Sorry for not specifying, but i'm runnning 5.4-STABLE.
It was updated some time ago from 5.3-STABLE.
And while doing these updates a good deal of my ports
have been rebuilt. I have tried rebuilding glib and
all of it's dependancies too, but to no avail.
While the problem hasn't gone away,
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Philip
Hallstrom
Sent: Thursday, June 09, 2005 10:38 AM
To: freebsd-questions@freebsd.org
Subject: Outsourcing a modem pool for dialup? Any advice?
Hi all -
Our company has a product such that a small
On 6/9/05, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Dmitry,
Both situations have the same result, an Slave IDE HDD on primary
controller, or a master HDD on the 2nd IDE controler, works much more
slow, testing with 'dd'.
I couldn't see that with diskinfo.
I can't
On 6/10/05, Keyser [EMAIL PROTECTED] wrote:
Do you have any locale environment variables set? The program runs
fine on my machine.
--
Dan Nelson
I don't think so? This is a completely fresh install of FreeBSD 5.4.
Haven't made any changes. Maybe I need to change something?
Hy,
I'm running FreeBSD 4.11 on a Compaq CL-380 Server. It has an internal Smart
Array Controller from which I successfully boot the system, and an AIT-50
tape drive which I intended to use for backups. Also the externel
RAID-Controller works fine.
Unfortunately I'm unable to get this tape
Hi all,
I am currently running ipfw from FreeBSD-5.3-RELEASE on my box. The box passes
GRE packets from the external to the internal network. We run Microsoft RDP
over PPTP through the firewall. After upgrading to FreeBSD 5.3, we realised
that the RDP connections never get initiated. When I
On Thursday 09 June 2005 23:09, Remington L wrote:
Correction, sorry for the previously post(I'm at work). The problem lies
with the Intel VBIOS not reporting the correct resolution to Xorg. As a
workaround you need to modify the VBIOS and use an updated i810 driver.
Here is the Xorg i810
Denis Lemire wrote:
I would like to setup Heimdal Kerberos and use OpenLDAP to store its database.
Too my knowledge the kerberos installation in the base of FreeBSD 5.4
does not support LDAP. I could install from ports but then I end up
with two kerberos installations which is sure to give me a
On Thu, Jun 09, 2005 at 11:17:24PM -0700, Cristian Sirbu wrote:
Sorry for not specifying, but i'm runnning 5.4-STABLE.
It was updated some time ago from 5.3-STABLE.
And while doing these updates a good deal of my ports
have been rebuilt. I have tried rebuilding glib and
all of it's
I folks,
when i try to install aide from security/aide i've got this output:
=== aide-0.10_1 is marked as broken: Incomplete pkg-plist.
=== Cleaning for libiconv-1.9.2_1
=== Cleaning for bison-1.75_2
=== Cleaning for gettext-0.14.4_1
=== Cleaning for gmake-3.80_2
=== Cleaning for
Again for the archives, I got out of the installworld mess caused by
an unknown error relatively simply. Booting into single mode was a
no-goer, but booting up with the 5.4-RELEASE CD and selecting Upgrade
existing system in the sysinstall menu was.
I selected the minimal User option (binaries
On 2005-06-09 19:26, Denny White [EMAIL PROTECTED] wrote:
On Fri, 10 Jun 2005, Giorgos Keramidas wrote:
Is there any particular reason why you are trying to build the web
site?
More importantly, why do you have to build the web site as root?
The files are installed in ${DESTDIR}, which
hi,
i'm having problems trying to install mysql41-server from ports since
4.1.12 was made available, using freebsd 4.11:
//
[11:06:51] [EMAIL PROTECTED]:/usr/ports/databases/mysql41-server] # make
install clean
snip
Making all in client
source='mysql.cc' object='mysql.o' libtool=no
Alec,
You may want to investigate SpamCop. [...]
Lane,
I vote for SpamCop, too! [...]
Olivier,
Spamcop is a solution, but avoid any automatic tool, as SpamAssassin
can also make mistakes and classify a valid message as spam.
