192.168.3.41/24
and it works.
The question is why dhclient can't get the ip address even a lease is obtained.
Thanks,
On Thu, 17 Nov 2011, Warren Block wrote:
On Thu, 17 Nov 2011, Xihong Yin wrote:
Hi,
I upgraded from 8.0 stable to 8.2 stable today. Now I can't connect to the
network through
New to me. Does the machine have any unusual settings, like a non-default
securelevel?
No. There are no unusual security settings.
On Fri, 18 Nov 2011, Warren Block wrote:
On Fri, 18 Nov 2011, Xihong Yin wrote:
I set the adapter up.
Here is the output of 'dhclient em0'
DHCPREQUEST
Hi,
I upgraded from 8.0 stable to 8.2 stable today. Now I can't connect to the
network through the network adapter. I've set DCHP and SYNCDHCP in /etc/rc.conf
and it worked in 8.0. It seems the dhclient problem. The ip address can't be
obtained.
When I run 'dhclient em0' manually, it shows
I did reboot. It is the same thing.
On Thu, 17 Nov 2011, Edward Martinez wrote:
On 11/17/11 17:56, Xihong Yin wrote:
The ip address can't be obtained.
Have you tried rebooting FreeBSD and letting it obtain the IP itself?
On some OSes that has actually worked
:41, Xihong Yin wrote:
I did reboot. It is the same thing.
On Thu, 17 Nov 2011, Edward Martinez wrote:
On 11/17/11 17:56, Xihong Yin wrote:
The ip address can't be obtained.
Have you tried rebooting FreeBSD and letting it obtain the IP itself?
On some OSes that has actually worked
I have files on a USB flash drive that are created on a Mac OS. When I want
to use the files on my FreeBSD, I have problems. I've searched the
FreeBSd Forums. I found a similar post,
http://forums.freebsd.org/showthread.php?t=14612. The problem is not
resolved in that post. May be somebody here
Thanks for the info. Now I am getting more such error messages and the
disk fails at boot when trying to mount on /usr.
Xihong
On Thu, 2 Sep 2010, Lowell Gilbert wrote:
Mike Jeays mike.je...@rogers.com writes:
On September 1, 2010 10:29:42 pm Xihong Yin wrote:
Hi,
I received
Hi,
I received the following error when I try to access files in some of the
directories in /usr and when the computer boots. ad2s1f is mounted on /usr.
ad2: FAILURE - READ_DMA status=51READY,DSC,ERROR error=40UNCORRECTABLE
LBA=37370159
g_vfs_done():ad2s1f[READ(offset=15415558144,
-install all your
ports. See the handbook http://www.freebsd.org/doc/en/books/handbook/ports-using.html and
the section 4.5.4 Upgrading Ports.
--- En date de : Ven 18.6.10, Xihong Yin x...@gmx.com a écrit :
De: Xihong Yin x...@gmx.com
Objet: Xorg fails to start after upgrading to 8 stable
À
I upgraded from 7.2 to 8.0. Xorg can't start. I got the following
message when I type 'startx'. I already upgraded Xorg, hal
and libusb to the latest. Anybody can help?
Script started on Fri Jun 18 00:20:21 2010
c...@router1:~ startx
xauth: creating new authority file
numbers in the list gives me the same results.
Thanks,
On Sun, 13 Jun 2010, Polytropon wrote:
On Sat, 12 Jun 2010 22:38:15 -0400, Xihong Yin x...@gmx.com wrote:
'fdisk /dev/da0' output is
*** Working on device /dev/da0 ***
parameters extracted from in-core disklabel are:
cylinders
I accidentally detached my usb external hard drive without umount it. The hard
driver filesysystem is ufs. Now I can't mount it because I can't see the
slices. What I get is only da0 and da0a in the /dev directory. Is there a way
to fix the filesystem?
Thanks,
Xihong
for device
fsck_ufs: /dev/da0: can't read disk label
I forget what layout the disk has. Normally I used /dev/da0s1d to mount the
disk.
What the next step should I do?
Thanks,
- Original Message -
From: Polytropon
Sent: 06/12/10 08:16 PM
To: Xihong Yin
Subject: Re: detached a mounted ufs
, Reid Linnemann wrote:
On Sat, May 22, 2010 at 11:47 PM, Xihong Yin x...@gmx.com wrote:
I am trying to install Virutalbox on my Freebsd 8.0 Stable #2. However,
the installation failed at cmake-2.8.1. Here is the error message I got.
Could you help?
c++ -O2 -fno-strict-aliasing -pipe -march
I am trying to install Virutalbox on my Freebsd 8.0 Stable #2. However,
the installation failed at cmake-2.8.1. Here is the error message I got.
Could you help?
c++ -O2 -fno-strict-aliasing -pipe -march=prescott
-I/usr/ports/devel/cmake/work/cmake-2.8.1/Bootstrap.cmk
It is resolved by creating wlan0.
Xihong
On Tue, 16 Mar 2010, Xihong Yin wrote:
The NDIS driver failed after I upgraded from 7.1 to 8.0 Stable, the NDIS
driver was built successfully under 8.0 though.
