Re: (no subject)

[Derrick MacPherson]

As soon as you send these, you find an answer. Loaded geom_stripe and I was 
able to see the array



--Original Message--
From: Derrick MacPherson
Sender: owner-freebsd-questi...@freebsd.org
To: freebsd-questions@freebsd.org
Subject: (no subject)
Sent: Aug 10, 2009 14:40


I had a ssd drive in a system to use as temp backup server, it has 6 1tb
drives in it that i created a raid0 (i'm pretty sure that's what I
created) and used as a backup, to rebuild our file server. the ssd drive
was taken back after a couple weeks as the box was no longer being used.
At this point I need to check whats on that array due to some data
corruption. The drives in the array are probably not plugged in as they
were when used before. Is it possible, and if so how, to recover that
array? I've popped in a different system drive and have got the box back
up, I thought there'd be a way to read the labels on the drives and
recreate the raid set.. am i wrong?


-- 

Derrick MacPherson

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"


Sent from my BlackBerry. ___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"

(no subject)

[Derrick MacPherson]

I had a ssd drive in a system to use as temp backup server, it has 6 1tb
drives in it that i created a raid0 (i'm pretty sure that's what I
created) and used as a backup, to rebuild our file server. the ssd drive
was taken back after a couple weeks as the box was no longer being used.
At this point I need to check whats on that array due to some data
corruption. The drives in the array are probably not plugged in as they
were when used before. Is it possible, and if so how, to recover that
array? I've popped in a different system drive and have got the box back
up, I thought there'd be a way to read the labels on the drives and
recreate the raid set.. am i wrong?


-- 

Derrick MacPherson

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "freebsd-questions-unsubscr...@freebsd.org"

RE: degraded RAID performance after OS upgrade, and drives added.

[Derrick MacPherson]

That seems like a pretty crazy drop in performance, more than one would expect. 
The machine is busy but not busy enough to warrant this.. Imo.. Is there a way 
to test to confirm?

-Original Message-
From: "Chuck Swiger" <[EMAIL PROTECTED]>
To: "Derrick MacPherson" <[EMAIL PROTECTED]>
Cc: freebsd-questions@freebsd.org
Sent: 11/30/06 10:39
Subject: Re: degraded RAID performance after OS upgrade, and drives added.

On Nov 29, 2006, at 6:18 PM, Derrick MacPherson wrote:
> We updated to 6.1 this weekend and added 3 300gb drives to the  
> external raid cabinet, they were to go on a seprate controller but  
> the server happens to have a few other boxes on top making it  
> impossible at that time, so we put the 3x300  (RAID5) , upgraded  
> the OS and  performance is very poor. When I run systat I see  
> upward of 300 tps on the problematic array (da2) and under systat - 
> vmstat :

It's normal for RAID-5 to perform worse than a single drive-- and  
sometimes it performs much worse, as in nearly an order of magnitude  
slower, for the case of very small writes.  If you value performance,  
choose another RAID level like RAID-0, RAID-1, or RAID-10.

-- 
-Chuck


___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

degraded RAID performance after OS upgrade, and drives added.

[Derrick MacPherson]

We updated to 6.1 this weekend and added 3 300gb drives to the  
external raid cabinet, they were to go on a seprate controller but  
the server happens to have a few other boxes on top making it  
impossible at that time, so we put the 3x300  (RAID5) , upgraded the  
OS and  performance is very poor. When I run systat I see upward of  
300 tps on the problematic array (da2) and under systat -vmstat :


Disks   da0   da1   da2 pass0 pass1 pass2
KB/t 0.00  0.00 15.00  0.00  0.00  0.00
tps   0  0  341 0 0 0
MB/s   0.00  0.00  4.99  0.00  0.00  0.00
% busy0 095 0 0 0

the busy percentage is consistenly over 90% sometimes over 100%. I'm  
not sure where to go next with providing info for someone to look at  
or testing to run..


camcontrol devlist
 at scbus0 target 0 lun 0 (da0,pass0)
 at scbus0 target 1 lun 0 (da1,pass1)
 at scbus0 target 2 lun 0 (da2,pass2)

out of dmesg:

ciss0:  port 0x3000-0x30ff mem  
0xf05c-0xf05f,0xf04f-0xf04f3fff irq 30 at device 3.0 on

pci1
ciss0: [GIANT-LOCKED]


da0 at ciss0 bus 0 target 0 lun 0
da0:  Fixed Direct Access SCSI-0 device
da0: 135.168MB/s transfers
da0: 140006MB (286734240 512 byte sectors: 255H 32S/T 35139C)
da1 at ciss0 bus 0 target 1 lun 0
da1:  Fixed Direct Access SCSI-0 device
da1: 135.168MB/s transfers
da1: 140006MB (286734240 512 byte sectors: 255H 32S/T 35139C)
da2 at ciss0 bus 0 target 2 lun 0
da2:  Fixed Direct Access SCSI-0 device
da2: 135.168MB/s transfers
da2: 572195MB (1171856412 512 byte sectors: 255H 63S/T 65535C)



dmesg
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights  
reserved.

FreeBSD 6.1-RELEASE-p10 #0: Sat Nov 25 15:52:17 PST 2006
[EMAIL PROTECTED]:/usr/src/sys/i386/compile/SMP
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 2.80GHz (2786.87-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0xf25  Stepping = 5
   
Features=0xbfebfbff,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>

  Features2=0x4400>
  Logical CPUs per core: 2
real memory  = 2147459072 (2047 MB)
avail memory = 2096439296 (1999 MB)
ACPI APIC Table: 
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID:  0
cpu1 (AP): APIC ID:  1
cpu2 (AP): APIC ID:  6
cpu3 (AP): APIC ID:  7
MADT: Forcing active-low polarity and level trigger for SCI
ioapic0  irqs 0-15 on motherboard
ioapic1  irqs 16-31 on motherboard
ioapic2  irqs 32-47 on motherboard
ioapic3  irqs 48-63 on motherboard
kbd1 at kbdmux0
acpi0:  on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x920-0x923 on acpi0
cpu0:  on acpi0
cpu1:  on acpi0
cpu2:  on acpi0
cpu3:  on acpi0
pcib0:  on acpi0
pci0:  on pcib0
pci0:  at device 3.0 (no driver attached)
pci0:  at device 4.0 (no driver attached)
pci0:  at device 4.2 (no driver attached)
isab0:  at device 15.0 on pci0
isa0:  on isab0
atapci0:  port  
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x2000-0x200f at device 15.1 on pci0

ata0:  on atapci0
ata1:  on atapci0
ohci0:  mem 0xeeef-0xeeef0fff irq  
7 at device 15.2 on pci0

ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0:  on ohci0
usb0: USB revision 1.0
uhub0: (0x1166) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
pcib1:  on acpi0
pci1:  on pcib1
ciss0:  port 0x3000-0x30ff mem  
0xf05c-0xf05f,0xf04f-0xf04f3fff irq 30 at device 3.0 on pci1

ciss0: [GIANT-LOCKED]
pcib2:  on acpi0
pci2:  on pcib2
bge0:  mem  
0xf06f-0xf06f irq 29 at device 1.0 on pci2

miibus0:  on bge0
brgphy0:  on miibus0
brgphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,  
1000baseTX-FDX, auto

bge0: Ethernet address: 00:11:0a:9e:2f:49
bge1:  mem  
0xf06e-0xf06e irq 31 at device 2.0 on pci2

miibus1:  on bge1
brgphy1:  on miibus1
brgphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX,  
1000baseTX-FDX, auto

bge1: Ethernet address: 00:11:0a:9e:2f:48
pcib3:  on acpi0
pci3:  on pcib3
pcib4:  on acpi0
pci6:  on pcib4
pci6:  at device 30.0 (no  
driver attached)

acpi_tz0:  on acpi0
atkbdc0:  port 0x60,0x64 irq 1 on acpi0
atkbd0:  irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0:  irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3
sio0:  port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
fdc0:  port 0x3f2-0x3f5 irq 6 drq 2 on  
acpi0

fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pmtimer0 on isa0
orm0:  at iomem 0xc-0xc7fff,0xc8000-0xcbfff, 
0xcc000-0xcd7ff,0xee000-0xe on isa0

ppc0: parallel port not found.
sc0:  at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be 

bas 3.1 fails to build

[Derrick MacPherson]

