On Mon, 19 Jul 2010 16:17:06 -0700
Chuck Swiger cswi...@mac.com wrote:
There's not quite enough information here to identify your
motherboard, but you should make sure there aren't any BIOS upgrades
available for it, as those might help resolve this level of issue.
Check your BIOS config
On Mon, Jul 19, 2010 at 11:09 PM, Bruce Cran br...@cran.org.uk wrote:
On Mon, 19 Jul 2010 16:17:06 -0700
Chuck Swiger cswi...@mac.com wrote:
There's not quite enough information here to identify your
motherboard, but you should make sure there aren't any BIOS upgrades
available for it, as
Markus Hoenicka writes:
Ashish SHUKLA writes:
Can you upload the screenshot of what you're getting ?
Hi,
I've uploaded a screenshot right here:
http://www.abload.de/img/emacs-splashaws1.png
The image shows four incarnations of Emacs. These are, clockwise
starting from upper left:
1)
I had this problem trying to install FreeBSD on my old computer: Cx486DX2 CPU
at 66 MHz; 20 MB RAM; 1.2 GB IDE hard drive; 2x Texel, now Plextor, CD-ROM on
Trantor T130B SCSI (NCR5380 chip; no support in FreeBSD = 3.0); Iomega Zip 250
on same SCSI card. That was in the days of FreeBSD 4.x. No
On Mon, Jul 19, 2010 at 11:04 PM, Adam Vande More amvandem...@gmail.com wrote:
On Mon, Jul 19, 2010 at 3:12 AM, Jim stapleton...@gmail.com wrote:
I was working on an application I've been developing, and I closed the
last instance a bit over 12 hours ago, but some of the sockets are
still
Hi,
Does anyone know what the status of dtrace being able to trace userland
processes is? I see there are few patches out there but am unsure of the
reliability etc.
___
freebsd-questions@freebsd.org mailing list
Dear all,
All my website logs are in /var/log but one user would like to have
access to a custom log specific to his site. Sites are in
/usr/local/v/
How can I make /var/log/custom.log available to him in /usr/local/v/site/logs/?
Does it need a symlink? But will he be able to read the log if it
Hi,
I'm in looking for FreeBSD server for my employer. The server will be
our main server. At the moment we are looking at 'HP proliant ML 150 G6
server' and are keen on hearing about users experience. Any advice or
personal experience on this matter would be most welcomed.
On Tue, Jul 20, 2010 at 01:18:50PM +0200, Zbigniew Szalbot wrote:
Dear all,
All my website logs are in /var/log but one user would like to have
access to a custom log specific to his site. Sites are in
/usr/local/v/
How can I make /var/log/custom.log available to him in
On Tue, 20 Jul 2010 12:03:09 +0100
krad kra...@googlemail.com wrote:
Does anyone know what the status of dtrace being able to trace
userland processes is? I see there are few patches out there but am
unsure of the reliability etc.
Joe Marcus Clarke mar...@freebsd.org writes:
On 7/19/10 9:49 AM, Jerry wrote:
FreeBSD 8.1-PRERELEASE / amd64
Platform Version 4.4.5 (KDE 4.4.5)
I installed nautilus via the /usr/ports/sysutils/eiciel port. I can
start nautilus successfully, however, whenever I right click on a file
or
I am a consultant and was retained by my client to setup qmail or exim
on a VPS running 8.0-STABLE (i386). After setting up the DNS (A record
and MX record) we have been unable to send or receive mail. The client
has/had a working script for installing qmail on 7.1-STABLE but it
seems to not work
On Tue, 20 Jul 2010 09:26:44 -0400
Aryeh M. Friedman aryeh.fried...@gmail.com articulated:
I am a consultant and was retained by my client to setup qmail or exim
on a VPS running 8.0-STABLE (i386). After setting up the DNS (A record
and MX record) we have been unable to send or receive mail.
