Re: ATAng probe updated please test
D. Rock schrieb: Soren Schmidt schrieb: I've gone over the probe code once again. Please test, and in case it fails to detect or misdetects anything, mail me the output of dmesg from a verbose boot, and state what devices actually are there. Hi, again no luck. Same problem persists, the devices got probed correctly (two disks, each on its own channel), but cannot be accessed. Just an additional notice: Booting in PIO mode (by setting hw.ata.ata_dma=0 in /boot/loader.conf): [...] GEOM: create disk ad0 dp=0xc10b3b70 ad0: 9671MB IBM-DTTA-351010 [20960/15/63] at ata0-master PIO4 GEOM: create disk ad1 dp=0xc10b3470 ad1: 1221MB Seagate Technology 1275MB - ST31276A [2482/16/63] at ata1-master PIO4 Waiting 2 seconds for SCSI devices to settle Mounting root from ufs:/dev/ad0a But if I try to set DMA mode later via atacontrol, the problem reappears: # atacontrol mode 0 udma2 udma2 Master = UDMA33 Slave = BIOSPIO # atacontrol mode 1 udma2 udma2 Master = WDMA2 Slave = BIOSPIO ad0: WARNING - WRITE_DMA recovered from missing interrupt ad1: WARNING - READ_DMA recovered from missing interrupt /usr/local/squid: bad dir ino 22496 at offset 0: mangled entry panic: ufs_dirbad: bad dir Debugger(panic) Stopped at Debugger+0x45: xchgl %ebx,in_Debugger.0 db where Debugger(c04517f8) at Debugger+0x45 panic(c04682ea,c1281200,d5decb08,c039be8a,c129b08c) at panic+0xbb ufs_dirbad(c129b08c,0,c04682a4,c103ce40,0) at ufs_dirbad+0x3d ufs_lookup(d5decb38,d5decb74,c02b0005,d5decb38,287) at ufs_lookup+0x2be ufs_vnoperate(d5decb38) at ufs_vnoperate+0x13 vfs_cache_lookup(d5decbac,d5decbc8,c02b45df,d5decbac,c103ce40) at vfs_cache_lookup+0x29d ufs_vnoperate(d5decbac) at ufs_vnoperate+0x13 lookup(d5decc30,c103ce40,50,c110cc00,20) at lookup+0x2cb namei(d5decc30) at namei+0x1b5 stat(c103ce40,d5decd14,2,84,216) at stat+0x4a syscall(2f,2f,2f,0,81f4020) at syscall+0x233 Xint0x80_syscall() at Xint0x80_syscall+0x1d --- syscall (188, FreeBSD ELF32, stat), eip = 0x2815c95b, esp = 0xbfbffa6c, ebp = 0xbfbffc38 --- db interestingly enough, a crash dump could be written on the dump device (ad0b), but it was unusable: Checking for core dump... savecore: first and last dump headers disagree on /dev/ad0b savecore: unsaved dumps found but not saved Daniel ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ATAng probe updated please test
looks like and my problem with sil 3112 which still exist... - Original Message - From: Daniel Rock To: Soren Schmidt Cc: [EMAIL PROTECTED] Sent: Wednesday, September 03, 2003 16:15 PM Subject: Re: ATAng probe updated please test Just an additional notice: Booting in PIO mode (by setting hw.ata.ata_dma=0 in /boot/loader.conf): [...] GEOM: create disk ad0 dp=0xc10b3b70 ad0: 9671MB IBM-DTTA-351010 [20960/15/63] at ata0-master PIO4 GEOM: create disk ad1 dp=0xc10b3470 ad1: 1221MB Seagate Technology 1275MB - ST31276A [2482/16/63] at ata1-master PIO4 Waiting 2 seconds for SCSI devices to settle Mounting root from ufs:/dev/ad0a But if I try to set DMA mode later via atacontrol, the problem reappears: # atacontrol mode 0 udma2 udma2 Master = UDMA33 Slave = BIOSPIO # atacontrol mode 1 udma2 udma2 Master = WDMA2 Slave = BIOSPIO ad0: WARNING - WRITE_DMA recovered from missing interrupt ad1: WARNING - READ_DMA recovered from missing interrupt ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ATAng probe updated please test
