Re: nforce4 USB 2.0 problem

On Saturday 26 August 2006 02:28, Bruce Burden wrote: >Hi folks, > > Any suggestion on this issue: > I'm not sure if it helps, but could you have tried to install my new USB driver, and see if the problem is the same: # # SVN is available from /usr/ports/devel/subversion # svn --username a

Callout for USB device driver testers

Hi, I need testers for the following USB device drivers: if_aue, if_axe, if_cdce, if_cue, if_kue # # How to install the new USB driver: # # # First get all the sources: # svn --username anonsvn --password anonsvn \ checkout svn://svn.turbocat.net/i4b # # The following commands will # in

Re: USB wireless sticks

On Friday 29 September 2006 14:38, Allix Davis wrote: > Ive had a look in the hardware list for the i386 and cannot see a list of > USB wireless sticks, does anyone know which ones work out-the-box ? More wireless USB sticks will be supported in not too long. Currently there is only "if_ural". Se

Re: Slimtype DVDRW SOSw-833S/VRS2 ATA/ATAPI

On Sunday 12 November 2006 15:58, ANdrei wrote: > i thought you have an issue with _all_ types of CDs, hence my suggestion. > I am pretty sure that if you just can't listen to audio CDs (but data CDs > work) it's not a _hardware_ issue, and this would not be the proper list > for it (but I might be

Re: keyboard + if_nfe oddity

On Thursday 12 July 2007 19:44, Tony Holmes wrote: > Okay, here's an odd one. > > I have an Asus M2NPV-VM board using the nfe driver from > http://www.f.csce.kyushu-u.ac.jp/~shigeaki/software/freebsd-nfe.html > > Traffic is moderate (approx 7Mbps) and every couple of days, the > nfe device just sto

Re: how to setup internet access via GPRS/EDGE network using Nokia 6230 mobile phone

Hi, On Wednesday 10 October 2007, williamkow wrote: > Could anybody advise me on how to enable internet access (GPRS/EDGE) in > GSM network, using Nokia mobile phone (USB cable connect to computer). > Please provide me the exact PORT name to install to FreeBSD 6.2 system, > also please assist me o

Re: ZTE MG478 usbmodem

On Sunday 06 January 2008, Eimar Koort wrote: > Hi all. > > Recently i bought ZTE CDMA2000 1X EV-DO Wireless Data Terminal (model > MG478). > So far i have no luck to get it work under FreeBSD (6.2). > When i connect this device i get: > > Dec 27 16:22:06 laptop kernel: uhub4: device problem (SET_A

Re: ZTE MG478 usbmodem

On Monday 07 January 2008, Eimar Koort wrote: > On Jan 7, 2008 2:08 AM, Jeff Palmer <[EMAIL PROTECTED]> wrote: > > This may be an obvious question to some, and not so obvious to others. > > Did you load the ucomm and umodem kernel modules? > > > > kldload umodem (which may load ucomm, not sure) > >

Re: Recommendation for wireless network card (PCI/USB)

On Tuesday 15 January 2008, Nate Eldredge wrote: > Hi folks, > > I am looking to get a wireless Ethernet card (802.11g) for my desktop > FreeBSD box. I would appreciate hearing from anyone who has found a card > that works well. It should be PCI or USB. Ideally, I'd prefer one with a > fully ope

Thinking about buying a new computer - attack code for Intel chips

Hi, According to the latest news on Slashdot there are now exploits going around attacking INTEL CPU bugs. Does anyone have a clue about what architectures and CPUs are safe? My computer is getting old and I might buy a new one. Any recommendations for a safe choice? --HPS

Re: IP35-E USB problems

On Wednesday 16 July 2008, Justin Hall wrote: > Hello All, > > I am having troubles with getting a machine with an ABIT IP35-E (ICH9 > chipset) board to boot fully. It hangs after probing uhub1. I have updated > the BIOS and rebuilt from the latest STABLE sources in the CVS repository > to no avail

Re: ]F1] Usb modem Driver for Freebsd

On Thursday 17 July 2008, baran xyz wrote: > Hi > im a slackware linux user i decided use FreeBSD now but FreeBSD dont work > with my usb modem i can run my usb adsl modem with eciadsl driver => > http://eciadsl.flashtux.org/index.php Also There are eciadsl driver for > Freebsd but it is under deve

Re: Patch for correct determine & work uplcom R232-USB Profilic chips PL2303HX

Hi Borodin, Please make a PR, attach your patch and assign it to USB so that it does not get lost. --HPS On Wednesday 15 October 2008, Borodin Oleg wrote: > Patch for correct determine & work uplcom with R232-USB Profilic > PL2303HX chips > > Borodin Oleg > Kaliningrad, Russia > > --- ./sys/de

Increasing "outsider" spam on FreeBSD lists

Hi, Re: Why are the Zionist leaders in Israel so happy about the new President? This kind of e-mails have nothing to do here and should be deleted from the archive. And regarding the subject: I don't know. It's not my business. There are enough people tracking the middle-east conflict already.

