A couple of questions about 7.0-RELEASE and X11
I have just installed the new 7.0-RELEASE shown on the www.freebsd.org home page ( still confused as to whether this is CURRENT or STABLE ) and trying to get X working. It doesn't appear to have xorgcfg in it anywhere? Has this handy program been abandoned? I'm running it on an old SAMTRON 5Ei monitor of unknown HorizontalSync and VerticalSync patterns, and the card type is reported as S3. There are a couple of ways to configure the xorg.conf file available - but none seem to be producing any useable results. The handbook is clear and concise - but none of it works. I did a clean install of 7.0 and put X on at the time. But even the manual talks about xorgcfg - but its no where to be found? Should it be there? Or has it been discontinued? thanks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: A couple of questions about 7.0-RELEASE and X11
The configure program is now /usr/local/bin/xorgconfig . You might also want to try 'X -configure' , which does some hardware probing and puts a best guess configure file in /root/xorg.conf.new . The X documentation can still be a bit sketchy. Above advice came from books. Cheers, Gordon On Sat, Mar 15, 2008 at 11:36:36PM +1000, Robert Chalmers wrote: I have just installed the new 7.0-RELEASE shown on the www.freebsd.org home page ( still confused as to whether this is CURRENT or STABLE ) and trying to get X working. It doesn't appear to have xorgcfg in it anywhere? Has this handy program been abandoned? I'm running it on an old SAMTRON 5Ei monitor of unknown HorizontalSync and VerticalSync patterns, and the card type is reported as S3. There are a couple of ways to configure the xorg.conf file available - but none seem to be producing any useable results. The handbook is clear and concise - but none of it works. I did a clean install of 7.0 and put X on at the time. But even the manual talks about xorgcfg - but its no where to be found? Should it be there? Or has it been discontinued? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
upgrade port, a couple of questions
Hi, How can I see which ports depend on libgmp-4.1.4_1? If I upgrade it, the applications that are using the old libgmp would be affected? Thanks... Efren Bravo. - Fight back spam! Download the Blue Frog. http://www.bluesecurity.com/register/s?user=ZWZyZW5iYQ%3D%3D __ LLama Gratis a cualquier PC del Mundo. Llamadas a fijos y móviles desde 1 céntimo por minuto. http://es.voice.yahoo.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: upgrade port, a couple of questions
On Wednesday 02 August 2006 17:27, Efren Bravo wrote: Hi, How can I see which ports depend on libgmp-4.1.4_1? If I upgrade it, the applications that are using the old libgmp would be affected? Thanks... Efren Bravo. If you go into /var/db/pkg/libgmp-4.1.4_1 you'll see a file called +REQUIRED_BY. Read it (cat +REQUIRED_BY) to see which ports require libgmp. You usually do not have to rebuild those ports unless there was a major change in the library. It's up to you to know if you need to rebuild them or not. Nicolas. -- FreeBSD 7.0-CURRENT #11: Sun Jul 30 12:12:59 EDT 2006 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/CLK01A PGP? : http://www.clkroot.net/security/nb_root.asc pgp9Odg1ciaY8.pgp Description: PGP signature
Re: upgrade port, a couple of questions
Nicolas Blais wrote: On Wednesday 02 August 2006 17:27, Efren Bravo wrote: Hi, How can I see which ports depend on libgmp-4.1.4_1? If I upgrade it, the applications that are using the old libgmp would be affected? Thanks... Efren Bravo. If you go into /var/db/pkg/libgmp-4.1.4_1 you'll see a file called +REQUIRED_BY. Read it (cat +REQUIRED_BY) to see which ports require libgmp. You usually do not have to rebuild those ports unless there was a major change in the library. It's up to you to know if you need to rebuild them or not. Nicolas. This is a question i've had for a while, so this (+REQUIRED_BY) checks what depends on libgmp, how do you check what libgmp depends on? Scott. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: upgrade port, a couple of questions
Scott Oertel wrote: Nicolas Blais wrote: On Wednesday 02 August 2006 17:27, Efren Bravo wrote: Hi, How can I see which ports depend on libgmp-4.1.4_1? If I upgrade it, the applications that are using the old libgmp would be affected? Thanks... Efren Bravo. If you go into /var/db/pkg/libgmp-4.1.4_1 you'll see a file called +REQUIRED_BY. Read it (cat +REQUIRED_BY) to see which ports require libgmp. You usually do not have to rebuild those ports unless there was a major change in the library. It's up to you to know if you need to rebuild them or not. Nicolas. This is a question i've had for a while, so this (+REQUIRED_BY) checks what depends on libgmp, how do you check what libgmp depends on? pkg_info? -r Show the list of packages on which each package depends. -R Show the list of installed packages which require each package. Also I've found portmanager copes pretty well with most dependencies. Chris Scott. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
sendmail, a couple of questions.
