Just got this one (using bsd scheduler):
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x24
fault code = supervisor read, page not present
instruction pointer = 0x8:0xc04b8f3b
stack pointer = 0x10:0xcd619bc4
frame pointer = 0x10:0xcd6
"Scott M. Likens" writes:
> Ah, such a strong comment from such a strong member. I would have thought
> you were to high to stoop that low?
>
> But I guess it's good to be flamed for being honest? is it not?
Please don't encourage flames and flamers by responding to them.
M
--
Mark Murray
iumo
In message <[EMAIL PROTECTED]>, Andrew Gallatin
writes:
>
>Poul-Henning Kamp writes:
> >
> > As soon as these uses of cloning code has been removed, I will move
> > the floppy and CD drivers under GEOM, paving the way for the
> > significant changes to the buf/VM system which some of you have
> >
Hi
It seems to be a recent problem. The hardware is OK, both Windows XP
(which I use very seldom) and Gentoo Linux do not exhibit any
problems.
Basically one will get random signals as I have got in build- and
installworld. It's impossible to complete make -j2 buildworld on my
machine, but sometim
On Mon, 20 Oct 2003, Vallo Kallaste wrote:
VK>Hi
VK>
VK>It seems to be a recent problem. The hardware is OK, both Windows XP
VK>(which I use very seldom) and Gentoo Linux do not exhibit any
VK>problems.
VK>Basically one will get random signals as I have got in build- and
VK>installworld. It's impo
Steve Kargl wrote:
On Sun, Oct 19, 2003 at 03:48:58PM -0700, Kris Kennaway wrote:
On Sun, Oct 19, 2003 at 03:13:41PM -0700, Steve Kargl wrote:
I sent in an email *along time ago* about this type
of problem. See the fallout due to revision 1.24
of lib/libc/stdio/findfp.c. IMHO, all shared lib
On Mon, Oct 20, 2003 at 10:51:50AM +0200, John Angelmo wrote:
> Are there any hints how to solve my problem, I'm willing to give it a
> shot ;)
We're discussing it, please be patient.
kris
pgp0.pgp
Description: PGP signature
Hi,
I have Proxim Orinoco 802.11b/g card, Atheros 5212. I need set ad-hoc mode
(ifconfig ath0 mode 11g mediaopt adhoc), but it doesn't work. Is it supported this
mode?
Tin
Hugo Boss - Boss Intense
Nová vůně pro že
In message: <[EMAIL PROTECTED]>
Scott Long <[EMAIL PROTECTED]> writes:
: We need to resolve this before 5.2 in some fashion. It looks like the
: easiest thing to do is bump libm. Is this advisable?
The problem with bumping libm is that we also need, strictly speaking,
to bump all lib
In message: <[EMAIL PROTECTED]>
Steve Kargl <[EMAIL PROTECTED]> writes:
: I sent in an email *along time ago* about this type
: of problem. See the fallout due to revision 1.24
: of lib/libc/stdio/findfp.c. IMHO, all shared libraries
: versions should have been bumped in going from 4
In message: <[EMAIL PROTECTED]>
Andre Guibert de Bruet <[EMAIL PROTECTED]> writes:
: What does pciconf -vl show on the affected machine(s)?
I think you'll find that not relevant. I've seen this behavior with
the newer ata code and IDE controllers that had no IDE devices
connected to t
/rescue is always causing trouble with me here. make world falls over
with:
===> rescue/rescue
install -s -o root -g wheel -m 555 rescue /rescue
install -o root -g wheel -m 555 nextboot_FIXED /rescue/nextboot.sh
install: /rescue/nextboot.sh: Not a directory
*** Error code 71
Stop in /u/src
Hi,
have severe problems accessing usb devices as non-root user.
In this case a Canon Powershot G5 camera.
I want to download pics from my digicam using digikam application
as user "andreas".