[WAS: Spam from Lawrence Auster]

Hi, Has someone tried calling this guy? I "think" his Microsoft Server might be hacked or someone has put freebsd lists up there for fun? Am I right that this is the originating IP: telnet ip72-196-247-230.dc.dc.cox.net 23 +Phone: "1 212 865 1284" seems valid. Maybe some new-yorkers should ca

Re: [WAS: Spam from Lawrence Auster]

Sorry about the previous e-mail. --HPS ___ freebsd-hardware@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any mail to "freebsd-hardware-unsubscr...@freebsd.org"

Re: Modem GSM/GPRS

On Friday 13 February 2009, Alberto Mijares wrote: > Hello everybody, > > I have an Enfora EDG1228 GSM/GPRM modem, which should be used to send > SMS. Seems not to be natively supported by FreeBSD 7.0: > > #dmesg > [...] > ugen0: on uhub0 > > > Alberto Mijares > > Any suggestion about it? Can you

Re: USB SD, MMC, MS, CF card reader?

On Wednesday 11 November 2009 16:37:45 Krassimir Slavchev wrote: > Hi All, > > I have an old USB card reader which is not recognized by 8.0. > The reader is based on a C-Media CM320L chip. > > Does this reader need special handling or umass driver can be used? > > # usbconfig -u 7 -a 2 dump_info >

Re: USB SD, MMC, MS, CF card reader?

On Friday 13 November 2009 08:19:11 Krassimir Slavchev wrote: > Hans Petter Selasky wrote: > > On Wednesday 11 November 2009 16:37:45 Krassimir Slavchev wrote: > >> Hi All, > >> > >> I have an old USB card reader which is not recognized by 8.0. > >>

Re: does a delock 61609 USB + Gigabit pcmcia card work with freebsd?

On Monday 10 January 2011 19:58:06 Christof Schulze wrote: > Hello, > > does anyone have experience with this piece of equipment on freebsd? > > http://www.delock.de/produkte/gruppen/PCMCIA/Delock_USB20_CardBus_Karte_mit > _Gigabit_LAN_Port_61609.html?setLanguage=EN > > Description > This USB2.0

Re: Keyboard repeat issues with Dell Optiplex 980s

On Wednesday 19 January 2011 15:51:41 Steve Polyack wrote: > On 01/19/11 08:48, Steve Polyack wrote: > > On 1/18/2011 5:56 PM, Jeremy Chadwick wrote: > >> On Tue, Jan 18, 2011 at 04:40:13PM -0500, Steve Polyack wrote: > >>> We've recently upgraded a few desktop workstations from Dell > >>> Optiplex

Re: Advanced disk format at WD20EARS: what should "camcontrol identify" show?

On Monday 04 April 2011 14:57:55 Ivan Voras wrote: > On 04/04/2011 08:10, Lev Serebryakov wrote: > > Hello, Alexander. > If you just replace a non-4K drive in a RAID5 with a 4K drive, it is > very likely that there would be alignment problems with that drive. Some tools like fdisk don't work, bec

Re: SES/SAF-TE + SATA == SEMB!

On Friday 27 May 2011 09:00:51 Alexander Motin wrote: > YAY! > > So now three questions: > 1. Does anybody else have alike hardware and wish to test it? > 2. Patch reviews are welcome. > 3. Is there any software except share/examples/ses working with ses(4) > and/or some good use practices? Does

Re: linux' cdc-acm equivalent for Benq-Siemens E61 modem driver

On Saturday 25 June 2011 05:27:35 Benediktus Anindito wrote: > i want to use an old Benq-Siemens E61 for sms gateway purpose. in > linux, the phone can be detected properly and i can send sms with > gammu. but in FreeBSD, it doesn't load a driver. > dmesg says: > ugen0.2: at usbus0 Try kldload um