On Tue, 20 Jul 2010 09:33:28 -0400
Jerry freebsd.u...@seibercom.net wrote:
On Tue, 20 Jul 2010 09:26:44 -0400
Aryeh M. Friedman aryeh.fried...@gmail.com articulated:
I am a consultant and was retained by my client to setup qmail or
exim on a VPS running 8.0-STABLE (i386). After setting up
Assuming you're running apache make the virtualhost directive for the domain
look something like this:
VirtualHost *:80
ServerName domain.com
ServerAlias www.domain.com
DocumentRoot/usr/local/v/site/logs/domain.com/htdocs/
CustomLog
On Tue, 20 Jul 2010 09:46:09 -0400
Aryeh M. Friedman aryeh.fried...@gmail.com articulated:
On Tue, 20 Jul 2010 09:33:28 -0400
Jerry freebsd.u...@seibercom.net wrote:
On Tue, 20 Jul 2010 09:26:44 -0400
Aryeh M. Friedman aryeh.fried...@gmail.com articulated:
I am a consultant and was
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Aryeh M. Friedman wrote:
I am a consultant and was retained by my client to setup qmail or exim
on a VPS running 8.0-STABLE (i386). After setting up the DNS (A record
and MX record) we have been unable to send or receive mail. The client
has/had a
Ok I booted on the 8.0 live CD and pressed Alt-F2 when it gets hung. In verbose
mode it says this:
DEBUG: ioctl(3, TIOCCONC, NULL) = 0 (success)
DEBUG: MADT: Found CPUAPIC ID 1 enabled
DEBUG: MADT: Found CPUAPIC ID 2 enabled
DEBUG: MADT: Found CPUAPIC ID 3 enabled
DEBUG: MADT: Found CPUAPIC ID 4
Disks are not bad. Works with other OSes. Problem is with FreeBSD. I've tried
versions 4.6, 7.2, 8.0 and 9.0. Only FreeBSD 4.6 boots without hanging. I've
not
tried 5 or 6 but I guess I could if it would help to narrow down what the
changes were in those versions. Something obviously changed
On 20 July 2010 13:02, Bruce Cran br...@cran.org.uk wrote:
On Tue, 20 Jul 2010 12:03:09 +0100
krad kra...@googlemail.com wrote:
Does anyone know what the status of dtrace being able to trace
userland processes is? I see there are few patches out there but am
unsure of the reliability
On Mon, Jul 19, 2010 at 12:38 PM, Erik Norgaard norga...@locolomo.org wrote:
On 19/07/10 16.46, alexus wrote:
Use tcpdump, you should see if your rdr/map rules work as expected.
Also,
pfctl -ss and similar.
i don't know how to use tcpdump, can you provide exact syntax so i can
run
it?
On 20/07/10 15.26, Aryeh M. Friedman wrote:
I am a consultant and was retained by my client to setup qmail or exim
on a VPS running 8.0-STABLE (i386). After setting up the DNS (A record
and MX record) we have been unable to send or receive mail. The client
has/had a working script for
alexus wrote:
On Mon, Jul 19, 2010 at 12:38 PM, Erik Norgaard norga...@locolomo.org wrote:
On 19/07/10 16.46, alexus wrote:
Use tcpdump, you should see if your rdr/map rules work as expected.
Also,
pfctl -ss and similar.
i don't know how to use tcpdump, can you provide exact syntax so i can
su-3.2# grep ^firewall /etc/rc.conf
firewall_enable=YES
firewall_type=open
su-3.2# grep ^ip /etc/rc.conf
ipfilter_enable=YES
ipmon_enable=YES
ipnat_enable=YES
ipnat_flags=-d
This is not good.
You are running 2 different firewalls at the same time.
comment out
hello fellas,
can no one give me any ideas ?
I reinstalled libthr.so.3 in the meantime but with no effect.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
Hi folks,
I'm looking at the ezjail.conf file, and it seems like SOME of the
settings might be mandatory, but they're all commented out.