It seems Daniel Rock wrote: Just an additional notice: Booting in PIO mode (by setting hw.ata.ata_dma=0 in /boot/loader.conf): [...] GEOM: create disk ad0 dp=0xc10b3b70 ad0: 9671MB IBM-DTTA-351010 [20960/15/63] at ata0-master PIO4 GEOM: create disk ad1 dp=0xc10b3470 ad1: 1221MB Seagate Technology 1275MB - ST31276A [2482/16/63] at ata1-master PIO4 Waiting 2 seconds for SCSI devices to settle Mounting root from ufs:/dev/ad0a But if I try to set DMA mode later via atacontrol, the problem reappears: # atacontrol mode 0 udma2 udma2 Master = UDMA33 Slave = BIOSPIO # atacontrol mode 1 udma2 udma2 Master = WDMA2 Slave = BIOSPIO ad0: WARNING - WRITE_DMA recovered from missing interrupt ad1: WARNING - READ_DMA recovered from missing interrupt Hmm, I have no clue as to why this fails actually, I have to dig out my old Acer board and see what gives, if this was a generic problem noone would be able to use DMA... -Søren ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ATAng probe updated please test
On Mon, Sep 01, 2003 at 01:16:00PM +0200, Soren Schmidt wrote: I've gone over the probe code once again. Please test, and in case it fails to detect or misdetects anything, mail me the output of dmesg from a verbose boot, and state what devices actually are there. Hello, The new stuff still failed to detect properly my hardware. Whole dmesg is attached. But, mysteriously, after two reboots the problem vanished, and I can see my HW as I should: GEOM: create disk ad0 dp=0xc409ee70 ad0: 19546MB FUJITSU MPF3204AT [39714/16/63] at ata0-master UDMA66 GEOM: create disk ad1 dp=0xc409ed70 ad1: 39093MB FUJITSU MPG3409AH EF [79428/16/63] at ata0-slave UDMA66 acd0: CDROM CD-540E at ata1-master UDMA33 acd1: CDRW CD-W540E at ata1-slave UDMA33 cd0 at ata1 bus 0 target 0 lun 0 cd0: TEAC CD-540E 1.0A Removable CD-ROM SCSI-0 device cd0: 33.000MB/s transfers cd0: cd present [348277 x 2048 byte records] cd1 at ata1 bus 0 target 1 lun 0 cd1: TEAC CD-W540E 1.0C Removable CD-ROM SCSI-0 device cd1: 33.000MB/s transfers cd1: cd present [1 x 0 byte records] (this funny phantom CD inside of my drives is still there ;) I don't have any idea why this thing was not working in the begining. I did not touch anything, I swear. ;) Anyway, On the new kernel, reboot (after waiting for all the fsck's to finish) resulted in panic when syncer was called to flush everything. This has happened only once, I cannot reproduce it, yet the syncer problem (giving up on 1 buffer) persist. It is not a problem with the aio module, as I have removed it, and it still happens. Willing to provide more feedback, if I knew how.. greets, -- -- wrzask --= v =-- Winfried --===-- GG# 3838383 --- -- [EMAIL PROTECTED] --- [EMAIL PROTECTED] --===-- http://violent.dream.vg/ --- --= Ride the wild wind - push the envelope, don't sit on the fence, --- -- Ride the wild wind - live life on the razor's edge! =-- Queen -- Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #8: Tue Sep 2 00:08:11 CEST 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/MOONDANCE Preloaded elf kernel /boot/kernel/kernel at 0xc0546000. Preloaded elf module /boot/kernel/mga.ko at 0xc0546200. Preloaded elf module /boot/kernel/aio.ko at 0xc05462a8. Preloaded elf module /boot/kernel/acpi.ko at 0xc0546350. Calibrating clock(s) ... i8254 clock: 1193155 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter i8254 frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 600025865 Hz CPU: AMD Duron(tm) Processor (600.03-MHz 686-class CPU) Origin = AuthenticAMD Id = 0x630 Stepping = 0 Features=0x183f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR AMD Features=0xc044RSVD,AMIE,DSP,3DNow! Data TLB: 24 entries, fully associative Instruction TLB: 16 entries, fully associative L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative L2 internal cache: 1 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative real memory = 536805376 (511 MB) Physical memory chunk(s): 0x1000 - 0x0009efff, 647168 bytes (158 pages) 0x0056d000 - 0x1f6c9fff, 521523200 bytes (127325 pages) avail memory = 515391488 (491 MB) bios32: Found BIOS32 Service Directory header at 0xc00faee0 bios32: Entry = 0xfb350 (c00fb350) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf+0xb380 pnpbios: Found