Re: How to debug USB hardware issues

On Friday 04 November 2011 02:01:45 Alberto Mijares wrote: > Hi, > > I have a SMS gateway with FreeBSD 8.2 RELEASE on old hardware > (Pentium4). It has plugged a modem Enfora SA-EL, GSM-GPRS, via USB. > > The modem has been working fine for years. However, since it's plugged > to this server, th

Re: How to debug USB hardware issues

On Saturday 05 November 2011 15:19:14 Alberto Mijares wrote: > > What does dmesg say when this failure occurs? > > > > Do you see the following sysctl: > > > > sysctl hw.usb.no_cs_fail > > > > I would start turn on debugging in the modem driver, compile kernel with > > options USB_DEBUG, and the

Re: How to debug USB hardware issues

On Wednesday 16 November 2011 01:52:18 Alberto Mijares wrote: > USB_ERR Look for: USB_ERR_STALLED USB_ERR_TIMEOUT --HPS ___ freebsd-hardware@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-hardware To unsubscribe, send any ma

Re: 9.0 on ProLiant G5

On Sunday 11 March 2012 17:40:42 Jim Pazarena wrote: > Alex Keda wrote, On 2011-12-04 10:46 AM: > > 03.12.2011 03:20, Jim Pazarena пишет: > >> I am very unsure 'where' to post these observations. > >> > >> I have both an HP ProLiant DL380 G7 > >> and an HP DL185 G5 > >> > >> while 9.0B2 installs

Re: 9.0 on ProLiant G5

On Monday 12 March 2012 19:20:40 Alex Keda wrote: > On 12.03.2012 11:52, Hans Petter Selasky wrote: > > On Sunday 11 March 2012 17:40:42 Jim Pazarena wrote: > >> Alex Keda wrote, On 2011-12-04 10:46 AM: > >>> 03.12.2011 03:20, Jim Pazarena пишет: > >>&g

Re: 9.0 on ProLiant G5

On Friday 16 March 2012 06:51:33 Alex Keda wrote: > On 15.03.2012 21:26, John Baldwin wrote: > > On Tuesday, March 13, 2012 5:59:57 am Alex Keda wrote: > > How I can do it? > And, I have only USB keyboard If your system is setup correctly, you should be able to press CTRL+ALT+ESC and end up in

Re: JMS539 SuperSpeed -> SATA II bridge, Q77 chipset XHCI on 9-Stable

On Thursday 24 May 2012 00:24:53 Daniel Mayfield wrote: > I have a new Q77 chipset Core i5 machine with a J-Micron JMS539 based 4 > disk JBOD (Sans Digital TRU+4B) attached to the USB3 ports on the machine. > The device only shows up as HiSpeed (USB2.0) rather than SuperSpeed > (USB3.0). I've upd

Re: VIA VL8xx USB 3.0 controller supported?

On Tuesday 04 December 2012 20:00:20 Ronald F. Guilmette wrote: > I just recently purchased one of these: > > http://www.ianker.com/anker-uspeed-use-3.0-pci-express-card/product/68UPPC > IE-2S20PU > > Given that the ads for it say that it is 100% compatible with the Intel > xHCI specification, I

FreeBSD hardware support database?

Hi, Does anyone know what happened to http://freebsd.0fees.net Is this perhaps related to the recent dyndns's nuke everyone that doesn't pay operation or whoever is behind that? I think this kind of database is useful when looking for supported hardware, although it dumps quite a lot of inform

Re: Atheros AR9002U-2NG based TP-LINK TL-WN822N Ver:2.0 - adding support to FreeBSD

On 07/18/13 17:39, CeDeROM wrote: Hello :-) Hi, The atheros driver has the endpoint numbers hardcoded. I recommend using relative indexes for each interface. Should be trivial to fix. I'll leave that for the author of the uath driver. --HPS ugen1.3: at usbus1 uath0: on usbus1 uath0: c

Re: USB audio devices and FreeBSD

On 12/17/13 00:25, grarpamp wrote: Seems there's a lot of traditionally analog audio stuff (turntables, cassettes, radio, receivers, etc) on the market that can output the audio over USB in 16bit/44.1kHz (or 16bit/48kHz 'selectable'). Presumably this is for easy playback / ripping on a Windows [u

Re: USB storage device not recognized

On 08/30/14 20:42, grarpamp wrote: The GENERIC 8 STABLE r269631 i386 kernel on a Pentium 4 Prescott ICH4 era motherboard does nothing when a Sony ICD-PX333 is plugged in. I believe it should present as mass storage. Other mass storage devices such as cameras etc work ok in the same USB port. How

