Running Linux binaries

Hi all. I'm trying to run a Linux binary in FreeBSD 5.2. I have Linux compat installed and kld module linux.ko loaded I'm getting this error message: $ ./breve ./breve: error while loading sharing libraries: libglut.so.3: cannot open shared object file: No such file or directory It looks like it

Running Linux binaries

Hi all. I'm trying to run a Linux binary in FreeBSD 5.2. I have Linux compat installed and kld module linux.ko loaded I'm getting this error message: $ ./breve ./breve: error while loading sharing libraries: libglut.so.3: cannot open shared object file: No such file or directory It looks like it

DNS Auto in KPPP in FreeBSD 7.1

Hi to All! Sorry for my bad English, i am beginning FreeBSD user from Russia..___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to

#2 DNS Auto in KPPP in FreeBSD 7.1

Hi to All! Sorry for my bad English. My problem: I am have 3G/EDGE modem ZTE MF622+ and FreeBSD 7.1. In using KPPP (KDE 3.5.10) my modem can't connect to EDGE provider, because in KPPP not enabled option Auto DNS setting. If manually set this option, that says tech support of provider, pppd

Auto DNS in KPPP in FreeBSD 7.1

Hi to All! Sorry for my bad English, i am beginning FreeBSD user from Russia..___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to

fsck on a mounted fs as read-only

-yf / dev/aacd0 ** / Dev/aacd0 (NO WRITE) ** Last Mounted on / var / ftp ** Phase 1 - Check Blocks and Sizes As I understand it does not fix the fsck filesystem. -- С уважением, Dmitry mailto:dmi...@zhigulinet.ru ___ freebsd

xfce4/gnome + compiz - slow launch.

After installing compiz-fusion, xfce4 or gnome is launching very slow. Looks like some timeout, xfdesktop is quite slow. Even when I don't start compiz, this happens, but I don't start xfwm4 or metacity, so there are no conflicts between WMs. When I logout and save current sessions with pidgin,

Problem with freebsd-update

Hello freebsd-questions, I need to update mpd4 binary package via freebsd-update. After installing FreeBSD 6.2 RELEASE I have mpd4-4.0b4. Settings in /etc/freebsd-update.conf: Components src world kernel After running commands freebsd-update fetch, then freebsd-update install I

Re: monitoring serial consoles (was Re: erorrs from spec_getpages)

have good hardware support _in_addition_ to that, you can sleep much better ;-P Sincerely, D.Marck [DM5020, MCK-RIPE, DM3-RIPN] *** Dmitry Morozovsky --- D.Marck --- Wild Woozle --- [EMAIL

image a disk/partition?

some enlightenment. Thank you in advance for any help you can provide P.S. I am not on the list, don't forget to copy me. Dmitry ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any

subsribe freebsd-questions@freebsd.org

subsribe [EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

Firewall for VoIP box

VoIP box. VoIP box has also its own real IP (lets say 65.1.1.3). How should firewall be configured for card #2 for allowing VoIP traffic? What ports should be open for normal VoIP work? Thanks, Dmitry ___ [EMAIL PROTECTED] mailing list http

Accessing vpn through another interface

solution for people from 192.168.1.0/24 to access that VPN through that FreeBSD box? Dmitry Chorine Consultant ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

Freebsd-4.9

Hi I just download ISO of 4.9-RELEASE and after installing I cvsup RELENG_4_9, after that I buildwolrd and buildkernel, kernel installed fine, but when I install world I get this error: -- Installing everything..