Thank you for your advices. I'll try SpamCop, in manually mode to
Has anyone gotten this problem with a webapp before using gettext and
does anyone have any suggestions.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
Has anyone gotten this problem with gettext before and if so any
suggestions for resolution ?
Freebsd 5.3 , PHP5.
Fatal error: Call to undefined function: bindtextdomain()
in /usr/local/www/data-dist/
___
freebsd-questions@freebsd.org mailing list
# Vulpes Velox:
Jon Mercer [EMAIL PROTECTED] wrote:
[ graphics tablet and FreeBSD? ]
Only restriction is that it has to be relatively recent (i.e. still
in the shops) and most of the functionality should work. PS2 or USB
doen't matter.
[...]
Not sure about tablets. You may want to check
# Andreas Davour:
How come my xmodmap isn't working.
It has been obsoleted, I think.
Is there another way to remap the keyboard if you're using Xorg?
Yes, see URL:http://x.org/X11R6.8.2/doc/XKB-Enhancing.html.
A: Because it fouls the order in which people normally read text.
Q: Why is
When I leave my web browser (Firefox) open on my desktop looking at a
page that should refresh every couple of minutes until a process
completes, things will simply quit updating after some time passes.
Sometimes it's only a few minutes, sometimes its several hours, but when
I come back to the
Hi,
I've got a strange problem with recording on my system. The problem appears to
have started since I upgraded my 5.4-Release system today to 5.4p2.
I'm using a Vibra128 soundcard have the following devices:
daemon:~ % ll /dev/dsp*
crw-rw-rw- 1 root wheel 30, 3 Jun 10 20:12 /dev/dsp0.0
# Riccardo Giuntoli:
=== aide-0.10_1 is marked as broken: Incomplete pkg-plist.
[...]
Why?
Well, because it's pkg-plist is incomplete. ;)
Afaict, the pkg-plist is used to make pkg_delete
(or make deinstall) remove all files the port
installed. If it's incomplete, some files are
left behind.
Hi people
I have installed a 5.3 STABLE box with automount(amd) daemon working
perfectly with the defaults flags(/net /host) and the nfs server
exporting only my home. all this work but then i upgrade my system
to 5.4 and problems began
my exports in (draco my machine) said
/usr/home/
Am Freitag, 10. Juni 2005 09:51 schrieb Osmany Guirola Cruz:
Hi people
I have installed a 5.3 STABLE box with automount(amd) daemon working
perfectly with the defaults flags(/net /host) and the nfs server
exporting only my home. all this work but then i upgrade my system
to 5.4 and
i'm having problems trying to install mysql41-server from ports since
4.1.12 was made available, using freebsd 4.11:
//
[11:06:51] [EMAIL PROTECTED]:/usr/ports/databases/mysql41-server] # make
install clean
snip
Making all in client
source='mysql.cc' object='mysql.o' libtool=no
Does FreeBSD, Xorg or the Window Managers have support for more than
one Monitor, and if so how would I enable that feature?
Can I use IPv6 Protocol with FreeBSD on my internal network if I
wanted to?
_
Express
I am using -stable and i do the upgrade via CTM
in the freebsd site the last ctm is src-5.0393.gz 06/09/05
i hope that with this was sufficient to solve the problem ;-)
this are the affected file with the ctm file 92 and 93
FS .ctm_status
FN contrib/tcpdump/print-bgp.c
FN
Matthew Jordan wrote:
Does FreeBSD, Xorg or the Window Managers have support for more than
one Monitor, and if so how would I enable that feature?
X.org supports this feature. I can offer a sample configuration that
works for me:
# Matthew Jordan:
Does FreeBSD, Xorg or the Window Managers have support for more than
one Monitor, and if so how would I enable that feature?
There are multiple ways to do this, i.e. xinerama. Try googling
for multiple monitors xorg or something like that.
If you use the nVidia-driver
Steven Friedrich [EMAIL PROTECTED] wrote:
If I'm burning an iso image, do I need to use SAO (DAO) instead of TAO?
