On Monday March 31 2003, Jeff Jirsa wrote (AND Andrew Boothman concurred
with);
apache2 is the newest version, but I'm not sure it supports
all of the modules yet. apache13 is stable and well known,
and you could probably get away with installing that.
Apache13 is in...serving pages and
On Tue, 01 Apr 2003 09:30:04 -0600
Kirk Strauser [EMAIL PROTECTED] wrote:
Hi Kirk, sorry for not replying earlier.
What does the above line do?
/usr/local/bin/spamassassin -F0 -P -x \
-p /home/${user}/.spamassassin/user_prefs |
/usr/local/cyrus/bin/deliver -e -m ${extension}
Hello. I am a beginner with FreeBSD (I have 5.0 DP2) and I compiled a kernel,
starting from the GENERIC configuration file. Didn't change anything in the ata
section, except I took out the tape device and the ATA_STATIC_ID (as a last thing when
I didn't know what to do anymore). The
Hi Florin
My guess (but I am also fairly new to FBSD) is that the jumpers on the master
drive are set so that it reports a slave being present, when there isn't one.
If you have a look at the jumper settings on the master then perhaps you can
resolve this.
Hopefully someone slightly more
From man ppp I see this:
The -unit flag tells ppp to only attempt to open /dev/tunN.
I want it to use tun0. I can't see a way to specify a unit in
/etc/rc.conf.
Clues?
--
Dan Langille : http://www.langille.org/
___
[EMAIL PROTECTED] mailing list
IMHO, cygwin is a better solution. I really liked the 'expanded'
desktop you get with Hummingbird, but it always crashed on me.
L
On 04/02/03 09:28 AM, CARTER Anthony sat at the `puter and typed:
Or HummingBirds Exceed, very good but it costs...
Anthony
On Friday 28 March 2003 20:22,
At 2003-04-02T08:45:08Z, Miguel Mendez [EMAIL PROTECTED] writes:
The -F0 option was an option that made spamassassin not alter the headers,
as it would confuse some programs. It's not needed since 2.44
iirc.
Gotcha.
Because spamassassin is being ran as user cyrus, you need to tell it where
On 04/02/03 09:27 AM, Kirk Strauser sat at the `puter and typed:
At 2003-04-02T08:45:08Z, Miguel Mendez [EMAIL PROTECTED] writes:
The -F0 option was an option that made spamassassin not alter the headers,
as it would confuse some programs. It's not needed since 2.44
iirc.
Gotcha.
I have an old tape
ast0: TAPE HP COLORADO 5GB at ata0-slave PIO4
But I am having that problem when I try to make backup of my system. It
seems a problem with ata0?
ast0: WEOF command timeout - resetting
ata0: resetting devices ..
acd0: removed from configuration
ast0: removed from
In [EMAIL PROTECTED], Konrad Scorciapino [EMAIL PROTECTED] typed:
Whichever one you want. They should all work. you probably don't need
the x11 port, so one of the two -nox11 versions. One is licensed with
GNU, one with an open source license that permits commercial reuse if
you pay a
Does anyone know how to configure this.
I have installed the card and connected to my switch. have noticed I now
have interfaces
inphy0: i82555 10/100 media interface on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
inphy1: i82555 10/100 media interface on miibus1
ok, that was dumb, the inphy0 doesnt relate to the gig-e card...do I need
to activate something in the kernel to support?
Does anyone know how to configure this.
I have installed the card and connected to my switch. have noticed I
now
have interfaces
inphy0: i82555 10/100 media
arp: 192.168.0.2 is on lo0 but got reply from 00:d0:b7:b7:66:eb on fxp1
Hi, how do I stop this line from appearing 50,000,000 times per day in my
DMESG output. I am sure it has something to do with the two nics I am
running on this box.