For example, the:
# ezjail_mount_enable=YES
# ezjail_devfs_enable=YES
# ezjail_devfs_ruleset=devfsrules_jail
# ezjail_procfs_enable=YES
#
On 20/07/10 18.02, alexus wrote:
On Mon, Jul 19, 2010 at 12:38 PM, Erik Norgaardnorga...@locolomo.org wrote:
On 19/07/10 16.46, alexus wrote:
Can't help you more, really, you need to investigate where packets are
dropped, tcpdump is a great tool and the man-page is excelent, can't explain
it
On 20/07/10 18.37, alexus wrote:
You are running 2 different firewalls at the same time.
comment out
firewall_enable=YES
firewall_type=open
and reboot your system.
do you know that for a fact or you just guessing??
because first of all it worked before just fine with 2 firewalls
second i
On 07/20/2010 02:42 AM, Thomas Mueller wrote:
I've wondered why FreeBSD installation sets (base, etc, games, comp, man and
others) are broken into pieces of 1392 KB each as opposed to each
installation set in a single .tgz or .tbz (base.tgz, etc.tgz, comp.tgz, and
others: that's how NetBSD
On Tue, 20 Jul 2010 12:29:56 +0800
Aiza aiz...@comclark.com articulated:
This is a news announcement to inform people who have interest in jails,
that a new jail utility is available.
http://sourceforge.net/projects/qjail/
Has a file suitable for the pkg_add command or the port make
On Tue, 20 Jul 2010 18:51:50 +0200, claudiu vasadi wrote:
hello
fellas,
can no one give me any ideas ?
I reinstalled libthr.so.3 in
the meantime but with no effect.
I got it last night and simply
recompiling kdelibs was sufficient:
sudo portupgrade -f kdelibs
Rusty Nejdl
On Tue, Jul 20, 2010 at 4:46 PM, Aryeh M. Friedman
aryeh.fried...@gmail.com wrote:
On Tue, 20 Jul 2010 09:33:28 -0400
Jerry freebsd.u...@seibercom.net wrote:
On Tue, 20 Jul 2010 09:26:44 -0400
Aryeh M. Friedman aryeh.fried...@gmail.com articulated:
I am a consultant and was retained by my
On Tue, Jul 20, 2010 at 09:03:55PM +0300, Odhiambo Washington wrote:
On Tue, Jul 20, 2010 at 4:46 PM, Aryeh M. Friedman
aryeh.fried...@gmail.com wrote:
On Tue, 20 Jul 2010 09:33:28 -0400
Jerry freebsd.u...@seibercom.net wrote:
On Tue, 20 Jul 2010 09:26:44 -0400
Aryeh M. Friedman
On Tue, Jul 20, 2010 at 12:57 PM, Erik Norgaard norga...@locolomo.org wrote:
On 20/07/10 18.02, alexus wrote:
On Mon, Jul 19, 2010 at 12:38 PM, Erik Norgaardnorga...@locolomo.org
wrote:
On 19/07/10 16.46, alexus wrote:
Can't help you more, really, you need to investigate where packets are
On Tue, Jul 20, 2010 at 1:03 PM, Erik Norgaard norga...@locolomo.org wrote:
On 20/07/10 18.37, alexus wrote:
You are running 2 different firewalls at the same time.
comment out
firewall_enable=YES
firewall_type=open
and reboot your system.
do you know that for a fact or you just
alexus wrote:
su-3.2# grep ^firewall /etc/rc.conf
firewall_enable=YES
firewall_type=open
su-3.2# grep ^ip /etc/rc.conf
ipfilter_enable=YES
ipmon_enable=YES
ipnat_enable=YES
ipnat_flags=-d
This is not good.
You are running 2 different firewalls at the same time.
comment out
Jerry wrote:
On Tue, 20 Jul 2010 12:29:56 +0800
Aiza aiz...@comclark.com articulated:
This is a news announcement to inform people who have interest in jails,
that a new jail utility is available.
http://sourceforge.net/projects/qjail/
Has a file suitable for the pkg_add command or the port
Message: 24
Date: Tue, 20 Jul 2010 14:05:13 -0400
From: Jerry McAllister jerr...@msu.edu
Subject: Re: Help with setting up a mail server
To: Odhiambo Washington odhia...@gmail.com
Cc: Aryeh M. Friedman aryeh.fried...@gmail.com,
freebsd-questions@freebsd.org
Message-ID:
Ed Flecko wrote:
Hi folks,
I'm looking at the ezjail.conf file, and it seems like SOME of the
settings might be mandatory, but they're all commented out.