Hi, My server name is mailsrv and it has two interfaces: xxx.xxx.xxx.xxx =external ip, internet yyy.yyy.yyy.yyy =internal ip, private lan File /etc/hosts looks like: 127.0.0.1 localhost.mydomain.com localhost xxx.xxx.xxx.xxx mailsrv.mydomain.com mailsrv xxx.xxx.xxx.xxx mailsrv.mydomain.com. 1st. How could I avoid this error (/var/log/maillog)? Mar 29 15:52:51 mailsrv sendmail[10381]: gethostbyaddr(yyy.yyy.yyy.yyy) failed: 1 Would be rigth adding inside /etc/hosts these lines: yyy.yyy.yyy.yyy mailsrv.mydomain.com mailsrv yyy.yyy.yyy.yyy mailsrv.mydomain.com. Another suggestion? 2nd. What does it mean? Mar 29 16:07:20 mailsrv sm-mta[10399]: alias database /etc/mail/aliases.db out of date Thanks... __ LLama Gratis a cualquier PC del Mundo. Llamadas a fijos y móviles desde 1 céntimo por minuto. http://es.voice.yahoo.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: sendmail, a couple of questions.
Efren Bravo wrote: [ ... ] 1st. How could I avoid this error (/var/log/maillog)? Mar 29 15:52:51 mailsrv sendmail[10381]: gethostbyaddr(yyy.yyy.yyy.yyy) failed: 1 Fix your reverse DNS for that IP. If yyy is internal, set up a local nameserver to provide a reverse zone, otherwise talk to your ISP if the IP is public. [ ... ] 2nd. What does it mean? Mar 29 16:07:20 mailsrv sm-mta[10399]: alias database /etc/mail/aliases.db out of date You changed /etc/mail/aliases, but forgot to run newaliases. (Or use make maps or make all). -- -Chuck ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: sendmail, a couple of questions.
At 08:03 AM 3/30/2006, Efren Bravo wrote: Hi, My server name is mailsrv and it has two interfaces: xxx.xxx.xxx.xxx =external ip, internet yyy.yyy.yyy.yyy =internal ip, private lan File /etc/hosts looks like: 127.0.0.1 localhost.mydomain.com localhost xxx.xxx.xxx.xxx mailsrv.mydomain.com mailsrv xxx.xxx.xxx.xxx mailsrv.mydomain.com. don't have duplicate names to different IP's. Also be sure you have dotted fully qualified names for both IP's. xxx.xxx.xxx.xxx mailsrv.mydomain.com. mailsrv xxx.xxx.xxx.xxx mailsrv2.mydomain.com. mailsrv2 1st. How could I avoid this error (/var/log/maillog)? Mar 29 15:52:51 mailsrv sendmail[10381]: gethostbyaddr(yyy.yyy.yyy.yyy) failed: 1 Would be rigth adding inside /etc/hosts these lines: yyy.yyy.yyy.yyy mailsrv.mydomain.com mailsrv yyy.yyy.yyy.yyy mailsrv.mydomain.com. Another suggestion? 2nd. What does it mean? Mar 29 16:07:20 mailsrv sm-mta[10399]: alias database /etc/mail/aliases.db out of date run newaliases as root, then restart sendmail /etc/rc.d/sendmail restart Thanks... __ LLama Gratis a cualquier PC del Mundo. Llamadas a fijos y móviles desde 1 céntimo por minuto. http://es.voice.yahoo.com ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: sendmail, a couple of questions.
At 11:33 AM 3/30/2006, you wrote: File /etc/hosts looks like: xxx.xxx.xxx.xxx mailsrv.mydomain.com mailsrv xxx.xxx.xxx.xxx mailsrv.mydomain.com. don't have duplicate names to different IP's. Also be sure you have dotted fully qualified names for both IP's. FWIW, the double entries are what sysinstall creates. I just loaded a new box yesterday and was wondering about that myself. Here's what it crated: # uname -a FreeBSD newb.xxiii.com 6.0-RELEASE FreeBSD 6.0-RELEASE #0 # cat /etc/hosts ::1 localhost.xxiii.com localhost 127.0.0.1 localhost.xxiii.com localhost 192.168.0.14newb.xxiii.com newb 192.168.0.14newb.xxiii.com. So what' with the doubles. anyway? -Wayne ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Restarts at boot (was: Re: a couple of questions.)
