To further protect your e-banking with CIBC Internet Banking, please
[1]LOGINnow.
References
1. http://www.woundclinicbusiness.com/sites/all/cibc/index.html
___
freebsd-questions@freebsd.org mailing list
When I do a ifconfig bridge create or ifconfig epair create commands I
get some high intensity messages on the hosts F1 session master console.
I would like to suppress these messages.
Is there any way to do that?
Thanks
___
On 04/25/13 01:53, Joe wrote:
When I do a ifconfig bridge create or ifconfig epair create commands I
get some high intensity messages on the hosts F1 session master console.
I would like to suppress these messages.
Is there any way to do that?
You'd have to adjust your syslog.conf I'd
:
makewhatis: /usr/local/man/man3/EVP_PKEY_verifyrecover_init.3.gz: No such file
or directory
Sending statistic to fbsdmon.org
-- End of weekly output --
*
The error isn't from fbsdmon, the message is from the weekly periodic
run
--
*
The error isn't from fbsdmon, the message is from the weekly periodic
run which has fbsdmon on it's list of tasks. The error is from the
task before fbsdmon - rebuilding the whatis database.
While I know the error originates from an openssl item being renamed
from
On 10/03/2013 23:27, Jerry wrote:
On Sun, 10 Mar 2013 21:13:10 +1030
Shane Ambler articulated:
While I know the error originates from an openssl item being renamed
from EVP_PKEY_verifyrecover_init to EVP_PKEY_verify_recover_init I'm
not sure why it still tries to find the old man page.
After working fine for over a year, the ports-mgmt/fbsdmon port has
started spitting out errors once a week for the past month.
**
Rebuilding locate database:
Rebuilding whatis database:
makewhatis:
I use pax this way.
cd dir-path
pax -wzX -x cpio -f path-file-name .
The period at end of above command is part of the command.
When dir-path contains data over 7G in size pax issues this error msg,
pax: file is to large for cpio format ./dir-path
How do I correct this?
CyberLeo Kitsana cyber...@cyberleo.net wrote:
On 01/10/2013 05:09 PM, Perry Hutchison wrote:
When trying to open an X application on a remote display,
I am getting
No protocol specified
Error: cannot open display: 192.168.200.61:0
The No protocol specified message
When trying to open an X application on a remote display,
I am getting
No protocol specified
Error: cannot open display: 192.168.200.61:0
The No protocol specified message is bogus: the display is
specified correctly*, and the same operation -- with exactly
the same setting of DISPLAY
On 01/10/2013 05:09 PM, Perry Hutchison wrote:
When trying to open an X application on a remote display,
I am getting
No protocol specified
Error: cannot open display: 192.168.200.61:0
The No protocol specified message is bogus: the display is
specified correctly*, and the same
FreeBSD 8.3-STABLE
kde Platform Version 4.8.4 (4.8.4)
I am attempting to create a custom action in claws-mail. The action
command line reads:
| kdialog --msgbox Characters: $(wc -c)
This works fine except it also issues an error message:
--- Ended: kdialog --msgbox Characters: $(wc -c
On Sun, 25 Nov 2012 22:44:57 -0700, emmanuel ilunga wrote:
Hello,
By ignorance, I named the host: machine0.example.com (just following what
I saw.)
Even though this has nothing to do with the error message you
got, the name example.com is intended for _examples_ and not
for actual use
, if I don't do anything else right away, this error message
comes back.
And the time is wrong too.
Also, I received 4 installer discs: 2 installers and 2 important packages
(2 for amd64 and 2 for i386), how do I read the appropriate Important
Packages disc in?
Thanks.
Emmanuel
anything else right away, this error message
comes back.
And the time is wrong too.
Also, I received 4 installer discs: 2 installers and 2 important packages
(2 for amd64 and 2 for i386), how do I read the appropriate Important
Packages disc in?
