problems with drivers lge and miibus on D-Link DGE 500SX

[Robert Suetterlin]

Hello!

I'm using the D-Link DGE 500SX Gigabit Ethernet card which gives the
following (error) message during bootup:

lge0: Ethernet address: 00:50:ba:71:2d:c3
lge0: MII without any PHY!
device_probe_and_attach: lge0 attach returned 6

The correct Physical would be xmphy, which is correctly autoprobed under
-STABLE.  Do I have to configure something under CURRENT so that my
miibus physicals are detected?
My imphy on the fxp (EEPRO100) is detected ok.

Regards, Robert S.

-- 
Robert Suetterlin ([EMAIL PROTECTED])
phone: (+49)89 / 3-3546   fax: (+49)89 / 3-3950

To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message

problems with drivers lge and miibus on D-Link DGE 500SX

[Robert Suetterlin]

Hello!

I'm using the D-Link DGE 500SX Gigabit Ethernet card in two of my
computers.  One is running FreeBSD Current, the other runs Stable.  The
lge driver (and miibus with xmphy) worked well on both systems.

Somewhen between Juli this August this Year, the Current driver stopped
working with the following problem description:

lge0: Ethernet address: 00:50:ba:71:2d:c3
lge0: MII without any PHY!
device_probe_and_attach: lge0 attach returned 6

Sorry I did not notice the problem immediately, but all my systems are dual
homed and the default gateway is over 100MBit Ethernet.

Regards, Robert S.

-- 
Robert Suetterlin ([EMAIL PROTECTED])
phone: (+49)89 / 3-3546   fax: (+49)89 / 3-3950

To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message