Ted Mittelstaedt [EMAIL PROTECTED] wrote:
Yes, use DAO. But the software should know that since it's an ISO to
do that automatically. An ISO image on a multisession CD would be
Steven Friedrich [EMAIL PROTECTED] wrote:
On Monday 06 June 2005 01:16 am, Ted Mittelstaedt wrote:
So the next step is trying to substitute a different vendor's burner in
the FreeBSD
system. If it gives you the same errors, the problem is most likely not
in the
burner, and most likely
Dear Sirs,
I tried to investigate supplied tomcat50ctl script, but I couldn't find
where I add -Djava.awt.headless=true to java machine command line
options. Can anyone help me ?
Cheers,
Ilia Chipitsine
___
freebsd-questions@freebsd.org mailing list
On Fri, June 10, 2005 12:14, Mario Hoerich said:
# Vulpes Velox:
Jon Mercer [EMAIL PROTECTED] wrote:
[ graphics tablet and FreeBSD? ]
Only restriction is that it has to be relatively recent (i.e. still
in the shops) and most of the functionality should work. PS2 or USB
doen't matter.
Am Freitag, 10. Juni 2005 10:32 schrieb Osmany Guirola Cruz:
I am using -stable and i do the upgrade via CTM
in the freebsd site the last ctm is src-5.0393.gz 06/09/05
i hope that with this was sufficient to solve the problem ;-)
this are the affected file with the ctm file 92 and 93
FS
:-)
I have many restrictions in my network and i can't use cvs or cvsup to
update my port or src tree :-( the only way it's CTM fortunally it
exists i hope that never disapear...
___
freebsd-questions@freebsd.org mailing list
Anybody else seeing this error?
portsdb -uU
Updating the ports index ... Generating INDEX.tmp - please wait..Variable
PKGNAMESUFFIX is recursive.
=== x11-wm/fvwm2 failed
*** Error code 1
1 error
--
i386 FreeBSD 4.11-STABLE
There are 10 types of people in this world. Ones that understand
Leo Lapousterle on 2005-06-10 12:50:33 +0200:
Thank you for your advices. I'll try SpamCop, in manually mode to avoid
wrong SPAM reports.
Additional question : In my ports tree, I can find :
Port: spamcup-1.09
Path: /usr/ports/mail/spamcup
Info: A tool for automatic spam
Andreas Davour [EMAIL PROTECTED] writes:
On Fri, 10 Jun 2005, Mario Hoerich wrote:
# Andreas Davour:
How come my xmodmap isn't working.
It has been obsoleted, I think.
*sigh* time to relearn again. I should have stayed with XFree86.
It's still *there* though, and it still works
Dmitry,
Which is the chipset of your motherboard?
I suspect it´s a problem with ICH5 drivers.
Whith windowz OS they perform identical.
- Marcelo Souza
On Fri, 10 Jun 2005, Dmitry Mityugov wrote:
|On 6/9/05, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
| Dmitry,
|
|
On Fri, Jun 10, 2005 at 01:22:09PM +0200, Mario Hoerich wrote:
# Andreas Davour:
How come my xmodmap isn't working.
It has been obsoleted, I think.
No, it should still work just fine. I have certainly not seen any
notice anywhere that xmodmap has been obsoleted, and it seems to work
On 6/10/05, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Dmitry,
Which is the chipset of your motherboard?
I suspect it´s a problem with ICH5 drivers.
Whith windowz OS they perform identical.
I tried this on a SE7320SP2 Intel server board. I can also run the
test on a
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Philip Hallstrom
Sent: Thursday, June 09, 2005 1:38 PM
To: freebsd-questions@freebsd.org
Subject: Outsourcing a modem pool for dialup? Any advice?
Hi all -
Our company has a product such
On 6/10/05, Steven Friedrich [EMAIL PROTECTED] wrote:
Anybody else seeing this error?
portsdb -uU
Updating the ports index ... Generating INDEX.tmp - please wait..Variable
PKGNAMESUFFIX is recursive.
=== x11-wm/fvwm2 failed
*** Error code 1
1 error
--
i386 FreeBSD 4.11-STABLE
Yes,
When you created the installation CDs, did you verify that checksums
of the ISO files are correct?
