.
As you can see there is a problem.
Jesse A. Coddington
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
, cron is going to -2. I don't know if this will
help, but I figured that I'd include it.
Thank you,
Jesse A. Coddington
-Original Message-
Jesse A. Coddington said:
Here's an example of what happens.
ns1# top
last pid: 153; load averages: 0.00, 0.00, 0.00
up 0+00:19:34
anyone have any suggestions as to how I can resolve this
issue?
Thank you,
Jesse A. Coddington
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Elvedin,
I'm using the newest drivers (iir), which are the ones that are already
built into FreeBSD.
Jesse A. Coddington
-Original Message-
From: Elvedin [mailto:[EMAIL PROTECTED]
Sent: Monday, March 22, 2004 4:51 PM
To: Jesse A. Coddington
Cc: [EMAIL PROTECTED]
Subject: Re
On Monday 22 March 2004 03:26 pm, Jesse A. Coddington wrote:
After doing a little more research, I found out that it is the GDT8546RZ
SATA raid card causing the freezing within FreeBSD.
I took out the raid card and used the onboard SATA controller and
installed
FreeBSD 4.9 on one hard
?).
- Mark
Mark,
The one motherboard that I'm running is a D865GLC by Intel, which has an
onboard SATA controller (Intel 82801EB I/O Controller Hub (ICH5) with AHA
bus). The raid card that I'm trying to run is the GDT8546RZ, which is made
by ICP.
Thank you,
Jesse A. Coddington
and then the system
freezes. I've tried disabling Hyper Threading thinking that this may be the
problem, but the problem still exists.
Has anyone seen this problem before and if so, is there a solution? If no
one has seen this problem, I'm open to resolve this issue.
Thank you,
Jesse A. Coddington
-
From: Elvedin [mailto:[EMAIL PROTECTED]
Sent: Monday, March 22, 2004 12:45 AM
To: Jesse A. Coddington
Cc: [EMAIL PROTECTED]
Subject: Re: FreeBSD 4.9 freezes
Jesse A. Coddington wrote:
Hello,
Recently I purchased the D865GLC motherboard. The computer has an Intel
D865GLC motherboard, 3
26 root 18 0 212K96K pause0:00 0.00% 0.00% adjkerntz
ns1# top
This will just sit there and do nothing. This isn't just limited to top.
It's stopped responding while doing makes of ports, cvsuping, etc.
Thank you,
Jesse A. Coddington
-Original Message
Maria,
Just to see if that was the problem, I removed the case and ran the server.
After about the same amount of time, it freezes.
Jesse A. Coddington
-Original Message-
From: mario [mailto:[EMAIL PROTECTED]
Sent: Monday, March 22, 2004 1:42 AM
To: [EMAIL PROTECTED]
Cc: [EMAIL
Pote,
I can assure you that this isn't the problem.
Jesse A. Coddington
-Original Message-
From: Supote Leelasupphakorn [mailto:[EMAIL PROTECTED]
Sent: Monday, March 22, 2004 1:57 AM
To: Jesse A. Coddington
Cc: [EMAIL PROTECTED]
Subject: RE: FreeBSD 4.9 freezes
To...
Have you
11 matches
Mail list logo