**
fxp0:
i posted a message earlier, unfortunately, i received no responses. so i
guess i'll ask a different question.
i've moved my HD from one system to another.
is it possible to rebuild the MBR? i'm booting from a promise controller.
initially i was booting from the primary controller but now i'm
On Tue, Apr 01, 2003 at 10:27:13PM -0600, David Jobes wrote:
i am running freebsd 5.0, when i look at or run the dmesg command i get the
following
snip
6 hw RW Node
1 machine R *Handler String
2 model R *Handler String
3 ncpu R *Handler Int
4 byteorder R *Handler Int
5
--- Dan Nelson [EMAIL PROTECTED] wrote:
In the last episode (Apr 02), W. J. Williams said:
arp: 192.168.0.2 is on lo0 but got reply from 00:d0:b7:b7:66:eb on
fxp1
Hi, how do I stop this line from appearing 50,000,000 times per day
in my DMESG output. I am sure it has something to do
Here's the history:
I installed a Promise TX2000 IDE RAID along with 2 drives. Booted into the BIOS of the
TX2000 and defined a RAID-1 array using both drives.
Then, due to circumstances, I had to take out the card and replace it with a plain IDE
controller (Promise Ultra 100).
Now when I
God, I need to learn to read before I send...my kernel is recompiling
right now with the lge device (already had the miibus device)...will see
how this works then...two minutes later...yes it works now...still sending
hoping it might benefit someone else...
Will
--- W. J. Williams [EMAIL
On Tue, Apr 01, 2003 at 10:17:52PM +0200, Marcel Stangenberger wrote:
It shows me the zonefile from my server
so far so good, bind seems to be working. what command did your
issue so that you think you can't resolve your zone entries
localy?
the fact that when i try to resolve a name with
--- Dan Nelson [EMAIL PROTECTED] wrote:
In the last episode (Apr 02), W. J. Williams said:
--- Dan Nelson [EMAIL PROTECTED] wrote:
In the last episode (Apr 02), W. J. Williams said:
arp: 192.168.0.2 is on lo0 but got reply from 00:d0:b7:b7:66:eb on
fxp1
Hi, how do I stop this
In [EMAIL PROTECTED], Eduardo Viruena [EMAIL PROTECTED] typed:
I just blew the label of my disk.
I do not know how I did it but you know that
we can make amazing things without even be aware
of what we are doing.
I have a paper on my desk where I write down
the sizes of my
In [EMAIL PROTECTED], Florin Betivoiu [EMAIL PROTECTED] typed:
Hello. I am a beginner with FreeBSD (I have 5.0 DP2) and I
Two generic comments. First, that's an old version of a
not-suitable-for-production system - see URL:
http://www.mired.org:8080/5.0-not-production.html for more
Hi,i have a question regarding the IP Alias. If i bind my interface to 2
ip addresses say
1) ifconfig xl0 add w.x.y.z netmask 255.255.255.0
2) ifconfig xl0 add p.q.r.s netmask 255.255.0.0
Is there a way that i can force the packets coming-out of
Submitter-Id: current-users
Originator:Joshua Coombs
Organization: x386.net
Confidential: no
Synopsis: ips.evil counter fails to incriment
Severity: serious
Priority: medium
Category: standards
Class: sw-bug
Release: FreeBSD 4.7-RELEASE-p10 i386
I am trying to installworld after a successful cvsup of RELENG_4 and
buildworld. I continuously get:
install -o root -g wheel -m 444 boot2 /boot/boot2
install: boot2: No such file or directory
*** Error code 71
I have searched google and others, and all state to check if the directory
exists:
Under linux, it is not difficult to accomplish this:
# ip link set dev $DEV up
# ip addr add dev $DEV w.x.y.z/24
# ip addr add dev $DEV p.q.r.s/16
# ip route add $DESTINATION via $GATEWAY src p.q.r.s
If an application requests the use of IP address w.x.y.z, there is no way
for the routing code
you could also try running tcpump(1) while trying to resolve
names. try sniffing on all interfaces, so you can tell where your
name service queries are going to.
ok i found the trouble, i made a stupid error when configuring the
firewall, i forgot to add the servers to which the DNS is
At 2003-04-02T08:45:08Z, Miguel Mendez [EMAIL PROTECTED] writes:
http://www.cyrusoft.com/sieve/ is a good starter, specially the provided
samples. Have a look at them and you'll figure out most of the stuff.