--
Dmitry
I'm fairly certain they matched up with their associated md5 values. The
install went fine.
___
freebsd-questions@freebsd.org mailing
On Fri, 2005-06-10 at 15:24 +0800, STST wrote:
Hi all,
I am currently running ipfw from FreeBSD-5.3-RELEASE on my box. The
box passes GRE packets from the external to the internal network. We
run Microsoft RDP over PPTP through the firewall. After upgrading to
FreeBSD 5.3, we realised that
On Fri, Jun 10, 2005 at 06:42:12PM +0600, Ilia Chipitsine wrote:
I tried to investigate supplied tomcat50ctl script, but I couldn't find
where I add -Djava.awt.headless=true to java machine command line
options. Can anyone help me ?
tomcat50ctl isn't actually a script. It's a setuid binary.
Christian Astrup Bakke wrote:
hi,
i'm having problems trying to install mysql41-server from ports since
4.1.12 was made available, using freebsd 4.11:
//
[11:06:51] [EMAIL PROTECTED]:/usr/ports/databases/mysql41-server] # make
install clean
snip
Making all in client
source='mysql.cc'
Thanks all for your help. The -l commands work great, here's the problem. I
came back this morning and found that the ftplog file only recorded data for
few minutes and there was no more data. I know that FTP is heavily used on my
site for posting purposes but the ftplog file showed no more
Hi folks,
i've got a server with FreeBSD 5.4-STABLE and pf with a gigabit
ethernet interface directly on internet. Two C class are routed over
it, and i sell shell account for irc processes. As you know on irc
many times the server is under DDOS attack many time up to 100 mb/s.
But with one
How does one make a patch for a while, that has blanks in the path:
--- foo bar/meow~ Fri Mar 11 09:00:49 2005
+++ foo bar/meowFri Jun 10 12:17:22 2005
- a = 0;
+ a = 1;
With the above example, patch searches only for `foo', then gives up and asks
for help. I tried
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Philip
Hallstrom
Sent: Thursday, June 09, 2005 10:38 AM
To: freebsd-questions@freebsd.org
Subject: Outsourcing a modem pool for dialup? Any advice?
Hi all -
Our company has a product such that a small server
How to get the best results from FreeBSD questions.
===
Last update $Date: 2004/09/19 02:40:48 $
This is a regular posting to the FreeBSD questions mailing list. If
you got it in answer to a message you sent, it means that the sender
thinks that
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
computer books are out of date almost before they are printed. Unfortunately,
The Complete FreeBSD, published by O'Reilly, is no exception.
But with one gigabit connection the problem isn't the band of the
attack, my server's cpu load avarage goes extremly high, you can
verify here:
http://www.6shells.net/graphs/graph_14.html
What can i do for decrease it?
Try to create a new kernel with timing at 1000hz and if
your hardware
Anyone know of any good packages that can create reports (preferably HTML)
for snort logs stored in mysql?
Thanks,
Brent
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send
On Fri, Jun 10, 2005 at 10:06:09AM -0500, Mark Jones wrote:
On 6/10/05, Steven Friedrich [EMAIL PROTECTED] wrote:
Anybody else seeing this error?
portsdb -uU
Updating the ports index ... Generating INDEX.tmp - please wait..Variable
PKGNAMESUFFIX is recursive.
=== x11-wm/fvwm2 failed
Greetings,
I'm having a bit of trouble getting the php4-xml port upgraded/
installed. Using the php4-extensions meta port, with xml support
turned on, once it makes it to the php4-xml port install, it fails
when looking for an expat item:
--
cc -shared xml.lo -Wl,--rpath
On Friday 10 June 2005 07:27 am, Ben Paley wrote:
On Thursday 09 June 2005 23:09, Remington L wrote:
Correction, sorry for the previously post(I'm at work). The problem
lies with the Intel VBIOS not reporting the correct resolution to
Xorg. As a workaround you need to modify the VBIOS and
On Friday 10 June 2005 18:10, Riccardo Giuntoli wrote:
Hi folks,
i've got a server with FreeBSD 5.4-STABLE and pf with a gigabit
ethernet interface directly on internet. Two C class are routed over
it, and i sell shell account for irc processes. As you know on irc
many times the server is
On 6/10/2005 09:34, james g. seems to have typed:
cc: /usr/local/lib/.libs/libexpat.so: No such file or directory
*** Error code 1
[snip]
libexpat.so is in /usr/local/lib, but the .libs on that path looks
bizarre. Any thoughts?
ln -s /usr/local/lib /usr/local/lib/.libs
cd
Help please! I can't make my lab to university =(
P subj.
