On Tue, 2002-12-10 at 03:16, Michael Nottebrock wrote:
I have /usr/ports/distfiles nfs-mounted from another machine, and when I
build a port, fetch runs as root and writes in /usr/ports/distfiles. The
files which are created this way carries an insanely huge uid (12
digits!) which causes
On Tue, 10 Dec 2002, Adrian Penisoara wrote:
What is the proper solution ? I'd rather prefer to modify the termcaps
than making adjustments in PuTTY, as some persons get cranky when it
comes about changing PuTTY settings while Linux works well with the
defaults.
proper way is to alter the
Hi,
On Tue, 10 Dec 2002, Marcel Stangenberger wrote:
On Tue, 10 Dec 2002, Adrian Penisoara wrote:
What is the proper solution ? I'd rather prefer to modify the termcaps
than making adjustments in PuTTY, as some persons get cranky when it
comes about changing PuTTY settings while Linux
Quoth Adrian Penisoara on Tue, Dec 10, 2002 at 13:17:17 +0200
But I have Bash as the default shell. And yes, it works changing the
Terminal / Keyboard / Backspace key from Contrl-? (127) to
Control-H, but the users are pissed off by the fact that Linux doesn't
need this -- does it mean
Hellol,
In this particular case, I was trying to build the webmin port, but the
problem als occurred before when trying to build the wget port. What I did
then was to edit the make file to build without Openssl, because in my
particualr case, i did not need openssl with wget, but Webmin is a
Hello, I see you posted this to the lists sometime back, but I saw no
reply to it. Incidentally I am experiencing *EXACTLY* the same problem, so
I was wondering if you had finally come up with a solution, seeing as you
did no followup post.
Your help will be very much appreciated,
Thanx
Lk.
On
On Tue, 10 Dec 2002, Adrian Penisoara wrote:
Hi,
On Tue, 10 Dec 2002, Marcel Stangenberger wrote:
On Tue, 10 Dec 2002, Adrian Penisoara wrote:
What is the proper solution ? I'd rather prefer to modify the termcaps
than making adjustments in PuTTY, as some persons get cranky when
Hi,
I am trying to install samba on my freeBSD machine and
it says /: write file system full .Looks like the
hard disk is not sufficient.How do I solve this
issue,meaning to uninstall a few things?
thanks
shubha
__
Do You Yahoo!?
Everything you'll
On Tue, 10 Dec 2002, [iso-8859-1] shubha mr wrote:
Hi,
I am trying to install samba on my freeBSD machine and
it says /: write file system full .Looks like the
hard disk is not sufficient.How do I solve this
issue,meaning to uninstall a few things?
depending on the packages you have
Hello,
I just wanted to ask or should I say request for a
favour. I need a sponsor to study Computer Engineering
in the US although I'm getting an athletic scholarship
but I also need someone else to assist me. I am
asking you but it's only a request please if you want
to help me just reply
Hy,
Perhaps you can also do a:
1) cd /usr/ports make clean make distclean
(this will take some time an clean up you /usr/ports/dist directory an
your /usr/ports directory)
You might not need to clean the entire /usr/ports directories perhaps
only /usr/ports/x11-wm/kde3 for example if you have
# [EMAIL PROTECTED] / 2002-12-10 11:59:53 +0200:
I'm getting pissed (me and some other professors) by the Backspace and
Delete keystrokes that are incorrectly handled by either PuTTY or
FreeBSD when connecting to a FreeBSD system from a Windows workstation
with PuTTY. No need to mention that
# [EMAIL PROTECTED] / 2002-12-09 15:22:20 -0200:
Well I have this problem with freebsd
I have this network.
Range: 10.10.10.192-207
Network: 10.10.10.192/28
Netmask: 10.10.10.254
Router: 10.10.10.193
I want to setupa firewall connecting it directly to the router using 2
ethernet
On Tue, 10 Dec 2002, local.freebsd.questions wrote:
Date: Tue, 10 Dec 2002 10:59:25 -
From: local.freebsd.questions [EMAIL PROTECTED]
To: '[EMAIL PROTECTED]' [EMAIL PROTECTED]
Subject: Re: grip cd ripper - which one
On Tue, 10 Dec 2002 00:31:01 -, [EMAIL PROTECTED] (John
Does anyone know about an instability in the 3c90x drivers from 3com on
freeBSD ?