Re: USB storage device not recognized

On 08/31/14 23:38, grarpamp wrote: Please send output from: usbconfig -d X.Y dump_device_desc dump_curr_config_desc regarding your device. Nothing happens in verbose dmesg when I plug in the device, other than the device itself turns on. If I plug in another device, such as a USB memory stick t

Re: USB storage device not recognized

On 09/02/14 23:39, grarpamp wrote: Is there a way to actively probe out for a device from a usb port? [The other ports act the same way... a usbstick is recognized, this device isn't.] The problem was bad cable mating... power pair connected but data pair did not. Cutting back some plastic s

Re: USB ethernet adapter support

On 09/17/14 19:58, Ross Penner wrote: The following is a discussion I had on the freebsd-questions list. I've decided to take the route of buying an adapter that works on FreeBSD 10 Release but, on suggestion, I thought I would ask on these lists if there was anywhere I could mail my useless (to

Re: USB ethernet adapter support

On 09/19/14 18:18, Ross Penner wrote: On Fri, 19 Sep 2014, at 09:01 AM, Hans Petter Selasky wrote: On 09/17/14 19:58, Ross Penner wrote: The following is a discussion I had on the freebsd-questions list. I've decided to take the route of buying an adapter that works on FreeBSD 10 Releas

Re: webcamd for integrated ricoh webcam on sony vaio VGN-SZ4XN/C laptop (linux driver r5u870)

On 11/26/14 15:08, Giuseppe Pagnoni wrote: Dear all, I apologize for reposting this here, by I am trying with no success to make the camera on my laptop work under FreeBSD 10.1 i386. The laptop is a Vaio VGN-SZ4XN/C, and the integrated webcam is a Ricoh-made one. Under Linux, it is recognized as

Re: webcamd for integrated ricoh webcam on sony vaio VGN-SZ4XN/C laptop (linux driver r5u870)

On 11/26/14 16:39, Giuseppe Pagnoni wrote: Here's a link to the source code, just in case (but it's for Linux): http://avilella.googlepages.com/r5u870_patched.tar.bz2 Hi, I'm a bit short on time now. I think if you google the freebsd-multimedia list there was posted a howto you can add new

Re: Real vs available memory

On 12/09/14 17:24, pat...@patpro.net wrote: hmm my bad. strange indeed to read hw.machine i386 when it's 64 bit capable. Maybe you can build and install a 64-bit kernel only, and the re-boot, but userspace will still be 64-bit :-) --HPS ___ freeb

Re: Real vs available memory

On 12/09/14 17:28, Hans Petter Selasky wrote: Maybe you can build and install a 64-bit kernel only, and the re-boot, but userspace will still be 64-bit :-) ... userspace will still be 32-bit ... --HPS ___ freebsd-hardware@freebsd.org mailing list

Re: Bluetooth USB Host Controller Atheros Communications

On 05/25/15 03:06, Alberto Mijares wrote: Hi guys, I've been looking for a while how to enable my bluetooth adapter with no success. Hardware info is attached, I hope you can help me or I can help you to find a solution. Hi, Have you tried : kldload ubt ? --HPS _

Re: Bluetooth USB Host Controller Atheros Communications

On 05/25/15 16:42, Alberto Mijares wrote: On Mon, May 25, 2015 at 7:09 AM, Hans Petter Selasky wrote: On 05/25/15 03:06, Alberto Mijares wrote: Hi guys, I've been looking for a while how to enable my bluetooth adapter with no success. Hardware info is attached, I hope you can help me

Re: Bluetooth USB Host Controller Atheros Communications

On 05/26/15 00:24, Alberto Mijares wrote: Should be: kldload ng_ubt Any difference? Since this is the first instruction in section 31.5.1 from the handbook, this was the first command I typed. The module is already loaded. However # ls /dev/ubt* ls: No match. Should the device be recogni

Re: Bluetooth USB Host Controller Atheros Communications

On 05/26/15 08:44, Hans Petter Selasky wrote: On 05/26/15 00:24, Alberto Mijares wrote: Should be: kldload ng_ubt Any difference? Since this is the first instruction in section 31.5.1 from the handbook, this was the first command I typed. The module is already loaded. However # ls /dev

Re: PCIe to USB to PCIe

On 09/04/15 19:01, Michael Fuckner wrote: Hi, I don't see any active components, so I believe it is still PCIe (just via an USB Connector) Regards, Michael! Hi, Maybe it is running the VESA BIOS code on the cards, making them usable. Is this device supporting the USB video class perhaps?

