On Thursday 05 June 2003 16:27, Jesse D. Guardiani wrote:
Quick question:
If I go ahead and install 5.1-RC1 now from ISO CDROM,
will I have access to packages that are newer than the
ones that come with FreeBSD 5.0-RELEASE? Or will they
be the same packages as 5.0-RELEASE? Or will I not have
On Thu, 3 Jul 2003, Greg 'groggy' Lehey wrote:
GgLI've just upgraded my laptop to a recent -CURRENT, and since then I've
GgLbeen having a lot of network problems. Here's a rough chronology:
GgL
GgL- Machine is a Dell Inspiron 7500, which I've been using with releases
GgL 4 and 5 of FreeBSD
TB --- 2003-07-03 06:11:22 - starting CURRENT tinderbox run for i386/i386
TB --- 2003-07-03 06:11:22 - checking out the source tree
TB --- cd /home/des/tinderbox/CURRENT/i386/i386
TB --- /usr/bin/cvs -f -R -q -d/home/ncvs update -Pd -A src
TB --- 2003-07-03 06:13:29 - building world
TB --- cd
On Thu, 3 Jul 2003, Josef Karthauser wrote:
Does anyone know why sysinstall complains,
Warning: Can't find the `5.1-CURRENT' distribution on this FTP
server. You may need to visit a different server for the release
you are trying to fetch or go to the Options menu and to set
Hi,
I have a ComPaq EVO N610c laptop. It runs FreeBSD 4.8S and Current. I've
some problems with the newcard/oldcard stuff. With acpi disabled the TI
1420 cardbus can't alloc any memory/irqs. With acpi enabled it looks if
it could work but cards fail to get memory address. I also tried using
Hi,
I've got the following panic, when I ran out of space. My system is from about
17 Jun. It acts as a NFS and Samba server, but panic happend at night, when no
activity on those daemons occurs. Write could happen through ssh (as I
suppose). The filesystems are UFS1 and UFS2. The one, on which I
On Thu, Jul 03, 2003 at 12:46:16AM -0700, Doug White wrote:
On Thu, 3 Jul 2003, Josef Karthauser wrote:
Does anyone know why sysinstall complains,
Warning: Can't find the `5.1-CURRENT' distribution on this FTP
server. You may need to visit a different server for the release
Op di 01-07-2003, om 10:07 schreef Nate Lawson:
Please download and try the new version. It correctly implements burst
mode to the best of the 2.0 spec. Like the previous message, please
report the appropriate dmesgs (acpi_ec0* and EC Waited*) and any
errors or regression. I've tested du -a
In message: [EMAIL PROTECTED]
Nate Lawson [EMAIL PROTECTED] writes:
: On Wed, 2 Jul 2003, Florian Smeets wrote:
: I set hw.acpi.ec.burst_mode=0 in loader.conf but when i was trying to
: chek if it was set to 0 with sysctl hw.acpi.ec.burst_mode i got :
:
: [EMAIL PROTECTED] [~] 15
In message: [EMAIL PROTECTED]
Harti Brandt [EMAIL PROTECTED] writes:
: my Avaya Wireless PC Card (actually seems to be a Lucent) stopped to
: work in my laptop as I updated the kernel today. It now says pcic0: Card
: type unrecognized by bridge is unsupported.. What does this mean and
In message: [EMAIL PROTECTED]
Harti Brandt [EMAIL PROTECTED] writes:
: I think the same problem was reported by Rob Holmes two weeks ago and by
: me (although with lesser detail) yesterday. I converted my kernel from
: OLDBUS to NEWBUS and now one out of four or five tries the card
H, I'm starting to think that it would make sense for someone to
buy/loan me a laptop that is having these problems. None of my
laptops are new enough to see the problems...