On FreeBSD 5.4, not sure what this error means:

===>  Building for bash-3.1.10_1
rm -f bash
cc -L./builtins -L./lib/readline -L./lib/readline -L./lib/glob  -
L./lib/tilde  -L./lib/sh -L/usr/local/lib  -rdynamic  -O -pipe -o bash
shell.o eval.o y.tab.o general.o make_cmd.o print_cmd.o   dispose_cmd.o
execute_cmd.o variables.o copy_cmd.o error.o  expr.o flags.o jobs.o
subst.o hashcmd.o hashlib.o mailcheck.o  trap.o input.o unwind_prot.o
pathexp.o sig.o test.o version.o  alias.o array.o arrayfunc.o braces.o
bracecomp.o bashhist.o  bashline.o  list.o stringlib.o locale.o
findcmd.o redir.o  pcomplete.o pcomplib.o syntax.o xmalloc.o -lbuiltins
-lsh -lreadline -lhistory -ltermcap -lglob  -
ltilde  /usr/local/lib/libintl.so /usr/local/lib/libiconv.so
subst.o(.text+0x4f69): In function `remove_wpattern':
: undefined reference to `wcsmatch'
subst.o(.text+0x4fad): In function `remove_wpattern':
: undefined reference to `wcsmatch'
subst.o(.text+0x4fe6): In function `remove_wpattern':
: undefined reference to `wcsmatch'
subst.o(.text+0x5072): In function `remove_wpattern':
: undefined reference to `wcsmatch'
subst.o(.text+0x5107): In function `remove_pattern':
: undefined reference to `xdupmbstowcs'
subst.o(.text+0x5133): In function `remove_pattern':
: undefined reference to `xdupmbstowcs'
subst.o(.text+0x565a): In function `match_wpattern':
: undefined reference to `wcsmatch'
subst.o(.text+0x56fa): In function `match_wpattern':
: undefined reference to `wcsmatch'
subst.o(.text+0x576c): In function `match_wpattern':
: undefined reference to `wcsmatch'
subst.o(.text+0x57ad): In function `match_wpattern':
: undefined reference to `wcsmatch'
subst.o(.text+0x5878): In function `match_pattern':
: undefined reference to `xdupmbstowcs'
subst.o(.text+0x58a7): In function `match_pattern':
: undefined reference to `xdupmbstowcs'
*** Error code 1


___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Spamd keeps falling over

[Derrick MacPherson]

I have had spamd die about 3 times in the last couple days, this is what 
I saw in the logs this morning:


Mar 11 06:00:37 mail spamd[28178]: prefork: ordered child to accept, but 
child reported state '1' at 
/usr/local/lib/perl5/site_perl/5.8.8/Mail/SpamAssassin/Spam

dForkScaling.pm line 390


What does it mean?

Can I get some suggestions on an application that will monitor this 
process and if it dies restart it?

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: mysql install problems.

[Derrick MacPherson]

Derrick MacPherson wrote:

Trying to upgrade mysql from 40 to 50 on a 5.4 system. The client will 
update, but when I go to update the server, I get the following error. 
I was able to use pkg_add get 5.0.2 installed so at least it's 
functioning. I've tried to reinstall 40, and then deinstall, but it 
doesn't seem to help. What can I do?


===>  mysql-server-5.0.18_1 cannot install: the port wants 
mysql50-client and you try to install mysql40-client..

*** Error code 1

Stop in /usr/ports/databases/mysql50-server.

pkg_info |grep sql
bsdpan-DBD-mysql-2.9008 DBD::mysql - MySQL driver for the Perl5 
Database Interface
courier-authlib-mysql-0.57 MySQL support for the Courier 
authentication library

exim-mysql-4.60 High performance MTA for Unix systems on the Internet
mysql-client-5.0.18_1 Multithreaded SQL database (client)
mysql-server-5.0.2  Multithreaded SQL database (server)
php4-mysql-4.4.1_3  The mysql shared extension for php
proftpd-mysql-1.2.10_1 Highly configurable ftp daemon with MySQL support


I have done more digging and haven't gotten too far ahead. I did see 
someone had a similar problem a few weeks ago, but there was no posted 
solution. Anyone got some insight?

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

mysql install problems.

[Derrick MacPherson]

Trying to upgrade mysql from 40 to 50 on a 5.4 system. The client will 
update, but when I go to update the server, I get the following error. I 
was able to use pkg_add get 5.0.2 installed so at least it's 
functioning. I've tried to reinstall 40, and then deinstall, but it 
doesn't seem to help. What can I do?


===>  mysql-server-5.0.18_1 cannot install: the port wants 
mysql50-client and you try to install mysql40-client..

*** Error code 1

Stop in /usr/ports/databases/mysql50-server.

pkg_info |grep sql
bsdpan-DBD-mysql-2.9008 DBD::mysql - MySQL driver for the Perl5 Database 
Interface
courier-authlib-mysql-0.57 MySQL support for the Courier authentication 
library

exim-mysql-4.60 High performance MTA for Unix systems on the Internet
mysql-client-5.0.18_1 Multithreaded SQL database (client)
mysql-server-5.0.2  Multithreaded SQL database (server)
php4-mysql-4.4.1_3  The mysql shared extension for php
proftpd-mysql-1.2.10_1 Highly configurable ftp daemon with MySQL support

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Exim Question

[Derrick MacPherson]

you could create an alias, or a mailing list (mailman) and email it 

On Mon, 2005-12-12 at 08:44 +0200, Khaled Hussein wrote:
> Hi All
> 
>  
> 
> i am new to this group and i hope I can find answer for my question, 
> 
>  
> 
> I want to send mail from my Mail server to a list of emails on different
> domains I stored the list in text file and I tried this command 
> 
>  
> 
> Exim   [EMAIL PROTECTED] emails.txt < msg.txt but
> I got a delivery error that the [EMAIL PROTECTED] does not exist 
> 
>  
> 
> I want the software to read every email in the file so what should I do 
> 
>  
> 
> Please if any one have an idea give it to me please 
> 
>  
> 
> Thanks in advance
> 
> d
> 
>  
> 
> **
> Khaled J. Hussein 
> System Administrator   
> Palnet Communications Ltd.
> Hadara Technologies
> http://www.palnet.com 
> [EMAIL PROTECTED]
> Tel.02/2403434. Fax.02/2403430 
> **
> 
>  
> 
> ___
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "[EMAIL PROTECTED]"
> 

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: web based password control?

[Derrick MacPherson]

i'm not sure if it does, but check into usermin

On Fri, 2005-12-02 at 11:28 -0500, Louis J. LeBlanc wrote:
> Hey folks.
> 
> This is probably going to meet with a good number of warnings against this
> course of action, but I'm looking for a web based password utility.
> 
> I have a couple users that do not have access to set their passwords from
> outside my network (remote logins aren't permitted for most accounts).
> 
> Of course, I'm going to seriously limit the accessibility of the
> application, and make it altogether unavailable until it's actually needed
> and then only with a one time password on a secure connection.
> 
> Still, I'd like them to be able to set their passwords for sasl and shell
> accounts (sasl is used for IMAPS, which is allowed externally, shell
> passwords are used for IMAP, allowed only within the network by the
> webmail app, which is only accessible on a secure connection anyway).
> 
> I could probably whip up a mod_perl page easily enough, but before I
> bother, is there a port that will do this?  Preferably with proper
> password confirmations prior to changing them.
> 
> I've seen a couple (www/chpasswd was the closest) that suggested similar
> behavior, but I'm not sure any covered exactly my needs.
> 
> TIA
> Lou

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Yesterday's -STABLE kernel corrupts LAN

[Derrick MacPherson]

Chris wrote:


Derrick MacPherson wrote:
 


My friend posted late last night, on a problem we are seeing, Sub:
Problem with FreeBSD 6 -STABLE and Dell PowerEdge 2850 spewing arp requests

Pasted here:

Hi All,

I have a problem with FreeBSD 6 -Stable, i built the machine with
-RELEASE and it's been running fine for the last few weeks.. Today i
tryed to make the jump to -STABLE by running cvsup on the RELENG_6
branch, running makebuildworld/kernel
which built fine without any errors.. upon the first reboot the machine
did not come back up.. I went down to the data centre where the machine
is COLO'd and saw the machine  did boot the new kernel.. it just has no
network connectivity..