RE: Freebsd-4.9

Yes, I do Alexus -Original Message- From: matthew [mailto:[EMAIL PROTECTED] Sent: Tuesday, February 17, 2004 7:36 PM To: Dmitry Chorine Cc: [EMAIL PROTECTED] Subject: Re: Freebsd-4.9 On Tue, 17 Feb 2004, Dmitry Chorine wrote: Hi I just download ISO of 4.9-RELEASE and after

RE: Freebsd-4.9

I think you were right, my date was incorrect, I changed my date rebuild world and now it's installing just fine Thanks -Original Message- From: Kent Stewart [mailto:[EMAIL PROTECTED] Sent: Wednesday, February 18, 2004 12:11 AM To: [EMAIL PROTECTED] Cc: matthew; Dmitry Chorine Subject

Re: Clarification needed on Handbook: Tracking for Multiple Machines

] *** Dmitry Morozovsky --- D.Marck --- Wild Woozle --- [EMAIL PROTECTED] *** ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions

Globespan ADSL modem

Hi Is it possible to make Globespan-based ADSL modem to operate under FreeBSD 5.2-RELEASE Thank you in advance ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL

Re: openoffice-1.1.1RC install without jdk

[DM5020, MCK-RIPE, DM3-RIPN] *** Dmitry Morozovsky --- D.Marck --- Wild Woozle --- [EMAIL PROTECTED

Need to encrypt root partition.

Hello, How can i encrypt root partition? I find some for linux (loop-AES + /dev/loop device) and now search for the same method for freebsd... Point me at the right direction... -- Best regards, Dmitry mailto:[EMAIL PROTECTED] pgp0.pgp

Trouble with pccard! Need hint...

? -- Best regards, Dmitry mailto:[EMAIL PROTECTED] pgp0.pgp Description: PGP signature

[no subject]

Hallo! Help me please. How can I do low level format IDE disk on FreeBSD 4.7? To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message

[no subject]

Hi! My BIOS not have tools for low level format (Compaq ProLiant) To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message

[no subject]

Well! I have very many bad sectors! How can I do to get rid from them? To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message

[no subject]

it is IDE. As it all the same to make? (Disk low level format or other format) To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message

File on ftp is broken

, mail directly to me if details are needed. Dmitry To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message

Re: the CPU interrupt handler

On Fri, Apr 04, 2003 at 03:04:27PM -0800, Kan Cai wrote: Hi, all: I am trying to locate the CPU interrupt handler, but with no luck. I guess it is somewhere in the i386 folder, but not sure which file is doing the job. Could someone there shed some lights on this? Since I am trying

re: USB External Drive

. Best regards, Dmitry Kroupenier. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

[no subject]

subscribe freebsd-questions To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message

CVSUp from 4.3 to 4.7

/libexec/elf/ld: cannot find -lc *** Error code 1 Stop in /usr/src/lib/libncurses. *** Error code 1 Stop in /usr/src. *** Error code 1 Does anybody now what I should to do in order to fix this. Thanks a lot. Dmitry. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions

z-modem bug

Good day to all! Please hepl to solve unusual error. I have a Fidonet node on my PC. When a remote modem caller connects to my side my modem is hanging up after or while EMSI handshake is running and reports with these words to /var/log/messages: Nov 20 23:44:09 node8 ifcico[28293]:

Re: maxusers and random system freezes

/netstat -m/sysctl vm ? Possibly to remote machine via remote syslog? Sincerely, D.Marck [DM5020, DM268-RIPE, DM3-RIPN] *** Dmitry Morozovsky --- D.Marck --- Wild Woozle --- [EMAIL PROTECTED

OS comparison

Hi, everybody. I was just wondering are there any resources on the web (or anywhere) that have an information on the OS comparison, advantages and disadvantages of different operating systems. Thanks in advance. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions

Very strange behavior of ls user groups

for such kind of limitations? great thanks for help and advices! please respond to [EMAIL PROTECTED] -- Best regards, Dmitry Popov To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message

unknown option MAXUSERS

I tried recompile FreeBSD 5.3 kernel with IPFW support and added only two lines: options IPFIREWALL # Enables the kernel firewall code. options IPFIREWALL_VERBOSE # Sends logged packets to the system logger. I've used both methods from your documentation : 1. metod

Re: unknown option MAXUSERS

On Friday 18 February 2005 10:52, Jamie Novak wrote: On 02/17, Dmitry M. rearranged the electrons to read: -bash-2.05b# config MYKERNEL MYKERNEL: unknown option MAXUSERS It's probably because maxusers is a lowercase-only option in the config, right along with the ident, machine, and cpu

SATA H6300ESB

present. With same environment the 3Ware 8506-4LP works fine (with twe driver). Does FreeBSD supports Intel® H6300ESB Serial ATA Controller and if, what driver should I use? -- WBR, Dmitry Kozhevnikovmailto:[EMAIL PROTECTED

Re: how to deal with spam for good?