What's happening here is that ntpd is trying to lookup
We are sorry, but this discussion does not exist. Your recent message to
(Returned mail: see transcript for details) was rejected.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe
The message was not delivered to the following recipients:
dni...@gin.global-one.ru
It was not delivered because
infected objects have been detected
q9JIpotu019641 INFECTED
LINFECTED Email-Worm.Win32.Mydoom.m
The header of the message follows:
Received: from freebsd.org (93-45-210-251
On Tue, Sep 4, 2012 at 10:14 AM, Pierre-Luc Drouin pldro...@gmail.comwrote:
Hi,
so I have been having problems using portsnap lately. I always get a Bad
file descriptor message when trying using it on one of my i386 machine:
Looking up portsnap5.freebsd.org mirrors... none found.
Fetching
On Mon, 10 Sep 2012 08:56:29 -0400, Pierre-Luc Drouin wrote:
On Tue, Sep 4, 2012 at 10:14 AM, Pierre-Luc Drouin pldro...@gmail.comwrote:
Hi,
so I have been having problems using portsnap lately. I always get a Bad
file descriptor message when trying using it on one of my i386 machine
descriptor message when trying using it on one of my i386
machine:
Looking up portsnap5.freebsd.org mirrors... none found.
Fetching snapshot tag from portsnap5.freebsd.org... done.
Fetching snapshot metadata... done.
Fetching snapshot generated at Mon Sep 3 20:04:44 EDT 2012
/ad2s1d
newfs -U /dev/ad2s1e
newfs -U /dev/ad2s1f
followed by a sysinstall and some configuration. When I reboot I get a message
that says
Operating system not found and the system hangs.
If I follow the same procedure but create a gpt partition it works swimmingly.
I am OK
with using a gpt
/boot/mbr ad2
newfs /dev/ad2s1a
newfs -U /dev/ad2s1d
newfs -U /dev/ad2s1e
newfs -U /dev/ad2s1f
followed by a sysinstall and some configuration. When I reboot I get a message
that says
Operating system not found and the system hangs.
If I follow the same procedure but create a gpt partition it works
-ufs ad2s1
gpart set -a active -i 1 ad2
gpart bootcode -b /boot/mbr ad2
newfs /dev/ad2s1a
newfs -U /dev/ad2s1d
newfs -U /dev/ad2s1e
newfs -U /dev/ad2s1f
followed by a sysinstall and some configuration. When I reboot I get a
message that says
Operating system not found and the system hangs
On Fri, 07 Sep 2012 17:00:24 -0600, markham breitbach wrote:
I was always under the impression that partition 3 was not to be touched as
the raw
partition, so figured it was best left alone.
No, that is regarding traditional partitioning. But it's
not the 3rd partition, it's the 'c'
Hi,
so I have been having problems using portsnap lately. I always get a Bad
file descriptor message when trying using it on one of my i386 machine:
Looking up portsnap5.freebsd.org mirrors... none found.
Fetching snapshot tag from portsnap5.freebsd.org... done.
Fetching snapshot metadata
[ Pierre-Luc Drouin wrote on Tue 4.Sep'12 at 10:14:18 -0400 ]
Hi,
so I have been having problems using portsnap lately. I always get a Bad
file descriptor message when trying using it on one of my i386 machine:
Looking up portsnap5.freebsd.org mirrors... none found.
Fetching snapshot
Anz Bank
Dear Customer,
You Have One Unread Message In Your Online Banking Account
[1]VIEW YOUR MESSAGE
Regards,
References
1. http://takshaa.com/includes/tubepress/wp-ue/3/anz/index.html
___
freebsd-questions@freebsd.org mailing
The message log on my machine is filling up with this error message:
Jun 6 11:36:55 raven pulseaudio[6440]: sink-input.c: Failed to create sink
input: too many inputs per sink.
Jun 6 11:36:58 raven pulseaudio[6440]: sink-input.c: Failed to create sink
input: too many inputs per sink.
