Re: 4.9 ATA hangs with 2 ata drives
At 00:22 + 12/02/2003, Lee Harr wrote: I've got both 4.9 and 5.1 loaded on my new ASUS A7N8X Deluxe with two 160Gb disks on the primary ATA controller. it hangs during kernel boot after the message: ad1: READ command timeout tag=0 serv=0 - resetting ata0: resetting devices Yup. I have the same thing. What I do is go in to the BIOS and set the slave drive from Auto to None when I want to boot from the first drive, and switch it back when I want to boot from the second drive. Kind of a pain, but it works... Thanks - good idea. I have the drives in removable racks, so I've been unplugging ad1 when I want to boot 4.9. I think it's just symptomatic of the nforce2 chipset which is only partially supported due to nvidia's refusal or inability to release proper specs. There was a post about sending email to ASUS and/or NVidia to encourage them to share with the community. I'm ready. Now if I can only find that link/message again... (;-) tks j ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: 4.9 ATA hangs with 2 ata drives
At 21:40 -0500 12/01/2003, Aaron Myles Landwehr wrote: I have the same problem with my asus p4s8x mobo on freebsd 4.9 and priorIf i disable dma the cd will boot.; 5.1 works correctly(with dma enabled). from the cases i've seen...they all include an ASUS motherboard... -aaron[EMAIL PROTECTED] I didn't have any trouble with the cd booting. I've got it set up as my secondary ata master. It sees my ad0 fine, and then hangs before showing the drive type for ad1. This post had ad0 hang using a GA - 8SG800 motherboard. Maybe also an nforce2 chipset? http://www.freebsd.org/cgi/getmsg.cgi?fetch=2472274+2474865+/usr/local/www/db/text/2003/freebsd-questions/20031109.freebsd-questions I could swear there were others, but the only ones that I could find quickly were about cdrom problems, not hard drives. ... 4.9 hangs on boot with: ... ad1: READ command timeout tag=0 serv=0 - resetting ata0: resetting devices I've seen what looks like similar problems in the archives (e.g., http://docs.freebsd.org/cgi/mid.cgi?188200406.20031109073901). It seems to happen on various motherboards and disk configurations. I wanted to provide another datapoint for configurations. tks j ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: 4.9 ATA hangs with 2 ata drives
try turning off dma on the affected drive...see if it boots correctly At 21:40 -0500 12/01/2003, Aaron Myles Landwehr wrote: I have the same problem with my asus p4s8x mobo on freebsd 4.9 and priorIf i disable dma the cd will boot.; 5.1 works correctly(with dma enabled). from the cases i've seen...they all include an ASUS motherboard... -aaron[EMAIL PROTECTED] I didn't have any trouble with the cd booting. I've got it set up as my secondary ata master. It sees my ad0 fine, and then hangs before showing the drive type for ad1. This post had ad0 hang using a GA - 8SG800 motherboard. Maybe also an nforce2 chipset? http://www.freebsd.org/cgi/getmsg.cgi?fetch=2472274+2474865+/usr/local/www/db/text/2003/freebsd-questions/20031109.freebsd-questions I could swear there were others, but the only ones that I could find quickly were about cdrom problems, not hard drives. ... 4.9 hangs on boot with: ... ad1: READ command timeout tag=0 serv=0 - resetting ata0: resetting devices I've seen what looks like similar problems in the archives (e.g., http://docs.freebsd.org/cgi/mid.cgi?188200406.20031109073901). It seems to happen on various motherboards and disk configurations. I wanted to provide another datapoint for configurations. tks j ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
4.9 ATA hangs with 2 ata drives
I've got both 4.9 and 5.1 loaded on my new ASUS A7N8X Deluxe with two 160Gb disks on the primary ATA controller. 5.1 does much better handling both ATA disks. When I run 4.9 with the second disk connected, it hangs during kernel boot after the message: ad1: READ command timeout tag=0 serv=0 - resetting ata0: resetting devices I've seen what looks like similar problems in the archives (e.g., http://docs.freebsd.org/cgi/mid.cgi?188200406.20031109073901). It seems to happen on various motherboards and disk configurations. I wanted to provide another datapoint for configurations. My 4.9 came from the CD image downloaded from the ftp site last week (weds). 5.1 came from the subscription CD. The questions are: 1. Has anyone gotten a similar configuration working on 4.9? 2. Will it make a difference to CVSup? Thanks in advance! j ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: 4.9 ATA hangs with 2 ata drives
I have the same problem with my asus p4s8x mobo on freebsd 4.9 and priorIf i disable dma the cd will boot.; 5.1 works correctly(with dma enabled). from the cases i've seen...they all include an ASUS motherboard... -aaron[EMAIL PROTECTED] I've got both 4.9 and 5.1 loaded on my new ASUS A7N8X Deluxe with two 160Gb disks on the primary ATA controller. 5.1 does much better handling both ATA disks. When I run 4.9 with the second disk connected, it hangs during kernel boot after the message: ad1: READ command timeout tag=0 serv=0 - resetting ata0: resetting devices I've seen what looks like similar problems in the archives (e.g., http://docs.freebsd.org/cgi/mid.cgi?188200406.20031109073901). It seems to happen on various motherboards and disk configurations. I wanted to provide another datapoint for configurations. My 4.9 came from the CD image downloaded from the ftp site last week (weds). 5.1 came from the subscription CD. The questions are: 1. Has anyone gotten a similar configuration working on 4.9? 2. Will it make a difference to CVSup? Thanks in advance! j ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: 4.9 ATA hangs with 2 ata drives
I've got both 4.9 and 5.1 loaded on my new ASUS A7N8X Deluxe with two 160Gb disks on the primary ATA controller. it hangs during kernel boot after the message: ad1: READ command timeout tag=0 serv=0 - resetting ata0: resetting devices Yup. I have the same thing. What I do is go in to the BIOS and set the slave drive from Auto to None when I want to boot from the first drive, and switch it back when I want to boot from the second drive. Kind of a pain, but it works... I think it's just symptomatic of the nforce2 chipset which is only partially supported due to nvidia's refusal or inability to release proper specs. _ MSN 8 with e-mail virus protection service: 2 months FREE* http://join.msn.com/?page=features/virus ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