LM Hi, LM I'm wondering, how does this mailing list doesn't get any spam? :), LM I need to set some filter on my mail server, can some one here give LM me a hint on this? LM thanks Spamers are too lazy to subscribe freebsd-questions, so they can't post here :) -- WBR, Dmitry Kozhevnikov

Re: ng_netlow and mpd

, Alexandr. AL Hello Freebsd-questions, AL I have ip statistics collector based on ng_netflow. AL It was working on old server, but now (server was reinstalled due to AL HDD failure). AL But now it is working with ethernet interfaces and not working with AL pptp (mpd). AL All configs

Re[2]: Strange load averages on 5.3-STABLE

please show us 1. cat /var/run/dmesg.boot 2. uname -a 3. egrep (^REVISION|^BRANCH) /usr/src/sys/conf/newvers.sh GPT David Fleck wrote: On Thu, 10 Mar 2005, Michael Ross wrote: last pid: 771; load averages: 176.65, 770.13, 926.55 up 0+00:03:13 08:11:07 Your may have compiled kernel and

Re[2]: Strange load averages on 5.3-STABLE

Sometimes I get strange effects on 5.3-STABLE too. So I use tag=RELENG_5_3 and have no such troubles. Try this, maybe sources was broken a little that time? GPT Dmitry Kozhevnikov wrote: please show us 1. cat /var/run/dmesg.boot 2. uname -a 3. egrep (^REVISION|^BRANCH) /usr/src/sys/conf

Trouble with ipfw :( help!

pathcost 8 age 2 max 20 hello 2 fdelay 15 3rd: i put rule back! and all start work fine... Aug 25 15:45:39 ns2 kernel: ipfw: Accept MAC in via ex1 Aug 25 15:46:11 ns2 last message repeated 18 times what to do? -- Dmitry Zadvornykh BIN-Bank http://www.binbank.ru

Wrong system time when booting off cd9660

something like Thu Jan 1 03:00:00 MSK 1970 (actuall this system uses /etc/localtime copied from /usr/share/zoneinfo/Europe/Kiev; and yes, back in 1970 it was Moscow time here ;). If I reset system time using 'date' or 'ntpdate', it actually updates RTC. Why do I have such an effect? Sincerely, Dmitry

Re: a SED need

// your_file -- Dmitry Sidorov PEM QA Engineer SWsoft, Inc. E-mail: [EMAIL PROTECTED] ICQ UIN: 864582 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL

Re: pkg_delete question

can I do it? can I pkg_delete -r xxx? thanks. yes you can, ls -al /var/db/pkg find your package name, and execute: pkg_delete -r package_name -- Dmitry Sidorov PEM QA Engineer SWsoft, Inc. E-mail: [EMAIL PROTECTED] ICQ UIN: 864582 ___ freebsd

USR 56k Internal WinModem

56k Internal WinModem' class= simple comms I've found no drivers for it... Best regards,    Dmitry Pisklov    Developer    StarSoft Development Labs

Re: IPFW Problems?