PnP BIOS data at 0xc00fbe50 pnpbios: Entry = f:be80 Rev = 1.0 Other BIOS signatures found: null: null device, zero device random: entropy source mem: memory I/O Pentium Pro MTRR support enabled npx0: math processor on motherboard npx0: INT 16 interface acpi0: VIA694 AWRDACPI on motherboard pci_open(1):mode 1 addr port (0x0cf8) is 0x pci_open(1a): mode1res=0x8000 (0x8000) pci_cfgcheck: device 0 [class=06] [hdr=00] is there (id=03051106) pcibios: BIOS version 2.10 Using $PIR table, 7 entries at 0xc00fdd00 PCI-Only Interrupts: 5 10 11 Location Bus Device Pin Link IRQs slot 1 08A 0x01 3 4 5 7 9 10 11 12 14 15 slot 1 08B 0x02 3 4 5 7 9 10 11 12 14 15 slot 1 08C 0x03 3 4 5 7 9 10 11 12 14 15 slot 1 08D 0x05 3 4 5 7 9 10 11 12 14 15 slot 2 09A 0x02 3 4 5 7 9 10 11 12 14 15 slot 2 09B 0x03 3 4 5 7 9 10 11 12 14 15 slot 2 09C 0x05 3 4 5 7 9 10 11 12 14 15 slot 2 09D 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 10A 0x03 3 4 5 7 9 10 11 12 14 15 slot 3 0 10B 0x05 3 4 5 7 9 10 11 12 14 15 slot 3 0 10C 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 10D 0x02 3 4 5 7 9 10 11 12 14 15 slot 4 0 11A 0x05 3 4 5 7 9 10 11 12 14 15 slot 4 0 11B 0x01 3 4 5 7
Re: ATAng probe updated please test
On Tue, Sep 02, 2003 at 10:23:02AM +0200, Jan Srzednicki wrote: I've gone over the probe code once again. Please test, and in case it fails to detect or misdetects anything, mail me the output of dmesg from a verbose boot, and state what devices actually are there. Hello, The new stuff still failed to detect properly my hardware. Whole dmesg is attached. But, mysteriously, after two reboots the problem vanished, and I can see my HW as I should: OK, the drive did not get detected once again. This seems to be pretty random. Anyway, On the new kernel, reboot (after waiting for all the fsck's to finish) resulted in panic when syncer was called to flush everything. This has happened only once, I cannot reproduce it, yet the syncer problem (giving up on 1 buffer) persist. It is not a problem with the aio module, as I have removed it, and it still happens. Willing to provide more feedback, if I knew how.. I've found this thing is related to ext2fs, as I stated in different thread. -- -- wrzask --= v =-- Winfried --===-- GG# 3838383 --- -- [EMAIL PROTECTED] --- [EMAIL PROTECTED] --===-- http://violent.dream.vg/ --- --= Ride the wild wind - push the envelope, don't sit on the fence, --- -- Ride the wild wind - live life on the razor's edge! =-- Queen -- ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ATAng probe updated please test
;), Mon, Sep 01, 2003 at 01:16:00PM +0200, Soren Schmidt said that I've gone over the probe code once again. Please test, and in case it fails to detect or misdetects anything, mail me the output of dmesg from a verbose boot, and state what devices actually are there. Thanks! -Søren hi problems still continued: [...] ATA_IDENTIFY recovered from missing interupt ATA_IDENTIFY status=1ERROR error=4ABORTED [...] in circle then i boot kernel from May 19 2003 see my previous mail to this mailing list for detail dmesg attached bye and have a nice day -- Archeologists near mount Sinai have discovered what is believed to be a missing page from the Bible. The page is currently being carbon dated in Bonn. If genuine it belongs at the beginning of the Bible and is believed to read To my darling Candy. All characters portrayed within this book are fictitous and any resemblance to persons living or dead is purely coincidental. The page has been universally condemned by church leaders. RED DWARF Series II Episode 2, Better Than Life - R Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-BETA #32: Mon May 19 15:01:33 CEST 2003 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/angel Preloaded elf kernel /boot.okay/kernel.old/kernel at 0xc04f8000. Timecounter