_
MSN Messenger : discutez en direct avec vos amis !
http://www.msn.fr/msger/default.asp
To Unsubscribe: send mail to [EMAIL PROTECTED]
with
On Tue, Dec 10, 2002 at 10:59:25AM -, local.freebsd.questions wrote:
On Tue, 10 Dec 2002 00:31:01 -, [EMAIL PROTECTED] (John
Bleichert) wrote:
Whoops!! I never installed cdrtools, burncd has been working well.
Thanks for the pointer!
Surely it only works for SCSI CDs though?
If
Hello,
any experience with this notebook under freebsd?
It came preinstalled with windows xp and a free 2. primary partition.
Will freebsd boot, xfree work?
greetings
--
Fritz Heinrichmeyer mailto:[EMAIL PROTECTED]
FernUniversitaet Hagen, LG ES, 58084 Hagen (Germany)
tel:+49 2331/987-1166
I've been beating on freebsd diskless for awhile now and would love to
see some hard docs on it. My current goal is to get an iPaq IA1 stable
under FreeBSD diskless using nothing but a 32M CF card and a USB nic.
I'm oh so close but still dealing with random locks under load.
(BTW, booting off CF
putty on win to freebsd works ok for me, except for bitchx, so I just set
term=vt102 prior to firing up BitchX. My shell is tcsh.
Brian
- Original Message -
From: Adrian Penisoara [EMAIL PROTECTED]
To: Marcel Stangenberger [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Tuesday,
I added more memory and I made it past the ncurses failure, but now I get:
sh /usr/src/tools/install.sh -C -o root -g wheel -m 444 libcrypto_p.a
/usr/obj/usr/src/i386/usr/lib
sh /usr/src/tools/install.sh -s -o root -g wheel -m 444
libcrypto.so.2 /usr/obj/usr/src/i386/usr/lib
ln -fs
its only one of the top 2 deployed cards on the planet, i can't imagine
failure with this driver lasting very long.
Brian
- Original Message -
From: Christophe Simon [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, December 10, 2002 6:14 AM
Subject: 3c905B drivers
Does
At home I have a FreeBSD gateway working nicely for NAT and firewall.
One of the machines behind this firewall is an OS X iBook running
through a WEP-enabled Airport base station in bridged mode (i.e. it
only bridges the wireless and the ethernet). WEP has known problems,
and I'd like to
From: Fernando Gleiser [EMAIL PROTECTED]
To: Christophe Simon [EMAIL PROTECTED]
CC: [EMAIL PROTECTED]
Subject: Re: 3c905B drivers
Date: Tue, 10 Dec 2002 12:41:52 -0300 (ART)
On Tue, 10 Dec 2002, Christophe Simon wrote:
I have a problem of network instability. I use FreeBSD 4.7 as a
Theres good info on
http://www.samag.com/documents/s=7121/sam0205a/sam0205a.htm, including some
ipsec linkage at the bottom.
Brian
- Original Message -
From: Jeff Walters [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday, December 10, 2002 8:21 AM
Subject: IPsec on a NAT gateway
I try just ti identify a problem. And sorry, my interface is not a 3c905b,
but a 3x905-TX. Do you think it could change something ?
From: Brian [EMAIL PROTECTED]
To: Christophe Simon [EMAIL PROTECTED],
[EMAIL PROTECTED]
Subject: Re: 3c905B drivers
Date: Tue, 10 Dec 2002 08:17:44 -0800
its
Steve Bertrand wrote:
I added more memory and I made it past the ncurses failure, but now I
get:
sh /usr/src/tools/install.sh -C -o root -g wheel -m 444
libcrypto_p.a /usr/obj/usr/src/i386/usr/lib
sh /usr/src/tools/install.sh -s -o root -g wheel -m 444 libcrypto.so.2
On Tue, 10 Dec 2002, Jeff Walters wrote:
At home I have a FreeBSD gateway working nicely for NAT and firewall.
One of the machines behind this firewall is an OS X iBook running
through a WEP-enabled Airport base station in bridged mode (i.e. it
only bridges the wireless and the ethernet).
Hi,
I have had two instance's when using the 3com card that the bsd box
reboot's, when transferring alot of data to it. I have also had machine's
complete lockup. I now use Realtek 8029/8139 and not a single problem.
Doron Shmaryahu
- Original Message -
From: Christophe Simon [EMAIL
On Tue, 10 Dec 2002 09:26:21 -0500 (EST), Jerry McAllister
[EMAIL PROTECTED] said:
Hello!
When I start my system I have a choise of 2 OS's:
F1: ???