, though I can miss something. Also every custom utility which utilizes netinet/ip_fw.h must also be recompiled with IPFW2 defined and rebuilt (and those using libalias must be rebuilt). Sincerely, Dmitry -- Atlantis ISP, System Administrator e-mail: [EMAIL PROTECTED] nic-hdl: LYNX-RIPE

Re[2]: newbie dns mess w/ nic

a couple of times :) -- Best regards, Dmitry Kochetov (ALG12-RIPN, ALGR-RIPE) mailto:[EMAIL PROTECTED] ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail

question

Greetings, As to me to make so that to ssh those who is registered in hosts.allow could be connected only Now in mine hosts.allow: sshd: MYIP: allow sshd: ALL: deny But that does not work! ___ [EMAIL PROTECTED] mailing list

vpn

Hello I need to be able to connect to my FreeBSD server using VPN client that comes with Windows 2000/XP. 1) I would like to be able to surf internet but I don't want others to see my real public IP, only public IP of my FreeBSD server. 2) Is it possible to use only software part that comes with

Re: Knoppix-like FreeBSD-on-a-CD?

PH Sorry if I'm missing something obvious, but is there a PH FreeBSD-on-a-CD project similar to Knoppix for Linux? http://frenzy.org.ua/eng/ ftp://ftp.opennet.ru/pub/FreeBSD/Frenzy/frenzy_v03_release.iso -Dmitry. ___ [EMAIL PROTECTED] mailing list

Re: Initial install of FreeBSD and adding additional hardware

, but it certainly is better to be sure it is compatible with FreeBSD before ordering it, or at least to buy it with money-back warranty. You can find some useful (but not absolutely complete) info about hardware compatibility there: http://www.freebsd.org/releases/5.4R/hardware.html -- Dmitry We live less

Re: mismatch results with disk performance

what the original problem was. Was it that any IDE HDD attached to the 2ndary IDE controller always works very slow? Or was it that an IDE HDD attached as slave always works very slow? I can try to reproduce this on weekend, I just need to understand what should I look for. -- Dmitry We live less

Re: mismatch results with disk performance

On 6/9/05, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: Dmitry, Both situations have the same result, an Slave IDE HDD on primary controller, or a master HDD on the 2nd IDE controler, works much more slow, testing with 'dd'. I couldn't see that with diskinfo. I can't

Re: g++ successfully compiled Hello World program causes segfault at runtime

? However, it would be strange to install with default settings that wouldn't work with a simple Hello World program IMO. When you created the installation CDs, did you verify that checksums of the ISO files are correct? -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E

Re: mismatch results with disk performance

On 6/10/05, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: Dmitry, Which is the chipset of your motherboard? I suspect it´s a problem with ICH5 drivers. Whith windowz OS they perform identical. I tried this on a SE7320SP2 Intel server board. I can also run the test

Re: The Complete FreeBSD: errata and addenda

this is a feedback you were also looking for. -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send

Re: make installkernel fails instantly w/ signal 11

, or the HDD is faulty, or the CDs were written with errors? The bug you're describing is quite unusual. -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E ___ freebsd-questions@freebsd.org mailing list http

Re: Setting a simple firewall for PPPoE connection

helpful: http://www.defcon1.org/html/Networking_Articles/Firewall-Ipfw/firewall-ipfw.html. -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman

Re: A Question About the PowerPC Architecture

? _ Don't just search. Find. [1]MSN Search Check out the new MSN Search! The last sentence kind of contradicts to the rest of the message, don't you think. :-) -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E ___ freebsd

Re: Problem w/ simple Hello World compiled w/ g++

, or you're running what you installed from CDs? Where did you obtain the CDs? -- Dmitry So you're running 5.4 on an Athlon as well and yours works? Just my luck. I installed from 5.4 ISO's I downloaded and burned from... umm... I think a freebsd.org mirror. I have not updated my installation I

Re: Problem w/ simple Hello World compiled w/ g++

On 6/14/05, Keyser [EMAIL PROTECTED] wrote: Just tried your code on a freshly installed machine, just standard install, no updates performed, and I still cannot reproduce the problem. Your code compiles and runs fine. -- Dmitry Yeah, that's what I feared. At this point the only

Re: Very Dissapointed

on. It's amazing what sponsored link Goggle choose appropriate for your reply Lane: highpaysurveys.com/microsoft.html. Now you're not only offered some help, but also $300! -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E

