On 5.3 everything was working fine, I would be emailed daily/weekly/
monthly log reports. But now after upgrading to 5.4 I am seeing all
those log report emails being queued up in postfix.
The problem is it is trying to connect to the wrong IP...
the machines default IP is 1.1.1.1 (for
On 2005-05-15 02:03, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
On 5.3 everything was working fine, I would be emailed daily/weekly/
monthly log reports. But now after upgrading to 5.4 I am seeing all
those log report emails being queued up in postfix.
The problem is it is trying to connect
Dear,
Is there any experience successful Install FreeBSD in HP Integrity rx2600, is
there any problem when using FreeBSD ia64?
How to know/check that the system OS or application can running pure in 64bit?
can FreeBSD ia64 running pure 64bit ?
Thanks,
Andre
The FreeBSD Diary contains a large number of practical
examples and how-to guides. This message is posted weekly
to freebsd-questions@freebsd.org with the aim of letting people
know what's available on the website. Before you post a question
here it might be a good idea to first search the
On 14 May 2005 09:33:26 -0400, Lowell Gilbert
[EMAIL PROTECTED] wrote:
Abu Khaled [EMAIL PROTECTED] writes:
sendmail[1579]: NOQUEUE: SYSERR(root): /etc/mail/sendmail.cf: line
279: Unknown address family inet6 in Family=option
Comment out that line and the message will go away. Comment
Very bad...
My motherboard (Abit KV7) has 8 different bios release and none of
these seems to solve this issue. My 30GB disk on the other IDE
channel seems to work fine with FreeBSD.
Is this problem present silently with every OS (the problem exists but
is not reported) or only with FBSD?
Is this problem present silently with every OS (the problem exists but
is not reported)
yes. But, why is it a problem? It really isn't, you know.
The only BIOS thing concerning hard disks that any modern operating
system
uses is the BIOS routines to load the kernel. Whether the kernel is a
So are you saying that I should ignore the message during FBSD setup
and also ignore the message from PM too?
Just another question, is this fact common or I'm just the only one
who get it ?:D
Thanks again
Marcello
2005/5/15, Ted Mittelstaedt [EMAIL PROTECTED]:
Is this problem present
Jerry Bell wrote:
Typically this is caused by a kernel and utilities (like ps and w) being
out of sync. It sounds like you don't think that is the case, though. I
suppose it could be a problem with your procfs, but I'm not sure that
would cause this kind of symptom. My suspicion is still on
Richard Verwayen wrote:
Am Mittwoch, den 11.05.2005, 16:53 -0700 schrieb Dixit, Viraj:
Folks,
I have accidentally changed the permissions to my directories on my test
system. Now I cannot login either on console using root or any other login
account. I simply cannot login, the permissions
Xian wrote:
I have just set up a router and would like DNS caching on it. I have tried to
set it up an it kind of works, just computer using it as their nameserver
take ages on DNS queries, up to 4-5 seconds.
To set up the DNS caching I added the ip of another DNS server
to
Colin J. Raven wrote:
Hi all!
I occasionally get these in my daily security run output (which is
worrying in itself)
Limiting closed port RST response from 1629 to 200 packets per second
the number of these can range from one or two, to sometimes 25 - 30
although the latter case is
VnPenguin wrote:
Hi all,
On my FreeBSD 5.4 system, when I do reboot or shutdown -h and
reboot, there is always a warning at boot time:
WARNING: / was not properly dismounted
and fbsd starts filesystem check over / partition (~5GB) :(
Anyone could explain me why this ? Any solution for
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of fbsd_user
Sent: Saturday, May 14, 2005 12:54 PM
To: [EMAIL PROTECTED] ORG
Cc: [EMAIL PROTECTED]
Subject: 5.4 install disc1 will not find hard drive
Power management and APIC have been bios
Eirik Fossgård [EMAIL PROTECTED] wrote:
I have an IBM removable cdrom device which I'm trying to use under
FreeBSD-5.4 RELEASE. I connect it on the USB ports on my ThinkPad X40,
insert a cdrom (neil young) but I cannot mount it:
mount -t cd9660 /dev/cd0 /mnt/cdrom yields:
cd9660:
hi,
For the past weeks I have been receiving in my syslog the following
message
ikaros /kernel: unknown dynamic rule type 244
ikaros last message repeated XXX times
ipfw -d show | grep 244
does not show anything
I have rebooted the machine,
I have flushed reloaded the ruleset...the message
On Sun, May 15, 2005 at 05:02:16PM +1000, Andre Nas wrote:
Dear,
Is there any experience successful Install FreeBSD in HP Integrity rx2600, is
there any problem when using FreeBSD ia64?