The devices that are being used by digikam:
[EMAIL PROTECTED] ~ lsof | grep digikam | grep /dev
digikam
Hi
~~~cut~~~
- Original Message - From: "Sam Leffler" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, October 18, 2003 11:02 AM
Subject: Fwd: cvs commit: src/sys/net80211 ieee80211_output.c
ieee80211_var.h
This fixes adhoc mode for wi devices. Adhoc mode is still not working
co
In message <[EMAIL PROTECTED]>, Andreas Klemm wri
tes:
>Hi,
>
>have severe problems accessing usb devices as non-root user.
>In this case a Canon Powershot G5 camera.
>
>I want to download pics from my digicam using digikam application
>as user "andreas".
Use the devfs(8) command to request change
I have a problem with nss_ldap on FreeBSD.
After tranfer users from /etc/passwd to ldap directories my users cannot
send a mail via /usr/bin/mail | /usr/sbin/sendmail program:
ldap_user$ id
uid=1000(test) gid=1000(test) groups=1000(test)
ldap_user$ pw usershow test
test:*:1000:1000::0:0:test:/tm
Hello Andre,
Monday, October 20, 2003, 4:07:40 AM, you wrote:
> I was just wondering if anyone was currently having a look at the
> possibility of porting OpenBSD's CARP. I have a bit of free time on my
> hands but wouldn't want to duplicate anyone's work...
we are working on a pf / pfsync port.
I just got a kernel panic after making /usr/ports/x11/nvidia-driver.
I did a make, make reinstall. Then I did a kldunload nvidia.ko
and got:
nvidia0: detached
panic: malloc(9)/free(9) confusion.
Probably freeing with wrong type, but maybe not here.
Debugger("panic")
Stopped at Debugger+0x54: xch
"Scott M. Likens" <[EMAIL PROTECTED]> writes:
> Ah, such a strong comment from such a strong member. I would have
> thought you were to high to stoop that low?
>
> But I guess it's good to be flamed for being honest? is it not?
Pot, kettle, black.
DES
--
Dag-Erling Smørgrav - [EMAIL PROTECTED]
On Mon, Oct 20, 2003 at 12:19:46PM +0200, Poul-Henning Kamp wrote:
> In message <[EMAIL PROTECTED]>, Andreas Klemm wri
> tes:
> >Hi,
> >
> >have severe problems accessing usb devices as non-root user.
> >In this case a Canon Powershot G5 camera.
> >
> >I want to download pics from my digicam using
Well, I tried the drivers from intel.com, but they are indeed for 4.x kernels and
don't work on 5.1. An odd thing I noticed is that the driver in 5.1 has the same
versionnumber as the driver on intel.com, but obviously isn't the same.
Sysctl hw.em0.rx_int_delay was already on 0, so that didn't h
In message <[EMAIL PROTECTED]>, Andreas Klemm writ
es:
>1) /etc/devfs.conf with:
>permugen1 0666
>permugen1.1 0666
>permugen1.2 0666
>permugen1.3 0666
I would probably just use a wildcard:
permugen* 0666
>1st needs a command like
>
Poul-Henning,
many thanks for you kind guidance to the wonderful world of
devfs (which I never had to tweak in the past) ;-)
On Mon, Oct 20, 2003 at 01:44:50PM +0200, Poul-Henning Kamp wrote:
> I would probably just use a wildcard:
> permugen* 0666
The wildcard feature is really fine !
In message <[EMAIL PROTECTED]>, Andreas Klemm writ
es:
>Hint: here again we seem to be missing a manpage: devfs.rules(5).
>
>In /etc/rc.subr you see for example a reference to this manpage,
>but it doesn't exist.
I'm sure we'd be more than happy to see somebody (hint hint!)
send manual page text
I got this message while copying some files from my
windows box (via samba) to my FreeBSD box. The files
were going to ad4/ad6 (vinum raid). All I did was
cvsup src and ports during the copy and also, after
the cvsup was done, installed apache2.
uname:
FreeBSD mp3.earthlink.net 5.1-CURRENT FreeB
On Mon, Oct 20, 2003 at 10:27:38AM +0200, Harti Brandt wrote:
> On Mon, 20 Oct 2003, Vallo Kallaste wrote:
>
> VK>Hi
> VK>
> VK>It seems to be a recent problem. The hardware is OK, both Windows XP
> VK>(which I use very seldom) and Gentoo Linux do not exhibit any
> VK>problems.
