I'm running FreeBSD 6 stable and I lost my boot menu after reinstalling xp
and tried to fix it by booting with instalation cd and run "fdisk -B -b
/boot/boot0 /dev/ad0" it restored it but when I boot I get the mountroot>
prompt, it fails to mount ad0s2a, b, c, d. Is it possible to fix this or d
I'm running FreeBSD 6 stable and I lost my boot menu after reinstalling xp and
tried to fix it by booting with instalation cd and run "fdisk -B -b /boot/boot0
/dev/ad0" it restored it but when I boot I get the mountroot> prompt, it fails
to mount ad0s2a, b, c, d. Is it possible to fix this or d
Hello FreeBSD representative,
I am new to the FreeBSD community. In the past I have typically installed
a linux variant in my home systems, but recently decided to give FreeBSD a
try since I could not find a distribution that fit my needs.
I believe that fbsd is a good platform, but have found s
Jeffrey Goldberg <[EMAIL PROTECTED]> wrote:
>
> I've installed and configured syslog-ng from ports and no longer wish
> to have the standard syslogd run.
>
> Putting
>
>syslogd_enable="NO"
>
> into /etc/rc.conf did not prevent it from starting.
The above works on every system I've done it
I have 6.2 installed on an ancient AT machine. I'd like to have the OS
shut off the hard drive when I halt the system from the KDE interface.
What do I edit, and what code do I use to achieve this?
David
___
freebsd-questions@freebsd.org mailing list
I've installed and configured syslog-ng from ports and no longer wish
to have the standard syslogd run.
Putting
syslogd_enable="NO"
into /etc/rc.conf did not prevent it from starting.
Of course I can see lots of ways of preventing syslogd from starting.
I could remove the binary, I coul
On Sunday 30 December 2007 09:00:27 pm Darren Spruell wrote:
> There is the XDMCP option, which allows you to remotely connect to an
> X display manager for full, remote display sessions. This isn't
> regarded to be a secure solution by most people.
>
> If your remote system is a server, do you hav
On Dec 31, 2007 11:28 AM, jery <[EMAIL PROTECTED]> wrote:
> wrote:
> > I want to install rhel5 on same hard disk. Freebsd6.2 slice is on
> > primary partition , second OS is Fedora 7, 3rd is rhel4 (want to fresh
> > install rhel5 over rhel4) .
> > I can see freebsd mentioned in my rhel partiti
On Dec 30, 2007 7:16 PM, Jonathan Horne <[EMAIL PROTECTED]> wrote:
> On Thursday 27 December 2007 02:35:05 am Steve Franks wrote:
> > Perhaps I misunderstand, but I use x11vnc on the 'server' and
> > vncviewer or tightvnc on the 'client'. There are several pages to
> > google on tunneling it thru
On Thursday 27 December 2007 02:35:05 am Steve Franks wrote:
> Perhaps I misunderstand, but I use x11vnc on the 'server' and
> vncviewer or tightvnc on the 'client'. There are several pages to
> google on tunneling it thru ssh, and it's much better with latency
> than sending x iteslf over ssh, I'
I upgraded from 6.2 to 6.3-prerelease and I noticed something very
strange with bash (or perhaps readline).
I have had for many hears this in my .bash_login:
export LANG=en_US.ISO8859-15
This makes 8-bit characters come out as accented characters instead of
character codes like . However, w
On Dec 30, 2007 12:31 PM, Darren Spruell <[EMAIL PROTECTED]> wrote:
> On Dec 30, 2007 9:52 AM, Maxim Khitrov <[EMAIL PROTECTED]> wrote:
> > > I was trying to do something similar. I didn't research too hard, but
> > > figured the only way to use Bind would be to make my server authoritative
> >
On Dec 30, 2007 4:56 PM, Roland Smith <[EMAIL PROTECTED]> wrote:
> On Sun, Dec 30, 2007 at 04:00:12PM +0100, Michael Grant wrote:
> > I installed healthd hoping it would show me the cpu temperatures and
> > fan speeds for my motherboard but it's reporting some crazy values
> > like fan speeds of -4
On 17:56:46 Dec 30, Peter Boosten wrote:
> You mean: http://www.linuxjournal.com/article/9696
>
> ;-)
>
I got my math wrong and my memory failed. ;)
Thanks.
-Girish
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listin
On Dec 30, 2007 11:47 AM, Robert Fitzpatrick <[EMAIL PROTECTED]> wrote:
> > Running dump(8) and restore(8) would allow you to back up and restore
> > your system.