The Machine is a Dell PowerEdge 2850, Raid 1 volume on the Perc4i
controller.. there are 2 Intel 1000BT adaptors.. i poked around making
sure there were no errors in the syslog etc.. the machine comes up fine
as mentioned...
   



Yes - I can see running STABLE (or CURRENT for that matter) on a
production box makes perfect sence to me. Yes it does.
 

Wow, if I could use that sarcasm to fuel my car I'd be happy. I guess we 
would be the only people to run current or stable on a production 
machine, and everyone else is using RELEASE? I guess I should have stuck 
with 4.1x considering all the initial troubles with 5.x, and not go to 6 
at all cause heck that can't be near ready considering the obvious 
ineptitude of freebsd developers, the horrible track record speaks for 
itself. Or should I run RedHat? ;)


Just wanted to contribute to the discussion in a productive manner, and 
make sure people are aware of issues as well as solve our current issue, 
but thanks for your input nonetheless. I hope it's sunny over there 
today, cause it is here. Whoomp.

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Yesterday's -STABLE kernel corrupts LAN

[Derrick MacPherson]

Chris wrote:


P.U.Kruppa wrote:
 


On Sat, 26 Nov 2005, Chris wrote:

   


P.U.Kruppa wrote:

 


Hi,

I updated -STABLE yesterday and since my FreeBSD machine is set up as
gateway my home network broke down completely. I rebooted into last
weeks kernel and everything worked as usual.

Has anyone else seen this or have I been unlucky with my download?

   


Did you follow the instructions outlined on how to cvsup your system?
Did you forget a step? Do them out of order.

There is a reason it's documented the way it is on the FBSD site.
Mainly - becasue it works.

I'm sure then when you review what you have done - it's going to be
something you did wrong.
 


So you updated your system yesterday and your LAN is still working
correctly?

Regards,

Uli.
   



Mine works just dandy

 

My friend posted late last night, on a problem we are seeing, Sub: 
Problem with FreeBSD 6 -STABLE and Dell PowerEdge 2850 spewing arp requests


Pasted here:

Hi All,

I have a problem with FreeBSD 6 -Stable, i built the machine with 
-RELEASE and it's been running fine for the last few weeks.. Today i 
tryed to make the jump to -STABLE by running cvsup on the RELENG_6 
branch, running makebuildworld/kernel
which built fine without any errors.. upon the first reboot the machine 
did not come back up.. I went down to the data centre where the machine 
is COLO'd and saw the machine  did boot the new kernel.. it just has no 
network connectivity..


The Machine is a Dell PowerEdge 2850, Raid 1 volume on the Perc4i 
controller.. there are 2 Intel 1000BT adaptors.. i poked around making 
sure there were no errors in the syslog etc.. the machine comes up fine 
as mentioned...
and the only odd thing i found was 1) in the output of ps -aux there was 
over 100 IRQ's listed.. and 2) the network adapter is puking arp 
requests flooding the local network..


With no fix in sight i re-installed the source and base binary's from 
the installer which fixed the problem as the machine was back at 
-RELEASE.. it worked great.. i thought at first i may have had left over 
files in /usr/obj but from what i thought that should not affect the 
kernel build/install.. regardless i followed the handbook and removed 
the /usr/obj/usr dir and ran cvsup again to get the -STABLE source.. i 
ran make cleandir and started the process over again..
and once again after the kernel install the machine loses it's 
networking capabilities and starts spewing Arp requests...


Could anyone offer any insight?

Sorry about not having a dmesg but i dont have access to the machine at 
the moment as it's dead :P



Thanks

Rob.

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: PHP stopped working :(

[Derrick MacPherson]

no errors in the httpd-error.log?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: File Server Which would you choose?

[Derrick MacPherson]

On Fri, 2005-11-18 at 09:19 -0800, Sean Murphy wrote:
> I want to set up a FreeBSD file server and want to choose the 
> appropriate method.  The filesytems must be mounted on the client, 
> always available, and transparent to the user.
> 
> NFS for *nix to *nix only
> NIS for better management of NFS
> 
> Can OSX mount and respond to NFS/NIS?

Yes.

> What other OSs can use this?

Pretty much all of them, including Windows.

> Are user names and passwords encrypted?

no.

> Netatalk for FreeBSD to Appletalk Macs OS9 and X Only
> 
> What other OSs can use this?

*nix, and I think Windows with the right app. I think it's called Dave.
(Yes, really) 

> Are user names and passwords encrypted?

Not sure

> Samba for any *nix running samba, OS X, Windows Machines
> 
> Are user names and passwords encrypted?

can be.

> What other OSs can use this?

*nix, OSX, Windows, anything that can run samba

> Any thing for connecting to a Novell Server?
> NDS and Bindrey
> IPXSPX and TCP/IP
> 
> 
> Am I missing any?


I don't know anything about the Novell end of things, but I'd suggest if
you can use the OSX box to serve your files, it will talk NIS/NFS,
AD/SMB, and Appletalk for your OS9 boxes, 

OR

Windows as your server with the Services for Unix running, it will act
as a NIS master.

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Which firewall?

[Derrick MacPherson]

Sasa Stupar wrote:




--On 17. november 2005 18:19 +0800 Dinesh Nair <[EMAIL PROTECTED]> 
wrote:





On 11/17/05 18:15 Sasa Stupar said the following:


Hi!

I am about to set up a router with FBSD 5.4 for SOHO network. There 
will

be no servers running, only inet access for the users but I'd like to



you could try using m0n0wall, http://m0n0.ch/wall/

it's a freebsd 4.11 based system with a nice UI.



Hmmm, this looks interesting. 



very similiar to m0n0wall, just running on freebsd6 and with pf. not 
quite into beta, but will be soon

www.pfsense.org
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

multiple openvpn daemon startup

[Derrick MacPherson]

I'm wondering if anyone has, or can suggest how to have multiple openvpn
daemons start up from the rc.d/openvpn.sh script?


___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: setting a quotas default

[Derrick MacPherson]

On Mon, 2005-11-07 at 20:26 -0800, Derrick MacPherson wrote:
> i have proftpd getting users out of a mysql DB, and it's set to create 
> home dirs automaticaly; how do i get there to be a quota automaticaly be 
> placed on the users?



can this not be done?

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

setting a quotas default

[Derrick MacPherson]

i have proftpd getting users out of a mysql DB, and it's set to create 
home dirs automaticaly; how do i get there to be a quota automaticaly be 
placed on the users?

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Squirrelmail problem?

[Derrick MacPherson]

Julien Gabel wrote:


After a php update, i usually need to reinstall squirrelmail and its
dependancies using `portinstall -Rf -m "-DWITH_OPENSSL" squirrelmail'
just to be sure all is rebuild with the correct SSL support.
 



 


Done, but no help. Anyone?
   



Just to be sure, have you restart apache after the overall update?

These are the two steps done on my installation to get it to work
after these upgrade (php4 and apache2).  No more, no less...

 


yup. apache restarted. (it's 1.3)
I'm going to maybe try with php5 to see if that helps
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Squirrelmail problem?

[Derrick MacPherson]

Julien Gabel wrote:


After a php update, i usually need to reinstall squirrelmail and its
dependancies using `portinstall -Rf -m "-DWITH_OPENSSL" squirrelmail'
just to be sure all is rebuild with the correct SSL support.
 



Done, but no help. Anyone?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Squirrelmail problem?

[Derrick MacPherson]

Derrick MacPherson wrote:

I've got a box running 5.4p8, latest versions of courier imap, 
squirrelmail, and php 4.4.1. I'm seeing this issue; I can open message 
#1, I can't open any other messsages, I get a timeout and a blank 
page(plus the compose, address, etc).. other than that, I'm not sure 
where to go with this, any thoughts?



http is redirected to https - just in case that helps
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Squirrelmail problem?

[Derrick MacPherson]

I've got a box running 5.4p8, latest versions of courier imap, 
squirrelmail, and php 4.4.1. I'm seeing this issue; I can open message 
#1, I can't open any other messsages, I get a timeout and a blank 
page(plus the compose, address, etc).. other than that, I'm not sure 
where to go with this, any thoughts?

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Dell PE 830, Intel 82801 SATA Controller not recognized.