> VK>Basically one
On Mon, 20 Oct 2003, M. Warner Losh wrote:
> In message: <[EMAIL PROTECTED]>
> Scott Long <[EMAIL PROTECTED]> writes:
> : We need to resolve this before 5.2 in some fashion. It looks like the
> : easiest thing to do is bump libm. Is this advisable?
>
> The problem with bumping libm
On Mon, 20 Oct 2003, Mark Santcroos wrote:
MS>On Mon, Oct 20, 2003 at 10:27:38AM +0200, Harti Brandt wrote:
MS>> On Mon, 20 Oct 2003, Vallo Kallaste wrote:
MS>>
MS>> VK>Hi
MS>> VK>
MS>> VK>It seems to be a recent problem. The hardware is OK, both Windows XP
MS>> VK>(which I use very seldom) and Ge
On Mon, Oct 20, 2003 at 03:29:04PM +0200, Harti Brandt wrote:
> MS>> I have the same MB just with 1800+ processors. I had to reduce the CPU
> MS>> frequency by about 10% in the BIOS setup to get the machine stable. I
> MS>> assume the problem is actually the memory.
> MS>
> MS>Couldn't the followin
On Mon, Oct 20, 2003 at 10:27:38AM +0200, Harti Brandt
<[EMAIL PROTECTED]> wrote:
> VK>It seems to be a recent problem. The hardware is OK, both Windows XP
> VK>(which I use very seldom) and Gentoo Linux do not exhibit any
> VK>problems.
> VK>Basically one will get random signals as I have got in
On Mon, Oct 20, 2003 at 03:20:56PM +0200, Mark Santcroos wrote:
> On Mon, Oct 20, 2003 at 10:27:38AM +0200, Harti Brandt wrote:
> > On Mon, 20 Oct 2003, Vallo Kallaste wrote:
> >
> > VK>Hi
> > VK>
> > VK>It seems to be a recent problem. The hardware is OK, both Windows XP
> > VK>(which I use very
On Mon, Oct 20, 2003 at 02:40:00PM +0200, Poul-Henning Kamp wrote:
> >Hint: here again we seem to be missing a manpage: devfs.rules(5).
> >
> >In /etc/rc.subr you see for example a reference to this manpage,
> >but it doesn't exist.
>
> I'm sure we'd be more than happy to see somebody (hint hint!)
On Mon, Oct 20, 2003 at 11:55:57AM +0200, C. Kukulies wrote:
> ===> rescue/rescue
> install -s -o root -g wheel -m 555 rescue /rescue
> install -o root -g wheel -m 555 nextboot_FIXED /rescue/nextboot.sh
> install: /rescue/nextboot.sh: Not a directory
> *** Error code 71
>
> Stop in /u/src/res
On Mon, Oct 20, 2003 at 10:50:02AM -0400, Barney Wolff wrote:
> On Mon, Oct 20, 2003 at 03:20:56PM +0200, Mark Santcroos wrote:
> > On Mon, Oct 20, 2003 at 10:27:38AM +0200, Harti Brandt wrote:
> > > On Mon, 20 Oct 2003, Vallo Kallaste wrote:
> > >
> > > VK>Hi
> > > VK>
> > > VK>It seems to be a r
On Mon, 20 Oct 2003, Christian Brueffer wrote:
CB>On Mon, Oct 20, 2003 at 10:50:02AM -0400, Barney Wolff wrote:
CB>> On Mon, Oct 20, 2003 at 03:20:56PM +0200, Mark Santcroos wrote:
CB>> > On Mon, Oct 20, 2003 at 10:27:38AM +0200, Harti Brandt wrote:
CB>> > > On Mon, 20 Oct 2003, Vallo Kallaste wro
On Mon, Oct 20, 2003 at 09:09:47AM +0200, Soren Schmidt wrote:
> Just got this one (using bsd scheduler):
>
> Fatal trap 12: page fault while in kernel mode
> fault virtual address = 0x24
> fault code = supervisor read, page not present
