On Wed, Apr 20, 2005 at 10:00:12PM -0400, jason henson wrote:
Gary Kline wrote:
What post-installation stuff do I have to do to get
mplayer-plugin to work with mozilla / firefox?
(Also, is there a way of getting this windows-player-clone
to work with links?)
Here
On Thu, Apr 21, 2005 at 03:28:40PM +1000, Warren wrote:
im running FreeBSD 5.4 and have /var as well as all the other filesystems not
clean and when going to single user mode mounting all and running fsck -y ...
it refuses to slvage anything and is causing multiple hassles with my
computers
Hello.
Before sending a PR, I would like to ask about the state of burncd. It
is not working properly for me.
My hardware is a AMD64 based system with A NEC ND 3500AG/2.19 and a DELL
Optiplex 280/i386
with a HP 1100 (both drives DVD+-RW).
Burning DVD+RW is ok on formated media. Formatting
I use FreeBSD 4.11-RELEASE. In my rc.conf I have these
lines:
firewall_enable=YES
firewall_logging=YES
firewall_script=/root/ipfw.sh. In /root/ipfw.sh I
have added a few more lines for ifconfig(setting
IP,MAC). The problem is that, when I try to use a
different MAC and IP, the apache starting
On Wed, Apr 20, 2005 at 04:11:28AM +0200, Eskandar S.Sadek wrote:
Dear Sir ,
I would like to ask about what is the requirement to be freebsd mirror
site FTP mirror
I hope you can supply me with detail information about this
Thank you for your time
I think there's an article that explains
koen de wijs [EMAIL PROTECTED] writes:
I want to try out Linux. I heard it is more user friendly and the basic
stuff will be set up during installation.
The definition of user friendly is hardly set in stone. I for one do
not equate Microsoft style demoability with user frienliness, at least
Hi,
Someone consulted me about building a pc router for
multiple networks using a single interface card.
Actually there are two, one facing a network going to
the internet, and the other facing those multiple
networks.
The setup looks like this.
There are three /24 networks, A, B, C
All of
hi ,
i tried building the freebsd 5.3 kernel and it works
fine, but can u people give me some tips regarding
optimizing kernel during build, even saving a single
cpu cycle would mean a lot. i would like to have a
kernel that is really optimized. And what do you
people do to fine tune
Hello.
I have to write this command on my server after every reboot to allow
my workstation to access the Internet through it:
# pfctl -F a ; pfctl -Nf /etc/pf.conf ; pfctl -sr
My pf.conf looks like this:
int_if=ep0
ext_if=lnc0
# *** Options
#
set block-policy drop
# *** Scrub incoming
Mark Jayson Alvarez wrote:
The setup looks like this.
There are three /24 networks, A, B, C
All of these networks are private lan. However,
Network A contains their servers, one of which is
their internet proxy server. That proxy server is dual
homed, one private, one public, which is also their
On Apr 20, 2005, at 3:55 PM, [EMAIL PROTECTED] wrote:
koen de wijs wrote:
Hello folks,
I'm new to unix. This year I tried FreeBSD. Some friend of
mine adviced
FreeBSD. I think it works great. Only one thing that I
don't like is
that you will need to know a lot to setup a lot of basic stuff.
Yeah,
darren david wrote:
Hi all-
So having sold my Mac (boo!) and being stuck with FreeBSD (yay!), I'm
looking for a server-based address book replacement. LDAP seems like the
way to go, but i have yet to find a good HOWTO and/or GUI based
application for administering said contact
On Apr 21, 2005, at 7:48 AM, Ted Mittelstaedt wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Bart
Silverstrim
Sent: Thursday, April 21, 2005 4:33 AM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: FreeBSD vs Linux
I'm afraid after playing
Fafa Diliha Romanova [EMAIL PROTECTED] writes:
I have to write this command on my server after every reboot to allow
my workstation to access the Internet through it:
Ok, so the server here is the gateway.
# pfctl -F a ; pfctl -Nf /etc/pf.conf ; pfctl -sr
and you essentially turn off
Hi,
I think FreeBSD is the easiest decent operating system that i have ever
used(i have used windows and linux distros too). To install a webserver
under freebsd u dont have to run here and there, just go to ports and make
install clean. You dont need a bunch of buttons for that. And freebsd's
Here it is, I got them when I buildworld, there must be something wrong, and my
sound card does not work any more. so please just look at them and give me
some advise.