Re: Need a HELP Lead .. For: xorg 6.8.2 - wont start

on the target machine? -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: SMP and networking under FreeBSD 5.3

networking is still not working right. Also /dev/kmem and /dev/mem are missing so netstat -ar does not work either. Where do I start to find a solution to this? Does FreeBSD 5.4 exhibit the same behavior? -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E

Re: Shrinking slices to make room for linux

, if you indeed just installed it, why you can't just reinstall it, leaving more space for other operating systems this time? -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E ___ freebsd-questions@freebsd.org mailing list http

Re: Shrinking slices to make room for linux

Live CD (like Knoppix), without resising your disks at all. -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions

Re: Wine: HEAP_CreateSystemHeap Error

you for any help you can provide. Wondering if specifying MAXDSIZ in your kernel and/or limit memoryuse unlimited may be of any help? -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E ___ freebsd-questions@freebsd.org

Re: disabling ata devices

it without physically removing it from the system. is there anyway to remove the node without removing the iso9660 entry from the kernel? Is it possible to disable it in BIOS? -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E

Re: disabling ata devices

On 6/15/05, JM [EMAIL PROTECTED] wrote: Dmitry Mityugov wrote: On 6/15/05, JM wrote: i'm not exactly sure how to accomplish this... i'm having problems with my cd-rom, which isn't surprising since it's a slim-line without UDMA and probably isn't supported... but... it's eating up time

Re: New 5.4 installation locks up at 'uhcio0'

using Safe Mode, but obviously that isn't a solution. Please help, this is my companies first move away from Microsoft systems and I'd like this to go as smoothly as possible. Thanks! Can you boot with ACPI disabled? -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E

Re: OT: Procmail crashing with FreeBSD

/pipermail/freebsd-questions/2005-June/date.html ? -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send

Re: Driver D-Link DGE-550SX

2 other ethernet adapters) but it may be possible to use an NDIS Windows driver for it, as mentioned, for example, at http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-wireless.html. If you find a way to force this card to work with FreeBSD, please let us know :-) -- Dmitry We

Re: A question about dwnloading Ports

. -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Advice replacing Xorg with XFree86_4 - Nightmare on Elm Street Up_1

as the very first step of installation (press F1 instead of Enter to find out how). -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo

Re: Problems since 5.3-RELEASE-p15

symbol table Is there a more or less reliable way to reproduce this? What should I run to try to reproduce this? -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E ___ freebsd-questions@freebsd.org mailing list http

Re: how to install on laptop? video issue?

and choices? I have googled for this without success. Thanks, I doubt this is graphics. FreeBSD installer works in text mode. Can you see the initial menu (with FreeBSD mascot, ASCII-art style, on the right side of the screen) before the screen gets blank? -- Dmitry We live less by imagination

Re: Correct step for setting up MBR on a windows drive?

to it. I did not actually unplug the drives but just disabled the secondary IDE controller in BIOS (where FreeBSD was installed) before installing NetWare. -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E ___ freebsd-questions

Re: CVSup -install

of salt, but I'd download the ISO images for FreeBSD 5.4, verified that they are intact with md5 program, created the disk(s) and tried to install it again. -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E ___ freebsd-questions

Re: CVSup -install

On 6/22/05, Jean-Paul Natola [EMAIL PROTECTED] wrote: Is this not the proper release ftp://ftp.freebsd.org/pub/FreeBSD/releases/i386/ISO-IMAGES/5.4/ Yes, it seems it is. Is this what you tried to install already? -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E

Re: Using regex(3)

seeing 0's instead of valid output in your program. Hope this helps. But in that case, printf seems to take 2 successive %d and split the variable upon them to make it a %lld. I am no C guru, but that sound very bad to me. -- Dmitry We live less by imagination than despite it - Rockwell Kent

Re: FreeBSD Machines dieing, we've tried so much....

for 5.5-RELEASE? September 2005, according to http://www.freebsd.org/releng/index.html. -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman

Re: ccd usage

by somebody else. -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Simple ipfw problem :(

rules for ipfw might look like to do NAT: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/firewalls-ipfw.html. I had no problems setting my firewall using that chapter as a starting point. -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E