> instruction pointer = 0x8:0xc04b8f3b
> s
On Mon, Oct 20, 2003 at 01:44:50PM +0200, Poul-Henning Kamp wrote:
> In message <[EMAIL PROTECTED]>, Andreas Klemm writ
> es:
> >[EMAIL PROTECTED] ~ ls -l /dev/ugen*
> >crw-r--r-- 1 root operator 114, 0 Oct 20 13:14 /dev/ugen0
> >crw-r--r-- 1 root operator 114, 2 Oct 20 13:14 /dev/ugen0.2
In message <[EMAIL PROTECTED]>, Bernd Walter writes:
>On Mon, Oct 20, 2003 at 01:44:50PM +0200, Poul-Henning Kamp wrote:
>> In message <[EMAIL PROTECTED]>, Andreas Klemm writ
>> es:
>> >[EMAIL PROTECTED] ~ ls -l /dev/ugen*
>> >crw-r--r-- 1 root operator 114, 0 Oct 20 13:14 /dev/ugen0
>> >crw-r
I had a fair amount of time over the last week running in disconnected
operation, and realized I had too many cables under my desk, so I spent a
bit of time exploring the FreeBSD console code. After reading a FREENIX
paper this summer on a Linux ethernet console driver, I took a pass at
implement
From: "Дейтер Александр Валерьевич" <[EMAIL PROTECTED]>
> I have a problem with nss_ldap on FreeBSD.
> After tranfer users from /etc/passwd to ldap directories my users cannot
> send a mail via /usr/bin/mail | /usr/sbin/sendmail program:
>
:
> Any ideas ?
>
What are the contents of the /usr/local/
Greg 'groggy' Lehey schrieb:
Provide a dump? Analyse the problem yourself? This *is* -CURRENT,
after all.
I can reproduce this here (same MB). I don't think it's a vinum problem,
but vinum seems to be a good way to reproduce the bug. I set up a stripe
over 2 SATA disks, newfs it, run "iozone
On Mon, Oct 20, 2003 at 12:13:27PM -0400, Robert Watson wrote:
>
> I had a fair amount of time over the last week running in disconnected
> operation, and realized I had too many cables under my desk, so I spent a
> bit of time exploring the FreeBSD console code. After reading a FREENIX
> paper t
TB --- 2003-10-20 16:00:01 - tinderbox 2.2 running on cueball.rtp.FreeBSD.org
TB --- 2003-10-20 16:00:01 - starting CURRENT tinderbox run for alpha/alpha
TB --- 2003-10-20 16:00:01 - checking out the source tree
TB --- cd /home/des/tinderbox/CURRENT/alpha/alpha
TB --- /usr/bin/cvs -f -R -q -d/home/
from my dmesg:
[snip]
pcm0: port 0xb800-0xb8ff irq 5 at device 1.0 on pci2
pcm0: failed to enable memory mapping!
pcm0:
malloc() of "64" with the following non-sleepable locks held:
exclusive sleep mutex pcm0:mixer (pcm mixer) r = 0 (0xc2d34540) locked @
/usr/src/sys/dev/sound/pcm/mixer.c:322
m
On Monday, Oct 20, 2003, at 19:02 Europe/Budapest, Alexander Leidinger
wrote:
Greg 'groggy' Lehey schrieb:
Provide a dump? Analyse the problem yourself? This *is* -CURRENT,
after all.
I can reproduce this here (same MB). I don't think it's a vinum
problem,
but vinum seems to be a good way to
>> I have a problem with nss_ldap on FreeBSD.
>> After tranfer users from /etc/passwd to ldap directories my users cannot
>> send a mail via /usr/bin/mail | /usr/sbin/sendmail program:
>What are the contents of the /usr/local/lib/sasl*/Sendmail.conf file?