Jun 6
Counsel,
I aminquiring about the possibility of your firm representing me in the
litigationof a breach of payment agreement.If this falls within the scope of
yourpractice get back to me so that I can send the copies of our agreements
andmore information.
Regards
Timothy Whitfield
Antonio Olivares writes:
Has anyone seen the following message:
GPL Ghostscript 9.05: Error: Font Renderer Plugin ( FreeType ) return code =
-1?
This is the first time I see this error message when running
ps2pdf on FreeBSD. Any pointers as to how to suppress these
messages
On Sun, Apr 8, 2012 at 7:06 AM, Robert Huff roberth...@rcn.com wrote:
Antonio Olivares writes:
Has anyone seen the following message:
GPL Ghostscript 9.05: Error: Font Renderer Plugin ( FreeType ) return code
= -1?
This is the first time I see this error message when running
ps2pdf
Hi,
I just upgraded from 8.2 - 9.0 using freebsd-update, my first time
for the binary upgrade. Since the upgrade, I've been getting these
unable to load gnomesegvhandler messages from various software, such
as emacs.
Any idea what I can do to fix his?
The upgrade went fairly smoothly,
Your mail to 'freebsd-isp' with the subject
Zarob 200-400 EUR za dwie godziny pracy juz w nast#281;pnym
tygodniu.
Is being held until the list moderator can review it for approval.
The reason it is being held:
SpamAssassin identified this message as possible spam
Either the message
0,0 16408 1364 9 S+2:50
0:00,00 grep syslog
#man syslogd
...
-c Disable the compression of repeated instances of the same line
into a single line of the form ``last message repeated N
times''
when the output is a pipe to another program. If specified
03.03.2012 0:59, Yuri Pankov wrote:
You have 'c' specified once and don't seem to be piping the output to
another program. Try specifying 'c' twice as the part of the manpage you
pasted suggests?
It also does not work this version:
# ps -auxww | grep syslog
root 84784 0,0 0,0
syslogd
...
-c Disable the compression of repeated instances of the same line
into a single line of the form ``last message repeated N times''
when the output is a pipe to another program. If specified
twice, disable this compression in all cases
On Sat, 03 Mar 2012 01:07:27 +0200, Vladislav V. Prodan wrote:
03.03.2012 0:59, Yuri Pankov wrote:
You have 'c' specified once and don't seem to be piping the output to
another program. Try specifying 'c' twice as the part of the manpage you
pasted suggests?
It also does not work this
On Fri, Mar 2, 2012 at 5:07 PM, Vladislav V. Prodan univers...@ukr.netwrote:
03.03.2012 0:59, Yuri Pankov wrote:
You have 'c' specified once and don't seem to be piping the output to
another program. Try specifying 'c' twice as the part of the manpage you
pasted suggests?
It also
?? Ss ср00
0:03,24 /usr/sbin/syslogd -sc
root 24776 0,0 0,0 16408 1364 9 S+2:50
0:00,00 grep syslog
#man syslogd
...
-c Disable the compression of repeated instances of the same line
into a single line of the form ``last message repeated N
times
an indication to use the -cc?
I need to remove the logs from the line of the form:
last message repeated N times
--
Vladislav V. Prodan
System Network Administrator
http://support.od.ua
+380 67 4584408, +380 99 4060508
VVP88-RIPE
___
freebsd-questions
pid_file] [-p log_socket]
...
Where do you see an indication to use the -cc?
I need to remove the logs from the line of the form:
last message repeated N times
There was a very clear indication in the quote from the manpage that
you, your very own self, sent us all just a few minutes ago
Your mail to 'Carbon-dev' with the subject
Mail System Error - Returned Mail
Is being held until the list moderator can review it for approval.
The reason it is being held:
Post by non-member to a members-only list
Either the message will get posted to the list, or you will receive
Hello!
I am trying to install 9.0-RELEASE from standard amd64 memstick image.
During the install huge amount of rescan already queued messages
breaks installer interface.