Warner
___
[EMAIL PROTECTED] mailing list
On Thu, 3 Jul 2003, M. Warner Losh wrote:
MWLIn message: [EMAIL PROTECTED]
MWLHarti Brandt [EMAIL PROTECTED] writes:
MWL: my Avaya Wireless PC Card (actually seems to be a Lucent) stopped to
MWL: work in my laptop as I updated the kernel today. It now says pcic0: Card
MWL: type
Hi.
On Thu, Jul 03, 2003 at 01:39:19PM +0200, Harti Brandt wrote:
Jul 3 09:18:29 harti kernel: wi0: Lucent Firmware: Station (7.52.1)
Well, I'm still seeing problems with my Lucent Card on -CURRENT (there
were postings here about that earlier, but Ican't provide details at the
moment as I
Hi all
I have a computer with 3 NIC's (10/100) and I am trying to set it up as
a gateway. In /etc/rc.conf I have:
ifconfig_rl1=inet 192.168.1.22 netmast 255.255.255.0 media 100baseTX
ifconfig_de0=inet 192.168.1.21 netmast 255.255.255.0 media 100baseTX
ifconfig_rl0=inet 192.168.1.20 netmast
On Thu, 3 Jul 2003, Oliver Brandmueller wrote:
OBHi.
OB
OBOn Thu, Jul 03, 2003 at 01:39:19PM +0200, Harti Brandt wrote:
OB Jul 3 09:18:29 harti kernel: wi0: Lucent Firmware: Station (7.52.1)
OB
OBWell, I'm still seeing problems with my Lucent Card on -CURRENT (there
OBwere postings here about
On Thu, 3 Jul 2003, M. Warner Losh wrote:
MWLIn message: [EMAIL PROTECTED]
MWLHarti Brandt [EMAIL PROTECTED] writes:
MWL: I think the same problem was reported by Rob Holmes two weeks ago and by
MWL: me (although with lesser detail) yesterday. I converted my kernel from
MWL: OLDBUS to
On 02-Jul-2003 Nate Lawson wrote:
On Wed, 2 Jul 2003, John Baldwin wrote:
On 01-Jul-2003 Nate Lawson wrote:
Please download and try the new version. It correctly implements burst
mode to the best of the 2.0 spec. Like the previous message, please
report the appropriate dmesgs (acpi_ec0*
On 03-Jul-2003 Kris Kennaway wrote:
Anyone's ears burning? :)
Kris
Booting [/boot/kernel/kernel]...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
If memory serves me right, Jesse D. Guardiani wrote:
If I go ahead and install 5.1-RC1 now from ISO CDROM,
will I have access to packages that are newer than the
ones that come with FreeBSD 5.0-RELEASE? Or will they
be the same packages as 5.0-RELEASE? Or will I not have
access to packages
Hello -
I have never been able to get 5-current on my laptop. I have tried 5.0-release,
5.1-release, and i try snapshots every few weeks or so.
I get an integer divide fault panic. I was wondering if it is possible on install, to
drop to a debugger? If so, what commands could i type that
hi,
i run a small program that writes to file, these are the numbers
Fbsdlocal disk nfs
--
4.8 44.86 42.54
5.1 34.37 16.42
are these values (MB/s) acceptable? comments?
while disk io is less
John,
It appears I may not be going insane after all. The file is received OK
from cvsup7 and from cvsup10. When I check out (using cvs co) from my
local repo or rsync the repo to another machine on my network here at
home, the file is corrupted. Looks like I've found some kind of issue
with
In article [EMAIL PROTECTED],
Cy Schubert [EMAIL PROTECTED] wrote:
It appears I may not be going insane after all.