Hi. When I boot into FreeBSD, my computer restarts itself and tries to boot into it again. I am running FreeBSD 5.1. Recently I would start the computer, boot into FreeBSD, it would restart itself around where it begins to load loader.conf and then starts to boot up again. After it does that about 2 times it would load FreeBSD. Last night it would not boot into it at all. Do you think it's a hardware problem? Were there any error messages? signature.asc Description: Digital signature
Sound does not work (was: Re: a couple of questions.)
Also, when I load KDE it says that it cannot find device/dev/dsp for sound. I tried loading the soundcard by typing kldload snd_sb16.ko but it doesn't seem like that solved the problem. Does it work if you load the snd.ko module? If it succeeds to initialize your card, it will print some messages on the console (ALT+CTRL+F1). If that does not work: Which card do you have? Simon signature.asc Description: Digital signature
a couple of questions.
Hi. When I boot into FreeBSD, my computer restarts itself and tries to boot into it again. I am running FreeBSD 5.1. Recently I would start the computer, boot into FreeBSD, it would restart itself around where it begins to load loader.conf and then starts to boot up again. After it does that about 2 times it would load FreeBSD. Last night it would not boot into it at all. Do you think it's a hardware problem? Also, when I load KDE it says that it cannot find device/dev/dsp for sound. I tried loading the soundcard by typing kldload snd_sb16.ko but it doesn't seem like that solved the problem. Thanks for the help! __ Do you Yahoo!? Yahoo! Hotjobs: Enter the Signing Bonus Sweepstakes http://hotjobs.sweepstakes.yahoo.com/signingbonus ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
RE: A couple of questions for 5.1rc1....
I run 4.8, but here are my suggestions: The final question I have is one that's probably obscure. I remember a switch used to tell the dhcp client to send the host name of the laptop to a dhcp server. While it gets a man dhclient.conf lease perfectly fine, opening up my linksys dhcp table ( at home ) or the NT dhcp server at work I can only see that a machine has that lease. The name of the laptop isn't listed. I had enabled something on a laptop I had a couple of years ago that made it so the name showed up, but I haven't been able to find anything on this since and I have no idea how I did it before or even where I found it. I don't think dhclient is the issue. If you want your machine to appear on the network, install samba. You don't need to share anything out unless you want to, but samba contains the network name service (nmbd). Then again, maybe I misunderstood you. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: A couple of questions for 5.1rc1....
- Original Message - From: Derrick Ryalls [EMAIL PROTECTED] To: 'chris corayer' [EMAIL PROTECTED]; [EMAIL PROTECTED] Sent: Friday, 06 June, 2003 2:50 Subject: RE: A couple of questions for 5.1rc1 I run 4.8, but here are my suggestions: The final question I have is one that's probably obscure. I remember a switch used to tell the dhcp client to send the host name of the laptop to a dhcp server. While it gets a man dhclient.conf lease perfectly fine, opening up my linksys dhcp table ( at home ) or the NT dhcp server at work I can only see that a machine has that lease. The name of the laptop isn't listed. I had enabled something on a laptop I had a couple of years ago that made it so the name showed up, but I haven't been able to find anything on this since and I have no idea how I did it before or even where I found it. I don't think dhclient is the issue. If you want your machine to appear on the network, install samba. You don't need to share anything out unless you want to, but samba contains the network name service (nmbd). Then again, maybe I misunderstood you. I neglected to mention that I had read through the dhcp related man pages. Probably due to my lack of sleep I missed it but I managed to find what I needed. It was not what I expected it to be. I had put in the line send host-name myhost; into my dhclient.conf file. However, the line I was actually looking for wassend dhcp-client-identifier myhost; I'm not entirely sure why you would use the first one I tried, perhaps if the server always assigns a particular system the same IP address? Then again, wouldn't the line I ended up using do the same thing? Anyway, with the dhcp-client-identifier line, the system now shows up in the NT server/linksys router dhcp clients table. So that's one part down. I will likely be adding samba soon as it will be nice for the laptop to show up in the browse lists as well. Now I just need to spend some more time this weekend and see if I can't fix those ACPI/APM issues. -Chris ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
A couple of questions for 5.1rc1....