For example, the:
# ezjail_mount_enable=YES
# ezjail_devfs_enable=YES
# ezjail_devfs_ruleset=devfsrules_jail
# ezjail_procfs_enable=YES
#
On Tue, Jul 20, 2010 at 2:16 PM, Aiza aiz...@comclark.com wrote:
alexus wrote:
su-3.2# grep ^firewall /etc/rc.conf
firewall_enable=YES
firewall_type=open
su-3.2# grep ^ip /etc/rc.conf
ipfilter_enable=YES
ipmon_enable=YES
ipnat_enable=YES
ipnat_flags=-d
This is not good.
You
On 20/07/10 20.07, alexus wrote:
On Tue, Jul 20, 2010 at 12:57 PM, Erik Norgaardnorga...@locolomo.org wrote:
plan b is to run natd, but i'd rather run ipnat especially that ipnat
used to work before no problem!
Maybe move away from what used to work and towards what is working :)
Whichever
On 20/07/10 20.43, alexus wrote:
On Tue, Jul 20, 2010 at 2:16 PM, Aizaaiz...@comclark.com wrote:
Just because 2 firewalls at same time didn't blow up in your face before,
sure don't mean they are working correctly. Thats one bad assumption to base
debugging on.
i never had any problem
On Wed, 21 Jul 2010 02:25:32 +0800
Aiza aiz...@comclark.com articulated:
Like the announcement said the port is available at
http://sourceforge.net/projects/qjail/
And if you have ever submitted a new port for inclusion into the freebsd
ports system you would know that it takes months
alexus wrote:
On Tue, Jul 20, 2010 at 2:16 PM, Aiza aiz...@comclark.com wrote:
alexus wrote:
su-3.2# grep ^firewall /etc/rc.conf
firewall_enable=YES
firewall_type=open
su-3.2# grep ^ip /etc/rc.conf
ipfilter_enable=YES
ipmon_enable=YES
ipnat_enable=YES
ipnat_flags=-d
This is not good.
Hello,
I am planning to change my network a little,
I need to put WiFi AP (Dlink Di-524) behind FreeBSD box,
there are 2 nic in this box - one should be for internet (xl0)
and another should use xl1 nic for WiFi AP.
I need to know how to setup routing in FreeBSD box,
could someone help?
And also
Hi--
On Jul 20, 2010, at 12:09 PM, DadAN wrote:
I need to know how to setup routing in FreeBSD box, could someone help?
And also when someone connect via WiFi, I want to get connected to internet.
Now I use 192.168.0.0/24 adresses from WiFi AP dhcp.
There's fine documentation available at:
Jerry wrote:
On Wed, 21 Jul 2010 02:25:32 +0800
Aiza aiz...@comclark.com articulated:
Like the announcement said the port is available at
http://sourceforge.net/projects/qjail/
And if you have ever submitted a new port for inclusion into the freebsd
ports system you would know that it
On 20/07/2010, at 21.09, DadAN dad...@gmail.com wrote:
Hello,
I am planning to change my network a little,
I need to put WiFi AP (Dlink Di-524) behind FreeBSD box,
there are 2 nic in this box - one should be for internet (xl0)
and another should use xl1 nic for WiFi AP.
I need to know
On Tue, Jul 20, 2010 at 2:54 PM, Erik Norgaard norga...@locolomo.org wrote:
On 20/07/10 20.07, alexus wrote:
On Tue, Jul 20, 2010 at 12:57 PM, Erik Norgaardnorga...@locolomo.org
wrote:
plan b is to run natd, but i'd rather run ipnat especially that ipnat
used to work before no problem!