i8254 frequency 1193182 Hz Timecounter TSC frequency 927106952 Hz CPU: Intel Pentium III (927.11-MHz 686-class CPU) Origin = GenuineIntel Id = 0x68a Stepping = 10 Features=0x383fbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real memory = 268435456 (256 MB) avail memory = 255422464 (243 MB) Pentium Pro MTRR support enabled npx0: math processor on motherboard npx0: INT 16 interface pcibios: BIOS version 2.10 Using $PIR table, 7 entries at 0xc00ede90 pcib0: ServerWorks NB6635 3.0LE host to PCI bridge at pcibus 0 on motherboard pci0: PCI bus on pcib0 pcib1: PCI-PCI bridge at device 1.0 on pci0 pci1: PCI bus on pcib1 fxp0: Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet port 0x1800-0x183f mem 0xb100-0xb10f,0xb110-0xb1100fff irq 11 at device 5.0 on pci1 fxp0: Ethernet address 00:50:8b:e9:e8:92 miibus0: MII bus on fxp0 inphy0: i82555 10/100 media interface on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pci1: display, VGA at device 6.0 (no driver attached) pci1: base peripheral at device 7.0 (no driver attached) atapci0: CMD 649 UDMA100 controller port 0x1840-0x184f,0x1864-0x1867,0x1858-0x185f,0x1860-0x1863,0x1850-0x1857 irq 10 at device 8.0 on pci1 ata2: at 0x1850 on atapci0 ata3: at 0x1858 on atapci0 xl0: 3Com 3c905C-TX Fast Etherlink XL port 0x2000-0x207f mem 0xb150-0xb150007f irq 11 at device 4.0 on pci0 xl0: Ethernet address: 00:04:76:9d:0c:cd miibus1: MII bus on xl0 ukphy0: Generic IEEE 802.3u media interface on miibus1 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab0: PCI-ISA bridge port 0xfc00-0xfc0f at device 15.0 on pci0 isa0: ISA bus on isab0 atapci1: ServerWorks ROSB4 UDMA33 controller port 0x2080-0x208f at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci1 ata1: at 0x170 irq 15 on atapci1 pci0: serial bus, USB at device 15.2 (no driver attached) pcib5: ServerWorks NB6635 3.0LE host to PCI bridge at pcibus 5 on motherboard pci5: PCI bus on pcib5 orm0: Option ROMs at iomem 0xe8000-0xe,0xd2000-0xdcfff,0xd-0xd07ff,0xc8000-0xc,0xc-0xc7fff on isa0 atkbdc0: Keyboard controller (i8042) at port 0x64,0x60 on isa0 atkbd0: AT Keyboard flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: PS/2 Mouse irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 fdc0: Enhanced floppy controller (i82077, NE72065 or clone) at port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: 1440-KB 3.5 drive on fdc0 drive 0 pmtimer0 on isa0 ppc0: Parallel port at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold ppbus0: Parallel port bus on ppc0 plip0: PLIP network interface on ppbus0 lpt0: Printer on ppbus0 lpt0: Interrupt-driven port ppi0: Parallel I/O on ppbus0 sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 unknown: PNP0401 can't assign resources (port) unknown: PNP0501 can't assign resources (port) unknown: PNP0501 can't assign resources (port) unknown: PNP0700 can't assign resources (port) unknown: PNP0c01 can't assign resources (memory) unknown: PNP0303 can't assign resources (port) unknown: PNP0f13 can't assign resources (irq) Timecounters tick every 10.000 msec ata0-slave: timeout waiting for interrupt ata0-slave: ATA
RE: ATAng probe updated please test
Soren Schmidt wrote on Monday, September 01, 2003 6:16 AM I've gone over the probe code once again. Please test, and in case it fails to detect or misdetects anything, mail me the output of dmesg from a verbose boot, and state what devices actually are there. I cvsupped after I saw this note, and the new kernel properly booted without any problem on my Asus A7V with Promise ATA-100 controller (I previously had problems wtih missing interrupts, a phantom ad6 drive, and a kernel panic due to a divide trap). Thanks for your work! Guy ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ATAng probe updated please test