%dmesg | more
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60
Zhang Chris-czhang01 wrote:
Here it is, I got them when I buildworld, there must be something wrong, and my sound card does not work any more. so please just look at them and give me some advise.
%dmesg | more
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting
Sorry guys, the thing really confused me is that I always received this:
stray irq7
stray irq7
stray irq7
stray irq7
too many stray irq 7's: not logging anymore
what the hell is this?
last time the dmesg out put which I posted does not include this, but If I run
the server for
that is normal for dial up modems. In the FAQ there is directions
to make source changes to stop these unwanted messages.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Zhang
Chris-czhang01
Sent: Thursday, April 21, 2005 9:10 AM
To:
On Thu, Apr 21, 2005 at 02:17:31AM -0700, Mark Jayson Alvarez wrote:
What's even funny about this is that he brought that
pc he will turn into a router in our office so that we
can install freebsd-4.11 with this specs:
pentium III - 500 Mhz
memory 64 MB.
HD 4 GB
IIRC when
Hello,
One of my clients want a high performance computer with a high level of
redundancy.
I was thinking of two solutions :
###
1. Installing 2 high perf computers :
###
This will involve buying 2 servers with the same level of disks,
hardware RAID
Hello,
I've got a 5.3-RELEASE box which has a /usr partition /dev/ad0s1e that
is to small by approximately 700 mb. I've got the space on /var /dev/ad0s1d
to do a resize, but i am unsure as to the procedure. I tried this once a
while back on a test box and lost everything. If anyone has
hi,
when i try to install freebsd 5.3 im getting
the following error message in disk label editor
unable to make device node for /dev/ad0s2a in /dev
the creation of filesystems will be aborted.
help me to join you.
regrds,
ananth.g
___
Hi all!
I've installed snort and it's up and running. I've also installed
snortsnarf to get HTML output... But I do not know how to get snort to
output in a format that snortsnarf can read. So, anyone that has got this
working? What did you put in snort.conf to create a for snortsnarf
readable
On Thu, 21 Apr 2005, Jerry McAllister wrote:
Hello,
I've got a 5.3-RELEASE box which has a /usr partition /dev/ad0s1e that
is to small by approximately 700 mb. I've got the space on /var /dev/ad0s1d
to do a resize, but i am unsure as to the procedure. I tried this once a
while back on a test
On Thu, 21 Apr 2005, Jerry McAllister wrote:
Hello,
I've got a 5.3-RELEASE box which has a /usr partition /dev/ad0s1e that
is to small by approximately 700 mb. I've got the space on /var /dev/ad0s1d
to do a resize, but i am unsure as to the procedure. I tried this once a
Hello all,
Does anybody know of a solution for this problem:
I have just acquired a new Zire 31 Palm Pilot to replace my old Palm
VII, which was a serial interface.
I figured out how to sync the Zire to jpilot over USB after compiling
the kernel (5.3 p9) with 'device ucom' and 'device uvisor'.
On Thursday 21 April 2005 11:20 am, Duane Winner wrote:
Hello all,
Does anybody know of a solution for this problem:
I have just acquired a new Zire 31 Palm Pilot to replace my old
Palm VII, which was a serial interface.
I figured out how to sync the Zire to jpilot over USB after
BSD wrote:
Hello,
One of my clients want a high performance computer with a high level of
redundancy.
One big question to start with:
what kind of servers?
Or, what kind of services will they need to provide?
bye
av.
___
Hi all,
I was just wondering if there's a solution to fix the WRITE_DMA problem. I've
searched the archives but couldn't find a complete answer to this,
like why it's happening and what to do about it. I'd appreciate any help.
It seems that this doesn't do any harm to my system, but I'm not sure
On Thu, 2005-04-21 at 14:48, BSD wrote:
Hello,
One of my clients want a high performance computer with a high level of
redundancy.