Quick OT question: how do you debug a sieve script? I uploaded a very
simple script
I am wondering if there is a way to setup a server using FreeBSD4.7 and
after I have it configured to my liking, can I clone it then put the
image on a system that has completly different hardware? Is it the 'dd'
command I need to research for this or is there some other way?
Thanks for any help
Hi !
I was wondering if it was possible to just rebuild one module in FreeBSD.
Indeed, I'm trying several patches on the emu10k1 module and each time I apply
the patch I have to recompile all the kernel+modules to use the new module.
I am sure there's a way to only compile the emu10k1 module,
I'm trying to install FreeBSD 4.7-RELEASE on a dual CPU Compaq
DL380 G1. It hangs on boot. Does anyone have a clues how to
fix this?
Here's the output from booting with -v
SMAP type=01 base= len= 00096c00
SMAP type=02 base= 00096c00 len= fffe9400
In [EMAIL PROTECTED], Antoine Jacoutot [EMAIL PROTECTED] typed:
Hi !
I was wondering if it was possible to just rebuild one module in FreeBSD.
Indeed, I'm trying several patches on the emu10k1 module and each time I apply
the patch I have to recompile all the kernel+modules to use the new
On Wednesday 02 April 2003 20:23, Mike Meyer wrote:
Well, what are you doing now to build the kernel? You should be able
to use the classic kernel build method, except you don't have to
repeat any of the steps but make.
What I am doing is
$ cd /usr/src
$ make buildkernel KERNCONF=MY_CONF
$
Just got a Crucial USB CompactFlash reader. I plugged the CF card into it,
plugged the cable into the reader, and tried to mount it:
$ sudo mount -t msdos /dev/da0s1 /mnt
Password:
msdos: /dev/da0s1: Device not configured
dmesg gives me this:
umass0: USB Mass Storage, rev 1.10/1.13, addr 3
Hi, I'm new to FreeBSD and enjoying it... I used an off-the-shelf 4.6
release to get started, and then decided to cvsup and get up to stable.
I only have dialup service, so seeing a copy of the CVS Repository on disk
#2, I followed the instructions there to populate the cvs source
directories...
Hi,
I am going to set up a RAID 0 array with two 250G drives, making 500G.
Which newfs parameters would you recommend for it?
I am afraid of ending up with a fs with Gigs of space and no inodes
left, or a fs that is heavily fragmented and slow.
Reading the newfs manpage didn't quit help me, it
On Wed, Apr 02, 2003 at 11:26:19AM -0500, Eric Ekong wrote:
I added memory to my machine yesterday and since then I have noticed
Fatal traps when I try to do some intensive activity on the machine.
IE. make buildworld
That's a classic sign of faulty memory. I had the same thing when I
I have multiple network interfaces in my machine, and don't want X to
listen on the internet facing NIC.
Is
I was wondering if any gamer had tried to use Linux emulation to run
the Neverwinter Nights Linux Beta Client under 4.7-RELEASE?
Reports here of people who have gotten it running.
http://nwn.bioware.com/forums/viewtopic.html?topic=203141forum=72sp=15
(I'm going to have to try too! :)
John
Hi,
I'm trying to use EclipseBSD for real-time scheduling research.
Unfortunately, the current EclipseBSD (I guess it is also the latest
version)
requires FreeBSD 3.4-RELEASE, which I can't find anywhere.
Every one seems pushing for 4.x or 5.x.
Could anybody point me where to download FreeBSD
Greetings,
I would like to install bsd onto a machine with a large disk and no network. the
question i have is can i install items from source if i have all the cds? Do the
cds have both the packages and the src on them? I was thinking i could just copy
each cd to /usr/local/cdx/.
thanks,
brian
Hi All,
I have a problem with MySQL software. I lost the file mysql.sock on my
system. Could some one tell me how to recover this file or how I generate
this file?
Thank you for your help and have a nice day
Ulrich
Ulrich Schrems
On Wed, Apr 02, 2003 at 08:35:15PM +0200, Antoine Jacoutot wrote:
On Wednesday 02 April 2003 20:23, Mike Meyer wrote:
Well, what are you doing now to build the kernel? You should be able
to use the classic kernel build method, except you don't have to
repeat any of the steps but make.