Soren Schmidt schrieb: I've gone over the probe code once again. Please test, and in case it fails to detect or misdetects anything, mail me the output of dmesg from a verbose boot, and state what devices actually are there. Hi, again no luck. Same problem persists, the devices got probed correctly (two disks, each on its own channel), but cannot be accessed. Daniel SMAP type=01 base= len=0009fc00 SMAP type=01 base=0009fc00 len=0400 SMAP type=02 base=000f len=0001 SMAP type=02 base= len=0001 SMAP type=01 base=0010 len=03ef SMAP type=03 base=03ff3000 len=d000 SMAP type=04 base=03ff len=3000 Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #784: Tue Sep 2 17:32:45 CEST 2003 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/ROCK Preloaded elf kernel /boot/kernel/kernel at 0xc061f000. Calibrating clock(s) ... i8254 clock: 1193178 Hz Timecounter i8254 frequency 1193178 Hz quality 0 Calibrating TSC clock ... TSC clock: 300681454 Hz CPU: AMD-K6(tm) 3D processor (300.68-MHz 586-class CPU) Origin = AuthenticAMD Id = 0x580 Stepping = 0 Features=0x8001bfFPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX AMD Features=0x8800SYSCALL,3DNow! Data TLB: 128 entries, 2-way associative Instruction TLB: 64 entries, 1-way associative L1 data cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative L1 instruction cache: 32 kbytes, 32 bytes/line, 2 lines/tag, 2-way associative Write Allocate Enable Limit: 64M bytes Write Allocate 15-16M bytes: Enable Hardware Write Allocate Control: Disable real memory = 67043328 (63 MB) Physical memory chunk(s): 0x1000 - 0x0009, 651264 bytes (159 pages) 0x00646000 - 0x03ea7fff, 59121664 bytes (14434 pages) avail memory = 58634240 (55 MB) bios32: Found BIOS32 Service Directory header at 0xc00fb040 bios32: Entry = 0xfb4c0 (c00fb4c0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf+0xb4f0 pnpbios: Found PnP BIOS data at 0xc00fc130 pnpbios: Entry = f:c158 Rev = 1.0 Other BIOS signatures found: null: null device, zero device mem: memory I/O VESA: information block 56 45 53 41 00 02 00 01 00 01 00 00 00 00 22 00 00 01 40 00 00 01 0b 01 00 01 21 01 00 01 2a 01 00 01 00 01 01 01 10 01 11 01 12 01 03 01 13 01 14 01 15 01 05 01 16 01 17 01 18 01 07 01 19 01 VESA: 40 mode(s) found VESA: v2.0, 4096k memory, flags:0x0, mode table:0xc05540c2 (122) VESA: ATI MACH64 VESA: ATI Technologies Inc. MACH64GT 01.00 random: entropy source acpi0: GBTAWRDACPI on motherboard pci_open(1):mode 1 addr port (0x0cf8) is 0x8058 pci_open(1a): mode1res=0x8000 (0x8000) pci_cfgcheck: device 0 [class=06] [hdr=00] is there (id=154110b9) pcibios: BIOS version 2.10 Using $PIR table, 8 entries at 0xc00fdef0 PCI-Only Interrupts: 9 10 12 Location Bus Device Pin Link IRQs slot 1 08A 0x01 3 4 5 7 9 10 11 12 14 15 slot 1 08B 0x02 3 4 5 7 9 10 11 12 14 15 slot 1 08C 0x03 3 4 5 7 9 10 11 12 14 15 slot 1 08D 0x04 3 4 5 7 9 10 11 12 14 15 slot 2 09A 0x02 3 4 5 7 9 10 11 12 14 15 slot 2 09B 0x03 3 4 5 7 9 10 11 12 14 15 slot 2 09C 0x04 3 4 5 7 9 10 11 12 14 15 slot 2 09D 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 10A 0x03 3 4 5 7 9 10 11 12 14 15 slot 3 0 10B 0x04 3 4 5 7 9 10 11 12 14 15 slot 3 0 10C 0x01 3 4 5 7 9 10 11 12 14 15 slot 3 0 10D 0x02 3 4 5 7 9 10 11 12 14 15 slot 4 0 11A 0x04 3 4 5 7 9 10 11 12 14 15 slot 4 0 11B 0x01 3 4 5 7 9 10 11 12 14 15 slot 4 0 11C 0x02 3 4 5 7 9 10 11 12 14 15 slot 4 0 11D 0x03 3 4 5 7 9 10 11 12 14 15 slot 5 0 12A 0x01 3 4 5 7 9 10 11 12 14 15 slot 5 0 12B 0x02 3 4 5 7 9 10 11 12 14 15 slot 5 0 12C 0x03 3 4 5 7 9 10 11 12 14 15 slot 5 0 12D 0x04 3 4 5 7 9 10 11 12 14 15 embedded0 15A 0x05 3 4 5 7 9 10 11 12 14 15 embedded0 15B 0x06 3 4 5 7 9 10 11 12 14 15 embedded01A 0x01 3 4 5 7 9 10 11 12 14 15 embedded01B 0x02 3 4 5 7 9 10 11 12 14 15 embedded01C 0x03 3 4 5 7 9 10 11 12 14 15 embedded01D 0x04 3 4 5 7 9 10 11 12 14 15 embedded02A 0x59 3 4 5 7 9 10 11 12 14 15 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 7 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 15 func