I was thinking of two solutions :
###
1. Installing 2 high perf computers :
###
This will involve buying 2
Hi all,
I've been looking into using the pam_radius pam module and have
been trying out the template_user feature as this would ease the
administrative burden in our setup, (it allows a user to be specified as
a template if the radius user does not have a local account.) I can get it
to work
Le 21 avr. 05, à 19:36, Andrea Venturoli a écrit :
BSD wrote:
Hello,
One of my clients want a high performance computer with a high level
of redundancy.
One big question to start with:
what kind of servers?
Or, what kind of services will they need to provide?
bye
av.
- DNS (BIND)
- Mail
On Apr 20 06:54PM, Michael Collette wrote:
Before getting into the CDRW stuff, why K3B wouldn't run. I would bet
that you're using an X Display Manager, like kdm, gdm, or even xdm.
You can't just su into root and run stuff like that. You need to
fully log out, then log into whatever wm you
Hi,
I've just gotten my hands on a server with a LSI 1020 controller.
Unfortunately when I try to boot the server off my 5.3 CD I get an error
message stating that mpt0: bullet missed in timeout.
I'm unable to find the 1020 in the hardware compability list for 5.x but
the 1030 is there. Also
G'Day, all.
Please forgive all the question. I am new to FreeBSD and for the past
few weeks I have been trying to get my Dell D600 to dual boot XP Pro
and FreeBSD 5.3. I have almost got it with the exception of a few
remaining items. I already have a question out there for the
Evolution
I repeated the setup attempt on another machine with different hardware
and got stuck with the same problem. Does anybody have a idea regarding
the obvious that I could be missing in order to get these systems to
boot? Otherwise I'll get someone to sit in front of the machine and
look at the
Is it possible to built a Shell script that be able to control the
Mathematica, opening, calculating any functions and closing it ? If
yes. How can I do this?
Ednilsom
___
freebsd-questions@freebsd.org mailing list
From time to time, my torrent filesharing application will crash or need
to be killed. The application is configured to listen on a specific port.
If I try to restart the application after improper termination, I receive
a fatal error message stating that the port is already in use.
Before
Hello! I'm a programmer from Russia. Where can I find documentation
about LKM drivers or about next thing: I need to write driver of special
device attached to com-port. I don't know how can I work with com-port
(using termios.h or assembler?), because I don't know what is correct
for kernel
--On Wednesday, April 20, 2005 07:20:24 PM -0600 Brett Glass
[EMAIL PROTECTED] wrote:
I consult with, and provide service to, quite a few sysadmins
at small companies. Most of them won't bother to fix a FreeBSD
system that's gone awry like that; they'll just reinstall. They
do not have the time
From time to time, my torrent filesharing application will crash or need
to be killed. The application is configured to listen on a specific port. If
I try to restart the application after improper termination, I receive a
fatal error message stating that the port is already in use.
Before
arax writes:
I was just wondering if there's a solution to fix the WRITE_DMA problem. I've
searched the archives but couldn't find a complete answer to this,
like why it's happening and what to do about it. I'd appreciate any help.
I had the same problem (same logical device, in fact, and
On 4/20/05, linuxbaby [EMAIL PROTECTED] wrote:
On Wed, 2005-04-20 at 11:40 -0400, Alexander Chamandy wrote:
I was curious if anyone had got their iPod 40GB working on FreeBSD
5.4-STABLE/amd64? I've tried it under ehci(4) and it isn't properly
detected. Sometimes it will even lock the
I am working on setting up what will end up being a fully automated
environment for setting up our FreeBSD systems. As part of the setup
process when they are racked they get plugged into a serial console
(Cyclades) and I have console=comconsole in the loader.conf that I'm
using in the PXE
I have a few servers, and I'd like to force secondary servers to
deliver mail to the primary via a private network (each server is
dual-homed). Mail would be deemed local (destined for my LAN) by
specifying a bunch of CIDRs. I would like to accomplish this using
ipfw's forwarding support, but I am
From time to time, my torrent filesharing application will crash or need
to be killed. The application is configured to listen on a specific port.
If I try to restart the application after improper termination, I receive a
fatal error message stating that the port is already in use.