[Derrick MacPherson]

On Fri, 2005-10-21 at 13:14 -0700, Derrick MacPherson wrote:
> On Fri, 2005-10-21 at 11:39 -0700, Derrick MacPherson wrote:
> > As per the subject, Dell PE 830, with Intel 82801 SATA Controller that
> > is not recognized. Kind of. When I get to the boot loader, and type
> > lsdev, it shows the drive, recognizes the linux partitions that are on
> > it, but when I get to the sysinstall it says there's no drives found.
> > I've tried with 5.4 and 6.0rc1. Suggestions?
> 
> It seems like it's seen in the boot screen before sysinstall starts,
> though it rolls by too fast - is there a way to see that output?

reading handbook. got the scroll lock.

any suggestions for debugging this?

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Dell PE 830, Intel 82801 SATA Controller not recognized.

[Derrick MacPherson]

On Fri, 2005-10-21 at 11:39 -0700, Derrick MacPherson wrote:
> As per the subject, Dell PE 830, with Intel 82801 SATA Controller that
> is not recognized. Kind of. When I get to the boot loader, and type
> lsdev, it shows the drive, recognizes the linux partitions that are on
> it, but when I get to the sysinstall it says there's no drives found.
> I've tried with 5.4 and 6.0rc1. Suggestions?

It seems like it's seen in the boot screen before sysinstall starts,
though it rolls by too fast - is there a way to see that output?

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Dell PE 830, Intel 82801 SATA Controller not recognized.

[Derrick MacPherson]

As per the subject, Dell PE 830, with Intel 82801 SATA Controller that
is not recognized. Kind of. When I get to the boot loader, and type
lsdev, it shows the drive, recognizes the linux partitions that are on
it, but when I get to the sysinstall it says there's no drives found.
I've tried with 5.4 and 6.0rc1. Suggestions?


the linux hardware browser shows it as a 82801GB/GR/GH (ICH7 Family) and
I will add the CentOS dmesg for information sake.

Linux version 2.6.9-22.ELsmp ([EMAIL PROTECTED]) (gcc
version 3.4.4 20050721 (Red Hat3.4.4-2)) #1 SMP Sat Oct 8 19:11:43 CDT
2005
BIOS-provided physical RAM map:
 BIOS-e820:  - 000a (usable)
 BIOS-e820: 0010 - 7ffc (usable)
 BIOS-e820: 7ffc - 7ffcfc00 (ACPI data)
 BIOS-e820: 7ffcfc00 - 7000 (reserved)
 BIOS-e820: f000 - f400 (reserved)
 BIOS-e820: fec0 - fed00400 (reserved)
 BIOS-e820: fed13000 - feda (reserved)
 BIOS-e820: fee0 - fee1 (reserved)
 BIOS-e820: ffb0 - 0001 (reserved)
1151MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000fe710
NX (Execute Disable) protection: active
On node 0 totalpages: 524224
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 225280 pages, LIFO batch:16
  HighMem zone: 294848 pages, LIFO batch:16
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 DELL  ) @ 0x000fd160
ACPI: RSDT (v001 DELL   PE8300x0001 MSFT 0x010a) @
0x000fd174
ACPI: FADT (v001 DELL   PE8300x0001 MSFT 0x010a) @
0x000fd1b8
ACPI: MADT (v001 DELL   PE8300x0001 MSFT 0x010a) @
0x000fd22c
ACPI: SPCR (v001 DELL   PE8300x0001 MSFT 0x010a) @
0x000fd2a0
ACPI: HPET (v001 DELL   PE8300x0001 MSFT 0x010a) @
0x000fd2f0
ACPI: MCFG (v001 DELL   PE8300x0001 MSFT 0x010a) @
0x000fd328
ACPI: DSDT (v001 DELL   PE8300x0001 MSFT 0x010e) @
0x
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee0
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:4 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
Enabling APIC mode:  Flat.  Using 0 I/O APICs
ACPI: IOAPIC (id[0x02] address[0xfec0] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec0, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfec1] gsi_base[32])
IOAPIC[1]: apic_id 3, version 32, address 0xfec1, GSI 32-55
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
ACPI: HPET id: 0x base: 0xfed0
Using ACPI (MADT) for SMP configuration information
Built 1 zonelists
Kernel command line: ro root=LABEL=/ rhgb quiet
Initializing CPU#0
CPU 0 irqstacks, hard=c03e7000 soft=c03c7000
PID hash table entries: 4096 (order: 12, 65536 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 2073468k/2096896k available (1863k kernel code, 22404k reserved,
753k data, 176k init, 1179392k highmem)
Using HPET for base-timer
Using HPET for gettimeofday
Detected 2800.341 MHz processor.
Using hpet for high-res timesource
Calibrating delay loop... 5554.17 BogoMIPS (lpj=2777088)
Security Scaffold v1.0.0 initialized
SELinux:  Initializing.
SELinux:  Starting in permissive mode
There is already a security framework initialized, register_security
failed.
selinux_register_security:  Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: bfebfbff 2010  
CPU: After vendor identify, caps:  bfebfbff 2010  
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU0: Initial APIC ID: 0, Physical Processor ID: 0
CPU: After all inits, caps:bfebfbff 2010  0080
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 01
per-CPU timeslice cutoff: 2925.31 usecs.
task migration cache decay timeout: 3 msecs.
Booting processor 1/1 eip 3000
CPU 1 irqstacks, hard=c03e8000 soft=c03c8000
Initializing CPU#1
Calibrating delay loop... 5586.94 BogoMIPS (lpj=2793472)
CPU: After generic identify, caps: bfebfbff 2010  000

Dell Poweredge 830 with Intel ICH7 Sata controller not finding drives on install

[Derrick MacPherson]

When I type lsdev in the boot loader, it shows the hdd and the
partitions that are on it (3 linux). When sysinstall (i've tried with
5.4 and 6.0RC1) starts it says there's no drives, I've done some
googling but am not coming back with a lot, someone asked a similar
question in early August and there was no posted reply. Anyone know what
I can do to try and get this working, I would much much rather be
running freebsd than linux. 

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

[Fwd: Re: [Openvpn-users] Problems on FreeBSD and MacOSX (buffer space available)]

[Derrick MacPherson]

Forwarding to freebsd-questions:

There are 3 of us know that are having this same issue with OpenVPN and
FreeBSD. The thread starts here:

http://openvpn.net/archive/openvpn-users/2005-08/msg00356.html

Anyone else having this issue, or know of a fix?

 Forwarded Message 
From: Derrick MacPherson <[EMAIL PROTECTED]>
To: Sean Leach <[EMAIL PROTECTED]>
Cc: Michael Scheidell <[EMAIL PROTECTED]>, openvpn-
[EMAIL PROTECTED]
Subject: Re: [Openvpn-users] Problems on FreeBSD and MacOSX (buffer
space available)
Date: Wed, 21 Sep 2005 16:49:29 -0700
I'm having this same issue, and after updating my OS from 5.3 to latest
just to see if that would help. no go.

any solution? Since we now have 3 instances of this, can we get any
others in FreeBSD to take a look ?

On Fri, 2005-08-26 at 15:18 -0700, Sean Leach wrote:
> As I mention, I am using openvpn 2.0.2 on the FreeBSD machine.  Same  
> problem.
> 
> openvpn --version
> OpenVPN 2.0.2 i386-unknown-freebsd5.3 [SSL] [LZO] built on Aug 26 2005
> Developed by James Yonan
> Copyright (C) 2002-2005 OpenVPN Solutions LLC <[EMAIL PROTECTED]>
> 
> 
> On Aug 26, 2005, at 2:45 PM, Michael Scheidell wrote:
> 
> > See notes on openvpn release 2.0.2 . Fixes network buffer problems in
> > *BSD systems.
> >
> >
> >
> > ---
> > SF.Net email is Sponsored by the Better Software Conference & EXPO
> > September 19-22, 2005 * San Francisco, CA * Development Lifecycle  
> > Practices
> > Agile & Plan-Driven Development * Managing Projects & Teams *  
> > Testing & QA
> > Security * Process Improvement & Measurement * http://www.sqe.com/ 
> > bsce5sf
> > ___
> > Openvpn-users mailing list
> > [EMAIL PROTECTED]
> > https://lists.sourceforge.net/lists/listinfo/openvpn-users
> >
> 
> 
> 
> ---
> SF.Net email is Sponsored by the Better Software Conference & EXPO
> September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
> Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
> Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
> ___
> Openvpn-users mailing list
> [EMAIL PROTECTED]
> https://lists.sourceforge.net/lists/listinfo/openvpn-users
> 



---
SF.Net email is sponsored by:
Tame your development challenges with Apache's Geronimo App Server. 
Download it for free - -and be entered to win a 42" plasma tv or your very
own Sony(tm)PSP.  Click here to play: http://sourceforge.net/geronimo.php
___
Openvpn-users mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/openvpn-users


___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Command not in PATH when just installed?

[Derrick MacPherson]

depending on your shell, you may need to type rehas - then it will see
the command. If you use bash, it should 'just work'

On Thu, 2005-09-15 at 12:35 -0400, Ugo Bellavance wrote:
> Hi there,
> 
>   I'm new on this list.  I tried looking at the archive, but I didn't
> know how to formulate my search.  Here is my question:
> 
> I install a package using pkg_add. Then I try running the command, but
> it doesn't work.  I logout, I login, then it works.  Is this a FAQ or a
> setting?
> 
> Thanks,

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: traffic accounting.