Peng Li wrote:
I'm trying to use EclipseBSD for real-time scheduling research.
FWIW, I tried to do some experiments with Eclipse back when 3.4 was
still relatively current, and could never get it to work (forgot the
details, sorry.)
Unfortunately, the current EclipseBSD (I guess it is also the
David Gerard [EMAIL PROTECTED] writes:
Just got a Crucial USB CompactFlash reader. I plugged the CF card into it,
plugged the cable into the reader, and tried to mount it:
$ sudo mount -t msdos /dev/da0s1 /mnt
Password:
msdos: /dev/da0s1: Device not configured
dmesg gives me this:
In [EMAIL PROTECTED], Antoine Jacoutot [EMAIL PROTECTED] typed:
On Wednesday 02 April 2003 20:23, Mike Meyer wrote:
Well, what are you doing now to build the kernel? You should be able
to use the classic kernel build method, except you don't have to
repeat any of the steps but make.
What
On Wed, Apr 02, 2003 at 11:45:24AM -0800, Ulrich Schrems wrote:
Hi All,
I have a problem with MySQL software. I lost the file mysql.sock on my
system. Could some one tell me how to recover this file or how I generate
this file?
Does restarting MySQL recreate it ?
Ceri
--
In [EMAIL PROTECTED], E. J. Cerejo [EMAIL PROTECTED] typed:
I'm trying vnc to excess my fbsd machine from a windows machine but I
can only get X running twm with vnc, is there a way to get blackbox in
vnc instead of twm?
vnc runs the script ~/.vnc/xstartup to start the desktop. If it
doesn't
On Wednesday 02 April 2003 21:49, Scott Mitchell wrote:
# make buildkernel -DNOCLEAN KERNCONF=MY_CONF
or you could just:
# cd /sys/modules/sound/driver/emu10k1
# make install
If you're careful about what's using the driver you can probably get away
with just unloading and reloading the
I know that part. Here's a copy of what it looks like:
[ -r $HOME/.Xresources ] xrdb $HOME/.Xresources
xsetroot -solid grey
xterm -geometry 80x24+10+10 -ls -title $VNCDESKTOP Desktop
blackbox
I still get twm! What am I doing wrong?
[EMAIL PROTECTED] wrote:
In [EMAIL PROTECTED], E. J. Cerejo
On Wed, 02 Apr 2003 at 12:45:46 -0600, Curt Grimley wrote:
Hi, I'm new to FreeBSD and enjoying it... I used an off-the-shelf 4.6
release to get started, and then decided to cvsup and get up to
stable.
I only have dialup service, so seeing a copy of the CVS Repository
on disk #2, I followed
On Wed, Apr 02, 2003 at 12:45:46PM -0600, Curt Grimley wrote:
I only have dialup service, so seeing a copy of the CVS Repository on disk
#2, I followed the instructions there to populate the cvs source
directories... there were tar files that dropped in a lot of ,v files. (No
actual source
On Wed, Apr 02, 2003 at 01:40:51PM -0600, Brian Henning wrote:
Greetings,
I would like to install bsd onto a machine with a large disk and no network. the
question i have is can i install items from source if i have all the cds? Do the
cds have both the packages and the src on them? I was
On Wednesday 02 April 2003 22:06, Mike Meyer wrote:
That's the way to rebuild new sources. Try:
$ cd /usr/src/sys/i386/conf
$ config MY_CONF
$ cd ../../compile/MY_CONF
$ make depend
$ make
$ make install
Man, I didn't know that. Thanks a lot !
Antoine
Hi,
I have a server on a network which is inhabited by an Intel rack-mount
box running Win2k. The Intel server has got two of it's NIC's 'teamed'
- the Intel redundant NIC method.
Problem is that to the FreeBSD box, it looks like the MAC address of
that IP address keeps changing, so I get
Avleen Vig wrote:
I have multiple network interfaces in my machine, and don't want X to
listen on the internet facing NIC.