Re: Is here any work on USB Attached SCSI (UAS/UASP) support?

On 11/25/16 14:46, Lev Serebryakov wrote: $subj. Don't mix it with UMASS, which is, obviously, supported for many years. I've tried to find mentions of UASP in sources (CURRENT) and find nothing, but maybe it is well-hidden? I'm asking because now I see very interesting products on market, li

Re: Is here any work on USB Attached SCSI (UAS/UASP) support?

On 11/25/16 21:30, Lev Serebryakov wrote: Intel's ones? ASMedia's ones? Anyway, UASP is new protocol, but it is SCSI at its core, so sit should be new transport layer for CAM? Yes, UASP is using SCSI. I think INTELs XHCIs support it, but others may not. The whole concept about USB streams ha

Re: Intel's Skylake and Kaby Lake CPUs have nasty microcode bug

On 06/26/17 18:55, Julian H. Stacey wrote: FYI: https://www.theregister.co.uk/2017/06/25/intel_skylake_kaby_lake_microcode_bug/ By Richard Chirgwin 25 Jun 2017 at 23:22 Intel's Skylake and Kaby Lake CPUs have nasty microcode bug ... "users need to disable hyper-threading "immediately"" For tho

Re: USB Attached SCSI (UAS/UASP) support and fallback to BOT

On 11/22/17 09:22, r...@brazilmail.com wrote: Has support for UAS/UASP (ASMedia 115x chipsets etc.) been added to FreeBSD (following Lev Serebryakov's post in Nov 2016)? Can someone with a UAS/UASP HDD enclosure (docking station) report on what happens when it's connected... does it fall back to

Re: Dell R630 unable to detect USB, can't boot

On 02/04/18 23:47, Lee Brown wrote: Booting FreeBSD11.1-RELENG from a USB stick, loader works fine keyboard allows selection, kernel loads and starts OK, gets as far as detecting USB devices and stops there. imgur for a screenshot. Tried safe mode same occurrence. C

Re: Dell R630 unable to detect USB, can't boot

On 02/13/18 14:45, Hans Petter Selasky wrote: On 02/04/18 23:47, Lee Brown wrote: Booting FreeBSD11.1-RELENG from a USB stick, loader works fine keyboard allows selection, kernel loads and starts OK, gets as far as detecting USB devices and stops there.  imgur <https://imgur.com/a/psn0H&g

Re: Dell R630 unable to detect USB, can't boot

On 02/13/18 19:52, Lee Brown wrote: On Tue, Feb 13, 2018 at 6:00 AM, Hans Petter Selasky wrote: On 02/13/18 14:45, Hans Petter Selasky wrote: On 02/04/18 23:47, Lee Brown wrote: Booting FreeBSD11.1-RELENG from a USB stick, loader works fine keyboard allows selection, kernel loads and

Re: Dell R630 unable to detect USB, can't boot

On 02/13/18 23:00, Lee Brown wrote: On Tue, Feb 13, 2018 at 12:56 PM, Hans Petter Selasky wrote: On 02/13/18 19:52, Lee Brown wrote: On Tue, Feb 13, 2018 at 6:00 AM, Hans Petter Selasky wrote: On 02/13/18 14:45, Hans Petter Selasky wrote: On 02/04/18 23:47, Lee Brown wrote: Booting

Re: Dell R630 unable to detect USB, can't boot

On 02/15/18 06:24, Lee Brown wrote: I do find it curious that the loader is able to work the USB hardware but not the kernel. The loader is using the BIOS's USB code. Usually there is a handover from BIOS to OS, maybe that's where it's broken. --HPS __

Re: USB sound DAC

On 07/24/18 11:54, Axel Rau wrote: Hi all, I’m looking for recommendations for a USB sound D/A device for a gstreamer application. The motherboard in use is http://www.supermicro.com/products/motherboard/atom/x10/a1sri-2758f.cfm I have no experience with FreeBSD sound at all. Any hints

Re: kernel: uhub_reattach_port: giving up port reset - device vanished

On 11/23/18 6:51 PM, tech-lists wrote: Hi, On a 12.0-BETA2 system, am seeing lots of this in /var/log/messages: uhub_reattach_port: giving up port reset - device vanished uhub_reattach_port: giving up port reset - device vanished uhub_reattach_port: giving up port reset - device vanished last