ATAng probe updated please test
I've gone over the probe code once again. Please test, and in case it fails to detect or misdetects anything, mail me the output of dmesg from a verbose boot, and state what devices actually are there. Thanks! -Søren ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ATAng probe updated please test
Soren Schmidt wrote: I've gone over the probe code once again. Please test, and in case it fails to detect or misdetects anything, mail me the output of dmesg from a verbose boot, and state what devices actually are there. Thanks! -Søren Mine is working perfectly now (see below). With atapicam as well. Thankyou very much for your work! Regards, Matt. ad0: 76319MB ST380020A [155061/16/63] at ata0-master UDMA100 acd0: DVDROM Compaq DVD-ROM SD-616T at ata1-master PIO4 acd1: CDRW SAMSUNG CD-R/RW SW-240B at ata1-slave PIO4 cd0 at ata1 bus 0 target 0 lun 0 cd0: Compaq DVD-ROM SD-616T F304 Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: cd present [3284421 x 1835364913 byte records] cd1 at ata1 bus 0 target 1 lun 0 cd1: SAMSUNG CD-R/RW SW-240B R407 Removable CD-ROM SCSI-0 device cd1: 16.000MB/s transfers cd1: cd present [15421890 x 0 byte records] [EMAIL PROTECTED] root]# cdrecord --scanbus Cdrecord 2.00.3 (i386-unknown-freebsd5.1) Copyright (C) 1995-2002 Jörg Schilling Using libscg version 'schily-0.7' scsibus2: 2,0,0 200) 'Compaq ' 'DVD-ROM SD-616T ' 'F304' Removable CD-ROM 2,1,0 201) 'SAMSUNG ' 'CD-R/RW SW-240B ' 'R407' Removable CD-ROM ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ATAng probe updated please test
Matt wrote: Soren Schmidt wrote: I've gone over the probe code once again. Please test, and in case it fails to detect or misdetects anything, mail me the output of dmesg from a verbose boot, and state what devices actually are there. Thanks! -Søren Mine is working perfectly now (see below). With atapicam as well. Thankyou very much for your work! Regards, Matt. ad0: 76319MB ST380020A [155061/16/63] at ata0-master UDMA100 acd0: DVDROM Compaq DVD-ROM SD-616T at ata1-master PIO4 acd1: CDRW SAMSUNG CD-R/RW SW-240B at ata1-slave PIO4 cd0 at ata1 bus 0 target 0 lun 0 cd0: Compaq DVD-ROM SD-616T F304 Removable CD-ROM SCSI-0 device cd0: 16.000MB/s transfers cd0: cd present [3284421 x 1835364913 byte records] cd1 at ata1 bus 0 target 1 lun 0 cd1: SAMSUNG CD-R/RW SW-240B R407 Removable CD-ROM SCSI-0 device cd1: 16.000MB/s transfers cd1: cd present [15421890 x 0 byte records] [EMAIL PROTECTED] root]# cdrecord --scanbus Cdrecord 2.00.3 (i386-unknown-freebsd5.1) Copyright (C) 1995-2002 Jörg Schilling Using libscg version 'schily-0.7' scsibus2: 2,0,0 200) 'Compaq ' 'DVD-ROM SD-616T ' 'F304' Removable CD-ROM 2,1,0 201) 'SAMSUNG ' 'CD-R/RW SW-240B ' 'R407' Removable CD-ROM Actually saying that is this perfectly? There are no cd's in either of those two drives and it says cd present in that dmesg ? Matt. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: ATAng probe updated please test
I've gone over the probe code once again. I upgraded, and now my DVDROM (ata1-slave) is working again, but my Plextor 8/4/32A CDRW (ata1-master) still won't probe correctly. atacontrol list appears to send out the same message as before. dmesg atacontrol list output attached. Andrew Lankford Latest ATAng kernel (without atapicam): Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #18: Mon Aug 25 19:55:14 EDT 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/ARL5KERNEL Preloaded elf kernel /boot/kernel/kernel at 0xc04e2000. Preloaded elf module /boot/kernel/vesa.ko at 0xc04e2228. Preloaded elf module /boot/kernel/miibus.ko at 0xc04e22d4. Preloaded elf module /boot/kernel/if_sis.ko at 0xc04e2380. Preloaded