F3: FreeBSD
The question is how do i change ??? to Win2000?
This is a frequent question, so there is a lot in the
# [EMAIL PROTECTED] / 2002-12-10 12:10:12 -0500:
On Tue, 10 Dec 2002, John Bleichert wrote:
From: John Bleichert [EMAIL PROTECTED]
...
I'm getting an error when running 'make installworld' which I
haven't seen before (I normally do this in single user mode, I
jumped into mulit-user
Quick and simple, I guess ... can someone tell me where to find what those
codes mean? User unknown? Password failed? Could not connect to server?
I've tried to search Google, and am drawing a blank so far :( The NCP
stuff is pretty much my last step to getting this laptop in place to
On Tue, 10 Dec 2002, Roman Neuhauser wrote:
# [EMAIL PROTECTED] / 2002-12-10 12:10:12 -0500:
On Tue, 10 Dec 2002, John Bleichert wrote:
From: John Bleichert [EMAIL PROTECTED]
...
I'm getting an error when running 'make installworld' which I
haven't seen before (I normally do
Same here,
only solution was switching to fxp ( intel )
box used to reboot any time i'd start rsyncing .
- Original Message -
From: Doron Shmaryahu [EMAIL PROTECTED]
To: Christophe Simon [EMAIL PROTECTED]
Cc: FreeBSD-questions [EMAIL PROTECTED]
Sent: Tuesday, December 10, 2002 12:32 PM
On 9 Dec 2002, Lowell Gilbert wrote:
Subject: Re: INDEX file layout
John Bleichert [EMAIL PROTECTED] writes:
On Mon, 9 Dec 2002, John Bleichert wrote:
Date: Mon, 9 Dec 2002 12:20:26 -0500 (EST)
From: John Bleichert [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: INDEX file
Hi,
I have a problem well more of a question. I am in a situation where I have a
Freebsd box as primary MX for mydomain.com I want it to scan the mail then
pass it onto another machine. I know I can use a mailertable with this but
is there any way I could use dns which would make it simpler as
On 2002-12-10 10:12, Hansel Yapadi [EMAIL PROTECTED] wrote:
How to verify the FreeBsd`s CDs?
Now, I`m using Redhat Linux, and It`s easy to check the cds by typing
linux mediacheck
In my opinion, any method that adds self checking stuff to programs
is worthless its bytes, not to mention that
On Tuesday 10 December 2002 6:40 pm, Bo Xiao wrote:
Hi,
Running 5.0-RC. Hit the same problem since 5.0-DP2.
Anyone else seeing it?
Bo Xiao
I would head over to http://fruitsalad.org.. i believe the last successful
build on -current was 3.0.3-1. A mail to [EMAIL PROTECTED] may get you more
Hello all.
Does anybody know how can I figure out what status=51 error=04 mean?
dmesg reported that regarding an (obviously) bad disk (due to power outage).
I didn't find anywhere in the Net a look-up table or something similar that
which possibly could give me a *precise*
I'm trying to get VMWare setup on a machine running FBSD 4.7. I got the
port installed and can run VMWare and the config wizard etc... however
it does not see my cdrom. I verified it is mounted, but there is
nothing in /compat/linux/dev that points to /dev/acd0c or the mountpoint
/cdrom,
Is there a simple visitor counter that is in the ports?
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
I know this is off topic but this list does seem to have the most
knowledgeable people
for this kind of question.
I have a 4.7 FBSD with samba running, so I get a lot of files with unkosher
names ie.
spaces in the name. So what I tried doing was to write a shell script using
sh that
located
Hi,
Lately I get sometimes the following kernel messages:
linux: syscall gethostname is obsoleted or not implemented (pid=x)
Does anyone know what this means and what ot do to get rid of them?
Thanks,
Marco
--
I'm a creationist; I refuse to believe that I could have evolved from
man.
On Tue, 10 Dec 2002, Roman Neuhauser wrote:
# [EMAIL PROTECTED] / 2002-12-09 15:22:20 -0200:
Well I have this problem with freebsd
I have this network.
Range: 10.10.10.192-207
Network: 10.10.10.192/28
Netmask: 10.10.10.254
Router: 10.10.10.193
That's not the correct netmask
Probably in the netware headers.
--On Tuesday, December 10, 2002 14:07:16 -0400 Marc G. Fournier
[EMAIL PROTECTED] wrote:
Quick and simple, I guess ... can someone tell me where to find what those
codes mean? User unknown? Password failed? Could not connect to server?