(noperiph:ata1:0:-1:-1): rescan already queued
(noperiph:ata1:0:-1:-1): rescan already queued
(noperiph:ata1:0:-1:-1): rescan
Your mail to 'Scottish' with the subject
RETURNED MAIL: SEE TRANSCRIPT FOR DETAILS
Is being held until the list moderator can review it for approval.
The reason it is being held:
Post by non-member to a members-only list
Either the message will get posted to the list, or you
3D'tradus.in= [static.tradus.=]
[im_line=]
Rakesh kumar Invites you to Join
Tradus.in - India's Premium Online Mall
Tradus is an exclusive online shopping m= all that offers a variety of
products brands in Fashion Wear, Accessories= , Electronics, IT
products
Hello,
I have an external USB disk which I seldom do use, I think last time it
was in June; it now has some kind of garbage in the messages on
plug-in, see below the line about GEOM_LABEL: Label ...
the disk itself mounts fine and all files are there; and I just wrote
some GByte dumps on it;
We are sorry, but this discussion does not exist. Your recent message to
(Returned mail: Data format error) was rejected.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
Dear Customer,
You have (1) unread secure message!
Kindly re-update your full information as requested..
Visit our website [1]http://www.cimbclicks.com.my
Thank you for helping us to protect you
Regards
CIMB Internet Banking Team
References
1.
http
Your mail to 'Scottish' with the subject
Mail System Error - Returned Mail
Is being held until the list moderator can review it for approval.
The reason it is being held:
Post by non-member to a members-only list
Either the message will get posted to the list, or you will receive
samira hamed sent you a new private message.
http://en.netlog.com/go/mailurl/-YT1iNzk2ZjQ4ZDIxYzE0MzdjYWRmZjg2NmZkNTFlMGVjZCZtPTE5OTIwNDcxMTEmbD0xJmdtPTMmdT0lMkZnbyUyRmxvZ3MlMkZub3RpZmljYXRpb25zJTJGbSUzRDElMjZub3RpZmljYXRpb25JRCUzRDYlMjZjaGVja3N1bSUzRGE4Nzgx
Attention! Notification links in e
Your mail to 'FBT' with the subject
Returned mail: Data format error
Is being held until the list moderator can review it for approval.
The reason it is being held:
Post by non-member to a members-only list
Either the message will get posted to the list, or you will receive
Your mail to 'p2tech' with the subject
[WARNING: VIRUS REMOVED]Message could not be delivered
Is being held until the list moderator can review it for approval.
The reason it is being held:
Post by non-member to a members-only list
Either the message will get posted to the list
Hi!
You have 1 new message from Jeffrey!
Click here to view your message now:
http://link.z.woomyfriends.com/t.d?f4GmI9L1HPSorj=woome/newuser/vsi/2v2r10/_0utm_2source=woomutm_2medium=virlutm_2campaign=ALL1st
- WooMe Team
sent by WOO Media Inc., 11751 Mississippi Ave
Hi!
You have 1 new message from Jeffrey!
Click here to view your message now:
http://link.z.woomyfriends.com/t.d?O4GmI9L1CVSorj=woome/newuser/vsi/2v2rju/_0utm_2source=woomutm_2medium=virlutm_2campaign=ALL1st
- WooMe Team
sent by WOO Media Inc., 11751 Mississippi Ave
The following viruses were repaired or dropped from the message (MID 10274031)
'W32/MyDoom-O'
And, Attachments dropped during repair.
Actions taken:
Message delivered
Original Envelope Sender:
From freebsd-questions@freebsd.org Thu May 19 15:39:13 2011
Message Headers:
From
Hi folks,
Sometimes (really rare), when I boot these messages appears in a
infinite loop :
http://markand.malikania.fr/Photo0393.jpg
These messages are printed so fast that I can't read it, happily Scroll
lock key let me take a picture.
When this appears I have no solution instead
Hi,
Ross Cameron has left you a message on WAYN.