[Derrick MacPherson]

On Tue, 2005-09-13 at 23:11 -0400, Peter Matulis wrote:
> ---  <[EMAIL PROTECTED]>Erik Nørgaard wrote:
> 
> > Derrick MacPherson wrote:
> > > I am going to pop a machine (bridged interfaces) in tween our LAN and
> > > our firewall (pix) and am wanting to know what people would recommend
> > > for IP accounting, it would be great to have a web based output to show
> > > what traffic, from/to what hosts so the boss is happy to look at it.
> 
> Are you searching for something that looks good or something more factual?

Probably more pretty than extremely accurate. I've actually mirrored a
port on the switch that's to our internet connection, and have ntop
monitoring that. Seems to be working fine, I guess I would like a bit
more of a warm fuzzy feeling that what i'm doing is right.

> Another question to consider is whether you are interested in bandwidth
> (bytes/sec) or in actual bytes transferred.  There are fewer tools that 
> provide
> persistent & archivable stats for the latter and I have yet to find one that
> displays the latter in graphical form without it becoming a science project.

bytes transfered is better, but both appreciated. And ya, it seems like
there's a few solutions, none perfect. I am pushing for the replacement
of our Pix's, my preference is PF on *BSD, but again, they want
something that looks pretty.

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

traffic accounting.

[Derrick MacPherson]

I am going to pop a machine (bridged interfaces) in tween our LAN and
our firewall (pix) and am wanting to know what people would recommend
for IP accounting, it would be great to have a web based output to show
what traffic, from/to what hosts so the boss is happy to look at it.

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Pine alternative?

[Derrick MacPherson]

Try using Cone.

On Thu, 2005-08-25 at 12:25 -0500, Joe Auty wrote:
> If you plan to use the Maildir format, while it's possible for Pine  
> to support this, it doesn't natively... Mutt does.
> 
> On Aug 25, 2005, at 10:51 AM, Svein Halvor Halvorsen wrote:
> 
> >
> > * Sean Murphy [2005-08-25 08:47 -0700]
> >
> >>  We have been using pine for years on our Sun Solaris box.  We are  
> >> in the
> >>  process of moving to FreeBSD.  I installed Pine from an updated  
> >> ports
> >>  collection and received a message about pine not being very  
> >> secure.  Is
> >>  anyone using an alternative to pine that can also read pine's  
> >> folders and
> >>  addresses?  I need it to be compatible as we still have many  
> >> users with lots
> >>  of data in pine.
> >>
> >
> >
> > I guess mutt would do. But be aware that the notice is warning you  
> > about
> > Pine's previous security history. All known security holes are  
> > fixed, and
> > if you plan on keeping your system up-to-date (by e.g keeping track of
> > portaudit etc), you should be alright.
> >
> >
> > Svein Halvor
> > ___
> > freebsd-questions@freebsd.org mailing list
> > http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> > To unsubscribe, send any mail to "freebsd-questions- 
> > [EMAIL PROTECTED]"
> >
> 
> ___
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "[EMAIL PROTECTED]"
> 

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Re[2]: problem with vsftpd. filesystem full

[Derrick MacPherson]

you should just move your ftp root to /usr somewhere.

On Wed, 2005-08-17 at 22:40 +0300, vladone wrote:
> # du -h
> 
> Filesystem SizeUsed   Avail Capacity  Mounted on
> /dev/ad1s1a248M228M200K   100%/
> devfs  1.0K1.0K  0B   100%/dev
> /dev/ad1s1e248M 12K228M 0%/tmp
> /dev/ad1s1f 36G1.4G 32G 4%/usr
> /dev/ad1s1d248M 35M193M15%/var
> devfs  1.0K1.0K  0B   100%/var/named/dev
> 
> My ftp directory is in root, but i can see there is no more free space.
> I want to resize partitons in same slice. How i can do this?
> 
> 
> 
> 
> 
> ___
> freebsd-questions@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "[EMAIL PROTECTED]"
> 

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: How to use Webmin in FreeBSD?

[Derrick MacPherson]

Kenny wrote:

I have installed Webmin successfully from ports. During the
installation, there was no error occurred.

After the installation, I tried to use Webmin. I typed the following
address in the Opera navigation bar:

http://localhost:1/

Then, I was told by my Opera that there was an error while loading. It
could not connect to the remote host.


Did you run the setup script?

/usr/local/lib/webmin/setup.sh

have this in your rc.conf?
webmin_enable="YES"

is it running?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Any suggestions for a MTA for a new admin?

[Derrick MacPherson]

On Thu, 2005-08-11 at 17:40 -0400, Tom Norris wrote:
> I have finally made the jump from paying people to host my websites to 
> doing it myself (setting up apache, perl, php, postgresql, and all that 
> fun stuff.)  Now I want to migrate my e-mail addresses over to a FreeBSD 
> 4.11 machine that lives in a data center.  Can any of you recommend a 
> good MTA (and maybe a book) for someone that knows relatively few things 
> about the big scary world of e-mail transport?
> 
> Just to throw it out there, one of the things I need to do is to have 
> the MTA route mail for a few different domains that are pointed towards 
> the machine on different ip addresses.  Is that possible?

Exim rocks I've used it for about 8 years.. Postfix is excellent I've
looked at it and it seems pretty easy to work with, I think some may
like it better as it can be administered through webmin (exim you
can't), especially if you want to give some admin privileges. Sendmail's
configuration is not trivial.

I much prefer using Maildir to store mail, works much better when
dealing with a lot of users with a lot of mail.

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: which radius server (elaboration)

[Derrick MacPherson]

On Tue, 2005-08-09 at 09:45 -0700, Derrick MacPherson wrote:
> our windows radius server went down, i'm just going to install it on a
> freebsd box, which radius server do people recommend? I see there's a
> least 3 in the ports...

It will authenticate to a w2k server.


___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

which radius server

[Derrick MacPherson]

our windows radius server went down, i'm just going to install it on a
freebsd box, which radius server do people recommend? I see there's a
least 3 in the ports...

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

adduser re-writting groups file incorrectly

[Derrick MacPherson]

I have a 4.10 machine thats our internal mailserver. we use NIS for the
accounts, we add a couple local accounts just in case NIS can't be
contacted... We had our software developers make a change to all users
PATH, part of which points to a different version of the su command,
which we've since discovered doesn't work under fbsd (linux all over
here, but i'm trying to change it), that change was made without my
knowing. While I was out for lunch one the admins tried to su and
couldn't, they assumed they needed a local account, so they used the
adduser script to add a user. the next available UID was taken for the
account and when the account was created I think it errored on creating
the home dir, because it happened to clash with a UID out of NIS. The
big kafuffle out of this is that it wrote the group file with the NIS
entry written at the top, which caused mail to stop working as it was
picking up the wrong UID for mail out of NIS. I was able to recreate
this once, but not in 3 more attempts. I guess this isn't a question
just a comment I wanted to toss out there...

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: squid.conf (More info on what's not working)

[Derrick MacPherson]

wbinfo works, i can get responses as i expect.

wbinfo_group.pl works as expected.

wb_* all fail and in the log.winbindd I see:

[2005/08/03 15:10:41, 0] nsswitch/winbindd.c:process_loop(748)
  process_loop: Invalid request size from pid 20068: 1304 bytes sent,
should be 1824
  This usually means that you are running old wbinfo, pam_winbind or
libnss_winbind clients


installed are:
samba-3.0.14a_1,1
squid-2.5.10_4

Any ideas on how to deal with this?