I am trying to figure out how to fix an niggling dhcp issue and permanently disable ACPI and enable apm on my HP Omnibook 900. I'm running 5.1RC1, which is great since this is the first time I've managed to get 5.x on this unit. Even my xircom realport cards work. However, I'm having trouble figuring out exactly where to put the ACPI disable line as this machine just crashes and reboots if I leave it enabled. I think it should go in loader.conf, but I'm unsure exactly on the syntax or if that's where it belongs. Also, I seem to remember that you could enable APM with the generic kernel by inserting a line into loader.conf as well. The final question I have is one that's probably obscure. I remember a switch used to tell the dhcp client to send the host name of the laptop to a dhcp server. While it gets a lease perfectly fine, opening up my linksys dhcp table ( at home ) or the NT dhcp server at work I can only see that a machine has that lease. The name of the laptop isn't listed. I had enabled something on a laptop I had a couple of years ago that made it so the name showed up, but I haven't been able to find anything on this since and I have no idea how I did it before or even where I found it. I think I'm missing some probably obvious things. Can anyone at least point me in the proper direction? Thanks. -Chris ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Re: A couple of questions related to the sendmail patch, etc.
The correct way of applying it for 8.11.x is: # cd /usr/src/contrib/sendmail/src # patch -p1 /PATH/TO/sendmail.8.11.6.security.cr.patch This worked like a charm... HOWEVER, I now have to recompile sendmail and install the new binary, which I haven't the first clue how to do (well, I have a clue, but I'd hate to guess and end up without a MTA for a day!) Could someone point me in the direction of the right FM to read? I'm using version 8.11.6 on FreeBSD4.6-Release. Many thanks in advance! : ) phillip. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: Re: A couple of questions related to the sendmail patch, etc.
On 2003-03-06 12:08, [EMAIL PROTECTED] wrote: The correct way of applying it for 8.11.x is: # cd /usr/src/contrib/sendmail/src # patch -p1 /PATH/TO/sendmail.8.11.6.security.cr.patch This worked like a charm... HOWEVER, I now have to recompile sendmail and install the new binary, which I haven't the first clue how to do (well, I have a clue, but I'd hate to guess and end up without a MTA for a day!) Could someone point me in the direction of the right FM to read? I'm using version 8.11.6 on FreeBSD4.6-Release. Many thanks in advance! The safest way is to use 'buildworld / buildkernel' as usual. - Giorgos To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: A couple of questions related to the sendmail patch, etc.
On 2003-03-04 22:38, taxman [EMAIL PROTECTED] wrote: On Tuesday 04 March 2003 01:08 pm, Giorgos Keramidas wrote: On 2003-03-04 10:02, Phillip Smith [EMAIL PROTECTED] wrote: : A couple of quick questions... : : I've downloaded the 8.11.6 patch from sendmail.org, and used the : instructions they provided : [patch -p0 /PATH/TO/sendmail.8.11.6.security.cr.patch], which then : prompts me for 'which file to patch.' I'm not clear on which file I : _need_ to patch? Or where it would be. You should run the patch command with /usr/src/contrib/sendmail as your current working directory. I don't run sendmail at all, but I would like to learn how to apply the patch. doing: patch -p0 /home/tim/sendmail.8.12.security.cr.patch in the above directory still gives the File to patch: prompt What else needs to be done to apply the patch? Hmmm, sorry for the confusion. I didn't read the patch carefully. The correct way of applying it for 8.11.x is: # cd /usr/src/contrib/sendmail/src # patch -p1 /PATH/TO/sendmail.8.11.6.security.cr.patch To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: A couple of questions related to the sendmail patch, etc.