elf module /boot/kernel/if_xl.ko at 0xc04e242c. Preloaded elf module /boot/kernel/snd_pcm.ko at 0xc04e24d8. Preloaded elf module /boot/kernel/snd_es137x.ko at 0xc04e2584. Preloaded elf module /boot/kernel/usb.ko at 0xc04e2634. Preloaded elf module /boot/kernel/ums.ko at 0xc04e26dc. Preloaded elf module /boot/kernel/agp.ko at 0xc04e2784. Preloaded elf module /boot/kernel/acpi.ko at 0xc04e282c. Calibrating clock(s) ... i8254 clock: 1193163 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter i8254 frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 737022692 Hz CPU: Intel Pentium III (737.02-MHz 686-class CPU) Origin = GenuineIntel Id = 0x686 Stepping = 6 Features=0x383f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real memory = 535736320 (510 MB) Physical memory chunk(s): 0x1000 - 0x0009efff, 647168 bytes (158 pages) 0x00509000 - 0x1f5c9fff, 520884224 bytes (127169 pages) avail memory = 515031040 (491 MB) bios32: Found BIOS32 Service Directory header at 0xc00f1430 bios32: Entry = 0xf0bf0 (c00f0bf0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf+0xdf0 pnpbios: Found PnP BIOS data at 0xc00fc070 pnpbios: Entry = f:c0a0 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: null: null device, zero device random: entropy source mem: memory I/O Pentium Pro MTRR support enabled VESA: information block 56 45 53 41 00 03 00 01 00 01 01 00 00 00 22 00 00 01 10 00 53 25 2e 01 00 01 40 01 00 01 63 01 00 01 1c 01 09 01 0a 01 0b 01 0c 01 1d 01 0e 01 00 01 27 01 28 01 01 01 10 01 11 01 12 01 02 01 VESA: 20 mode(s) found VESA: v3.0, 1024k memory, flags:0x1, mode table:0xc03fdc62 (122) VESA: Intel(R) 810, Intel(R) 815 Chipset Video BIOS VESA: Intel Corporation Intel(R) 810, Intel(R) 815 Chipset Hardware Version 0.0 npx0: math processor on motherboard npx0: INT 16 interface acpi0: ASUS CUSL2on motherboard pci_open(1):mode 1 addr port (0x0cf8) is 0x805c pci_open(1a): mode1res=0x8000 (0x8000) pci_cfgcheck: device 0 [class=06] [hdr=00] is there (id=11308086) pcibios: BIOS version 2.10 Using $PIR table, 10 entries at 0xc00f1360 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs slot 72540A 0x60 3 4 5 7 9 10 11 12 slot 72540B 0x61 3 4 5 7 9 10 11 12 embedded02A 0x60 3 4 5 7 9 10 11 12 embedded0 31A 0x60 3 4 5 7 9 10 11 12 embedded0 31B 0x61 3 4 5 7 9 10 11 12 embedded0 31C 0x6b 3 4 5 7 9 10 11 12 embedded0 31D 0x63 3 4 5 7 9 10 11 12 slot 1 19A 0x69 3 4 5 7 9 10 11 12 slot 1 19B 0x6a 3 4 5 7 9 10 11 12 slot 1 19C 0x6b 3 4 5 7 9 10 11 12 slot 1 19D 0x68 3 4 5 7 9 10 11 12 slot 2 1 10A 0x6a 3 4 5 7 9 10 11 12 slot 2 1 10B 0x6b 3 4 5 7 9 10 11 12 slot 2 1 10C 0x68 3 4 5 7 9 10 11 12 slot 2 1 10D 0x69 3 4 5 7 9 10 11 12 slot 3 1 11A 0x6b 3 4 5 7 9 10 11 12 slot 3 1 11B 0x68 3 4 5 7 9 10 11 12 slot 3 1 11C 0x69 3 4 5 7 9 10 11 12 slot 3 1 11D 0x6a 3 4 5 7 9 10 11 12 slot 4 1 12A 0x68 3 4 5 7 9 10 11 12 slot 4 1 12B 0x69 3 4 5 7 9 10 11 12 slot 4 1 12C 0x6a 3 4 5 7 9 10 11 12 slot 4 1 12D 0x6b 3 4 5 7 9 10 11 12 slot 5 1 13A 0x69 3 4 5 7 9 10 11 12 slot 5 1 13B 0x6a 3 4 5 7 9 10 11 12 slot 5 1 13C 0x6b 3 4 5 7 9 10 11 12 slot 5 1 13D 0x68 3 4 5 7 9 10 11 12 slot 6 1 14A 0x62 3 4 5 7 9 10 11 12 slot 6 1 14B 0x63 3 4 5 7 9 10 11 12 slot 6 1 14C 0x60 3 4 5 7 9 10 11 12 slot 6 1 14D 0x61 3 4 5 7 9 10 11 12 embedded18A 0x68 3 4 5 7 9 10 11 12 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: power button is handled as a fixed feature programming model. ACPI timer
Re: ATAng probe updated please test (ERRATA)