___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

squid.conf

[Derrick MacPherson]

can anyone who has squid authenticating using samba3 please let me take
a peek at their config?

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: squid config: which ntlm_auth do I use? and win

[Derrick MacPherson]

On Wed, 2005-08-03 at 14:09 -0500, Dan Nelson wrote:
> In the last episode (Aug 03), Derrick MacPherson said:
> > there's 
> > /usr/local/libexec/squid/ntlm_auth
> > and
> > /usr/local/bin/ntlm_auth
> > 
> > how are they different and which one do i use?  why is there 2?
> 
> My guess is that you forgot to uninstall a previous version of squid,
> and /usr/local/bin/ntlm_auth is old and should be removed.


In my squid.conf:

this works for non IE browsers, IE fails:

auth_param ntlm program /usr/local/bin/ntlm_auth --helper-
protocol=squid-2.5-ntlmssp
auth_param basic program /usr/local/bin/ntlm_auth --helper-
protocol=squid-2.5-basic

(IE fails with: authenticateNTLMHandleReply: Error validating user via
NTLM. Error returned 'BH NT_STATUS_ACCESS_DENIED')


Won't start when using:

auth_param ntlm program /usr/local/libexec/squid/ntlm_auth 
auth_param basic program /usr/local/libexec/squid/ntlm_auth

I've tried adding the windows domain name and server IP after like:
domainname/x.x.x.x and it doesnt start as well.

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

squid config: which ntlm_auth do I use? and win

[Derrick MacPherson]

there's 
/usr/local/libexec/squid/ntlm_auth
and
/usr/local/bin/ntlm_auth

how are they different and which one do i use?  why is there 2?

Since there's 2 of these commands which are different, I think I've dug
myself into a confused hole, cause I think i've got my config messed
from trying various syntax




___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Freebsd testing with squid. User authentication works, now trying to get group based auth

[Derrick MacPherson]

as the subject says, when I try to test group auth, I get:

/usr/local/libexec/squid/wb_group -d
/wb_group[19095](wb_check_group.c:344): External ACL winbindd group
helper build Jul 27 2005, 17:33:37 starting up...
/wb_group[19095](wb_check_group.c:308): Can't contact winbindd. Dying

proxy1# ps -axu|grep win
root  18826  0.0  0.4  7100  4224  ??  Ss9:21AM
0:00.05 /usr/local/sbin/winbindd
root  18827  0.0  0.4  6044  3720  ??  I 9:21AM
0:00.00 /usr/local/sbin/winbindd


Where can I start checking?


___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: Squid. No not Squidward. and FreeBSD

[Derrick MacPherson]

On Tue, 2005-07-26 at 20:59 -0400, Chuck Swiger wrote:
> Derrick MacPherson wrote:
> > Is there a document about setting up squid, optimization suggestions etc
> > available somewhere? I've started looking and not come back with much
> > that's new.
> 
> Squid has reams of documentation available at www.squid-cache.org...?
> 

Yes they do, I was hoping to find a more freebsd specific document in
regards to customizing the kernel or any other bits on the machine. I
did find one document that looked promising, not sure where I got that
now. Thanks Chuck.

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Squid. No not Squidward. and FreeBSD

[Derrick MacPherson]

Is there a document about setting up squid, optimization suggestions etc
available somewhere? I've started looking and not come back with much
that's new.

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: KDE INSALL

[Derrick MacPherson]

On Tue, 2005-05-17 at 14:38 -0400, jean-paul natola wrote:
> Well  since i'm totally new to this, I wanted some type of gui,
> 
> the machine specs are 450 mhz with 256 ram
> 
> so I guess I should remove the kde install??
> 
> I have verified  my reverse DNS  and it all checks out, and when I 
> subscribed I did get the  confirmation request from the list and activated 
> it,  all I have been receiving  delayed delivery messages,,,
> 
> 
> 
> 
> >From: Toomas Aas <[EMAIL PROTECTED]>
> >To: jean-paul natola <[EMAIL PROTECTED]>
> >CC: [EMAIL PROTECTED]
> >Subject: Re: KDE INSALL
> >Date: Tue, 17 May 2005 21:23:34 +0300
> >
> >jean-paul natola wrote:
> >
> >>I ran  make install clean for  kde  and after 4 days i *think* I'm almost 
> >>done,,
> >>
> >>I am now at a promt for GNU ghostscript drivers and have NO CLUE as to 
> >>what to select , my purpose for the FREEBSD install is to run mailscanner  
> >>,  what should I select , if any, for the GNU ghostscritp driver 
> >>selection.
> >
> >If all you're concerned with is the mailscanner, it doesn't matter at all 
> >what you select here. Just accept the defaults.
> >
> >However, if all you're concerned with is the mailscanner, why are you 
> >installing KDE at all? Typical mail scanning software doesn't need KDE, and 
> >it sounds like you have a machine that is too slow anyway to run KDE in any 
> >usable manner (if 'make install' is still not done after 4 days).
> >
> >>PS ;  any reason I would be unable to post from legitimate work email?
> >
> >Do you get an error message back when you try to post? I understand that 
> >FreeBSD.org's mail server only accepts messages from hosts that have proper 
> >reverse DNS defined. This may be your problem, or it may be something else 
> >:)

Pretty much everything you will need/want to do, will be done through a
shell, so you needn't use a gui

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: creating a local cvsup mirror.

[Derrick MacPherson]

On Mon, 2005-05-02 at 17:13 -0700, Derrick MacPherson wrote:
> I want to create a local mirror for my internal freebsd systems. I seem
> to be confusing articles that are 'how to mirror' and 'how to be a
> mirror'. Is there some details/info out there that could be of help? I
> would have thought it would be enough to be running ports/net/cvsup-
> mirror would be enough on the server, and then the clients here would
> use 'cvsup -h my_cvs_server ports-all' but I end up seeing:
> May  2 12:40:49 cvs cvsupd[57822]: =3 Unknown collection "ports-all"
> 
> So if someone can clarify/point/whatever, much appreciated.


Hmm. OK worked this time no problem.

my next Q, is what do I need to do to enable my 5.X box have the source
for a 4.X box?

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

creating a local cvsup mirror.

[Derrick MacPherson]

I want to create a local mirror for my internal freebsd systems. I seem
to be confusing articles that are 'how to mirror' and 'how to be a
mirror'. Is there some details/info out there that could be of help? I
would have thought it would be enough to be running ports/net/cvsup-
mirror would be enough on the server, and then the clients here would
use 'cvsup -h my_cvs_server ports-all' but I end up seeing:
May  2 12:40:49 cvs cvsupd[57822]: =3 Unknown collection "ports-all"

So if someone can clarify/point/whatever, much appreciated.

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: cvsup-mirror and my other local servers

[Derrick MacPherson]

On Fri, 2005-04-22 at 15:50 -0700, Kent Stewart wrote:
> On Friday 22 April 2005 03:08 pm, Derrick MacPherson wrote:
> > On Fri, 2005-04-22 at 09:27 -0700, Derrick MacPherson wrote:
> > > I have about 8 freebsd boxes, I am using one with the ports
> > > cvsup-mirror as the central cvs source for my other boxes, but when
> > > I point them at the master cvs server I get this error:
> > >
> > > cvsup -h cvs stable-supfile
> > > Connected to cvs
> > > Server message: Unknown collection "src-all"
> > > Skipping collection src-all/cvs
> > > Finished successfully
> > >
> > > and in the server logs:
> > > Apr 22 09:22:15 cvs cvsupd[24459]: +8 [EMAIL PROTECTED]
> > > [SNAP_16_1h/17.0]
> > > Apr 22 09:22:15 cvs cvsupd[24459]: =8 Unknown collection "src-all"
> > > Apr 22 09:22:16 cvs cvsupd[24459]: -8 [0Kin+0Kout] Finished
> > > successfully
> > >
> > > I think i'm missing something quite small, but can't google what
> > > looks like a correct answer. I've not changed configuration much
> > > beyond the initial default installation config. Can someone point
> > > me in the right direction?
> > >
> > > cvs# uname -a
> > > FreeBSD cvs.mainframe.ca 5.3-RELEASE FreeBSD 5.3-RELEASE #5
> > >
> > > Also, if I'm to set up a cvs server for my 4.1X boxes, can i use
> > > the same server? if so how do I differentiate the 2 distros? And
> > > what about ports, are they the same for 4.x and 5.x?
> >
> > Any suggestions on this one? I'm heading off in a couple hours for
> > vacation for a week, and was hoping to have this working by the end
> > of the day.
> >
> 
> I have a mirror but all I had to do is replace the host in the cvsup 
> file with my local computer running cvsupd.