Brian McCann wrote:
Hi all. I'm having an issue with security while trying to get natd to
work with ipfw. I got my ipfw rules working great, so I added the natd
line in:
ipfw add divert 8668 all from any to any via $EXTERNAL_INTERFACE
But I can't do anything (ping, fetch, etc) until I add:
Bsd Neophyte wrote:
i posted a message earlier, unfortunately, i received no responses. so i
guess i'll ask a different question.
i've moved my HD from one system to another.
is it possible to rebuild the MBR? i'm booting from a promise controller.
initially i was booting from the primary
David Olbersen wrote:
Here's the history:
I installed a Promise TX2000 IDE RAID along with 2 drives. Booted into the BIOS of the TX2000 and defined a RAID-1 array using both drives.
Then, due to circumstances, I had to take out the card and replace it with a plain IDE controller (Promise Ultra
Hi,
I've been trying to install the X 4.3.0 Port on a full install of FreeBSD 5
Release. In regards to my attempts at installing, I've got several questions.
1. By default, the initial full install puts XFree86 4.2.0 on the system.
How do I properly overwrite/uninstall this so that 4.3.0 can
At 04:51 PM 4/2/2003, you wrote:
Hi,
I've been trying to install the X 4.3.0 Port on a full install of FreeBSD 5
Release. In regards to my attempts at installing, I've got several questions.
1. By default, the initial full install puts XFree86 4.2.0 on the system.
How do I properly
Dear Sirs.
I did not count the postings I wrote to this group, it seems, in respect to the
answers,
that really few people have DAT changers or a similar problem like me.
The problem I wish to describe is really serious to us and it hits two newer HP DDS4
tape
drive units, one single drive and
On Wednesday 02 April 2003 20:20, David Muir Sharnoff wrote:
I'm trying to install FreeBSD 4.7-RELEASE on a dual CPU Compaq
DL380 G1. It hangs on boot. Does anyone have a clues how to
fix this?
Programming 35 pins in IOAPIC #0
IOAPIC #0 intpin 2 - irq 0
SMP: CPU0 apic_initialize():
* On Wednesday 02 April 2003, Patrick O'Reilly wrote:
* ...
* Hmmm. I had the same thing on a similar platform once I built the kernel with
* SMP. Also curious, though I have reverted to a non-SMP kernel for now while
* I get everything else set up.
I guess I should mention that I'm trying
Jon Reynolds wrote:
I am wondering if there is a way to setup a server using FreeBSD4.7 and
after I have it configured to my liking, can I clone it then put the
image on a system that has completly different hardware? Is it the 'dd'
command I need to research for this or is there some other way?
Good day !
Anybody tried to connect from Linux to VPN server based on mpd (FreeBSD
4.7)
From Windows 98, Windows 2000 and FreeBSD (mpd as client) - no trouble
but from Linux (2.4.19 with MPPE support ) - no chance -
pptp client always gets -
Unsupported protocol
Konrad Scorciapino wrote:
Hi,
Look in /var/db/mysql/ and look for the error logs.
I think they are labeled hostname.err.
They should tell you what is wrong.
Hmmm... The problems started when I deleted the mysql database... Now I've
fixed it
I've deleted the database as a regular user, as
I had the same problem too. I could not get it to work with blackbox. Try fluxbox out.
It is blackbox clone.
On Wed, 02 Apr 2003 15:56:19 -0500
E. J. Cerejo [EMAIL PROTECTED] wrote:
I know that part. Here's a copy of what it looks like:
[ -r $HOME/.Xresources ] xrdb $HOME/.Xresources
In discussion on -stable, people have been trying to help me with a sendmail
issue. The effect is for sendmail to refuse to start, no matter what, and I
cannot use the Internet from that box.
