On Fri, Nov 25, 2011 at 06:58:21PM +0100, Moritz Wilhelmy wrote:
> On Fri, Nov 25, 2011 at 08:19:15 -0500, Thomas Dickey wrote:
> > well... rxvt-unicode-256color was the effect of the checkins for termcap.src
> > for conf/152713 and conf/153164
> >
> > The earlier one suggests that the naming came
On Fri, Nov 25, 2011 at 08:19:15 -0500, Thomas Dickey wrote:
> well... rxvt-unicode-256color was the effect of the checkins for termcap.src
> for conf/152713 and conf/153164
>
> The earlier one suggests that the naming came from rxvt-unicode's sources.
> Checking that, it seems that the rxvt-unico
On Fri, Nov 25, 2011 at 01:02:15PM +0100, Moritz Wilhelmy wrote:
> On Fri, Nov 25, 2011 at 06:37:18 -0500, Thomas Dickey wrote:
> > On Fri, Nov 25, 2011 at 11:59:01AM +0100, Moritz Wilhelmy wrote:
> > > I can't get colours to work with urxvt (the "normal" urxvt, that is, not
> > > the 256-color one
On Fri, Nov 25, 2011 at 11:59:01AM +0100, Moritz Wilhelmy wrote:
> Hello,
>
> I can't get colours to work with urxvt (the "normal" urxvt, that is, not
> the 256-color one) over ssh. Google doesn't come up with any usable
> results for this particular case.. What bothers me is that a termcap
> entr
On Fri, Nov 25, 2011 at 06:37:18 -0500, Thomas Dickey wrote:
> On Fri, Nov 25, 2011 at 11:59:01AM +0100, Moritz Wilhelmy wrote:
> > I can't get colours to work with urxvt (the "normal" urxvt, that is, not
> > the 256-color one) over ssh. Google doesn't come up with any usable
> > results for this p
Hello,
I can't get colours to work with urxvt (the "normal" urxvt, that is, not
the 256-color one) over ssh. Google doesn't come up with any usable
results for this particular case.. What bothers me is that a termcap
entry for "rxvt-unicode" is present on the termcap file FreeBSD came
with. I'm re
On Sat, Jun 05, 2010 at 10:13:34AM -0700, Chip Camden wrote:
...
> Thanks for your response, but I solved the problem by specifying that
> mutt should use slang instead of ncurses. That works better in a couple
> of ways, so I'll go with that.
>
> I do, however, still have o
On Jun 04 2010 19:52, Thomas Dickey wrote:
> On Fri, Jun 04, 2010 at 08:02:34AM -0700, Chip Camden wrote:
> > Thanks to some help from Joel Dahl on the mutt-users list, I was able to
> > restore correct color support in my mutt installation. But it raises a
> > question about
here a way to specify that mutt should use the system ncurses instead
> > of devel/ncurses?
>
> Looking at the port's Makefile, it depends on the system ncurses library if
> neither WITH_SLANG nor WITH_NCURSES_PORT is set. But it could still link to
> the port's library
On Fri, Jun 04, 2010 at 08:02:34AM -0700, Chip Camden wrote:
>
> It seems that building mutt with the devel/ncurses port installed creates
> the problem I was experiencing: most colors do not show up in mutt, and
> the line-drawing characters are borked. Deinstalling devel
On Jun 04 2010 17:30, sghctoma wrote:
> not exactly a solution, rather a workaround, but you can build mutt
> with s-lang (WITH_MUTT_SLANG=YES) instead of ncurses.. it works for
> me..
Thanks for the tip. I'm not sure if I'll go that route, but I'm copying
your
Thanks to some help from Joel Dahl on the mutt-users list, I was able to
restore correct color support in my mutt installation. But it raises a
question about ncurses.
It seems that building mutt with the devel/ncurses port installed creates
the problem I was experiencing: most colors do not
Hi,
I can't get the ncurses-based menu shown by running "make config" for an
arbitrary port in FreeBSD 8.0 to use UTF-8 line drawing characters,
rather than ISO-8859-1.