> >
> > http://www.freebsd.org/cgi/man.cgi?query=dump
> > http://www.freebsd.org/cgi/man.cgi?query=restore
> >
> > This is typically use
wrote:
I want to install rhel5 on same hard disk. Freebsd6.2 slice is on
primary partition , second OS is Fedora 7, 3rd is rhel4 (want to fresh
install rhel5 over rhel4) .
I can see freebsd mentioned in my rhel partitioning section, most
likely linux does not have support for freebsd slice.
Ede Ratzefick wrote:
> Hi,
>
> on my 6.2-RELEASE with acpi runnning, the script /etc/rc.suspend is not
> executed when going to S3 and also the /etc/rc.resume when waking up.
> Filepermissions are 755. Any ideas?
>
> BTW: Who's invoking these scripts? I saw it in apmd.conf but as I use acpi
>
अनुज wrote:
I want to install rhel5 on same hard disk. Freebsd6.2 slice is on
primary partition , second OS is Fedora 7, 3rd is rhel4 (want to fresh
install rhel5 over rhel4) .
I can see freebsd mentioned in my rhel partitioning section, most
likely linux does not have support for freebsd slice.
On Sun, 2007-12-30 at 11:10 -0700, Darren Spruell wrote:
> On Dec 30, 2007 10:54 AM, Robert Fitzpatrick <[EMAIL PROTECTED]> wrote:
> > I have a server running 5.4-RELEASE using RAID-5 on an Intel RAID
> > controller that I need to move to faster RAID. Is it possible to image
> > or some other way t
On Dec 30, 2007 10:54 AM, Robert Fitzpatrick <[EMAIL PROTECTED]> wrote:
> I have a server running 5.4-RELEASE using RAID-5 on an Intel RAID
> controller that I need to move to faster RAID. Is it possible to image
> or some other way to save the current install and restore after setting
> up the RAI
I have a server running 5.4-RELEASE using RAID-5 on an Intel RAID
controller that I need to move to faster RAID. Is it possible to image
or some other way to save the current install and restore after setting
up the RAID or should I just plan to reinstall everything?
--
Robert
__
Hi,
I bumped into a platform-specific problem when using the Firebird
database client library in a dlopen()ed module on FreeBSD. libdbi
(http://libdbi.sourceforge.net) is a database abstraction layer which
dlopen()s available database drivers at runtime to provide
connectivity to various database
I want to install rhel5 on same hard disk. Freebsd6.2 slice is on
primary partition , second OS is Fedora 7, 3rd is rhel4 (want to fresh
install rhel5 over rhel4) .
I can see freebsd mentioned in my rhel partitioning section, most
likely linux does not have support for freebsd slice.
Last time too
On Dec 30, 2007 9:52 AM, Maxim Khitrov <[EMAIL PROTECTED]> wrote:
> > I was trying to do something similar. I didn't research too hard, but
> > figured the only way to use Bind would be to make my server authoritative
> > for all those domains, which meant a huge config file and potential
> > o
Quoting Eric Crist <[EMAIL PROTECTED]>:
On Dec 28, 2007, at 12:47 PM, Stephen Montgomery-Smith wrote:
Mon Si wrote:
Dear list,
I'm experiencing problems when I try to portupgrade the xorg-driver
port. The old version of the port can't be uninstalled during the
portupgrade due to an undefined
Quoting Girish Venkatachalam <[EMAIL PROTECTED]>:
You can trivially do this with the convert command. Refer to my article.
http://linuxjournal.com/9566
You mean: http://www.linuxjournal.com/article/9696
;-)
Peter
--
http://www.boosten.org
___
fr
On Dec 28, 2007 11:28 AM, Rob <[EMAIL PROTECTED]> wrote:
> Kevin Kinsey wrote:
> > Just a question, and I'm not trying to cast doubt on your plan; I'm
> > curious why using BIND for this purpose instead of a proxy, which is
> > a more typical application as I understand it?
>
> I was trying to do s
Hi there,
On 30/12/2007, अनुज <[EMAIL PROTECTED]> wrote:
> Hello ,
> I have freebsd6.2 installed with Fedora core 7 and rhe4.
> I am installing rhel5 , when linux installation process starts I get an
> error of /dev/hdc1 busy , can not report to kernel about partition
> layout. In the past I insta
On Sun, Dec 30, 2007 at 10:11:10AM -0600, Jonathan Horne wrote:
> what are some good 'desktop-docked' system info apps (that run well in
> freebsd), that might be similar in function to grkellm?
