancsa, Network Admin* [EMAIL PROTECTED]
Sentex Communications Corp, * http://www.sentex.net/mike
Cambridge, Ontario* 01.519.651.3400
Canada*
To Unsubscribe: send
looks odd.
---Mike
**
Mike Tancsa, Network Admin* [EMAIL PROTECTED]
Sentex Communications Corp, * http://www.sentex.net/mike
Cambridge, Ontario* 01.519.651.3400
Canada
Is there something up with the cvsup servers or is my repository hosed? I
havent seen any updates in over a day. How do I go about checking if
something is messed up on my end ?
---Mike
**
Mike Tancsa, Network Admin
On 22 Oct 1999 00:37:41 -0400, in sentex.lists.freebsd.current you wrote:
At 2:33 PM -0400 1999/10/20, Mike Tancsa wrote:
I have been playing for now with RAID 0 to get a sense of various
performance settings, which can dramatically effect bonnie and iozone
results. e.g. Write Back vs write
Mike Tancsa, tel 01.519.651.3400
Network Administrator,[EMAIL PROTECTED]
Sentex Communications www.sentex.net
Cambridge, Ontario Canada
To Unsubscribe: send mail
The array consists of 5 segate drives that were working fine with the
MegaRAID controller.
---Mike
----
Mike Tancsa, tel 01.519.651.3400
Network Administrator,
/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU /sec
%CPU
40 10952 66.9 11622 22.6 9564 30.1 14230 100.0 63604 100.0
6944.5 99.8
Mike Tancsa, tel 01.519.651.3400
Network
account name ? Also, what happens if one user who has a big queue,
gets killed mid transit, than another user comes on with the same IP. Do
you have a facility for stopping the queue ?
---Mike
Mike Tancsa (mdtan...@sentex.net)
Sentex Communications Corp,
Waterloo
355941 4200959
---Mike
Mike Tancsa, tel 01.519.651.3400
Network Administrator,m...@sentex.net
Sentex Communications
= 0xefbf85a0,
tf_ss = 0x2f}) at ../../i386/i386/trap.c:1100
#18 0xf0220dcc in Xint0x80_syscall ()
#19 0x804dc46 in ?? ()
#20 0x804e85c in ?? ()
#21 0x8048f7d in ?? ()
(kgdb)
Mike Tancsa
Mike Tancsa, tel 01.519.651.3400
Network Administrator,m...@sentex.net
Sentex Communications www.sentex.net
Cambridge, Ontario Canada
To Unsubscribe: send mail to majord...@freebsd.org
. Yaroshevsky | Donetsk State Technical University
:: YY18-RIPE | (380 622) 356455 y...@dgtu.donetsk.ua
Mike Tancsa, tel 01.519.651.3400
Network Administrator
file |xargs fgrep fticom; done'
/dev/null 21
echo
done
- cut here
--
Yury V. Yaroshevsky | Donetsk State Technical University
YY18-RIPE | (380 622) 356455 y...@dgtu.donetsk.ua
**
Mike Tancsa
**
Mike Tancsa, Network Admin* m...@sentex.net
Sentex Communications Corp, * http://www.sentex.net/mike
Cambridge, Ontario* 01.519.651.3400
Canada*
To Unsubscribe: send mail to majord...@freebsd.org
with unsubscribe
At 04:49 AM 2/25/99 , Søren Schmidt wrote:
It seems Mike Tancsa wrote:
On 24 Feb 1999 18:39:36 -0500, in sentex.lists.freebsd.current you wrote:
Hmm, which suggests that I need to leave the do it by hand code in
there and recommend removing the BIOS :(
Are there any plans to support
On 24 Feb 1999 18:39:36 -0500, in sentex.lists.freebsd.current you wrote:
Hmm, which suggests that I need to leave the do it by hand code in
there and recommend removing the BIOS :(
Are there any plans to support the Promise Fast Trak IDE RAID controller ?
---Mike
Mike Tancsa (mdtan
On 5 Feb 1999 23:56:04 -0500, in sentex.lists.freebsd.current you wrote:
#define quoting(Mike Tancsa)
// Are there any other options for VPN on the 3.0 branch ? SKIP wasnt/isnt
// the greatest, but I had decent luck with it on the 2.2 branch of things...
Have you tried the ssh+ppp combo ? IIRC
cannot load klds ? Is that correct ?
Are there any other options for VPN on the 3.0 branch ? SKIP wasnt/isnt
the greatest, but I had decent luck with it on the 2.2 branch of things...
---Mike
Mike Tancsa (mdtan...@sentex.net)
Sentex Communications Corp
to transfer files.
ftp
---Mike
**
Mike Tancsa, Network Admin* m...@sentex.net
Sentex Communications Corp, * http://www.sentex.net/mike
Cambridge, Ontario* 01.519.651.3400
Canada
, and that
max open files are nowhere near that. Granted, those are 2.2-STALBE systems.
---Mike
**
Mike Tancsa, Network Admin* m...@sentex.net
Sentex Communications Corp, * http://www.sentex.net/mike
Cambridge
Is there any way to read some of the newer BIOS features such as CPU temp.,
fan status etc ? Is this even a standardize BIOS feature set ?
---Mike
**
Mike Tancsa, Network Admin* m...@sentex.net
Sentex
**
Mike Tancsa, Network Admin* m...@sentex.net
Sentex Communications Corp, * http://www.sentex.net/mike
Cambridge, Ontario* 01.519.651.3400
Canada*
To Unsubscribe: send mail to majord...@freebsd.org
with unsubscribe
At 02:51 PM 1/21/99 +1030, Greg Lehey wrote:
On Wednesday, 20 January 1999 at 23:15:15 -0500, Mike Tancsa wrote:
Am I the only one seeing this ?
Yes, I think so.
I would guess that you cvsupped in the window between 16:25:48 PST,
when I committed the new Makefile, and 16:31:31 PST, when I
Just wondering if there is an updated timeline for 3.0.1 release ?
---Mike
**
Mike Tancsa, Network Admin* m...@sentex.net
Sentex Communications Corp, * http://www.sentex.net/mike
Cambridge, Ontario
101 - 166 of 166 matches
Mail list logo