I never suspected you of insanity. :-)
The file is received OK from cvsup7 and from cvsup10. When I check
out (using cvs co) from my local repo or rsync the repo to another
On Wed, 2 Jul 2003, Dan Nelson wrote:
In the last episode (Jul 02), Zhihui Zhang said:
Suppose someone ported XFS to FreeBSD, then what liscence can you use
without causing any legal trouble? You must use GNU, but the interface
code (VFS/vnode, bio, vnode, etc.) are already under BSD
TB --- 2003-07-03 16:00:04 - starting CURRENT tinderbox run for alpha/alpha
TB --- 2003-07-03 16:00:04 - checking out the source tree
TB --- cd /home/des/tinderbox/CURRENT/alpha/alpha
TB --- /usr/bin/cvs -f -R -q -d/home/ncvs update -Pd -A src
TB --- 2003-07-03 16:02:06 - building world
TB --- cd
The fsck discovered an unexpectd softupdate inconsistency,
listing the file in question.
Case closed.
Cheers,
--
Cy Schubert [EMAIL PROTECTED]http://www.komquats.com/
BC Government . FreeBSD UNIX
[EMAIL PROTECTED] .
On Thu, 3 Jul 2003, M. Warner Losh wrote:
In message: [EMAIL PROTECTED]
Nate Lawson [EMAIL PROTECTED] writes:
: On Wed, 2 Jul 2003, Florian Smeets wrote:
: I set hw.acpi.ec.burst_mode=0 in loader.conf but when i was trying to
: chek if it was set to 0 with sysctl
On 03-Jul-2003 Nate Lawson wrote:
On Thu, 3 Jul 2003, M. Warner Losh wrote:
In message: [EMAIL PROTECTED]
Nate Lawson [EMAIL PROTECTED] writes:
: On Wed, 2 Jul 2003, Florian Smeets wrote:
: I set hw.acpi.ec.burst_mode=0 in loader.conf but when i was trying to
: chek if it was
On Thu, 3 Jul 2003, John Baldwin wrote:
On 03-Jul-2003 Nate Lawson wrote:
On Thu, 3 Jul 2003, M. Warner Losh wrote:
I personally think that all tunable should be read-only (or rw if
possible) sysctls...
I'm still not sure why we have both mechanisms. Perhaps a useful approach
would
On Thu, 3 Jul 2003, Koop Mast wrote:
My machine an ASUS L3800S laptop.
Before the burst_ec patch I am using the hw.acpi.ec.event_driven sysctl.
This fixed the panic that occurred when switching to battery power.
When using the patch I get same behavior as in the pre-event_driven=1
days :)
Nate Lawson wrote:
On Thu, 3 Jul 2003, John Baldwin wrote:
On 03-Jul-2003 Nate Lawson wrote:
On Thu, 3 Jul 2003, M. Warner Losh wrote:
I personally think that all tunable should be read-only (or rw if
possible) sysctls...
I'm still not sure why we have both mechanisms. Perhaps a useful
On Thursday, July 3, 2003, at 10:28 AM, Nate Lawson wrote:
I personally think that all tunable should be read-only (or rw if
possible) sysctls...
I'm still not sure why we have both mechanisms. Perhaps a useful
approach
would be to sweep the tree for tunables and change them to sysctls with
On Thu, 3 Jul 2003, Michael Smith wrote:
[...]
No.
The two are different things, although arguably there should be more
integration.
The tunable mechanism exists to allow parameters to be set before the
kernel starts.
Things that are set with tunables tend to be things that used
On 03-Jul-2003 Florian Smeets wrote:
Nate Lawson wrote:
On Thu, 3 Jul 2003, John Baldwin wrote:
On 03-Jul-2003 Nate Lawson wrote:
On Thu, 3 Jul 2003, M. Warner Losh wrote:
I personally think that all tunable should be read-only (or rw if
possible) sysctls...
I'm still not sure why we have
On Thursday, July 3, 2003, at 10:59 AM, Julian Elischer wrote:
It makes sense to export the values set by tunables into the sysctl
MIB, but by their
very nature they're not suitable for conversion to sysctls.
= Mike
So is what you are saying...
tuneables should be converted at boot to
I'm sitting on a ISDN line right now, and I thought the newreno issues
had been solved, but by disabling newreno I get a distinctly better
web-surfing experience.