Thats what I did as well, using the /usr/share/examples/cvsup/ cvsup
files that i've always used. Is that wrong?

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: cvsup-mirror and my other local servers

[Derrick MacPherson]

On Fri, 2005-04-22 at 09:27 -0700, Derrick MacPherson wrote:
> I have about 8 freebsd boxes, I am using one with the ports cvsup-mirror
> as the central cvs source for my other boxes, but when I point them at
> the master cvs server I get this error:
> 
> cvsup -h cvs stable-supfile
> Connected to cvs
> Server message: Unknown collection "src-all"
> Skipping collection src-all/cvs
> Finished successfully
> 
> and in the server logs:
> Apr 22 09:22:15 cvs cvsupd[24459]: +8 [EMAIL PROTECTED]
> [SNAP_16_1h/17.0]
> Apr 22 09:22:15 cvs cvsupd[24459]: =8 Unknown collection "src-all"
> Apr 22 09:22:16 cvs cvsupd[24459]: -8 [0Kin+0Kout] Finished successfully
> 
> I think i'm missing something quite small, but can't google what looks
> like a correct answer. I've not changed configuration much beyond the
> initial default installation config. Can someone point me in the right
> direction?
> 
> cvs# uname -a
> FreeBSD cvs.mainframe.ca 5.3-RELEASE FreeBSD 5.3-RELEASE #5
> 
> Also, if I'm to set up a cvs server for my 4.1X boxes, can i use the
> same server? if so how do I differentiate the 2 distros? And what about
> ports, are they the same for 4.x and 5.x?

Any suggestions on this one? I'm heading off in a couple hours for
vacation for a week, and was hoping to have this working by the end of
the day. 

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: cvsup-mirror and my other local servers

[Derrick MacPherson]

On Fri, 2005-04-22 at 16:14 -0700, Kent Stewart wrote:

>CUT<

> There is a lot of stuff that comes along but here is what I do. I have a 
> script file called upstable. It looks like
> 
> # m upstable
> #! /bin/sh
> cd /root/cvsup
> #cvsup -g -L 2 4.x-stable-supfile 2>&1 | tee cvsup.log
> cvsup -g -L 2 stable-supfile 2>&1 | tee /var/log/build/cvsup.log
> 
> cd /var/log/build/
> 
> # Now convert the log to html`
> cvsuplog < cvsup.log > cvsup-`date "+%Y%m%d-%H%M"`.html
> 
> Now /root/cvsup/stable-supfile looks like
> 
> # cat stable*
> # $FreeBSD: src/share/examples/cvsup/stable-supfile
> # IMPORTANT: Change the next line to use one of the CVSup mirror sites
> # listed at http://www.freebsd.org/handbook/mirrors.html.
> #*default host=cvsup16.freebsd.org
> *default host=crystal
> *default base=/usr
> *default prefix=/usr
> *default release=cvs tag=RELENG_4
> *default delete use-rel-suffix
> 
> # If your network link is a T1 or faster, comment out the following 
> line.
> #*default compress
> 
> ## Main Source Tree.
> #
> src-all
> 

K. I'm mirroring the freebsd cvs to an internal machine by using the
ports cvsup-mirror, so as far as I can tell thats the only difference.
How does that change what the cvs server is telling the client is
available? and is using cvsup-mirror not a good idea for this?

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

cvsup-mirror and my other local servers

[Derrick MacPherson]

I have about 8 freebsd boxes, I am using one with the ports cvsup-mirror
as the central cvs source for my other boxes, but when I point them at
the master cvs server I get this error:

cvsup -h cvs stable-supfile
Connected to cvs
Server message: Unknown collection "src-all"
Skipping collection src-all/cvs
Finished successfully

and in the server logs:
Apr 22 09:22:15 cvs cvsupd[24459]: +8 [EMAIL PROTECTED]
[SNAP_16_1h/17.0]
Apr 22 09:22:15 cvs cvsupd[24459]: =8 Unknown collection "src-all"
Apr 22 09:22:16 cvs cvsupd[24459]: -8 [0Kin+0Kout] Finished successfully

I think i'm missing something quite small, but can't google what looks
like a correct answer. I've not changed configuration much beyond the
initial default installation config. Can someone point me in the right
direction?

cvs# uname -a
FreeBSD cvs.mainframe.ca 5.3-RELEASE FreeBSD 5.3-RELEASE #5

Also, if I'm to set up a cvs server for my 4.1X boxes, can i use the
same server? if so how do I differentiate the 2 distros? And what about
ports, are they the same for 4.x and 5.x?

thanks.



___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: FreeBSD 4-10 install, RAM parity errors that don't seem to happen inLinux.

[Derrick MacPherson]

On Mon, 2004-06-14 at 11:19, Charles Swiger wrote:
> On Jun 14, 2004, at 1:38 PM, Derrick MacPherson wrote:
> > Derrick MacPherson  mainframe.ca> writes:
> >> I am trying to move as much of our servers as I can to FreeBSD, and
> >> there's a few boxes that they have here that the RAM is a about 2 mm
> >> high and requires the case (1U machines) to press on the RAM when
> >> closed. These machines run RH Linux for months without a problem, yet 
> >> 3
> >> out of 4 I just pulled are giving RAM parity problems during FreeBSD
> >> instalation.
> >>
> >> Does FreeBSD not allow/recover from those types of errors the same way
> >> Linux does? Any solutions?
> >
> > I posted this last week and hadn't seen a repsonse to it, is there 
> > someone that
> > cares to take a poke at this?
> 
> Well, if you are using ECC, normally they will correct all single-bit 
> errors and notice but not correct larger multibit errors.  This is done 
> at a fairly low level in the hardware (which is why the BIOS typically 
> controls the use of ECC), and is not something that is supposed to vary 
> depending on which OS you are using.
> 
> That being said, Linux and FreeBSD might be using different portions of 
> memory which hit different RAM chips, and so you see the errors for one 
> and not the other, but if you've got failing RAM, your systems are not 
> going to be stable under heavy load regardless of what OS you use.  I 
> would expect you to see signs of problems under Linux, too, but 
> consider running memtest86 for a day or so and see what you see:
> 
> http://www.memtest86.com/

Thanks Chuck I will look into running those tests. The machines have had
heavy loads for a couple years now, they have served as rendering
machines for our animators. They are now being put to pasture, and I was
hoping to run FreeBSD, :), and not Linux, :(

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Re: FreeBSD 4-10 install, RAM parity errors that don't seem to happen inLinux.

[Derrick MacPherson]

Derrick MacPherson  mainframe.ca> writes:

> 
> I am trying to move as much of our servers as I can to FreeBSD, and
> there's a few boxes that they have here that the RAM is a about 2 mm
> high and requires the case (1U machines) to press on the RAM when
> closed. These machines run RH Linux for months without a problem, yet 3
> out of 4 I just pulled are giving RAM parity problems during FreeBSD
> instalation. 
> 
> Does FreeBSD not allow/recover from those types of errors the same way
> Linux does? Any solutions?
> 

I posted this last week and hadn't seen a repsonse to it, is there someone that
cares to take a poke at this? Just wondering if there's some form of memory
checking that's going on that Linux would not have, or not have turned on by
default. This is failry important as I would MUCH rther be running FreeBSD 4.10
than RedHat 9.

Derrick

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

FreeBSD 4-10 install, RAM parity errors that don't seem to happen in Linux.

[Derrick MacPherson]

I am trying to move as much of our servers as I can to FreeBSD, and
there's a few boxes that they have here that the RAM is a about 2 mm
high and requires the case (1U machines) to press on the RAM when
closed. These machines run RH Linux for months without a problem, yet 3
out of 4 I just pulled are giving RAM parity problems during FreeBSD
instalation. 

Does FreeBSD not allow/recover from those types of errors the same way
Linux does? Any solutions?