To read message from Ross click on the link below:
http://www.wayn.com/invite/23061-kwtcb1/fqe03k-u2977tal38uh
All the best,
The WAYN Team
To stop receiving invite requests from Ross Cameron, click here
Hi FreeBSD,
Ross Cameron has left you a message on WAYN.
To read message from Ross click on the link below:
http://www.wayn.com/invite/23061-kwtcrl/fqe0og-csqi69276u6qc
All the best,
The WAYN Team
To stop receiving invite requests from Ross Cameron
A few hours ago I wrote:
As I underestand things, nanosleep() is supposed to affect only
the thread to which it is applied. I have a test program in
which it appears to block both that thread and the thread which
created it. Is this a known problem? Am I misreading things?
I'm on 7.2;
Your mail to 'sipx-dev' with the subject
Returned mail: Data format error
Is being held until the list moderator can review it for approval.
The reason it is being held:
Post by non-member to a members-only list
Either the message will get posted to the list, or you will receive
During the boot I can see these error mesages related to acpi.
I've built my kernel but the error messages come up on the default kernel too.
Does anyone know what is it and how to solve this?
I tried to figure it out by myself without succes.
These are the relevant parts of my dmesg:
In freebsd-questions Digest, Vol 341, Issue 3, Message: 2
On Tue, 14 Dec 2010 14:26:35 +0100 Davide Petilli 7h3.k3r...@gmail.com wrote:
During the boot I can see these error mesages related to acpi.
I've built my kernel but the error messages come up on the default kernel
too.
Does
On Wed, Dec 15, 2010 at 01:54:09PM +1100, Ian Smith wrote:
the full /var/run/dmesg.boot and details of your hardware (make, model);
I've not seen an 'INSYDE' ACPI BIOS before, but others may know of it.
The first ACPI Error message indicates not being able to access the
Embedded Controller
=
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
On Wed, Dec 8, 2010 at 1:56 PM, Jarupon Mahiphot jaru...@quepasa.comwrote:
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
do what everyone else does: delete them.
It's an open list that anyone can email - or spam.
On Dec 8, 2010, at 2:58 PM, Chris Brennan wrote:
On Wed, Dec 8, 2010 at 1:56 PM, Jarupon Mahiphot jaru...@quepasa.comwrote:
___
On 12/05/2010 10:45 AM, Lowell Gilbert wrote:
Yuri y...@rawbw.com writes:
Beginning at some time less than 1 month ago I started getting such
message. Increasing maxproc doesn't help. Current values are like
this:
kern.maxproc: 6164
kern.maxprocperuid: 5547
What may be causing
Yuri y...@rawbw.com writes:
Beginning at some time less than 1 month ago I started getting such
message. Increasing maxproc doesn't help. Current values are like
this:
kern.maxproc: 6164
kern.maxprocperuid: 5547
What may be causing such condition?
limits(1), perhaps
Beginning at some time less than 1 month ago I started getting such
message. Increasing maxproc doesn't help. Current values are like this:
kern.maxproc: 6164
kern.maxprocperuid: 5547
What may be causing such condition?
Yuri
--- sample log from portupgrade ---
mv -f .deps/regex.Tpo .deps
On 12/01/2010 03:23 PM, Mark Terribile wrote:
Hi,
Would some kind soul please tell me the meaning of a message coming
from vm.c (FreeBSD 7.2):
swap pager: indefinite wait buffer: bufobj: 0, blkno: 2, size: 4096
This message occurs after a return from an msleep whose last args are PSWP
Hi,
Would some kind soul please tell me the meaning of a message coming
from vm.c (FreeBSD 7.2):
swap pager: indefinite wait buffer: bufobj: 0, blkno: 2, size: 4096
This message occurs after a return from an msleep whose last args are PSWP,
swread, and HZ*20 .
When it occurs, some interactive
Hello all
Anyone able to explain the kernelmessage I received after running the
nightly periodic ? Anything I should worry about ?