P I must setting up PDC: unix server and win-clients. But samba not
P compiling =(
P Samba 3.0.14a (and trying with 3.0.13)
P krb5-1.3.4_2
P openldap-2.2.15 with sasl
P uname -a
P FreeBSD freebsd53.localdomain 5.3-RELEASE FreeBSD
On Thu, Jun 09, 2005 at 23:50:47 EDT, Kris Kennaway scribbled these
curious markings:
Could be..do a backup just in case. Also try the smartmontools port
to see if the HD has recorded any defects.
I've retrieved all important data from the disk, and running smartctl's
extended test on both
cc: /usr/local/lib/.libs/libexpat.so: No such file or directory
*** Error code 1
[snip]
libexpat.so is in /usr/local/lib, but the .libs on that path looks
bizarre. Any thoughts?
ln -s /usr/local/lib /usr/local/lib/.libs
cd /usr/ports/lang/php4-extensions
make clean
make install
Or see
I installed a port acroread from my sysinsall
from frebsd 5.0 on my system i than told
kde to use acroread to open all pdf files
ghostview would not work so i decided to
use acroread when i than try to launch the
program it says cant find acroread
i found the exe and tried to launch it by
itself
Can anyone tell me what is status of support of drivers for LSI Logic
SATA 150-6 RAID controllers? I have seen news from May,11 that LSI will
support FreeBSD 5.4 but I was not able to find drivers for 5.4R on their
site. I'm trying to install 5.4R on Fujitsu Siemens RX200S2 which has this
On Fri, Jun 10, 2005 at 09:57:28AM -0800, Peter A. Giessel wrote:
On 6/10/2005 09:34, james g. seems to have typed:
cc: /usr/local/lib/.libs/libexpat.so: No such file or directory
*** Error code 1
[snip]
libexpat.so is in /usr/local/lib, but the .libs on that path looks
bizarre.
On 2005-06-09 13:48, Matt Rechkemmer [EMAIL PROTECTED] wrote:
On Thu, Jun 09, 2005 at 01:51:16PM +0300, Giorgos Keramidas wrote:
If you add quick to the `block from badhosts' rule, packets from
these hosts will immediately be dropped -- which is what you probably
want to do, if I have
Brent Wiese on 2005-06-10 10:21:03 -0700:
Anyone know of any good packages that can create reports (preferably
HTML) for snort logs stored in mysql?
Acidlab produces nice graphs.
pgpxArBS7ThFM.pgp
Description: PGP signature
On 6/10/05, Greg Lehey [EMAIL PROTECTED] wrote:
The trouble with books is that you can't update them the way you can a web
page
or any other online documentation. The result is that most leading edge
computer books are out of date almost before they are printed. Unfortunately,
The Complete
Thanks for all the quick responses! The symlink got the port to
install for now, until the patch lands. I had done a quick search of
the ports list before posting, but should have been searching for
expat information rather than the php4-xml port.
Thanks again!
-J
It is also not officially supported by Xorg. I am told by the driver
developer 6.8.3 will fully support it(hopefully eliminating the need for any
VBIOS workaround)
On 6/10/05, Craig Kleski [EMAIL PROTECTED] wrote:
On Friday 10 June 2005 07:27 am, Ben Paley wrote:
On Thursday 09 June 2005
I am very pleased with ACID
On 6/10/05, Alec Berryman [EMAIL PROTECTED] wrote:
Brent Wiese on 2005-06-10 10:21:03 -0700:
Anyone know of any good packages that can create reports (preferably
HTML) for snort logs stored in mysql?
