Hi Roland,
many thanks for the response!!! :-)
I waited until I had a test server setup and at least now I do..
In fact I think from my usage perspective FreeBSD is not that difficult
to understand!!!
I now have a test machine setup which I built nano and Bind 9.6.1 from
the ports
Just to give a quick overview of what is being used currently:
test# du -sch etc
1.7Metc
1.7Mtotal
test# du -sch var
1.0Mvar
1.0Mtotal
test# du -sch tmp
10Ktmp
10Ktotal
test# du -sch usr
1.0Gusr
1.0Gtotal
I think I could get away with 500MB for /var and /tmp and
On Fri, Jan 01, 2010 at 11:41:04PM +0200, Kaya Saman wrote:
Hi Roland,
many thanks for the response!!! :-)
You're welcome!
I waited until I had a test server setup and at least now I do..
In fact I think from my usage perspective FreeBSD is not that difficult
to understand!!!
If
On Mon, Dec 28, 2009 at 11:49:31PM +0200, Kaya Saman wrote:
Hi guys,
I attempted an install of 7.2 stable on my laptop and subsequently
installed X11also. Now I didn't have any Xorg.conf file but each time I
tried to start X from the CLI using the normal startx command (read the
On Mon, Dec 28, 2009 at 04:20:10PM -0600, Adam Vande More wrote:
On Mon, Dec 28, 2009 at 3:49 PM, Kaya Saman kayasa...@optiplex-networks.com
Running with no xorg.conf is fine, but you need to make sure dbus and hal
are started at boot. Follow the handbook for best results.
On Mon, Dec 28, 2009 at 05:04:52PM -0600, Adam Vande More wrote:
On Mon, Dec 28, 2009 at 4:42 PM, Kaya Saman samank...@netscape.net wrote:
Also if something goes wrong with the filesystem what are the tools to
check the drive and repair errors as in Linux I use e2fsck followed by
device ID.
Alex de Kruijff wrote:
On Mon, Dec 28, 2009 at 05:04:52PM -0600, Adam Vande More wrote:
On Mon, Dec 28, 2009 at 4:42 PM, Kaya Saman samank...@netscape.net wrote:
Also if something goes wrong with the filesystem what are the tools to
check the drive and repair errors as in Linux I use
On Tue, Dec 29, 2009 at 05:19:54PM +0200, Kaya Saman wrote:
Many thanks guys for all the advice :-)
It is really appreciated!
Sorry haven't snipped more stuff into this mail but things are a bit
hectic here but what I will say is this; in a few hours once the BSD 8
DVD ISO comes
[...]
What is not unusual is to symlink /home e.g:
# ln -s /usr/home /home
ditto for /tmp. i.e you remove all the stuff that uses up space from
the root partition.
So the only slices you need are /, /usr, /var and swap.
How I'd slice up the disk:
2GB for /
2GB for swap
2GB for /var
34GB
On Tue, 29 Dec 2009, Kaya Saman wrote:
How I'd slice up the disk:
2GB for /
2GB for swap
2GB for /var
34GB for /usr
Ah so BSD is slightly different from Linux in the fact that it needs to have
/var and /usr filesystems separate??
It's not required, it's just nice to do if the disk space
On Tue, Dec 29, 2009 at 06:37:25PM +0200, Kaya Saman wrote:
[...]
What is not unusual is to symlink /home e.g:
# ln -s /usr/home /home
ditto for /tmp. i.e you remove all the stuff that uses up space from
the root partition.
So the only slices you need are /, /usr, /var and swap.
On Tue, Dec 29, 2009 at 04:27:11PM +, Frank Shute wrote:
On Tue, Dec 29, 2009 at 05:19:54PM +0200, Kaya Saman wrote:
Many thanks guys for all the advice :-)
It is really appreciated!
...
I reckon the proposed disk usage spec from the FreeBSD hand book should
suffice
On Tue, Dec 29, 2009 at 06:37:25PM +0200, Kaya Saman wrote:
[...]
What is not unusual is to symlink /home e.g:
# ln -s /usr/home /home
ditto for /tmp. i.e you remove all the stuff that uses up space from
the root partition.
So the only slices you need are /, /usr, /var and
On Tue, Dec 29, 2009 at 06:37:25PM +0200, Kaya Saman wrote:
[...]
What is not unusual is to symlink /home e.g:
# ln -s /usr/home /home
ditto for /tmp. i.e you remove all the stuff that uses up space from
the root partition.
So the only slices you need are /, /usr, /var and swap.
Many thanks again for all suggestions! :-)
[...]
For my desktop, with around 450 ports installed, I have the following lay-out;
Filesystem SizeUsed Avail Capacity Mounted on
/dev/ad4s1a484M 93M353M21%/
/dev/ad4s1g.eli373G168G175G49%
On Tue, Dec 29, 2009 at 12:25:48PM -0500, Jerry McAllister wrote:
On Tue, Dec 29, 2009 at 04:27:11PM +, Frank Shute wrote:
On Tue, Dec 29, 2009 at 05:19:54PM +0200, Kaya Saman wrote:
Many thanks guys for all the advice :-)
It is really appreciated!