Before
I use 4.11R of FreeBSD. In my rc.conf file I have
these lines:
firewall_enable=YES
firewall_logging=YES
firewall_script=/root/ipfw.sh
In /root/ipfw.sh there are ipfw commands, and,
commands for configuring the IP and MAC. When changing
an entry (an IP and a MAC) with other one I experience
this
On 4/20/05, Andrew Heyn [EMAIL PROTECTED] wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Alexander
Chamandy
Sent: Wednesday, April 20, 2005 10:37 AM
To: freebsd-stable@freebsd.org; freebsd-questions@freebsd.org
Subject: Error:
Justin R. Pessa wrote:
On Apr 20 06:54PM, Michael Collette wrote:
Before getting into the CDRW stuff, why K3B wouldn't run. I would bet
that you're using an X Display Manager, like kdm, gdm, or even xdm.
You can't just su into root and run stuff like that. You need to
fully log out, then log
I've got 2 identical boxes (Supermicro sys-6023P-8R) running with ZCR
adaptec cards with 6 73Gig seagate scsi drives, 4 Gigs of ram, and dual
2.4 Ghz Xeons. Both of these machines are running 5.3-Release-p8. The
usually run for a day, give or take, and then they crash. The just
deadlock, no
On Apr 21, 2005, at 4:22 PM, Chris McGee wrote:
I've got 2 identical boxes (Supermicro sys-6023P-8R) running with ZCR
adaptec cards with 6 73Gig seagate scsi drives, 4 Gigs of ram, and
dual 2.4 Ghz Xeons. Both of these machines are running
5.3-Release-p8. The usually run for a day, give or
Seems like the suggestions below worked like a charm! I'm burning a CD
as we speak, thanks a lot!
On Apr 20 05 06:54PM, Michael Collette wrote:
Before getting into the CDRW stuff, why K3B wouldn't run. I would bet
that you're using an X Display Manager, like kdm, gdm, or even xdm.
You can't
fOLKS,
Just a suggestion that the mplayer-plugin port be
a) either configured to work straight away[1] or b) that
the Makefile inform the user that the mplayerplug-in.conf
in not in /usr/local/etc but /usr/X11R6/etc and that it
needs to be tweaked
What build option(s) are required to get the latest openoffice-2.0-
devel to build? The build fails when doing a portupgrade so I don't
see the actual cause of the failed build.
I know it's marked as broken, but that others have successfully
installed it. I've read where it says
rtld depends
On 4/21/05, paul beard [EMAIL PROTECTED] wrote:
If anyone has some suggestions (I realize he asked for Linux expertise,
but perhaps he's open to a different kind of switch), maybe leave him a
comment on his blog?
You may want to ask the [EMAIL PROTECTED] list for help on this.
I've cc'd it.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello All,
I updated linux-opera via the port yesterday (from 7.54 to 8.). Now it
generally takes five minutes to open, but once it does, nothing is out of the
ordinary. I am running the latest 4.x-Stable. Any ideas on what is causing it
to not
hi folks. this may seem uber-simple to some of you, but i'm ignorant
regarding this. your help is appreciated.
so, i have this album from Mötley Crüe (that looks right in vim, my
editor for mutt), and i have ripped it to FLAC and put it on my file
server. on the server, however, the directory
On Thu, Apr 21, 2005 at 04:03:37PM -0700, Joshua Lewis wrote:
I have a working FreeBSD system that I love and...(Wow saying out loud I
think I may need to seek a professional). Any way I would hate to loose it
and was wondering if there is a way to make a duplicate system without
weeks of
On Thu, Apr 21, 2005 at 06:22:12PM -0400, Chris McGee wrote:
I've got 2 identical boxes (Supermicro sys-6023P-8R) running with ZCR
adaptec cards with 6 73Gig seagate scsi drives, 4 Gigs of ram, and dual
2.4 Ghz Xeons. Both of these machines are running 5.3-Release-p8. The
usually run for
OK, let it be clear that the cdrdao thing is a problem of the software itself
(as in: not needed to be root if done right), but certainly for us with devfs
and proper permissions and group membership this can be solved without any
problems or upstream changes. I can burn CDs alright but the GUI
Chad Leigh -- Shire.Net LLC wrote:
On Apr 21, 2005, at 4:22 PM, Chris McGee wrote:
I've got 2 identical boxes (Supermicro sys-6023P-8R) running with ZCR
adaptec cards with 6 73Gig seagate scsi drives, 4 Gigs of ram, and
dual 2.4 Ghz Xeons. Both of these machines are running
5.3-Release-p8.