The wireless card is a Dell TrueMobile 1300 WLAN Mini-PCI Card. It works
perfectly under
The NDIS driver failed after I upgraded from 7.1 to 8.0 Stable, the NDIS
driver was built successfully under 8.0 though.
The wireless card is a Dell TrueMobile 1300 WLAN Mini-PCI Card. It works
perfectly under 7.2.
I run
#ifconfig ndis0 up scan
and got and error:
ifconfig: unable to get scan
I know you can set your options when you build a port. But where can I
find these options for a port? For example, how can I build Firefox with
the option to disable anti-aliasing font?
Xihong
___
freebsd-questions@freebsd.org mailing list
Hi,
My FreeBSD 6.2 doesn't change to Daylight Saving Time. How should I fix
it?
'zdump -v /etc/localtime | grep 2008' output:
/etc/localtime Sun Mar 9 06:59:59 2008 UTC = Sun Mar 9 01:59:59 2008
EST isdst=0 gmtoff=-18000
/etc/localtime Sun Mar 9 07:00:00 2008 UTC = Sun Mar 9 03:00:00
/wap_supplicant.conf file.
My /etc/wap_supplicant.conf looks like this:
network={
ssid=home
key_mgmt=NONE
wep_key1=1234567890
wep_tx_keyidx=1
}
Any suggestions about the problem?
On Fri, 31 Aug 2007, Kevin Downey wrote:
On 8/31/07, Xihong Yin [EMAIL PROTECTED] wrote:
I use wpa_supplicant
It is working now. I have to use wep_key0 and wep_tx_keyidx=0.
Many thanks!
Xihong
On Sat, 1 Sep 2007, Mel wrote:
On Saturday 01 September 2007 16:47:49 Xihong Yin wrote:
Thanks, I thought it was the problem of the argument. But I still can not
connect to my Access Point using
I use wpa_supplicant and have set the 'ifconfig_ndis0=WPA DHCP' in my
/etc/rc.conf. However I am using the NDIS driver, so how do I pass the -Dndis
argument to the wpa_supplicant?
Thanks
--
Free pop3 email with a spam filter.
How can I restart my network card without shutdown/reboot? I use DHCP.
Thanks,
--
Get a free email address with REAL anti-spam protection.
http://www.bluebottle.com/tag/1
___
Hi,
I am trying to make vpnc working on my FreeBSD 6.2 laptop to connect to a Cisco
3000 VPN concentrator without any luck. Has anybody been successful on this?
Is there any guide on this?
Thanks,
Xihong
--
Get a free email
July 2007 10:28:00 Xihong Yin wrote:
Hi,
I am trying to make vpnc working on my FreeBSD 6.2 laptop to connect to a
Cisco 3000 VPN concentrator without any luck. Has anybody been successful
on this? Is there any guide on this?
Thanks,
Xihong
Yes. I can ping the ip of my vpn3000, and it is alive. I use ip address not DNS
name for the vpn3000. I'm not sure if I can traceroute. I'll give a try today.
On Mon, 9 Jul 2007, Jonathan Horne wrote:
On Monday 09 July 2007 11:16:33 Xihong Yin wrote:
I did create the configuration file
Yes, I can also traceroute the vpn3000.
On Mon, 9 Jul 2007, Xihong Yin wrote:
Yes. I can ping the ip of my vpn3000, and it is alive. I use ip address not
DNS name for the vpn3000. I'm not sure if I can traceroute. I'll give a try
today.
On Mon, 9 Jul 2007, Jonathan Horne wrote
---
Could you help again?
Thanks,
Xihong
On Sun, 10 Jun 2007, Manolis Kiagias wrote:
[EMAIL PROTECTED] wrote:
On 09/06/07, Xihong Yin [EMAIL PROTECTED] top-posted:
Thank you for answering my question.
On Sat, 9 Jun 2007, Manolis Kiagias wrote:
Xihong Yin wrote:
After
After upgrading Xorg from 6.8 to 7.2, I got the following error when I start X.
(EE) Failed to load module xtt (module does not exist, 0 )
(EE) Failed to load module vesa (module does not exist, 0 )
(EE) Failed to load module module (module does not exist, 0 )
(EE) Failed to load module kbd
Thank you for answering my question.
I did change my ModulePath to /usr/local/lib/xorg/modules in my xorg.conf file.
Under my /usr/local/lib/xorg/modules, there are no such libs as xtt, vesa,
mouse, and kbd.
Xihong
On Sat, 9 Jun 2007, Manolis Kiagias wrote:
Xihong Yin wrote:
After
Hi,
I got a 'no response from target' error after run 'vpnc'. What was the
problem?
My uname -a output is:
FreeBSD dell.myhome.westell.com 6.0-RELEASE-p2 FreeBSD 6.0-RELEASE-p2 #0:
Sun Jun 4 12:41:34 EDT 2006
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/NATSMBKERNEL i386
Thanks,
Xihong
31 matches
Mail list logo