Re: kernel: uhub_reattach_port: giving up port reset - device vanished

On 11/24/18 9:42 AM, Hans Petter Selasky wrote: On 11/23/18 6:51 PM, tech-lists wrote: Hi, On a 12.0-BETA2 system, am seeing lots of this in /var/log/messages: uhub_reattach_port: giving up port reset - device vanished uhub_reattach_port: giving up port reset - device vanished

Re: timeouts on USB ISP programmer

On 4/7/22 13:33, Axel Rau wrote: Hi all, my DIAMEX-AVR-USB gets timeouts while talking to the target: - - - root@home2l:/ # avrdude -c stk500v2 -p t85 -P /dev/cuau1 -t -v -i 10 avrdude: Version 6.4 Copyright (c) Brian Dean, http://www.bdmicro.com/ Copyright (c) Joerg Wunsch

Re: timeouts on USB ISP programmer

On 4/7/22 14:12, Hans Petter Selasky wrote: On 4/7/22 13:33, Axel Rau wrote: Hi all, my DIAMEX-AVR-USB gets timeouts while talking to the target: - - - root@home2l:/ #    avrdude -c stk500v2 -p t85 -P /dev/cuau1 -t -v -i 10 avrdude: Version 6.4   Copyright (c) Brian Dean, http

Re: timeouts on USB ISP programmer

On 4/7/22 15:46, Axel Rau wrote: Hmm. What mewans ’serial’ in this case? Serial is this: iSerialNumber = 0x0003 <19331-49101-552> usb:19331-49101-552 --HPS

Re: timeouts on USB ISP programmer

On 4/7/22 15:46, Axel Rau wrote: Am 07.04.2022 um 15:26 schrieb Hans Petter Selasky : On 4/7/22 14:12, Hans Petter Selasky wrote: On 4/7/22 13:33, Axel Rau wrote: Hi all, my DIAMEX-AVR-USB gets timeouts while talking to the target: - - - root@home2l:/ #avrdude -c stk500v2 -p t85 -P

Re: Accessing I2C-Bus via ELV USB-I2C

On 10/3/22 17:26, Axel Rau wrote: Questions: 1. On usbdump, why is the hexdump mssing on some lines like frame[0] WRITE bytes ? The -s arguments tells to only grab the first 1024 bytes. Maybe it is truncated. Try setting -s to 65536 --HPS

Re: Accessing I2C-Bus via ELV USB-I2C

On 10/3/22 17:50, Axel Rau wrote: 15:46:38.539679 usbus1.3 DONE-CTRL-EP=,SPD=FULL,NFR=1,SLEN=0,IVAL=0,ERR=0 frame[0] WRITE 8 bytes Hi, For USB control transfers frame[0] contains a copy of the SETUP packet. Maybe the total length exceeds the internal buffer, so that the USB contro

Re: Accessing I2C-Bus via ELV USB-I2C

On 10/4/22 01:35, Axel Rau wrote: Am 03.10.2022 um 17:57 schrieb Hans Petter Selasky : Can you show the full sequence from the SUBM-CTRL-EP ? - - - 15:46:38.538480 usbus1.3 SUBM-CTRL-EP=,SPD=FULL,NFR=1,SLEN=8,IVAL=0 frame[0] WRITE 8 bytes 41 07 01 01 00 00 00 00

Re: Accessing I2C-Bus via ELV USB-I2C

On 10/4/22 12:03, Axel Rau wrote: Am 04.10.2022 um 10:39 schrieb Hans Petter Selasky : That looks normal. The DONE transaction transferred the SETUP packet, but still lists frame [0], but is not dumping the data, because it has already been sent. frame [0] is always the SETUP packet for

Re: Accessing I2C-Bus via ELV USB-I2C

c59ecc6c361f48f08b70d4fed905667b62e21ed6 Mon Sep 17 00:00:00 2001 From: Hans Petter Selasky Date: Wed, 5 Oct 2022 16:45:21 +0200 Subject: [PATCH] uslcom(4): Clear stall at every open. To avoid data loss, make sure both the receive and transmit data toggles get reset, before trying to read or write any data

Re: Accessing I2C-Bus via ELV USB-I2C

On 10/5/22 18:31, Axel Rau wrote: Am 05.10.2022 um 16:46 schrieb Hans Petter Selasky : On 10/5/22 13:55, Axel Rau wrote: If I do not want to touch th USB stuff, can I get the same effect by close/open of the serial device? The uslcom driver only does this right after attach, in 13-stable