On Apr 21, 2005, at 7:42 PM, Christopher McGee wrote:
Chad Leigh -- Shire.Net LLC wrote:
On Apr 21, 2005, at 4:22 PM, Chris McGee wrote:
I've got 2 identical boxes (Supermicro sys-6023P-8R) running with
ZCR adaptec cards with 6 73Gig seagate scsi drives, 4 Gigs of ram,
and dual 2.4 Ghz Xeons.
On Friday, 22. April 2005 03:35, Danny Pansters wrote:
OK, let it be clear that the cdrdao thing is a problem of the software
itself (as in: not needed to be root if done right), but certainly for us
with devfs and proper permissions and group membership this can be solved
without any problems
On Apr 21 05 06:22PM, Chris McGee wrote:
I've got 2 identical boxes (Supermicro sys-6023P-8R) running with ZCR
adaptec cards with 6 73Gig seagate scsi drives, 4 Gigs of ram, and dual
2.4 Ghz Xeons. Both of these machines are running 5.3-Release-p8. The
usually run for a day, give or take,
Hi. Thanks for the suggestion:
It looks like your module versions are out of date. Try to recompile
apache and all your php extensions.
I tried to accomplish this by doing:
cd /usr/ports/lang/php5
make deinstall
cd /usr/ports/lang/php5-extensions
make deinstall
cd /usr/ports/www/apache2
make
I've been cvsup'ing the kernel regularly (standard-supfile) for
quite a while. About maybe a month or so ago, when trying to do a
kernel build, I get what appear to be make errors with the error
message Unassociated shell command.
(A copy of the pertinent lines from the build log are below).
[EMAIL PROTECTED] wrote:
I've been cvsup'ing the kernel regularly (standard-supfile) for
quite a while. About maybe a month or so ago, when trying to do a
kernel build, I get what appear to be make errors with the error
message Unassociated shell command.
(A copy of the pertinent lines from the
hi,
Is it normal for OpenOffice-1.1.2 to take a very long compilation
time? I installed using the ports. I actually have consumed almost 24
hours to compile openoffice in FreeBSD-5.3 and until now it is still
compiling. I also tried installing the source but when I execute
seetup, it jst shows
Edwin D. Vinas writes:
Is it normal for OpenOffice-1.1.2 to take a very long compilation
time? I installed using the ports. I actually have consumed
almost 24 hours to compile openoffice in FreeBSD-5.3 and until
now it is still compiling.
Yes. OpenOffice is possibly the largest
On Thursday 21 April 2005 10:59 pm, you wrote:
Hi. Thanks for the suggestion:
It looks like your module versions are out of date. Try to
recompile apache and all your php extensions.
I tried to accomplish this by doing:
cd /usr/ports/lang/php5
make deinstall
cd
On Fri, 2005-04-22 at 12:42 +0800, Edwin D. Vinas wrote:
hi,
Is it normal for OpenOffice-1.1.2 to take a very long compilation
time? I installed using the ports. I actually have consumed almost 24
hours to compile openoffice in FreeBSD-5.3 and until now it is still
compiling. I also tried
On Fri, Apr 22, 2005 at 12:42:10PM +0800, Edwin D. Vinas wrote:
hi,
Is it normal for OpenOffice-1.1.2 to take a very long compilation
time? I installed using the ports. I actually have consumed almost 24
hours to compile openoffice in FreeBSD-5.3 and until now it is still
compiling. I also
[EMAIL PROTECTED] wrote:
(B On Wed, 20 Apr 2005 17:10:04 -0600
(B Brett Glass [EMAIL PROTECTED] wrote
(B
(B
(B What you are asking for is something you can (sort of) get most of the
(B time from Apple or RedHat. If it's that important for you to be able
(B to keep your hands out of the
Gary Kline wrote:
On Wed, Apr 20, 2005 at 10:00:12PM -0400, jason henson wrote:
Gary Kline wrote:
What post-installation stuff do I have to do to get
mplayer-plugin to work with mozilla / firefox?
(Also, is there a way of getting this windows-player-clone
to
75 matches
Mail list logo