(I am using webmail and Windoze - sob - to send this message)
One problem is that the version of
On 2003-04-03 10:55, [EMAIL PROTECTED] wrote:
In discussion on -stable, people have been trying to help me with a
sendmail issue. The effect is for sendmail to refuse to start, no
matter what, and I cannot use the Internet from that box. (I am using
webmail and Windoze - sob - to send this
On Monday 31 March 2003 08:19 pm, [EMAIL PROTECTED] wrote:
Hello,
I bought FreeBSD 4.6 OS which includes 4 discs and FreeBSD Toolkit (March
2002) which includes 6 discs and 'The FreeBSD HANDBOOK' 2nd Edition
[WindRiver] ; all of this from BSDmall website in Augest 2002 and they ship
it to
On Wed, Apr 02, 2003 at 08:57:48PM -0500, Dragoncrest wrote:
I've got a bit of a technical question about doing scripts. I've
created a script that I use for expediting changes to one of my servers to
save me a large number or repetitive steps that I have to do. My question
is
On Wednesday 02 April 2003 12:28 pm, Steve Bertrand wrote:
I am trying to installworld after a successful cvsup of RELENG_4 and
buildworld. I continuously get:
Then you should ask on -stable mailing list.
Tim
___
[EMAIL PROTECTED] mailing list
Quoting David Muir Sharnoff [EMAIL PROTECTED]:
* On Wednesday 02 April 2003, Patrick O'Reilly wrote:
* ...
* Hmmm. I had the same thing on a similar platform once I built the kernel
with
* SMP. Also curious, though I have reverted to a non-SMP kernel for now
while
* I get everything
Ok, I'm sure I'm missing something really simple and obvious here, but
I'm stuck.
I have two firewalls - the second is being prepped to replace the
first. All networking from the second machine appears to be fine
*except* traceroute looks broken. This happens:
(machine that works)
mr2fw2#
Hello,
My question was how can one install more distribution from the root directory
when the first initial installation was only the required \bin distribution. if now I
want to install the games port or distribution how can I install it. Firstly, I do not
have this games port
My question was how can one install more distribution from the
root directory when the first initial installation was only the
required \bin distribution. if now I want to install the games port or
distribution how can I install it. Firstly, I do not have this games
port
[EMAIL PROTECTED] wrote:
In [EMAIL PROTECTED], E. J. Cerejo [EMAIL PROTECTED] typed:
I'm trying vnc to excess my fbsd machine from a windows machine but I
can only get X running twm with vnc, is there a way to get blackbox in
vnc instead of twm?
vnc runs the script
Hi,
I had a bit of a problem with the new openoffice 1.0.2. It stops out with the
following:
=== Installing for openoffice-1.0.2_2
=== openoffice-1.0.2_2 depends on file: /usr/local/bin/perl5.6.1 - found
#
# UGLY hack to not have to specify a X-Display.
#
/usr/X11R6/bin/Xvfb :1001 -screen 0
- Original Message -
From: Dan Langille [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, April 02, 2003 8:12 AM
Subject: How do I specify a unit for ppp?
From man ppp I see this:
The -unit flag tells ppp to only attempt to open /dev/tunN.
I want it to use tun0. I can't
Hi All,
Does FreeBSD have any support for loopback filesystems. i.e. I mean being
able to mount a file as a filesystem ala Linux. Googling didn't chuck back
much and the nearest I found was mount_null. Is it possible?
Rgds
Rus
--
www: http://www.65535.net | More bits for your byte
From: Rus Foster [EMAIL PROTECTED]
Hi All,
Does FreeBSD have any support for loopback filesystems. i.e. I mean being
able to mount a file as a filesystem ala Linux. Googling didn't chuck back
much and the nearest I found was mount_null. Is it possible?
man vn
man vnconfig
/dev/vn*
e.g.:
#
Hi,
I am repeating the post below, because it obviously hasn't made it to
the list (at least i did not get it back from the list).
Can someone please give me some advice, because i will be setting up the
discs today.