Re: Does Firefox 1.0.4 suck, or is it just me ?

tend to do that, for well understandable but not quite correct reasons. -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions

Re: Simple ipfw problem :(

=ddial ppp_profile=myisp ppp_nat=YES# alternatively nat enable yes in ppp.conf I hope I didn't forget about something. nat deny_incoming yes might be a good addition to this list. -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E

Re: cacti updates

Is there no way to patch it? I just upgraded my ports tree and there is indeed the latest version of this tool there. What's wrong with cvsup approach? Guess you can also download and install the binaries directly with pkg_add -r. -- Dmitry We live less by imagination than despite

Re: Gnome2 Hangs at Splash Screen

this but have found nothing. Any advice, suggestions or comments would be appreciated. How does your .xinitrc file look like? -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E ___ freebsd-questions@freebsd.org mailing list

Re: FreeBSD mini-ITX

Durron in it and it runs at 64C idle, with the case open and a good heat sink. What heat sink, what model? Just in case I need to buy one. Just to know what to avoid. -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E

Re: Intel SE7320VP2 board + Marvell 88E8050 nic.

but Marvell 88E8001 is supported on one of my machines, by sk0 driver. -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions

Re: waiting 15 seconds for scsi devices to settle

but this did nothing. I tried the installation with FreeBSD 5.3 and the same thing happened. Hope you can help me sort this out as I have a simmilar compaq server which has it installed and works fine. Many thanks for your time. Try to load the installer with ACPI disabled. -- Dmitry We live

Re: commercial development needed

GNUstep-GTK1+GTKstep-KDE3+NEWstep, owing to their ergonomic behaviours, making possible to an autistic to stand in frond of the monitor. You may find what you are looking for at http://www.freebsd.org/commercial/consult_bycat.html. -- Dmitry We live less by imagination than despite

Re: ipfw2 and clearing a rules state table records

On 7/1/05, fbsd_user [EMAIL PROTECTED] wrote: Is there a way in 5.4 ipfw2 to reset/delete/clear a stateful rule's records in the state table? Never tried this myself, but probably by temporarily lowering net.inet.ip.fw.dyn_*_lifetime? -- Dmitry We live less by imagination than despite

Re: SATA timeout problems

, if I read it right, that ICH6 was supported in 6.0 but not in 5.4. -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions

Re: Linux move to FreeBSD

), I'll be installing something like Ubuntu on that machine, not FreeBSD, because my friend and his family are religious men. -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E ___ freebsd-questions@freebsd.org mailing list

Re: Linux move to FreeBSD

On 7/4/05, Bob Hall [EMAIL PROTECTED] wrote: On Mon, Jul 04, 2005 at 01:02:33AM +0400, Dmitry Mityugov wrote: I am, personally, currently helping my friend to buy and configure a computer for him and his family. Although I know FreeBSD better than Linux (and this does not mean I am

Re: Linux move to FreeBSD

On 7/4/05, Graham Bentley [EMAIL PROTECTED] wrote: The devil made me do it ! besastie.4th \ 46 4 print-beastie The power of .. choice ! Okay, okay. What about the Gnome startup screen? -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E

Re: Running FreeBSD server behind a firewall with nat

a name via DNS that apparently is not working. It should continue in a few minutes if you wait that long. What hardware firewall are you using? Is it possible to attach your server to the Internet directly, without using a firewall in the middle? -- Dmitry We live less by imagination than despite

Re: Some doubts to start

etc in my language whereas in KDE I can't. -- Dmitry We live less by imagination than despite it - Rockwell Kent, N by E ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any

Re: hang-up's on clean FreeBSD 5.4 on compilation

tried this several times, and it hangs up in different places, always on 'cc' command. Maybe it's something with my memory? ... Looks like that. There is a couple of memory test programs, I like these: http://www.memtest86.com/ http://www.ocztechnology.com/aboutocz/press/2004/114 -- Dmitry We

  1   2   3   >