Acidlab produces nice graphs.
Hi,
anyone successfully configured and used GUS UltraSound on FreeBSD
5.4-STABLE, recently?
I have
device sound
device snd_gusc
in the kernel config and
hint.gusc.0.at=isa
hint.gusc.0.port=0x220
hint.gusc.0.irq=15
hint.gusc.0.drq=5
in the /boot/device.hints, but during
Here's my scenario:
I have a system that we are running in production that there was an
oversight on, and it has a single hard drive installed (32GB SCSI I
believe), rather than a 3 drive raid5 array. We would like to correct
this, but we have all sorts of up-to-date packages and config
--On Friday, June 10, 2005 10:21:03 -0700 Brent Wiese [EMAIL PROTECTED]
wrote:
Anyone know of any good packages that can create reports (preferably HTML)
for snort logs stored in mysql?
BASE - secureideas.sourgeforge.net
Paul Schmehl ([EMAIL PROTECTED])
Adjunct Information Security Officer
I need to connect my freebsd 5.4 box to an oracle 9 db to query it by means of
perl or the statistical software R.
How could I set up this odbc connection (I already installed unixODBC, but
what next and how to set it up)?
Have you any doc to suggest ( I was unable to find anything interesting
This is how I do it on linux.. Correct me if I am wrong.
rsync -vrplogDtH /* /new
chroot and edit the fstab etc
I do not know how to fix the bootrecord in freebsd, please find howto.
boot from the array
lets hope this helps.
- Sarath
Tony Shadwick wrote:
Here's my scenario:
I have a system
[EMAIL PROTECTED] wrote:
I need to connect my freebsd 5.4 box to an oracle 9 db to query it by
means of perl or the statistical software R.
How could I set up this odbc connection (I already installed
unixODBC, but what next and how to set it up)?
Have you any doc to suggest ( I was unable to
Someone broke the silence:
Here's my scenario:
I have a system that we are running in production that there was an
oversight on, and it has a single hard drive installed (32GB SCSI I
believe), rather than a 3 drive raid5 array. We would like
to correct
this, but we have all sorts of
Mikhail Teterin wrote:
How does one make a patch for a while, that has blanks in the path:
--- foo bar/meow~ Fri Mar 11 09:00:49 2005
+++ foo bar/meowFri Jun 10 12:17:22 2005
- a = 0;
+ a = 1;
With the above example, patch searches only for `foo', then gives up and
Except that I still have to re-install all of the packages in /usr/local,
many which have been built from sources. or are you suggesting that I
copy out the /usr/local tree as well? Will that break anything?
On Fri, 10 Jun 2005, Haulmark, Chris wrote:
Someone broke the silence:
Here's my
Someone broke the silence:
Except that I still have to re-install all of the packages in
/usr/local, many which have been built from sources. or are you
suggesting that I
copy out the /usr/local tree as well? Will that break anything?
snipped
Well, you brought up something that I forgot
--- foo bar/meow~ Fri Mar 11 09:00:49 2005
+++ foo bar/meowFri Jun 10 12:17:22 2005
- a = 0;
+ a = 1;
With the above example patch searches only for `foo', then gives up and
asks for help. I tried quoting the entire file name and escaping the
blanks with backslashes --
Hello,
Has anybody had any success with Flash on Mozilla or Firefox on FreeBSD 5.4?
I used to have some nominal success with Flash before (but slow and
cranky) using linuxpluginwrapper.
But now that port fails to install at all.
I see in the FreeBSD ports, there are a handful of other flash
This day I've a very strange error when trying to connect to my FreeBSD machine
(4.11-STABLE)
I got the following error:
ssh_exchange_identification: Connection closed by remote host
Can anyone give me any clue what's wrong?
Jack
___
Hi there,
well I got a new laptop a Acer Aspire 3002LC which installed FreeBSD
5.4 and no hitch exept that when it boots it is complainig about
something with acpi. Here the dmesg:
-Snip-
Copyright (c) 1992-2005 The FreeBSD Project.