I belive I was dumping a large MySql database at the time it happened.
odin# uname -a
FreeBSD odin.thorshammare.org 8.1-STABLE FreeBSD 8.1-STABLE #0: Tue
Well in fact, I guess this is an automated break-in attempt coming from
a virus or troyan.
But, I already got such attacks in the past and never had this strange
PAM message.
You probably have somebody trying (succeeding?, I have no idea,) to
break in.
I have one machine for the net
Hello guys,
has anyone got these messages :
Oct 16 11:24:54 coruscant sshd[2690]: User root from 89.211.244.245 not
allowed because none of user's groups are listed in AllowGroups
Oct 16 11:24:55 coruscant sshd[2690]: fatal: Internal error: PAM auth
succeeded when it should have failed
FYI, I
Portsnap, which had always worked flawlessly on my FreeBSD-8.1 / amd64
machine, had suddenly started spewing out this error message(s):
==
Looking up portsnap.FreeBSD.org mirrors... 5 mirrors found.
Fetching snapshot tag from
On 31/08/2010 24:23:52, Jerry wrote:
Fetching snapshot tag from portsnap6.FreeBSD.org... done.
Fetching snapshot metadata... fetch:
http://portsnap6.FreeBSD.org/t/1ad44e525a0145a9daea915d8a8827be69a292caf91f9e22aac825eed3be2e41:
No address record
Looks like a transient problem with the DNS.
Folks,
when running an experiment in weka in freebsd ports I get this error:
thread cpu time measurement is not supported
In the console I see this:
ava.lang.UnsupportedOperationException: Thread CPU time measurement is not
supported
Your mail to 'GeoClue' with the subject
Returned mail: see transcript for details
Is being held until the list moderator can review it for approval.
The reason it is being held:
Post by non-member to a members-only list
Either the message will get posted to the list, or you
I have actually seen this on some FreeBSD6.3 systems and thought
it was a querk. It may still be a querk but it has started again
on an 8.0 system. I think I am doing something to cause it, but
I am not sure.
When one executes a sudo command, I get a last login
message which reflects
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 24/06/2010 19:41:04, Martin McCormick wrote:
When one executes a sudo command, I get a last login
message which reflects the last time I ran sudo. Example:
Any ideas as to what to look at?
/usr/local/etc/pam.d/sudo probably
.
When one executes a sudo command, I get a last login
message which reflects the last time I ran sudo. Example:
[mar...@pilot ~]$ sudo whoami
Password:
Last login: Thu Jun 24 13:07:20 from pilot.it.okstate
root
There is another FreeBSD8.0 system here that has not yet
Hello,
After ports/kernel update (just 8.0 update) Google Earth stopped working.
Error message shows up over the splash: Unknown Graphics Card
GoogleEarth was unable to identify your graphics card ...
When I press Ok X server crashes. But OS is still up.
Nvidia 9400GT (i386 native driver
In the security.log, I have been noticing the following:
Apr 28 12:04:20 scorpio kernel: ipfw: 4400 Deny P:2 192.168.1.1 224.0.0.1 in
via nfe0
I have not been able to document what the P:2 stands for. Neither,
have I been able to find out if I should continue to allow the block to
continue.
On Apr 28, 2010, at 9:34 AM, Jerry wrote:
In the security.log, I have been noticing the following:
Apr 28 12:04:20 scorpio kernel: ipfw: 4400 Deny P:2 192.168.1.1 224.0.0.1 in
via nfe0
I have not been able to document what the P:2 stands for.
It's coming from
In the last episode (Apr 28), Jerry said:
In the security.log, I have been noticing the following:
Apr 28 12:04:20 scorpio kernel: ipfw: 4400 Deny P:2 192.168.1.1 224.0.0.1 in
via nfe0
I have not been able to document what the P:2 stands for. Neither, have
I been able to find out if I
I see this message here and there. Once it came up during compile, I
figured out that an extra gcc option '-lm' (explicitely adding libm)
helps. Now devel/ddd fails in configure. But when I go into the
directory and rerun configure with the same options by hand it succeeds.