Is newreno working as designed right now, and if not, who is fixing it ?
--
Poul-Henning Kamp | UNIX since Zilog Zeus 3.20
On Thu, 3 Jul 2003, Danny Braniss wrote:
i run a small program that writes to file, these are the numbers
Fbsdlocal disk nfs
--
4.8 44.86 42.54
5.1 34.37 16.42
are these values (MB/s) acceptable?
TB --- 2003-07-03 19:37:36 - starting CURRENT tinderbox run for i386/pc98
TB --- 2003-07-03 19:37:36 - checking out the source tree
TB --- cd /home/des/tinderbox/CURRENT/i386/pc98
TB --- /usr/bin/cvs -f -R -q -d/home/ncvs update -Pd -A src
TB --- 2003-07-03 19:40:28 - building world
TB --- cd
I updated to the latest sources early today (CEST time) and install
rtld-elf with libmap support in order to give KSE another try.
However upon starting the Mozilla Firebird executable with very simple
/etc/libmap.conf:
libc_r.so.5 libkse.so.1
libc_r.so libkse.so
the computer
In message: [EMAIL PROTECTED]
Nate Lawson [EMAIL PROTECTED] writes:
: On Thu, 3 Jul 2003, M. Warner Losh wrote:
: In message: [EMAIL PROTECTED]
: Nate Lawson [EMAIL PROTECTED] writes:
: : On Wed, 2 Jul 2003, Florian Smeets wrote:
: : I set hw.acpi.ec.burst_mode=0 in
On Thu, 3 Jul 2003, Morten Rodal wrote:
I updated to the latest sources early today (CEST time) and install
rtld-elf with libmap support in order to give KSE another try.
However upon starting the Mozilla Firebird executable with very simple
/etc/libmap.conf:
libc_r.so.5 libkse.so.1
Did you ever figure out this problem? I'm running into the same thing?
Nick
ProHosting
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to [EMAIL PROTECTED]
Date: Tue, 1 Jul 2003 01:07:53 -0700 (PDT)
From: Nate Lawson [EMAIL PROTECTED]
Sender: [EMAIL PROTECTED]
Please download and try the new version. It correctly implements burst
mode to the best of the 2.0 spec. Like the previous message, please
report the appropriate dmesgs (acpi_ec0* and
What is the exact problem?
I think I had an issue with one of the config utilities not running so I clobbered it
and ran the
one in /usr/src/usr.sbin/ manually and things started to work again.
Did you have a different issue?
Dave
On Thursday, July 03, 2003, at 01:26PM, Nick Wood [EMAIL
Hi
Anyone else notice if the epN pccard device is broken in current?
The symptoms are the device failing to move packets shortly after
you begin to move traffic (a few secs). Pings start doing a no
buffer space available, and connections time out.
A kernel of 28th may is good, and if I back out
On Thu, Jul 03, 2003 at 05:31:02PM -0400, Daniel Eischen wrote:
On Thu, 3 Jul 2003, Morten Rodal wrote:
I updated to the latest sources early today (CEST time) and install
rtld-elf with libmap support in order to give KSE another try.
However upon starting the Mozilla Firebird executable
On Fri, 4 Jul 2003, Morten Rodal wrote:
On Thu, Jul 03, 2003 at 05:31:02PM -0400, Daniel Eischen wrote:
On Thu, 3 Jul 2003, Morten Rodal wrote:
I updated to the latest sources early today (CEST time) and install
rtld-elf with libmap support in order to give KSE another try.
However
On Thu, 3 Jul 2003, Kris Kennaway wrote:
I think there is a README in the ports/packages/i386 directory stating
that -current packages are not currently being built.