On Wed, 21 Jul 2010 03:45:37 +0800
Aiza aiz...@comclark.com articulated:
There has been the normal pre RELEASE freeze on since xmas, that is why
no port activity is occurring right now.
http://www.freebsd.org/cgi/query-pr.cgi?pr=148777
Date: Tue, 20 Jul 2010 02:47:18 GMT
It was only
On Tue, 20 Jul 2010 21:03:55 +0300
Odhiambo Washington odhia...@gmail.com articulated:
On Tue, Jul 20, 2010 at 4:46 PM, Aryeh M. Friedman
aryeh.fried...@gmail.com wrote:
On Tue, 20 Jul 2010 09:33:28 -0400
Jerry freebsd.u...@seibercom.net wrote:
On Tue, 20 Jul 2010 09:26:44 -0400
Quoting Olivier Nicole olivier.nic...@cs.ait.ac.th:
Hi,
4) Another instance of Emacs on my desktop, this time running in a
terminal. The startup screen is yet another one.
In this one, I clearly recognize emacs being run inside an ascii
terminal. Ascii terminal do not have graphic
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Aiza wrote:
Jerry wrote:
On Wed, 21 Jul 2010 02:25:32 +0800
Aiza aiz...@comclark.com articulated:
Like the announcement said the port is available at
http://sourceforge.net/projects/qjail/
And if you have ever submitted a new port for
Quoting Ashish SHUKLA ash...@freebsd.org:
Can you please provide output of following:
1. xrdb -q|grep '^Emacs' from an terminal running in X11.
[mar...@wutz /usr/home/markus]$ xrdb -q|grep '^Emacs'
Emacs*font: Bitstream Vera Sans Mono-8
2. (display-grayscale-p) in *scratch* buffer in
Any ideas anyone ? I'm stuck. Cannot install FreeBSD on my computer. Every
other
OS besides FreeBSD boots up and installs. What else can I check?
From: Thomas Mueller mueller6...@bellsouth.net
To: freebsd-questions@freebsd.org
Sent: Tue, July 20, 2010
On Tue, 20 Jul 2010 14:59:04 -0700 (PDT)
Rich rl...@pacbell.net wrote:
Any ideas anyone ? I'm stuck. Cannot install FreeBSD on my computer.
Every other OS besides FreeBSD boots up and installs. What else can I
check?
It looks like it's stopping/spinning at the section where it parses the
Hi Ed,
On 7/20/10 12:54 PM, Ed Flecko wrote:
Hi folks,
I'm looking at the ezjail.conf file, and it seems like SOME of the
settings might be mandatory, but they're all commented out.
For example, the:
# ezjail_mount_enable=YES
Uncommenting and setting to NO would disable mounting the
Yes I have, that's not it. It's very frustrating because every CD I can find
boots up except the FreeBSD CD. If it's not a bad drive nobody seems to know
what else it could be. It's deeper than that. Something in the FreeBSD code.
Isn't there a developer somewhere that can tell me what his
Markus Hoenicka writes:
Quoting Ashish SHUKLA ash...@freebsd.org:
Can you please provide output of following:
1. xrdb -q|grep '^Emacs' from an terminal running in X11.
[mar...@wutz /usr/home/markus]$ xrdb -q|grep '^Emacs'
Emacs*font: Bitstream Vera Sans Mono-8
2.
We have received a request to subscribe you to the discussion
c...@phing.tigris.org. If you wish to receive email notifications from this
discussion, please reply to this message.
If not, ignore this email.
___
freebsd-questions@freebsd.org mailing
On Tue, Jul 20, 2010 at 11:50 PM, Jerry freebsd.u...@seibercom.net wrote:
On Tue, 20 Jul 2010 21:03:55 +0300
Odhiambo Washington odhia...@gmail.com articulated:
On Tue, Jul 20, 2010 at 4:46 PM, Aryeh M. Friedman
aryeh.fried...@gmail.com wrote:
On Tue, 20 Jul 2010 09:33:28 -0400
Jerry
61 matches
Mail list logo