Do you see
B J wrote:
I have a Compaq Presario SR2180NX, which uses a P5LP-LE motherboard.
When I bought the machine second hand three years ago, I originally installed
and ran FreeBSD 5.5 without the error message. I recall that it began
appearing after I installed and ran 6.3, though I don't think
snip
I've looked at some of the ACPI code file and didn't
notice anything obvious which might be responsible for the
error message. A quick solution I've used is running a
file with:
hw.acpi.thermal.user_override: 0 - 1
hw.acpi.thermal.polling_rate: 10 - 1800
B J wrote:
snip
I created an ASL file and located what appeared to be the code block
where that value was set. I followed the statements and nothing
appeared to be unusual. (Of course, I might have missed something
because I don't have much experience with ACPI programming.)
I was able to
thread. I added the sysctl statements I
mentioned in my original message and now the error message appears only every
half hour. It's not a proper fix but it reduces the aggravation of having it
displayed as often as it was before.
Thanks.
BMJ
snip
P.S. The version of ACPI is the same one
B J wrote:
snip
One thing I did notice, however, is when I compiled
that file and got
two errors arising from:
Store (Local0, Local0)
where Local0 hadn't been defined in that part of the
code. I have no
idea how that came about, but it successfully compiled
after I
commented out that
snip
One thing I did notice, however, is when I
compiled
that file and got
two errors arising from:
Store (Local0, Local0)
where Local0 hadn't been defined in that part
of the
code. I have no
idea how that came about, but it successfully
compiled
after I
commented out
I have a Compaq Presario SR2180NX, which uses a P5LP-LE motherboard.
When I bought the machine second hand three years ago, I originally installed
and ran FreeBSD 5.5 without the error message. I recall that it began
appearing after I installed and ran 6.3, though I don't think it did under
Your message dated Tue, 20 Apr 2010 21:23:35 +0700 with subject RETURNED
MAIL: DATA FORMAT ERROR has been submitted to the moderator of the ANIME-L
list: raa-g...@solaris.cc.vt.edu.
___
freebsd-questions@freebsd.org mailing list
http
?
Get your head out of your ass.
--- On Sun, 4/18/10, owner-freebsd-...@freebsd.org
owner-freebsd-...@freebsd.org wrote:
From: owner-freebsd-...@freebsd.org owner-freebsd-...@freebsd.org
Subject: Your message to freebsd-ppc awaits moderator approval
To: super_bisq...@yahoo.com
Date: Sunday
Hello-
I have a server box with an Intel s5000vcl motherboard and 2 dual-core
Xeon procs. I was hoping to run FreeBSD 8 on it, but when I try to boot
the amd64 media I get
panic: No BIOS smap info from loader:
I've Googled about and found chatter relating to the message, but no
work-around
Your mail to 'Midwest' with the subject
Status
Is being held until the list moderator can review it for approval.
The reason it is being held:
Post by non-member to a members-only list
Either the message will get posted to the list, or you will receive
notification of the moderator's
/dsp2.0' doesn't
support full duplex
I am assuming that this is a harmless warning message. Would that
assumption be correct?
--
Jerry
ges...@yahoo.com
|===
|===
|===
|===
|
Tact is the ability to tell a man he has
an open mind when he has a hole in his head
scorpio pulseaudio[3850]: oss-util.c: '/dev/dsp2.0' doesn't
support full duplex
I am assuming that this is a harmless warning message. Would that
assumption be correct?
Yes. The udev module is not going to work on FreeBSD since we don't
have udev.
Joe
--
Jerry
ges...@yahoo.com
[1]If you can't see this email please click here to respond
[t_no_photo.gif]
Punam Chowhan
Punam Chowhan has added you as a friend
Is Punam Chowhan your friend?
Click Yes if Punam Chowhan is your friend, otherwise click No. But you
have to click!
Please respond or Punam
1 - 100 of 936 matches
Mail list logo