...
I reckon
On Tue, Dec 29, 2009 at 09:06:09PM +0200, Kaya Saman wrote:
lot's of different pieces of advice rolling in now!
I guess what I will do as I have a small hard disk for what I want to do
which is to get rid of my music and few movies which are stored on my
laptop currently, is create
Roland:
If you can afford it, and if your laptop has a USB port, buy one of those
external harddisks. Plenty of room for music and movies... Also great for
backups!
Can't afford :-( I have many disks like that where I bought really cool
enclosures and the drives separately but currently
Hi guys,
first up I hope I am in the right place as my questions are of a generic
nature about FreeBSD as I consider myself a new user not having much
mileage with the OS as of yet!
Secondly I just wanted to wish everyone a happy Christmas and New Year
also since we are in that period :-)
On Mon, Dec 28, 2009 at 3:49 PM, Kaya Saman kayasa...@optiplex-networks.com
wrote:
Hi guys,
first up I hope I am in the right place as my questions are of a generic
nature about FreeBSD as I consider myself a new user not having much mileage
with the OS as of yet!
Secondly I just wanted
Running with no xorg.conf is fine, but you need to make sure dbus and
hal are started at boot. Follow the handbook for best results.
http://www.freebsd.org/doc/en/books/handbook/x-config.html
I'm sure I started them as this doc is exactly what I followed.. I
think if I recall
On Mon, Dec 28, 2009 at 4:42 PM, Kaya Saman samank...@netscape.net wrote:
I know how strong UFS v.1 is as I use it with Solaris 9, but how about UFS
v.2 which is what FreeBSD runs?? When compared with ext3 from a
performance/reliability perspective which one comes on top?
I would say ufs2
On Mon, Dec 28, 2009 at 14:42, Kaya Saman samank...@netscape.net wrote:
Running with no xorg.conf is fine, but you need to make sure dbus and hal
are started at boot. Follow the handbook for best results.
http://www.freebsd.org/doc/en/books/handbook/x-config.html
I'm sure I started them
I would say ufs2 easily wins, but remember this is the
freebsd-questions list ;) There are some differences though, ufs2
uses softupdates, not journaling(journaling is available and easy to
implement via gjournal). Softupdates I believe are a little faster
than journaling, but it's
I can't speak to the rest, but WRT the GUI, I suspect you'll find it a
lot easier if you install a Window Manager to handle a lot of this. I
have found xfce4 to be a good one for me - gnome and kde were a bit
much. Once I installed /usr/ports/x11-wm/xfce4 with a 'make
config-recursive' then
On Monday 28 December 2009 22:49:31 Kaya Saman wrote:
Hi guys,
first up I hope I am in the right place as my questions are of a generic
nature about FreeBSD as I consider myself a new user not having much
mileage with the OS as of yet!
Secondly I just wanted to wish everyone a happy
On Mon, Dec 28, 2009 at 15:29, Kaya Saman samank...@netscape.net wrote:
I can't speak to the rest, but WRT the GUI, I suspect you'll find it a
lot easier if you install a Window Manager to handle a lot of this. I
have found xfce4 to be a good one for me - gnome and kde were a bit
much. Once I
The most common cause is that either hald (sysutils/hal) or dbus (devel/dbus)
isn't running. Xorg needs them both to detect mouse and keyboard. Add
dbus_enable=YES and hald_enable=YES to rc.conf to get them to start
automatically.
We'll see what the issue actually is - as I mentioned I
Kurt Buff wrote:
On Mon, Dec 28, 2009 at 15:29, Kaya Saman samank...@netscape.net wrote:
I see I didn't completely read your original message. Indulge me a
moment while I ramble here, and probably expose my ignorance...
Xorg/X11 Gnome
Gnome runs on Xorg: Xorg/Xfree runs X11
Xfree
Adam Vande More wrote:
On Mon, Dec 28, 2009 at 3:49 PM, Kaya Saman kayasa...@optiplex-networks.com
wrote:
Hi guys,
I attempted an install of 7.2 stable on my laptop and subsequently
installed X11also. Now I didn't have any Xorg.conf file but each time I
tried to start X from the CLI using
On Mon, Dec 28, 2009 at 16:23, Kaya Saman samank...@netscape.net wrote:
snip
So, given what you've written below, you probably know more about this
stuff than I do. Cool. I will echo the advice already given, however:
add
dbus_enable=YES
hald_enable=YES
to your /etc/rc.conf. That will most
[...]
add
dbus_enable=YES
hald_enable=YES
to your /etc/rc.conf. That will most likely clear your problem.
[...]
I will give this a go soon :-)
That's what I do with mine under FreeBSD, for both servers and workstations.
Having both servers and workstations is cool as both of
I want to set up a FreeBSD file server and want to choose the
appropriate method. The filesytems must be mounted on the client,
always available, and transparent to the user.
Thanks
===
NFS for *nix to *nix only
NIS for better management of NFS
Can OSX mount and respond to NFS/NIS?
What
33 matches
Mail list logo