I'm trying to walk through the tutorial of Boost.Python
(the devel/boost-python port)... and unless I'm running
out of coffe right now, it seems as if the boost port
is not fully installed/specified!
Isn't boost supposed to come with a tools/build/v2
directory? Where is it?
Unless you
On December 14, 2007 at 11:25PM Ted Mittelstaedt wrote:
[ snip ]
It is dangerous to put any webmail application on a mailserver
for a couple reasons. First it is possible for users of the
app (assuming the app has the ability to save mail) to overflow
directories on the mailserver.
On December 14, 2007 at 08:03PM Frank Shute wrote:
On Fri, Dec 14, 2007 at 06:00:14PM -0500, Gerard Seibert wrote:
On December 14, 2007 at 04:10PM Frank Shute wrote:
[ snip ]
I'm happy with sh as the system shell though; it's light weight:
$ ls -l /bin/sh
-r-xr-xr-x 1
Since one of my discs is filling up rather quickly (Say disc A ) while
an other one stays quite empty (say disc B ) I would like to distribute
the content of a directory on disc A over both A and B. I know I can
simply move some of the files over to a sperate directory on disc B but
is is
Shakespeare wrote plays and sonnets which will last
an eternity, but on Fri, Dec 14, 2007 at 22:33 ,
[EMAIL PROTECTED] wrote these truly forgetable
lines:
Date: Fri, 14 Dec 2007 21:10:08 +
From: Frank Shute [EMAIL PROTECTED]
Subject: Re: Apparently, csh programming is considered harmful.
On Sat, Dec 15, 2007 at 04:13:49AM +0200, Giorgos Keramidas wrote:
On 2007-12-14 21:10, Frank Shute [EMAIL PROTECTED] wrote:
I used bash for an interactive shell for about 5 years until I
discovered the goodness of pdksh. About half the size, statically
linked, not full of bugs and better
On Sat, Dec 15, 2007 at 10:27:30AM +0100, Emanuel Haupt wrote:
I'm trying to walk through the tutorial of Boost.Python
(the devel/boost-python port)... and unless I'm running
out of coffe right now, it seems as if the boost port
is not fully installed/specified!
Isn't boost supposed
On Sat, Dec 15, 2007 at 06:57:09AM -0500, Gerard Seibert wrote:
On December 14, 2007 at 08:03PM Frank Shute wrote:
On Fri, Dec 14, 2007 at 06:00:14PM -0500, Gerard Seibert wrote:
On December 14, 2007 at 04:10PM Frank Shute wrote:
[ snip ]
I'm happy with sh as the
At Fri, 14 Dec 2007 14:02:42 -0800,
Rudy wrote:
Watanabe Kazuhiro wrote:
At Thu, 13 Dec 2007 12:16:45 -0800,
Rudy wrote:
Watanabe Kazuhiro wrote:
Hi.
At Tue, 11 Dec 2007 22:16:58 -0800,
Rudy wrote:
After reading some more man pages, I am still stumped but can better
phrase my
Frank Staals [EMAIL PROTECTED] writes:
Hi,
And off-course if this is possible how can I acchieve something like
that
Take a look at the handbook, sections regarding GEOM (stripe) or VINUM.
If you plan to use 7.0 or later, zfs can help too.
--
B Le jour où un bidet comprendra un tabouret,
Hi Ryan,
I presume you do something like :
make -jX KERNCONF=newkernel kernel
where X is a number larger than 2 ??
Run it without the j flag and then other errors will show up.
These errors are caused by a misconfigured kernel and reading your
kernel conf I found at least 2:
I suggest
On Fri, 14 Dec 2007 22:59:49 -0800
Gary Kline [EMAIL PROTECTED] wrote:
People,
I'd like to do a complete upgrade to see if I can fix whatever is
broken with evolution.
Evolution was updated a few days ago but there's no guarantee that
it will fix whatever. You might try
Quoting Erik Cederstrand [EMAIL PROTECTED]:
I've been bitten by this a couple of times. Can anyone give me a hint to
where in the rc scripts I can add that one-liner to at least print
something like:
$app not started. Please add $rcvar to /etc/rc.conf.
instead of just silently
Remko Lodder schrieb:
On Fri, December 14, 2007 5:37 pm, W. D. wrote:
At 09:50 12/12/2007, Remko Lodder wrote:
W. D. wrote:
Well, it's been 2 days now. When will the code be updated
in the FreeBSD ports? The version on the Samba website is
3.0.28.
V.I.Victor schrieb:
Because of /var size considerations, I'd like to use a symlinked
/usr directory for email instead of /var/mail.
Based on today's research, I think the following will work.
With mail delivery off, I 'su' and:
mkdir /usr/var.mail
cd /var
cp -p mail/*
Paul Schmehl schrieb:
I recently upgraded to 6.2 release (i386) on my desktop workstation,
and I'm experiencing occasional lockups that require restarting X to
resolve. I can ssh in to the box and kill the process and force a
restart, but the desktop is completely unusable - both mouse and
Predrag Punosevac wrote:
Any video posted on Youtube will work for youtube-dl . It will snap
the file in .flv format which can be player only with VLC and MPlayer.
Nothing else. Clive is capable of snapping videos from Google video as
well and has an additional capabilities to converting .flv
Frank Staals schrieb:
Since one of my discs is filling up rather quickly (Say disc A ) while
an other one stays quite empty (say disc B ) I would like to
distribute the content of a directory on disc A over both A and B. I
know I can simply move some of the files over to a sperate directory
When I connect the USB cable 'usbdevs -v' shows the line:
port 4 addr 2: high speed, self powered, config 1, NIKON DSC D300(0x041a),
NIKON(0x04b0), rev 1.00
But dmesg only shows:
ugen0: NIKON NIKON DSC D300, class 0/0, rev 2.00/1.00, addr 2 on uhub4
Older camera (SONY 828) that I connected
I think I figured out the reason by just looking at the kernel source.