>
> i saw many screenshots of beautiful apps for superkaramba, but was pretty
> disappointed that mos
Does anyone know the answer to this? I am stuck as to how to proceed?
Tankko
On Dec 28, 2007 9:40 AM, Tankko <[EMAIL PROTECTED]> wrote:
> I am upgrading apache...
>
> apache-2.2.6_2 < needs updating (port has 2.2.6_3)
>
> ...and I get the following error:
>
>
>
> ---> Installing t
what are some good 'desktop-docked' system info apps (that run well in
freebsd), that might be similar in function to grkellm?
i saw many screenshots of beautiful apps for superkaramba, but was pretty
disappointed that most of them only understand linux devices and fstabs. was
wondering what g
Jonathan Horne wrote:
On Sunday 30 December 2007 05:27:15 am Kris Kennaway wrote:
Yes, ULE is the recommended scheduler.
out of curiosity, if the ULE is becoming the standard, then why does the
GENERIC config still have the 4BSD as the default?
Release engineers wanted to be conservative in
On Sun, Dec 30, 2007 at 04:00:12PM +0100, Michael Grant wrote:
> I installed healthd hoping it would show me the cpu temperatures and
> fan speeds for my motherboard but it's reporting some crazy values
> like fan speeds of -48C and fan speeds of 13000 rpms.
:-)
[snip]
> SuperMicro provides a wi
On Sunday 30 December 2007 05:27:15 am Kris Kennaway wrote:
> Yes, ULE is the recommended scheduler.
out of curiosity, if the ULE is becoming the standard, then why does the
GENERIC config still have the 4BSD as the default?
im curious to know, since im rebuilding a badly-behaving 7.0-RC1 box th
Hi,
on my 6.2-RELEASE with acpi runnning, the script /etc/rc.suspend is not
executed when going to S3 and also the /etc/rc.resume when waking up.
Filepermissions are 755. Any ideas?
BTW: Who's invoking these scripts? I saw it in apmd.conf but as I use acpi
instead of apm this should not be rel
I installed healthd hoping it would show me the cpu temperatures and
fan speeds for my motherboard but it's reporting some crazy values
like fan speeds of -48C and fan speeds of 13000 rpms.
My motherboard is a SuperMicro X6DH3-G2 which does support this
feature. There's a 6300ESB on the board whi
On Sat, 29 Dec 2007 19:40:25 +0100
"Warren Head" <[EMAIL PROTECTED]> wrote:
> 2007/12/29, Eric Osterweil <[EMAIL PROTECTED]>:
> >
> > -BEGIN PGP SIGNED MESSAGE-
> > Hash: SHA1
> >
> >
> > Should I be using a different arch? Do I need a flag in the
> > make.conf (I just have -pipe and -O2)
On Sat, 29 Dec 2007, W. D. wrote:
> At 08:49 12/22/2007, Ian Smith wrote:
> >Warning: overlong message.
> > > > > >W. D. wrote:
[.. slashing mercilessly ..]
> >Ok, so your nameserver will be making upstream requests too, and you'll
> >need to do TCP 53 traffic with your secondary nameserver/
Hello ,
I have freebsd6.2 installed with Fedora core 7 and rhe4.
I am installing rhel5 , when linux installation process starts I get an
error of /dev/hdc1 busy , can not report to kernel about partition
layout. In the past I installed linux then FreeBSD.
Is there some method that rhel5 installatio
On 2007-12-28 Ted Mittelstaedt wrote:
>
> We run FreeBSD64 AMD build on HP DL320 G5 and it works great.
>
> But we use the embedded SATA chip on the MB, not the HP SmartArray
> card. I'm interested in your experiences with the SmartArray card.
>
> >
> > Does anybody have some experience with H
Sergio,
On Dec 28, 2007 10:06 PM, Sergio Lenzi <[EMAIL PROTECTED]> wrote:
>
>
> Em Sex, 2007-12-28 às 12:17 +0100, [EMAIL PROTECTED] escreveu:
>
> Hello All,
>
> is anyone using ekiga? ekiga runs and connects to [EMAIL PROTECTED] ( test
> number ).
>
> but when i hang up, or change volume using
On Sat, Dec 29, 2007 at 11:24:44AM -0500, Mikhail T. wrote:
> I managed to suspend some of my computers a few times (using
> either ``zzz'' or ``acpiconf -s 1''), but I could never successfully
> wake the system up after this, requiring a full reboot.
>
> What's the proper procedure? I tried the p
42 matches
Mail list logo