At 12:27 05.03.2003 +0200, you wrote: On 2003-03-04 22:38, taxman [EMAIL PROTECTED] wrote: On Tuesday 04 March 2003 01:08 pm, Giorgos Keramidas wrote: On 2003-03-04 10:02, Phillip Smith [EMAIL PROTECTED] wrote: : A couple of quick questions... : : I've downloaded the 8.11.6 patch from sendmail.org, and used the : instructions they provided : [patch -p0 /PATH/TO/sendmail.8.11.6.security.cr.patch], which then : prompts me for 'which file to patch.' I'm not clear on which file I : _need_ to patch? Or where it would be. You should run the patch command with /usr/src/contrib/sendmail as your current working directory. I don't run sendmail at all, but I would like to learn how to apply the patch. doing: patch -p0 /home/tim/sendmail.8.12.security.cr.patch in the above directory still gives the File to patch: prompt What else needs to be done to apply the patch? Hmmm, sorry for the confusion. I didn't read the patch carefully. The correct way of applying it for 8.11.x is: # cd /usr/src/contrib/sendmail/src # patch -p1 /PATH/TO/sendmail.8.11.6.security.cr.patch I'm running the patch now, but it looks strange to me.. Is this patch suppose to take a long time (minutes) without any output on the screen? /Andreas --- Andreas Widerøe Andersen [EMAIL PROTECTED] Pragma AS http://www.pragma.no To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: A couple of questions related to the sendmail patch, etc.
On 2003-03-05 12:00, Andreas Wider?e Andersen [EMAIL PROTECTED] wrote: At 12:27 05.03.2003 +0200, you wrote: On 2003-03-04 22:38, taxman [EMAIL PROTECTED] wrote: Hmmm, sorry for the confusion. I didn't read the patch carefully. The correct way of applying it for 8.11.x is: # cd /usr/src/contrib/sendmail/src # patch -p1 /PATH/TO/sendmail.8.11.6.security.cr.patch I'm running the patch now, but it looks strange to me.. Is this patch suppose to take a long time (minutes) without any output on the screen? No, it's supposed to be real fast and generate copious output on your monitor detailing what files are touched by the changes of the patch. You probably missed the '' redirection shown above. The patch(1) utility reads the diff of changes from standard input. If you don't redirect its stdin with `patch file' it waits for input from the terminal. - Giorgos To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: A couple of questions related to the sendmail patch, etc.
Errr... If you are not currently running Sendmail (IE It's not installed).. Then there's nothing to patch Peter At 10:38 PM 3/4/2003 -0500, you wrote: On Tuesday 04 March 2003 01:08 pm, Giorgos Keramidas wrote: On 2003-03-04 10:02, Phillip Smith [EMAIL PROTECTED] wrote: : A couple of quick questions... : : I've downloaded the 8.11.6 patch from sendmail.org, and used the : instructions they provided : [patch -p0 /PATH/TO/sendmail.8.11.6.security.cr.patch], which then : prompts me for 'which file to patch.' I'm not clear on which file I : _need_ to patch? Or where it would be. You should run the patch command with /usr/src/contrib/sendmail as your current working directory. I don't run sendmail at all, but I would like to learn how to apply the patch. doing: patch -p0 /home/tim/sendmail.8.12.security.cr.patch in the above directory still gives the File to patch: prompt What else needs to be done to apply the patch? Thanks, Tim To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message -- Peter Elsner [EMAIL PROTECTED] Vice President Of Customer Service (And System Administrator) 1835 S. Carrier Parkway Grand Prairie, Texas 75051 (972) 263-2080 - Voice (972) 263-2082 - Fax (972) 489-4838 - Cell Phone (425) 988-8061 - eFax I worry about my child and the Internet all the time, even though she's too young to have logged on yet. Here's what I worry about. I worry that 10 or 15 years from now, she will come to me and say Daddy, where were you when they took freedom of the press away from the Internet? -- Mike Godwin Unix IS user friendly... It's just selective about who its friends are. System Administration - It's a dirty job, but somebody said I had to do it. If you receive something that says 'Send this to everyone you know, pretend you don't know me. Standard $500/message proofreading fee applies for UCE. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: A couple of questions related to the sendmail patch, etc.
On Wednesday 05 March 2003 05:27 am, Giorgos Keramidas wrote: On 2003-03-04 22:38, taxman [EMAIL PROTECTED] wrote: On Tuesday 04 March 2003 01:08 pm, Giorgos Keramidas wrote: On 2003-03-04 10:02, Phillip Smith [EMAIL PROTECTED] wrote: : A couple of quick questions... : : I've downloaded the 8.11.6 patch from sendmail.org, and used the : instructions they provided : [patch -p0 /PATH/TO/sendmail.8.11.6.security.cr.patch], which then : prompts me for 'which file to patch.' I'm not clear on which file I : _need_ to patch? Or where it would be. You should run the patch command with /usr/src/contrib/sendmail as your current working directory. I don't run sendmail at all, but I would like to learn how to apply the patch. doing: patch -p0 /home/tim/sendmail.8.12.security.cr.patch in the above directory still gives the File to patch: prompt What else needs to be done to apply the patch? Hmmm, sorry for the confusion. I didn't read the patch carefully. The correct way of applying it for 8.11.x is: # cd /usr/src/contrib/sendmail/src # patch -p1 /PATH/TO/sendmail.8.11.6.security.cr.patch Thanks Giorgos, that worked for the patch for 8.12.6 too. To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
A couple of questions related to the sendmail patch, etc.