I need to add device vendor/product ids into umass.c.
Yuri
Quoting Yuri [EMAIL PROTECTED]:
When I connect the USB cable 'usbdevs -v' shows the line:
port 4 addr 2: high speed, self powered, config 1, NIKON DSC
Zbigniew Komarnicki [EMAIL PROTECTED] writes:
Is there a good programming book for csh as for example for bash (free
available) ?
For bash is here:
http://tldp.org/LDP/abs/html/
Is such book for csh on the net (free available) ?
http://www.grymoire.com/Unix/Csh.html ?
There are some
On Dec 14, 2007 11:45 PM, Ted Mittelstaedt [EMAIL PROTECTED] wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Andrew Falanga
Sent: Friday, December 14, 2007 7:35 PM
To: Ted Mittelstaedt
Cc: Rob; FreeBSD Questions
Subject: Re: Suggestions
Rudy wrote:
The thing is, sometimes it runs fine, other times it backlogs (It may
complete at a latter date... the PID 82253 is still waiting ... Gonna
see it it completes instead of killing all the stuck crons...).
All the crons are cleared out right now... 'ps' shows only crond.
Related
Hello,
After turning tls/ssl on in Exim and installing dovecot (with pop3s
and imaps) I've been getting a panic:
kernel trap 12 with interrupts disabled
Fatel trap 12: page fault while in kernel mode
cpuid = 2; apic id = 06
fault virtual address = 0x104
fault code= supervisor read,
On Sat, Dec 15, 2007 at 01:03:14PM -0700, Elliot Finley wrote:
I have:
dumpdev=AUTO
in /etc/rc.conf and:
...
in the kernel and I'm still unable to obtain a crash dump. Hopefully
there is enough info in this email for a hacker to point me in the
right direction to debug this.
I can't help
Hello Yuri, perhaps you should try this command :
apachectl start|stop|restart|graceful
That works for me :)
Looking for last minute shopping deals?
Find them fast with Yahoo! Search.
Hello;
I have had an AMD64 754 system that I have 64 bit SCSI card and
two 15k rpm SCSI drives. It has been running fine with FreeBSD v 6.0
for about two years now. I have several things I wanted to change
and reconfigure, software wise, and hardware wise. The first was a new
case which I got
On Dec 15, 2007, at 5:21 PM, jekillen wrote:
Hello;
I have had an AMD64 754 system that I have 64 bit SCSI card and
two 15k rpm SCSI drives. It has been running fine with FreeBSD v 6.0
for about two years now. I have several things I wanted to change
and reconfigure, software wise, and
On Saturday 15 December 2007, Tino Engel wrote:
Frank Staals schrieb:
Since one of my discs is filling up rather quickly (Say disc A ) while
an other one stays quite empty (say disc B ) I would like to
distribute the content of a directory on disc A over both A and B. I
know I can simply
Hi
I`m using Creative SoundBlaster Audigy 1 card within FreeBSD RELENG-7.
When I hear to music from web radio, or watch some movie, sound from
Audigy card sounds like 3D or something like this on headphones.
When I tried my Realtek ALC888 on-board codec with snd_hda, sound in
headphone was
On Sat, 15 Dec 2007 15:58:10 -0800, you wrote:
On Sat, Dec 15, 2007 at 01:03:14PM -0700, Elliot Finley wrote:
I have:
dumpdev=AUTO
in /etc/rc.conf and:
...
in the kernel and I'm still unable to obtain a crash dump. Hopefully
there is enough info in this email for a hacker to point me in
On Sat, Dec 15, 2007 at 10:26:01AM -0500, Randy Pratt wrote:
On Fri, 14 Dec 2007 22:59:49 -0800
Gary Kline [EMAIL PROTECTED] wrote:
People,
I'd like to do a complete upgrade to see if I can fix whatever is
broken with evolution.
Evolution was updated a few days ago but
On 2007-12-15 13:54, Frank Shute [EMAIL PROTECTED] wrote:
% [EMAIL PROTECTED]:/usr/local/bin$ ls -ld mksh bash ksh
% -rwxr-xr-x 1 root wheel - 684699 Dec 9 19:51 bash
% -r-xr-xr-x 1 root wheel - 2390645 Aug 31 17:07 ksh
% -r-xr-xr-x 1 root wheel - 236202 Dec 9 18:34 mksh
Wow.
The FreeBSD Diary contains a large number of practical
examples and how-to guides. This message is posted weekly
to freebsd-questions@freebsd.org with the aim of letting people
know what's available on the website. Before you post a question
here it might be a good idea to first search the
On Sat, 15 Dec 2007 16:18:31 -0600 Kevin Kinsey [EMAIL PROTECTED] wrote:
Rudy wrote:
The thing is, sometimes it runs fine, other times it backlogs (It may
complete at a latter date... the PID 82253 is still waiting ... Gonna
see it it completes instead of killing all the stuck
Can anybody explain what causes xmms to give me this output::
Gtk-WARNING **: Failed to load module libgnomebreakpad.so: Shared object
libgnomebreakpad.so not found, required by xmms
and then to proceed to work very well? I thought xmms was'
window-manager agnostic, yet
36 matches
Mail list logo