I've tried to
On Tue, 10 Dec 2002, Larry Rosenman wrote:
Probably in the netware headers.
Pick an error, any error :(
#define BAD_PRINTER_ERROR 0x89FF /* 255 */
#define BAD_RECORD_OFFSET 0x89FF /* 255 */
#define CLOSE_FCB_ERROR 0x89FF /* 255 */
#define
During boot, a number of devices are recognized. Does this mean I do not
necessarily need drivers for them? What is the connection there? My
webcam is a Creative Webcam II parallel and my scanner is a Canon CanoScan
N650U USB flatbed but to date I've been unable to get either to work on
[EMAIL PROTECTED]
my fairly new 40gb ibm drive is ill.
i had just bought a 40 gb maxtor [ad1] to back
it up,
when tues night i got the message-pls see
below--
any suggestions
Akifyev Sergey wrote:
[... ripped by viruses ...]
In the absence of -maproot and -mapall options, remote accesses by root
will result in using a credential of -2:-2. All other users will be
mapped to their remote credential.
[... ripped by viruses ...]
so, here's your answer! -2 would be
# [EMAIL PROTECTED] / 2002-12-10 20:28:06 +0200:
On 2002-12-10 10:12, Hansel Yapadi [EMAIL PROTECTED] wrote:
Is it possible to install all packages that available in the 1-4 cds
?
yes.
How to install all packages in one click ( I don`t need to select
the packages one by one ) ?
On Tue, 10 Dec 2002, Matthew D. Fuller wrote:
On Mon, Dec 09, 2002 at 08:44:29PM -0800 I heard the voice of
Oliver Crow, and lo! it spake thus:
Of course this doesn't work because pax just creates the file
'dump.0.2002-10-10'.
Is there some way to move a dump file to a set of
On Tue, Dec 10, 2002 at 01:17:17PM +0200, Adrian Penisoara wrote:
[...]
But I have Bash as the default shell. And yes, it works changing the
Terminal / Keyboard / Backspace key from Contrl-? (127) to
Control-H, but the users are pissed off by the fact that Linux doesn't
need this -- does it
Am Dienstag den, 10. Dezember 2002, um 20:46, schrieb Jonathan Chen:
On Tue, Dec 10, 2002 at 01:17:17PM +0200, Adrian Penisoara wrote:
[...]
But I have Bash as the default shell. And yes, it works changing the
Terminal / Keyboard / Backspace key from Contrl-? (127) to
Control-H, but the
On Tue, Dec 10, 2002 at 12:47:22PM -0500, Jud wrote:
On Tue, 10 Dec 2002 09:26:21 -0500 (EST), Jerry McAllister
[EMAIL PROTECTED] said:
Hello!
When I start my system I have a choise of 2 OS's:
F1: ???
F3: FreeBSD
The question is how do i change ??? to
Hello,
I've successfully installed FreeBSD 4.7-stable (now customized to run
the sound card) on my Toshiba Satellite notebook; the video (1024x768,
16bit) is running ok, there was a problem with the keyboard (ssomme
keyys wass haavving this behhavioor), and solved. I'm listing the
X86Config
On Dec 10 you wrote:
This is a result of using cons25 as the terminal type, on machines
that don't have a proper termcap/terminfo entry for FreeBSD consoles
(all linux machines, for instance).
Is there no way to get this linux-termcap/terminfo compatible?
I work around this by running screen
On Tue, Dec 10, 2002 at 11:16:07AM -0500, Steve Bertrand wrote:
I added more memory and I made it past the ncurses failure, but now I get:
sh /usr/src/tools/install.sh -C -o root -g wheel -m 444 libcrypto_p.a
/usr/obj/usr/src/i386/usr/lib
sh /usr/src/tools/install.sh -s -o root -g wheel
On 2002-12-10 09:08, Dan Malaby [EMAIL PROTECTED] wrote:
I have a 4.7 FBSD with samba running, so I get a lot of files with
unkosher names ie. spaces in the name. So what I tried doing was to
write a shell script using sh that located these files and changed the
space to a underbar.
I know
On Tue, Dec 10, 2002 at 05:45:47PM -0600, Joey Mingrone wrote:
snip
So my questions... Should I trust WD diagnostics? Why would fsck all of a
sudden fix the problem? ..if it did fix it? Has anyone else with the
same/similar hardware experienced these problems.