I am a total noob regarding MySQL. I have version 3.23 installed on my
4.10 system. The only thing it's been used for and by is Bacula. I
have never used it directly.
But now I have reason to learn MySQL and feel it would be appropriate to
start with a newer version. I see there's 4.1 and
Hello,
When I attempt to do a portupgrade on glib using portupgrade -a -r the system
produces the output I have included here. My questions are:
1 - Do I really need to upgrade glib?
2 - If so, how do I do it properly in this case?
Thank you,
FreeBSDUtah
System output as follows:
On Fri, Jun 10, 2005 at 01:52:25PM -0700, M. Goodell wrote:
Hello,
When I attempt to do a portupgrade on glib using portupgrade -a -r the system
produces the output I have included here. My questions are:
1 - Do I really need to upgrade glib?
Perhaps, perhaps not. It depends on how
Jack Raats wrote:
This day I've a very strange error when trying to connect to my FreeBSD machine
(4.11-STABLE)
I got the following error:
ssh_exchange_identification: Connection closed by remote host
Can anyone give me any clue what's wrong?
Jack
Hello,
I've been using FreeBSD 5.3-RELEASE on a production machine, but now I
have some problem with my users. One of them isn't an experienced
FreeBSD user, and accidentally started 19 instances of the same program,
and these instances crashed in the background and produced a load
average
Hi!
Is anyone using a RocketRaid 1820 card on FreeBSD 5.4/amd64?
I know it is not officially supported, however I saw some messages on
google that it is possible to use it with the 5.3 driver from the vendor.
I would be very grateful if someone shares his/her experience.
TIA,
Dimitar Vassilev
Here's my scenario:
I have a system that we are running in production that there was an oversight
on, and it has a single hard drive installed (32GB SCSI I believe), rather
than a 3 drive raid5 array. We would like to correct this, but we have all
sorts of up-to-date packages and config
hey!
pf blocks me from ftp'ing out from my workstation (behind my pf box) and i
don't know why.
it only blocks, however, the ftp's i've been downloading a lot from during the
past few days.
ftp'ing out *from* my pf box works just nicely.
some of my users report not being able to ssh in, too.
Hi
i am trying to restrict the ssh access to my machine from a specific
machine and i am using hosts.allow but does not wor for me this is
my /etc/hosts.allow file
sshd : capella.cigb.edu.cu : deny
then i restart the sshd daemon and doe not work i still have access from
this machine ...
Nope, everything is from ports. was just trying to avoide the 2+ days of
compiling needed to rebuild everything. :(
On Fri, 10 Jun 2005, Haulmark, Chris wrote:
Someone broke the silence:
Except that I still have to re-install all of the packages in
/usr/local, many which have been built
Hi,
After doing the modfications on login.conf, run:
# cap_mkdb /etc/login.conf
Define the class for each user in passwd, using vipw. The class is
the 5th field, in this example the class was defined as limiteduser:
On Fri, 10 Jun 2005, Tony Shadwick wrote:
I have a system that we are running in production that there was an oversight
on, and it has a single hard drive installed (32GB SCSI I believe), rather
than a 3 drive raid5 array. We would like to correct this, but we have all
sorts of up-to-date
On Fri, Jun 10, 2005 at 05:30:53PM +, Osmany Guirola Cruz wrote:
Hi
i am trying to restrict the ssh access to my machine from a specific
machine and i am using hosts.allow but does not wor for me this is
my /etc/hosts.allow file
sshd : capella.cigb.edu.cu : deny
make sure you
Philip Hallstrom on 2005-06-10 14:07:28 -0700:
Then somewhere else I have an NFS server running. Mount the share on your
live CD box. dump each partition to the share.
If you're going to take this approach, nothing is simpler than g4u.
g4u is wonderful.
pgp8wK2xR03Js.pgp
Description: PGP
I've got a wg311v2 card that i'd like to configure as a wireless access
point.
I was able to get the card to come up, and ping it, by doing the following
steps:
I made the ndis and if_ndis modules (with the WinXP drivers included on the
disk), and got the card to come up after copying the
1 - 100 of 126 matches
Mail list logo