I upgraded, and now my DVDROM (ata1-slave) is working again, but my Plextor 8/4/32A CDRW (ata1-master) still won't probe correctly. atacontrol list appears to send out the same message as before. dmesg atacontrol list output attached. Andrew Lankford Crap, I attached the wrong file (an earlier boot). Sorry about that. Here we go again: Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.1-CURRENT #23: Mon Sep 1 10:32:42 EDT 2003 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/ARL5KERNEL Preloaded elf kernel /boot/kernel/kernel at 0xc04e4000. Preloaded elf module /boot/kernel/vesa.ko at 0xc04e4228. Preloaded elf module /boot/kernel/miibus.ko at 0xc04e42d4. Preloaded elf module /boot/kernel/if_sis.ko at 0xc04e4380. Preloaded elf module /boot/kernel/if_xl.ko at 0xc04e442c. Preloaded elf module /boot/kernel/snd_pcm.ko at 0xc04e44d8. Preloaded elf module /boot/kernel/snd_es137x.ko at 0xc04e4584. Preloaded elf module /boot/kernel/usb.ko at 0xc04e4634. Preloaded elf module /boot/kernel/ums.ko at 0xc04e46dc. Preloaded elf module /boot/kernel/agp.ko at 0xc04e4784. Preloaded elf module /boot/kernel/acpi.ko at 0xc04e482c. Calibrating clock(s) ... i8254 clock: 1193162 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter i8254 frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 737022114 Hz CPU: Intel Pentium III (737.02-MHz 686-class CPU) Origin = GenuineIntel Id = 0x686 Stepping = 6 Features=0x383f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real memory = 535736320 (510 MB) Physical memory chunk(s): 0x1000 - 0x0009efff, 647168 bytes (158 pages) 0x0050b000 - 0x1f5c9fff, 520876032 bytes (127167 pages) avail memory = 515022848 (491 MB) bios32: Found BIOS32 Service Directory header at 0xc00f1430 bios32: Entry = 0xf0bf0 (c00f0bf0) Rev = 0 Len = 1 pcibios: PCI BIOS entry at 0xf+0xdf0 pnpbios: Found PnP BIOS data at 0xc00fc070 pnpbios: Entry = f:c0a0 Rev = 1.0 pnpbios: OEM ID cd041 Other BIOS signatures found: null: null device, zero device random: entropy source mem: memory I/O Pentium Pro MTRR support enabled VESA: information block 56 45 53 41 00 03 00 01 00 01 01 00 00 00 22 00 00 01 10 00 53 25 2e 01 00 01 40 01 00 01 63 01 00 01 1c 01 09 01 0a 01 0b 01 0c 01 1d 01 0e 01 00 01 27 01 28 01 01 01 10 01 11 01 12 01 02 01 VESA: 20 mode(s) found VESA: v3.0, 1024k memory, flags:0x1, mode table:0xc0400c62 (122) VESA: Intel(R) 810, Intel(R) 815 Chipset Video BIOS VESA: Intel Corporation Intel(R) 810, Intel(R) 815 Chipset Hardware Version 0.0 npx0: math processor on motherboard npx0: INT 16 interface acpi0: ASUS CUSL2on motherboard pci_open(1):mode 1 addr port (0x0cf8) is 0x805c pci_open(1a): mode1res=0x8000 (0x8000) pci_cfgcheck: device 0 [class=06] [hdr=00] is there (id=11308086) pcibios: BIOS version 2.10 Using $PIR table, 10 entries at 0xc00f1360 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs slot 72540A 0x60 3 4 5 7 9 10 11 12 slot 72540B 0x61 3 4 5 7 9 10 11 12 embedded02A 0x60 3 4 5 7 9 10 11 12 embedded0 31A 0x60 3 4 5 7 9 10 11 12 embedded0 31B 0x61 3 4 5 7 9 10 11 12 embedded0 31C 0x6b 3 4 5 7 9 10 11 12 embedded0 31D 0x63 3 4 5 7 9 10 11 12 slot 1 19A 0x69 3 4 5 7 9 10 11 12 slot 1 19B 0x6a 3 4 5 7 9 10 11 12 slot 1 19C 0x6b 3 4 5 7 9 10 11 12 slot 1 19D 0x68 3 4 5 7 9 10 11 12 slot 2 1 10A 0x6a 3 4 5 7 9 10 11 12 slot 2 1 10B 0x6b 3 4 5 7 9 10 11 12 slot 2 1 10C 0x68 3 4 5 7 9 10 11 12 slot 2 1 10D 0x69 3 4 5 7 9 10 11 12 slot 3 1 11A 0x6b 3 4 5 7 9 10 11 12 slot 3 1 11B 0x68 3 4 5 7 9 10 11 12 slot 3 1 11C 0x69 3 4 5 7 9 10 11 12 slot 3 1 11D 0x6a 3 4 5 7 9 10 11 12 slot 4 1 12A 0x68 3 4 5 7 9 10 11 12 slot 4 1 12B 0x69 3 4 5 7 9 10 11 12 slot 4 1 12C 0x6a 3 4 5 7 9 10 11 12 slot 4 1 12D 0x6b 3 4 5 7 9 10 11 12 slot 5 1 13A 0x69 3 4 5 7 9 10 11 12 slot 5 1 13B 0x6a 3 4 5 7 9 10 11 12 slot 5 1 13C 0x6b 3 4 5 7 9 10 11 12 slot 5 1 13D 0x68 3 4 5 7 9 10 11 12 slot 6 1 14A 0x62 3 4 5 7 9 10 11 12 slot 6 1 14B 0x63 3 4 5 7 9 10 11 12 slot 6 1 14C 0x60 3 4 5 7 9 10 11 12 slot 6 1 14D 0x61 3 4 5 7 9 10 11 12 embedded18A 0x68 3 4 5 7 9 10 11 12 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: power button is handled as a fixed feature programming model. ACPI timer