Thank you
Hi,
I am going to set up a RAID 0 array with two 250G drives,
http://www.freebsd.org/cgi/getmsg.cgi?fetch=328514+332780+/usr/local/www/db/text/2003/freebsd-current/20030323.freebsd-current
I am trying to install FReeBSD 5 on an inspiron 2500. Everytime I try
to install it hangs after loading the kernel. I have looked into it and
it seems that there is
On Wed, Apr 02, 2003 at 08:19:24AM -0800, Bsd Neophyte wrote:
i posted a message earlier, unfortunately, i received no responses. so i
guess i'll ask a different question.
i've moved my HD from one system to another.
is it possible to rebuild the MBR? i'm booting from a promise
Sr. Alberto Francisco:
Si lo que usted quiere es adquirir el software y un buen libro con el mismo
dirijase a la siguiente dirección Web:
http://www.freebsdmall.com/cgi-bin/fm
Tambien puede conseguir el software completo de forma gratuita obteniendolo
directamente de la siguiente dirección
Subject says most of it.
I've got a client with HUGE data archive requirements.
Does anyone have 4-STABLE burning DVDs? If so, how are
you doing it (just mkisofs?) and what make/model of DVD
burner works?
Thanks in advance for information.
--
Bill Moran
Potential Technologies
Hi. I am now trying to run mod_php4 under apache2.
but alas, it moans and nags during installation;
{ (/usr/ports/www/mod_php4) }-
$ make -DWITH_APACHE2
=== mod_php4-4.3.1 depends on file: /usr/local/sbin/apxs - found
=== mod_php4-4.3.1 depends on file:
I added memory to my machine yesterday and since then I have noticed
Fatal traps when I try to do some intensive activity on the machine.
IE. make buildworld
Motherboard: Asus A7N266-E
Memory: 1.5G
Vid: Matrox G550
Kernel options
options MAXMEM=(1536*1024)
Top Half of boot
On 2 Apr 2003 at 8:29, Matthew Emmerton wrote:
- Original Message -
From: Dan Langille [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, April 02, 2003 8:12 AM
Subject: How do I specify a unit for ppp?
From man ppp I see this:
The -unit flag tells ppp to only
I am trying to install FReeBSD 5 on an inspiron 2500. Everytime I try to
install it hangs after loading the kernel. I have looked into it and it seems
that there is a problem with the default kernel and the devices on the laptop
(sound card I believe)...
How can I go about installing
In the last episode (Apr 02), W. J. Williams said:
arp: 192.168.0.2 is on lo0 but got reply from 00:d0:b7:b7:66:eb on fxp1
Hi, how do I stop this line from appearing 50,000,000 times per day
in my DMESG output. I am sure it has something to do with the two
nics I am running on this box.
Hi All,
I'm having trouble getting IMAP/SSL working. I've installed courier imap.
Run /usr/local/share/courier-imap/mkimapdcert, edit the config and put
IMPADSSLSTART=YES but I'm still not seeing anything and TBH I can't see
anything in the logs. can someone point me in the right direction?
Rgds
Hi there,
Iám trying to configure a dns bind by editing the named.conf like
this:
zone ip6.ipg.pt {
type master;
file ip6.ipg.pt.db;
check-names fail;
allow-update { none; };
allow-transfer { any; };
allow-query { any; };
also-notify { };
};
zone
In the last episode (Apr 02), W. J. Williams said:
--- Dan Nelson [EMAIL PROTECTED] wrote:
In the last episode (Apr 02), W. J. Williams said:
arp: 192.168.0.2 is on lo0 but got reply from 00:d0:b7:b7:66:eb on fxp1
Hi, how do I stop this line from appearing 50,000,000 times per day
Necesito Montar un Servidor a traves de internet, y he
oído maravillas sobre su sistema operativo, por lo
cual quisiera saber como comprar la distribución
completa de este sistema operativo unix
___
Yahoo! Messenger - Nueva versión GRATIS
Super
Necesito Montar un Servidor a traves de internet, y he
oído maravillas sobre su sistema operativo, por lo
cual quisiera saber como comprar la distribución
completa de este sistema operativo unix
___
Yahoo! Messenger - Nueva versión GRATIS
Super
On Tuesday 01 April 2003 07:40 am, Rus Foster wrote:
Hi All,
I've got a few minutes going spare so I thought that I would try and see
if it is possible to bootstrap a chroot-ed debian install under 4.7. Has
anyone tried this before with any luck or is this just going to be a
learning
98 matches
Mail list logo