Hello, A couple of quick questions... I've downloaded the 8.11.6 patch from sendmail.org, and used the instructions they provided [patch -p0 /PATH/TO/sendmail.8.11.6.security.cr.patch], which then prompts me for 'which file to patch.' I'm not clear on which file I _need_ to patch? Or where it would be. I've read the thread on this already, and perhaps I'll try upgrading Sendmail in its entirety. But, for my amusement, how would I patch my current (working perfectly) version of Sendmail? Second question, I'd like to re-compile my Kernel and some other things that required the sources to be installed. On one machine (where I didn't install then initially), I'm having a real challenge trying to get them (chicken and egg); using sysinstall, I'm trying to install additional distributions sources all. Unfortunately, the CD-ROM does not seem to be working on this box, so I'm trying via ftp... but I keep receiving this message: Warning: Can't find the `4.5-RELEASE' distribution on this server. You may need to visit a different server for the release you are trying to fetch or go to the Options menu and to set the release name to explicitly match what's available on ftp.freebsd.org (or set to any). Would you like to select another FTP server? Any thoughts on how to get the sources downloaded? -- Phillip To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: A couple of questions related to the sendmail patch, etc.
Phillip - On Tue, 4 Mar 2003, Phillip Smith (mailing list) wrote: I've downloaded the 8.11.6 patch from sendmail.org, and used the instructions they provided [patch -p0 /PATH/TO/sendmail.8.11.6.security.cr.patch], which then prompts me for 'which file to patch.' I'm not clear on which file I _need_ to patch? Or where it would be. I associate this message with an earlier line identifying the file being sought. Usually this means I am not in a directory at the same relative path [to the source root] from which the patch was made. Back up one directory above your source root and try a few values of '-pN': -p1 .. -p3 stopping as you have if the sources are not found -- very likely you will hit the right offset and one or all of the patches will be applied successfully. You have to look at any sections which fail to determine why, and whether they are important. (You will get a report of this and they will have been saved with a 'rej' suffix.) -- John Mills [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: A couple of questions related to the sendmail patch, etc.
On 2003-03-04 10:02, Phillip Smith [EMAIL PROTECTED] wrote: : : A couple of quick questions... : : I've downloaded the 8.11.6 patch from sendmail.org, and used the : instructions they provided : [patch -p0 /PATH/TO/sendmail.8.11.6.security.cr.patch], which then : prompts me for 'which file to patch.' I'm not clear on which file I : _need_ to patch? Or where it would be. You should run the patch command with /usr/src/contrib/sendmaill as your current working directory. : Second question, I'd like to re-compile my Kernel and some other : things that required the sources to be installed. On one machine : (where I didn't install then initially), I'm having a real challenge : trying to get them (chicken and egg); using sysinstall, I'm trying : to install additional distributions sources all. Unfortunately, : the CD-ROM does not seem to be working on this box, so I'm trying : via ftp... but I keep receiving this message: Can you mount the CD-ROM at all? If you manage to mount the CD-ROM under /mnt/cdrom then you can copy the sources from /mnt/cdrom without using sysinstall. - Giorgos To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message
Re: A couple of questions related to the sendmail patch, etc.
On Tuesday 04 March 2003 01:08 pm, Giorgos Keramidas wrote: On 2003-03-04 10:02, Phillip Smith [EMAIL PROTECTED] wrote: : A couple of quick questions... : : I've downloaded the 8.11.6 patch from sendmail.org, and used the : instructions they provided : [patch -p0 /PATH/TO/sendmail.8.11.6.security.cr.patch], which then : prompts me for 'which file to patch.' I'm not clear on which file I : _need_ to patch? Or where it would be. You should run the patch command with /usr/src/contrib/sendmail as your current working directory. I don't run sendmail at all, but I would like to learn how to apply the patch. doing: patch -p0 /home/tim/sendmail.8.12.security.cr.patch in the above directory still gives the File to patch: prompt What else needs to be done to apply the patch? Thanks, Tim To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-questions in the body of the message