How to know/check that the system OS or application can running pure in
64bit? can FreeBSD ia64
Hello:
I am sorry to bother you. But I was wondering if you found a solution
to your problem at the following site:
http://lists.freebsd.org/pipermail/freebsd-questions/2004-March/
042082.html
Unable to find device node for /dev/ad0s1b in /dev!
I am having the same problem with FreeBSD 5.4
fbsd_user [EMAIL PROTECTED] wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Fabian
Keil
Sent: Saturday, May 14, 2005 5:22 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED] ORG
Subject: Re: clone cd disk to cd disk
Its my understanding
Hello freebsd-questions,
i have 2 freebsd 5.4 running .
On one of them, if if do the classic netstat -an i do NOT see tcp
connection while i can see them on the other..
There are tcp connection on the box, at least me trough ssh (tcpdump
show it).
Any clue ?
thank you
--
Best regards,
On Saturday 14 May 2005 23:30, Ross Adams Lippert wrote:
I'm sorry I was not more specific.
/var has 256MB
/tmp has 256
/ has 256
/usr has 4500MB
newfs had been run on everything.
ftp was passive.
Since base is about 46MB of material, it seems it could put it
anywhere.
This occurs 3%
That is not my IP address or what is assigned, i was just using it
for simplicity...
How can I change the address it sends mail to? I rather change it to
[EMAIL PROTECTED] instead or [EMAIL PROTECTED] I can probably do that by
changing /etc/aliases but it's strange since I didn't need to do
Hello All,
I'm a newbie and manage a FreeBSD server, which only hosts my own websites,
also only me have shell accounts on this server. Someone sent out lots of
spams from my server today. I have stopped postfix and disabled mail command
to make sure no any emails will be sent to from this
web script. The sender was specified as [EMAIL PROTECTED] according to the
complaint email. I use phpBB, vBulletin and Awstats.
Most likely the attacker used a flaw in phpBB or awstats. Are you running
the latest versions of those? Otherwise, it is possible they found a
vulnerability in
Jerry Bell wrote:
web script. The sender was specified as [EMAIL PROTECTED] according to the
complaint email. I use phpBB, vBulletin and Awstats.
Most likely the attacker used a flaw in phpBB or awstats. Are you running
the latest versions of those? Otherwise, it is possible they found a
I'm new to writing expect scripts and need some help. The script will
telnet to a host and run some commands. I want the script to ping the
host to see if it's alive first before it telnets into it. Also, I
know the host is pingable meaning it responds to pings. If the host
doesn't respond to a
On Saturday 02 January 1999 11:20 pm, paul klatt wrote:
I am having a problem configuring x in free bsd I am having
problem disabling the virtual desktop the desktop is to large
for my monitor and the mouse does not work correctly. I would
appreciate the help. I am using the kde desktop
Being
Hopefully not too OT .. the only silly question being the unasked one ..
How do I test whether a sh argument is an integer or not, so as to avoid
failing on a syntax error from otherwise working code such as:
[ $3 -lt 10 -o $3 -gt 600 ] echo $0 $1 $2: $3 invalid exit 1
when $3 is a
I just did a clean install of FreeBSD 5.4. While booting up, the following
messages appears:
as0: 7665MB QUANTUM Bigfoot TX8.0AT/A04.0V00 [15574/16/63] at
ata0-master UDMA 33
ata1-slave: FAILURE - SETFEATURES SET TRANSFER MODE status=1ERROR
error=4ABORTED
acd0: DVDROM COMPAQ DVD-ROM
Kevin Pang wrote:
Hello All,
I'm a newbie and manage a FreeBSD server, which only hosts my own websites,
also only me have shell accounts on this server. Someone sent out lots of
spams from my server today. I have stopped postfix and disabled mail command
to make sure no any emails will be sent to
On Sun, 2005-05-15 at 14:09, Phusion wrote:
I'm new to writing expect scripts and need some help. The script will
telnet to a host and run some commands. I want the script to ping the
host to see if it's alive first before it telnets into it. Also, I
know the host is pingable meaning it
Hello. I'm trying to get MySQL4.0 working. I've installed it using
/stand/systinstall (as well as ports method on another attempt).