250-(* - packages-5-current is currently unavailable .. sorry for the
250- inconvenience)
Erm, I'm not sure why
On Thu, 3 Jul 2003, Socketd wrote:
I have a computer with 3 NIC's (10/100) and I am trying to set it up as
a gateway. In /etc/rc.conf I have:
ifconfig_rl1=inet 192.168.1.22 netmast 255.255.255.0 media 100baseTX
ifconfig_de0=inet 192.168.1.21 netmast 255.255.255.0 media 100baseTX
Hello,
Please take a look at this:
=
[snowlap] ~$ who am i
richard ttyp5Jul 4 00:34 (:0.0)
[snowlap] ~$ su -
Password:
Last login: Fri Jul 4 00:31:17 on ttyp5
snowlap# who am i
root ttyp5Jul 4 00:34
On Fri, Jul 04, 2003 at 12:46:10AM +0200, Richard Arends wrote:
Hello,
Please take a look at this:
=
[snowlap] ~$ who am i
richard ttyp5Jul 4 00:34 (:0.0)
[snowlap] ~$ su -
Password:
Last login: Fri Jul 4
On Fri, Jul 04, 2003 at 12:46:10AM +0200, Richard Arends wrote:
Hello,
Please take a look at this:
=
[snowlap] ~$ who am i
richard ttyp5Jul 4 00:34 (:0.0)
[snowlap] ~$ su -
Password:
Last login: Fri Jul 4
On Fri, Jul 04, 2003 at 01:58:13AM +0300, Ruslan Ermilov wrote:
On Fri, Jul 04, 2003 at 12:46:10AM +0200, Richard Arends wrote:
Hello,
Please take a look at this:
=
[snowlap] ~$ who am i
richard ttyp5Jul
On Fri, Jul 04, 2003 at 02:02:09AM +0300, Ruslan Ermilov wrote:
[...]
Doh, forgot to mention: the following patch fixes it for me.
A better version:
%%%
Index: su
===
RCS file: /home/ncvs/src/etc/pam.d/su,v
retrieving revision
On Thu, 2003-07-03 at 15:46, Richard Arends wrote:
Hello,
Please take a look at this:
=
[snowlap] ~$ who am i
richard ttyp5Jul 4 00:34 (:0.0)
[snowlap] ~$ su -
Password:
Last login: Fri Jul 4 00:31:17 on
On Thu, Jul 03, 2003 at 06:18:37PM +0300, Danny Braniss wrote:
hi,
i run a small program that writes to file, these are the numbers
Fbsdlocal disk nfs
--
4.8 44.86 42.54
5.1 34.37 16.42
are
Hi all,
I've been converting the dc(4) driver to the busdma API, which is a
necessary step before having it working on sparc64. Given that this
driver supports many different chipsets, and that I only have one of
these cards, it would be very helpful if people could test this patch
and
The machine with the tape drive has no OS installed on it yet. Anyway, I
tried it with vnode. dump runs without any problem. But, restore
stops after a few minutes. I did the following:
% mdconfig -a -t vnode -f img0 -u md0
% gbde init /dev/md0 -i -L lock
I change the sector size to 2048.
% gbde
On Fri, Jul 04, 2003 at 01:58:13AM +0300, Ruslan Ermilov wrote:
On Fri, Jul 04, 2003 at 12:46:10AM +0200, Richard Arends wrote:
Hello,
Please take a look at this:
...
Of course the latest 'who am i' should return 'richard' and not(!) 'root'
Yes, this sucks. DES, could you please fix
On Thu, 2003-07-03 at 20:04, John Baldwin wrote:
I am running FreeBSD-Current on my Compaq Evo N800c laptop.
I am having problems getting it to work with ACPI. I have compiled my
own acpi_dsdt.aml file using iasl and am using it. I keep getting this
panic whenever I boot into FreeBSD
Hi. Last night I upgraded to the most recent -current source and
rebuilt everything, and decided on building the kernel to try the new
SCHED_ULE scheduler (I had been using SCHED_4BSD before). Alas, the
experiment did not go well; every time I booted the machine, I got a
panic just as the system
62 matches
Mail list logo