>Is pwcheck_method set to saslauthd, or s
On Mon, Oct 20, 2003 at 07:15:19PM +0200, Paolo Pisati wrote:
>
> from my dmesg:
> [snip]
> pcm0: port 0xb800-0xb8ff irq 5 at device 1.0 on pci2
> pcm0: failed to enable memory mapping!
> pcm0:
> malloc() of "64" with the following non-sleepable locks held:
> exclusive sleep mutex pcm0:mixer (pc
On Mon, Oct 20, 2003 at 10:03:52AM -0700, Steve Kargl wrote:
> On Mon, Oct 20, 2003 at 12:13:27PM -0400, Robert Watson wrote:
> >
> > I had a fair amount of time over the last week running in disconnected
> > operation, and realized I had too many cables under my desk, so I spent a
> > bit of time
On Mon, 20 Oct 2003, Steve Kargl wrote:
> On Mon, Oct 20, 2003 at 12:13:27PM -0400, Robert Watson wrote:
> >
> > I had a fair amount of time over the last week running in disconnected
> > operation, and realized I had too many cables under my desk, so I spent a
> > bit of time exploring the Free
On Mon, Oct 20, 2003 at 08:06:10AM -0700, David O'Brien wrote:
> On Mon, Oct 20, 2003 at 11:55:57AM +0200, C. Kukulies wrote:
> > ===> rescue/rescue
> > install -s -o root -g wheel -m 555 rescue /rescue
> > install -o root -g wheel -m 555 nextboot_FIXED /rescue/nextboot.sh
> > install: /rescue
On Sat, 18 Oct 2003, Greg J. wrote:
> On Sat, 18 Oct 2003 15:55:52 -0700 (PDT)
> Doug White <[EMAIL PROTECTED]> wrote:
>
> > On Wed, 15 Oct 2003, Doug White wrote:
> >
> > > > >
> > > > > > Anyone else having these errors? Is there a way to fix it?
> > > > >
> > > > > What's attached to the ports?
C. Kukulies wrote:
/rescue is always causing trouble with me here. make world falls over
with:
===> rescue/rescue
install -s -o root -g wheel -m 555 rescue /rescue
install -o root -g wheel -m 555 nextboot_FIXED /rescue/nextboot.sh
install: /rescue/nextboot.sh: Not a directory
*** Error code
On Mon, Oct 20, 2003 at 10:37:00AM -0700, Kris Kennaway wrote:
> Unfortunately none of the sound developers have been interested in
> looking at the locking problems in the code.
=(
> > acquiring duplicate lock of same type: "pcm channel"
> > 1st pcm0:record:0 @ /usr/src/sys/dev/sound/pcm/sound
Does FreeBSD 5.1-Current actually work with the PCVT driver.
I've been unable to get any output to the console after the loader
starts the kernel load with PCVT.
If anyone's got a working configuration with PCVT I'd love to get
a copy of their kernel configuration... I've moved up to 5.1-Current
On Mon, Oct 20, 2003 at 05:08:26PM +0200, Christian Brueffer wrote:
> On Mon, Oct 20, 2003 at 10:50:02AM -0400, Barney Wolff wrote:
> > On Mon, Oct 20, 2003 at 03:20:56PM +0200, Mark Santcroos wrote:
> > > On Mon, Oct 20, 2003 at 10:27:38AM +0200, Harti Brandt wrote:
> > > > On Mon, 20 Oct 2003, Va
William Pechter wrote:
> Does FreeBSD 5.1-Current actually work with the PCVT driver.
>
> I've been unable to get any output to the console after the loader
> starts the kernel load with PCVT.
>
> If anyone's got a working configuration with PCVT I'd love to get
> a copy of their kernel configur
Hi,
i updated my -current box yesterday from cvs to FreeBSD 5.1-CURRENT #6: Sun
Oct 19 17:40:10 CEST 2003.