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

A project that requires a 'heartbeat' type application

[Derrick MacPherson]

I've been asked to go ahead with a project that will require me to build
several machines, 2 of which are to be used for mysql, one being 'live'
and writeable, the other being a read only backup server. The developers
are Linux people that are used to using an application called hearbeat
that does failover, and I am wondering what I can do in freebsd that is
similiar, if my mysql live server dies, the backup server takes over. I
browsed ports but there's so much there I may be missing something. 

thanks for any input.


___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

RE: mail client question...

[Derrick MacPherson]

Exim is an MTA not a MUA 

> -Original Message-
> From: [EMAIL PROTECTED] 
> [mailto:[EMAIL PROTECTED] On Behalf Of Xpression
> Sent: Wednesday, 18 February 2004 10:13
> To: FreeBSD-questions
> Subject: mail client question...
> 
> Hi list, anyone are using exim as a MUA ??? I can't 
> configure it to send mails, or anyone know a very easy 
> configurable mail client for FreeBSD ??? Thanks in advance...
> 
> ___
> [EMAIL PROTECTED] mailing list 
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to 
> "[EMAIL PROTECTED]"
> 

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

RE: Routing question -- Samba

[Derrick MacPherson]

You can do that within the smb.conf

Use SWAT, advanced options, I think just for the share... 

> -Original Message-
> From: [EMAIL PROTECTED] 
> [mailto:[EMAIL PROTECTED] On Behalf Of 
> Marius Kirschner
> Sent: Monday, 9 February 2004 12:40
> To: [EMAIL PROTECTED]
> Subject: Routing question -- Samba
> 
> I have a 4.9 box that's on a public IP and I want to 
> configure Samba so it only accepts connections from the 
> private network (192.168.1).  My question is, can I do that 
> with only 1 NIC card or do I have to add a second NIC for the 
> private LAN?
> 
> ---Marius 
> 
> ___
> [EMAIL PROTECTED] mailing list 
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to 
> "[EMAIL PROTECTED]"
> 

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Error in messages.

[Derrick MacPherson]

I started seeing this today:

Feb  4 07:00:00 mail /kernel: (da1:ahc0:0:2:0): READ(10). CDB: 28 0 2 c 1 5f
0 0 10 0 
Feb  4 07:00:00 mail /kernel: (da1:ahc0:0:2:0): MEDIUM ERROR info:20c0168
asc:11,0
Feb  4 07:00:00 mail /kernel: (da1:ahc0:0:2:0): Unrecovered read error
sks:80,35

I umounted the disk, dumped it's contents to a spare disk.

Can you suggest some tests for this drive, or should I just get it replaced?

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

RE: Can FreeBSD be a PDC for microsoft machines?

[Derrick MacPherson]

http://www.samba.org

It's in the ports, but you can read about it at the website first 

> -Original Message-
> From: [EMAIL PROTECTED] 
> [mailto:[EMAIL PROTECTED] On Behalf Of 
> L.I. Benjamín Guerrero Del Angel
> Sent: Saturday, January 31, 2004 8:03 PM
> To: [EMAIL PROTECTED]
> Subject: Can FreeBSD be a PDC for microsoft machines?
> 
> I am a new user about FreeBSD, I have installed two computers 
> with this OS and I think is good.
> 
> I want to know if FreeBSD can operate as a Primary Domain 
> Controller in a Network, because where I live everybody has 
> microsoft computers so I want to use FreeBSD as server 
> instead Windows NT o 2000.
> 
> If you know how to do that, plaese let me know. Or tell me 
> what to read about.
> 
> Thank you!
> 
> Benjamin Guerrero
> Reynosa, Tamaulipas Mexico
> ___
> [EMAIL PROTECTED] mailing list 
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to 
> "[EMAIL PROTECTED]"
> 

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

RE: SpamAssassin quits after upgrade

[Derrick MacPherson]

Can you post some of your exim logs to show what's failing? 

> -Original Message-
> From: [EMAIL PROTECTED] 
> [mailto:[EMAIL PROTECTED] On Behalf Of Mike Oliveri
> Sent: Friday, January 30, 2004 8:08 PM
> To: [EMAIL PROTECTED]
> Subject: SpamAssassin quits after upgrade
> 
> Hi all,
> 
> I've recently upgraded both Exim (to 4.30) and SpamAssassin 
> (to 2.63) on my FreeBSD 5.1 box via their Ports, and suddenly 
> I can no longer get SpamAssassin to work. If I enable spam 
> scanning in Exim (the FreeBSD port includes the Exiscan-acl 
> patch), none of my mail is delivered. If I comment out the 
> lines pertaining to SpamAssassin scanning, everything works 
> fine again.
> 
> Has anyone else run into this problem, and hopefully resolved it?
> 
> Thank you,
> Mike Oliveri
> [EMAIL PROTECTED]
> 
> ___
> [EMAIL PROTECTED] mailing list 
> http://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to 
> "[EMAIL PROTECTED]"
> 

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

PHP4 with GD build problem.

[Derrick MacPherson]

Freebsd 4.7, ports up to date.

When I compile php4 with GD, I get this error:

ext/gd/libgd/gdkanji.lo: In function `do_convert':
ext/gd/libgd/gdkanji.lo(.text+0x57b): undefined reference to `iconv_open'
ext/gd/libgd/gdkanji.lo(.text+0x5c8): undefined reference to `iconv'
ext/gd/libgd/gdkanji.lo(.text+0x5f9): undefined reference to `iconv_close'
*** Error code 1

Stop in /usr/ports/lang/php4/work/php-4.3.4.


It compiles fine without GD. Any ideas what's wrong, and how to fix?

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

RE: Trying to compile sophie, configure issue with ld

[Derrick MacPherson]

> -Original Message-
> From: Daniela [mailto:[EMAIL PROTECTED] 
> Sent: Tuesday, 27 January 2004 13:47
> To: Derrick MacPherson; [EMAIL PROTECTED]
> Subject: Re: Trying to compile sophie, configure issue with ld
> 
> On Tuesday 27 January 2004 20:38, Derrick MacPherson wrote:
> > I am pretty sure this is something wrong on my system's 
> part, but I am 
> > not 100% sure what to do about it..
> >
> > When I try and run configure, it fails, here's what it says in the 
> > config.log
> >
> >
> > configure:3866: result: /usr/local/lib
> > configure:3875: checking for SAVIsweepFile in -lsavi
> > configure:3906: gcc -o conftest -g -O2 -Wall   -Wl,--strip-all
> > -Wl,-rpath,/usr/local/lib -L/usr/local/lib -lrt conftest.c 
> -lsavi   >
> > &5
> > /usr/libexec/elf/ld: cannot find -lrt
> > configure:3909: $? = 1
> 
> Enter this in the shell and post the result:
> locate librt


/usr/compat/linux/lib/librt-2.1.2.so
/usr/compat/linux/lib/librt.so.1
/usr/ports/net/osrtspproxy/files/patch-librtsp-Makefile.in

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Trying to compile sophie, configure issue with ld

[Derrick MacPherson]

I am pretty sure this is something wrong on my system's part, but I am not
100% sure what to do about it..

When I try and run configure, it fails, here's what it says in the
config.log


configure:3866: result: /usr/local/lib
configure:3875: checking for SAVIsweepFile in -lsavi
configure:3906: gcc -o conftest -g -O2 -Wall   -Wl,--strip-all
-Wl,-rpath,/usr/local/lib -L/usr/local/lib -lrt conftest.c -lsavi   >
&5
/usr/libexec/elf/ld: cannot find -lrt
configure:3909: $? = 1


Anyone help with that ld error?

___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"

Help with lost partition info.

[Derrick MacPherson]

I lost my partition info during an upgrade. I never actually wnet ahead
with the upgrade, yet but I guess I overwrote the info that says whre my
partitions are mounted, and I'm unsure whichi is which.. I don't want to
map / to the wrong partition and have the /etc/master.passwd and other
important files overwritten. I have the latest boot floppies, and I can
get to sysinstall - I'm wondering if there is a way to get the proper info
off the disks?  I have a large partition that I can overwrite if it's
worth doing a minimal install to that partition to read teh origional
fstab file, but is there a easier or better way? I have to get this back
up ASAP, so anything that is quick and easy (HA!) would be great...

Thanks.


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-questions" in the body of the message