I got a report from sysinstall that MySQL was installed. That's
both the client and the server (it caught the dependencies.)
But here's the problem: I can't
vi /etc/rc.conf
mysql_enable=YES
:wq
/usr/local/etc/rc.d/mysql-server.sh start
mysql
and you should be fine. read what the port installation says the next time
you install a port ;-)
--
Chris.
I love deadlines. I especially love the whooshing sound they make as they
fly by... - Douglas Adams,
On Sun, 15 May 2005 15:37:11 -0400
Eric Cheney [EMAIL PROTECTED] wrote:
Here's the error I get
begin error message**
max# mysql -u root -p
Enter password:
ERROR 2002: Can't connect to local MySQL server through socket
'/tmp/mysql.sock' (2)
cut
So then I did this,
On Sunday, 15 May 2005 at 21:53:01 +0200, [EMAIL PROTECTED] wrote:
On Sun, 15 May 2005 15:37:11 -0400
Eric Cheney [EMAIL PROTECTED] wrote:
Here's the error I get
begin error message**
max# mysql -u root -p
Enter password:
ERROR 2002: Can't connect to local MySQL
Hello,
I have installed FreeBSD 5.4 and configured the X server by using (xorgcfg
-textmode) command.
when i write startx, the X server is started, but where is the kde ?
when i write startkde, i got error message, that needs some configuration!
anyone know how to configure it?
Regards,
On Mon, 16 May 2005, Ian Smith wrote:
Hopefully not too OT .. the only silly question being the unasked one ..
How do I test whether a sh argument is an integer or not, so as to avoid
failing on a syntax error from otherwise working code such as:
[ $3 -lt 10 -o $3 -gt 600 ] echo $0 $1 $2: $3
Zaid Dashti wrote on Sunday 15 May 2005 22:32:
Hello,
I have installed FreeBSD 5.4 and configured the X server by using (xorgcfg
-textmode) command.
when i write startx, the X server is started, but where is the kde ?
when i write startkde, i got error message, that needs some
On Sun, 15 May 2005 16:17:01 -0400
Eric Cheney [EMAIL PROTECTED] wrote:
you have to specifically enable it in /etc/rc.conf :
mysql_enable=YES
it's documented in /usr/local/etc/rc.d/mysql-server.sh
Thank you; that did it! My apologies for not reading the
documentation---but I
On Sun, 15 May 2005 23:32:00 +0300
Zaid Dashti [EMAIL PROTECTED] wrote:
when i write startx, the X server is started, but where is the kde ?
when i write startkde, i got error message, that needs some
configuration!
anyone know how to configure it?
you can try : echo startkde .xinitrc
and
On Sun, 15 May 2005, Mikko Työläjärvi wrote:
On Mon, 16 May 2005, Ian Smith wrote:
How do I test whether a sh argument is an integer or not, so as to avoid
failing on a syntax error from otherwise working code such as:
[ $3 -lt 10 -o $3 -gt 600 ] echo $0 $1 $2: $3 invalid exit 1
Hello all,
I have a small question regarding a DNS issue I am having. I have a bsd box
setup for a domain I am hosting..it has FBSD 5.3 and Bind 9.3. It sits
behind a NAT device and is in a DMZ. The problem is when I setup the domain
I told it to point to the public ip which is translated to
Could nayone please help me configure the virtual
desktop correctly so that the desktop does not go off
of the monitor, and also the mouse does not work
correctly. I would appreciate the help.