Now i'm not able to attach gbde encrypted filesystems - regardless if it's a
disk image created with mdconfig, or a partition on harddisk.
gdbe attach works without any error message, but w
Thorsten Schroeder wrote:
Hi,
i updated my -current box yesterday from cvs to FreeBSD 5.1-CURRENT #6: Sun
Oct 19 17:40:10 CEST 2003.
Now i'm not able to attach gbde encrypted filesystems - regardless if it's a
disk image created with mdconfig, or a partition on harddisk.
[...]
update your sources
In message <[EMAIL PROTECTED]>, Thorsten Schroeder writes:
>Hi,
>
>i updated my -current box yesterday from cvs to FreeBSD 5.1-CURRENT #6: Sun
>Oct 19 17:40:10 CEST 2003.
>
>Now i'm not able to attach gbde encrypted filesystems - regardless if it's a
>disk image created with mdconfig, or a partitio
TB --- 2003-10-20 18:12:23 - tinderbox 2.2 running on cueball.rtp.FreeBSD.org
TB --- 2003-10-20 18:12:23 - starting CURRENT tinderbox run for i386/i386
TB --- 2003-10-20 18:12:23 - checking out the source tree
TB --- cd /home/des/tinderbox/CURRENT/i386/i386
TB --- /usr/bin/cvs -f -R -q -d/home/ncvs
> ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.LNKU._CRS] (Node
> 0xc40e49c0), AE_AML_UNINITIALIZED_LOCAL
> ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.LNKU._CRS] (Node
> 0xc40e49c0), AE_AML_UNINITIALIZED_LOCAL
This means your AML is lousy. Try some of
Christoph P. Kukulies wrote:
[ stuff removed ]
>>You're missing the point of /rescue. It MUST be in / to be of any use.
>
>
> Yeah, but what do if the partition overflows?
Plan ahead next time. Maybe take a backup, and remove redundancies or
unnecessary files. You could simply resize your s
I have a strange panic during the isa pnp code that does not occur with a
5.0-release kernel. I have tried enabling and disabling acpi. it does
not effect this panic one way or another. This is a kernel from -current
10/20 (today). I'm not sure how to get this to boot with no way to disable
pnp
I happily installed 5.1 on this laptop over the network using my NETGEAR
FA410TX PCMCIA card, but on updating to -CURRENT the attach fails.
Verbose boots from both 5.1-RELEASE and -CURRENT are appended, but the
vital difference is this:
ed1: at port 0x100-0x11f irq 11 function 0 config 32 on pc
Fails on usr.bin/wall as follows, cvsup'ed as of ~8pm EST:
--
stage 2.1: cleaning up the object tree
--
cd /usr/src; MAKEOBJDIRPREFIX=/usr/obj MACHINE_ARCH=i386 MACHINE=i386
CP
From: "Alex Deiter" <[EMAIL PROTECTED]>
> >> I have a problem with nss_ldap on FreeBSD.
> >> After tranfer users from /etc/passwd to ldap directories my users
cannot
> >> send a mail via /usr/bin/mail | /usr/sbin/sendmail program:
>
> >What are the contents of the /usr/local/lib/sasl*/Sendmail.con
First of all, as someone noted with disk-at-once, DVD+R (which is
always disk-at-once) doesn't entirely burn properly. I havn't been
able to nail it down, but certain ISO images work and certain ones
don't.
This all started screwing up with ATAng. At first, ATAng didn't
support atapicam, but tha
From: "Scot W. Hetzel" <[EMAIL PROTECTED]>
> From: "Alex Deiter" <[EMAIL PROTECTED]>
> > >> I have a problem with nss_ldap on FreeBSD.
> > >> After tranfer users from /etc/passwd to ldap directories my users
> cannot
> > >> send a mail via /usr/bin/mail | /usr/sbin/sendmail program:
> >
> > >What
Happens to me too :(. I've been trying to get that darn nvidia module to
load in the latest current branch without hosing my system.
I'm not sure what the magic formula is, but it was working before I
recompiled the kernel for ipfilter support.