Oddly enough I was having
I'm running with the Linksys USB100TX, booting off a 32MB CF card, all
filesystems and swap are done over nfs. The linksys works good, no errors,
other than the random locks under load. (Running NetBSD 1.6 or FreeBSD
5DP2)
I'll try to get 4.7 running tonight to see if that fares better
Joshua
On Tue, 10 Dec 2002, Marc G. Fournier wrote:
Quick and simple, I guess ... can someone tell me where to find what those
codes mean? User unknown? Password failed? Could not connect to server?
I don't know the specific meaning of the error, but on my system today I
think it meant I needed to
I've teleneted into my freeBSD server from a windows 2000 machine. But I
can't seem to do it from Windows NT web server.
Are there any limitations with windows NT. The port is opened and I've
tested my server at home and it works from a Unix box to a Unix box.
To Unsubscribe: send mail to
In the last episode (Dec 10), [EMAIL PROTECTED] said:
All,
I cannot seem for the life of me, to get a server removed from the
DSBL (dsbl.org) open relay list. Here's the short and skinny:
DSBL will sends an email to abuse or postmaster @ the ip address of
the server listed. The current
Hi group, I just installed FreeBSD for the first time tonight, and so far,
everything is going quite well. My only complaint is that X isn't behaving
very nicely.
I'm running x as 'startx -- -depth 24'
The highest resolution setup in my XF86Config is 1280x1024, my preferred
resolution.
On Wed, 2002-12-11 at 12:32, Tyler Eaves wrote:
Section Screen
Identifier Screen0
Device Card0
MonitorMonitor0
Option NvAGP 3
Try adding this line in the Screen section and just running #startx
without the depth option.
Section Screen
Identifier
Hi all,
Here is a true mystery for you. Please help if you can
I have received no response at earlier times thanks...
I have an ADSL gateway ( pppoe via userppp so tun0
uses my de0 NIC)
I config my kernel to do IPFilter stuff as per
schlacters tute.
I put no matter what rule in and it will no
Recipient of the infected attachment: icsnetbroadcaster\Inbox
Subject of the message: A funny game
One or more attachments were quarantined.
Attachment install.exe was Quarantined for the following reasons:
Virus W32.Klez.H@mm was found.
application/ms-tnef
I got this error installing both netscape48-navigator and
netscape48-communicator. Does anyone know what the catch is?
=== linux-netscape-communicator-4.8 depends on file:
/compat/linux/etc/redhat-release - found
/bin/mkdir -p /usr/local/lib/netscape-linux/java/classes
for i in
/usr/include/sys/syslimits.h:41:2: warning: #warning No
user-serviceable parts inside.
I keep getting this damned warning. In particular apache (apr [HEAD])
but I seem to remember other things doing it too.
OS is FreeBSD-5.0RC1
p6m7g8# gcc -v
Using built-in specs.
Configured with:
David Banning wrote:
I got this error installing both netscape48-navigator and
netscape48-communicator. Does anyone know what the catch is?
[snip]
*** Signal 12
Stop in /usr/ports/www/netscape48-communicator.
su-2.03#
[/home/paul]:: grep 12 /usr/include/sys/signal.h
#define _SIG_MAXSIG
On 2002-12-10 20:39, Roman Neuhauser [EMAIL PROTECTED] wrote:
# [EMAIL PROTECTED] / 2002-12-10 20:28:06 +0200:
On 2002-12-10 10:12, Hansel Yapadi [EMAIL PROTECTED] wrote:
Is it possible to install all packages that available in the 1-4 cds?
How to install all packages in one click ( I
Hi, everybody.
When I try to mount cd-rom with
mount -t cd9660 /dev/cd0c /mnt
I'm always getting device is busy, but cdrom is being
mounted anyway.
Does anyone know what causes this device is busy error?
I'm using FreeBSD 4.6. Samsung 40x (SF-140) cdrom.
thanx.
To Unsubscribe: send mail to [EMAIL
On Wed, 11 Dec 2002 10:52:40 +1100
JacobRhoden [EMAIL PROTECTED](by way of JacobRhoden [EMAIL PROTECTED]) wrote:
On Wed, 11 Dec 2002 06:46, Jonathan Chen wrote:
It's Linux that's stepping on standards. Their default config is to
have erase=DEL. All other UNIX boxen I've used have
Are you in the mount directory (/cdrom, or /mnt) at the time?
If so, just cd .. and it should be fine.
HTH,
Andrew
***
This email is confidential and may well also be legally privileged.
If you have received this email
73 matches
Mail list logo