___
freebsd-questions@freebsd.org mailing list
On Sun, 15 May 2005 15:51:38 -0700 (PDT)
Paul Klatt [EMAIL PROTECTED] wrote:
Could nayone please help me configure the virtual
desktop correctly so that the desktop does not go off
of the monitor, and also the mouse does not work
correctly. I would appreciate the help.
how did you configure
On 5/15/05, Joe Wood [EMAIL PROTECTED] wrote:
I have a small question regarding a DNS issue I am having. I have a bsd box
setup for a domain I am hosting..it has FBSD 5.3 and Bind 9.3. It sits
behind a NAT device and is in a DMZ. The problem is when I setup the domain
I told it to point to the
Hi,
I'm trying to configure an openldap server on 5.4 and I'm unsure of what the
correct settings in nsswitch.conf should be for a 5.4-Release system, since
the default seems to be different to previous releases.
Perhaps someone here might know?
I've been using the guide at
PR i386/81082
Once again, I don't think the problem is in the build process they used
for making the ISO. As a matter of fact I just yesterday did a 5.4
install
on a system, booting from CD, which I burned from disc1.iso that I
downloaded
from one of the FTP mirrors, on the one machine I
I have just bought one of these printers, and am having trouble getting
it to work with ghostscript. It is connected via a USB port, and it
responds momentarily when I send anything directly to /dev/ulpt0.
I would appreciate the correct parameters for ghostscript - I think it
should work with
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Ted
Mittelstaedt
Sent: Sunday, May 15, 2005 8:07 PM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED] ORG
Cc: [EMAIL PROTECTED]
Subject: RE: 5.4 install disc1 will not find hard drive
You also might consider that
I don't have any more pull getting PR's worked on, but I have found
that if they are properly filed then they get worked on faster. For
example,
the PR system isn't an appropriate place for complaining that a mirror
site
is missing miniinst.iso file - you should contact the mirror
administrator
Allan Bowhill wrote:
Does anyone know how to turn off the annoying beep when
BSD partition selector comes up?
Wish I knew... I could use this as well.
Also, has anyone got a decent setup for a synaptics touchpad
attached to a Dell Inspiron 1150 laptop?
To /boot/device.hints add
Hello,
Does anyone know how to make a PS/2 keyboard work when plugged into a system
booted without a
keyboard on FreeBSD 5.x? It doesn't seem to work.
For example in 4.x the default GENERIC kernel line is:
device atkbd0 at atkbdc? irq 1 flags 0x1
If you leave that line alone, the
Eric Schuele wrote:
Allan Bowhill wrote:
Does anyone know how to turn off the annoying beep when BSD partition
selector comes up?
Wish I knew... I could use this as well.
If I recall correctly the beep comes from the PC BIOS and indicates the
POST passed.My suggestion - unplug the
Hello, I am having a problem in FreeBSD 5.4-RELEASE where all audio is being
played through the mic jack instead of the one it is supposed to. I have
read problems like this before about AC97 audio chips.
I have been able to play MP3 music through this jack, so I know the snd_ich
driver is
-Original Message-
From: fbsd_user [mailto:[EMAIL PROTECTED]
Sent: Sunday, May 15, 2005 6:39 PM
To: Ted Mittelstaedt; [EMAIL PROTECTED] ORG
Subject: RE: 5.4 install disc1 will not find hard drive
There is a 80 pin cable and its good because I tested it in another
pc.
I
I've done a google search, read the freebsd handbook and searched the
mailing list archives...maybe I'm not using the right search terms but I'm
not finding the information I need...or I'm misunderstanding something on a
fundamental level.
I have a 120 gig western digital usb drive with a
I use mainly Fedora and OS X on desktops and OpenBSD on servers (so no
GUI there). I'm trying to play with FreeBSD 5.4 a little and having
trouble with look-and-feel issues. Fonts, menus, and sometimes icons
look a bit ugly. Here are some screenshots:
try to install
/usr/ports/x11-fonts/webfonts
or alternative
/usr/ports/x11-fonts/arkpandora
then enter on of the following lines into X config
FontPath /usr/X11R6/lib/X11/font/webfonts/
or
FontPath /usr/X11R6/lib/X11/font/arkpandora/
Also look at the Modules section into X config.
Hi,
I am trying to create a new kernel to use both the cpus installed in my
Proliant 1600 system. The machine can see both the cpus when it starts
up, but kernel fails to do so.
I am using 5.4-Release. In the kernel configuration file I have this
parameter defined already.
options SMP
Kernel
59 matches
Mail list logo