Currently the nvidia module loads ok, but when I tr
atapicam seems to have ceased being functional as well.
Performing OPC...
/usr/local/bin/cdrecord: Input/output error. send opc: scsi sendcmd:
retryable error
CDB: 54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
David Gilbert wrote:
First of all, as someone noted with disk-at-once,
On Mon, 20 Oct 2003, Peter wrote:
> I have been reading that page and I have the keyboard working, but I
> fail to see how this will help a user that only has a USB Keyboard
> that wants to use FreeBSD5.1 and is unable to install it due to the
> lack of USB support from the start.
Some BIOSes of
In message: <[EMAIL PROTECTED]>
[EMAIL PROTECTED] writes:
: On Thu, Oct 16, 2003 at 09:32:55AM -0600, M. Warner Losh wrote:
: > ...
: > : You should use devd instead of pccardd in -current.
: > : See devd(8) and devd.conf(8).
: >
: > That's one problem, but not the problem. The proble
In message: <[EMAIL PROTECTED]>
Mark Valentine <[EMAIL PROTECTED]> writes:
: ed1: at port 0x100-0x11f irq 11 function 0 config 32 on pccard0
: -ed1: bpf attached
: -ed1: address 00:48:54:c0:99:7b, type Linksys (16 bit)
: -miibus0: on ed1
: -ukphy0: on miibus0
: -ukphy0: OUI 0x08001
I'd remove all the .depend files and try again.
Warner
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
M. Warner Losh wrote:
I'd remove all the .depend files and try again.
Warner
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
I've tried that one- I'm no
In message: <[EMAIL PROTECTED]>
Scott W <[EMAIL PROTECTED]> writes:
: M. Warner Losh wrote:
:
: >I'd remove all the .depend files and try again.
: >
: >Warner
: >___
: >[EMAIL PROTECTED] mailing list
: >http://lists.freebsd.org/mailman/listin
M. Warner Losh wrote:
In message: <[EMAIL PROTECTED]>
Scott W <[EMAIL PROTECTED]> writes:
: M. Warner Losh wrote:
:
: >I'd remove all the .depend files and try again.
: >
: >Warner
: >___
: >[EMAIL PROTECTED] mailing list
: >http://lists.free
> > > my /usr/local/lib/sasl2/Sendmail.conf:
> > > pwcheck_method: auxprop
> > > auxprop_plugin: sasldb
> > Is the Sendmail.conf file the same as the FreeBSD file on the Solaris 8
> > system?
yes of course. On Solaris8 box and FreeBSD box i have a identical
configuration.
> Does sasldblistusers2
Hi all,
BACKGROUND:
After a recent purchase of a Palm Tungsten W, I've been spending a few
hours getting the synchronization working in FreeBSD (which hasn't been
an easy task). I've almost got it all up and running, by using a PPP
over Serial over USB setup, but I have a small problem remainin
Harti Brandt wrote:
> On Mon, 20 Oct 2003, Mark Santcroos wrote:
> MS>On Mon, Oct 20, 2003 at 10:27:38AM +0200, Harti Brandt wrote:
> MS>> On Mon, 20 Oct 2003, Vallo Kallaste wrote:
> MS>> VK>Basically one will get random signals as I have got in build- and
> MS>> VK>installworld. It's impossible t
fajri >> more stable-supfile|grep release
*default release=cvs tag=RELENG_4
==
# make release CHROOTDIR=/home/fajri/data/root BUILDNAME=FAJRI
CVSROOT=/home/fajri/data/usr RELEASETAG=RELENG_4
if [ -f /etc/resolv.conf ]; then cp -p /etc/resolv.con
Barney Wolff wrote:
> I don't think so. I tried that on my A7M266D with no effect. I believe
> something in recent pmap code doesn't like this mobo, or maybe dual
> athlons in general. I can run RELENG_5_1 rock solid, and -current from
> 9/24/03 rock solid, but -current from 10/3 or later gets r
82 matches
Mail list logo