I've configured my locale by setting
:charset=UTF-8:\
:lang=en_US.UTF-8:
in /etc/login.conf and t
michael green wrote:
> 7.2-RELEASE #0. Generic kernel. Full installation from DVD.
>
>
> I'm trying to install ncurses because I want to run FoxPro Unix, which
> expects a terminfo database.
>
Perhaps terminfo(5) can help?
--
Glen
On Fri, Jul 31, 2009 at 11:20:27AM +, michael green wrote:
> 7.2-RELEASE #0. Generic kernel. Full installation from DVD.
>
> I'm trying to install ncurses because I want to run FoxPro Unix, which
> expects a terminfo database.
You don't have to install it. It is alread
7.2-RELEASE #0. Generic kernel. Full installation from DVD.
I'm trying to install ncurses because I want to run FoxPro Unix, which expects
a terminfo database.
I did this:
# cd /usr/src/contrib/ncurses [Enter]
# ./configure [Enter]
The last line of output is
config.status: error: c
Hi all
I'm learning to build ncurses-5.6 from sources (ie. outside of ports) on i386
FreeBSD 7.0 (RELENG_7).
As the first step, I want to make sure I patch the ncurses-5.6.tar.gz
correctly. Here is what I do:
1. Download ncurses-5.6.tar.gz from http://ftp.gnu.org/pub/gnu/ncurses/
2. Dow
On Fri, Apr 13, 2007 at 10:41:58PM +0200, Ewald Jenisch wrote:
>
> I've got a problem doing a "make builworld" on a new machine: When I
> start "make buildworld" in /usr/src I end up with the errors below.
> ...
Hi,
Figured out the problem myself in the meantime: The machine in
question, being
On Fri, Apr 13, 2007 at 05:10:55PM -0400, Gerard Seibert wrote:
>
> Are you by any chance using a custom 'stable-supfile' rather than using
> one of the preconfigured ones?
>
> /usr/share/examples/cvsup/stable-supfile
> /usr/src/share/examples/cvsup/stable-supfile
>
Hi,
No, I'm run
On Fri, 13 Apr 2007 22:41:58 +0200
Ewald Jenisch <[EMAIL PROTECTED]> wrote:
> I've got a problem doing a "make builworld" on a new machine: When I
> start "make buildworld" in /usr/src I end up with the errors below.
>
> Sure enough I've set up a corresponding supfile for "stable", sources
> are
/obj/usr
# rm -rf /usr/obj/usr
# cd /usr/src
# make cleandir
# make cleandir
To no extent - the error remains.
Any idea what could be wrong here?
Thanks much in advance for your help,
-ewald
-- < Cut here > ------
.
.
.
awk -f
/
> -Original Message-
> From: Raaf [mailto:[EMAIL PROTECTED]
> Sent: Friday, 13 October 2006 7:36 AM
> To: freebsd-questions@freebsd.org
> Cc: Murray Taylor
> Subject: Re: Question re ncurses and the various ttys
>
> > Hi all
> >
> > I've
> Hi all
>
> I've been digging around in the various man pages and havent yet found
> the
> incantations I require.
>
> Goal: to create a curses driven status screen that can run without user
> intervention.
>
> I want to know if it is possible to _programatically_ switch to an
> unused
> virt
You should be able to do this, provided the perms are set right on that device.
-Derek
At 10:24 PM 10/11/2006, Murray Taylor wrote:
Hi all
I've been digging around in the various man pages and havent yet found
the
incantations I require.
Goal: to create a curses driven status screen
> I want to know if it is possible to _programatically_ switch to
> an unused virtual tty, and then use this as the display page.
> ( By unused I mean marked 'off' in /etc/ttys )
>
> So if I set ttyv7 to off, can I launch a program (possibly from
> a cold boot) that selects tty7 ( ie the now getty
Hi all
I've been digging around in the various man pages and havent yet found
the
incantations I require.
Goal: to create a curses driven status screen that can run without user
intervention.
I want to know if it is possible to _programatically_ switch to an
unused
virtual tty, and then use th
On Tue, Aug 30, 2005 at 09:10:29PM -0700, Mac Mason wrote:
> While running a make buildworld on a system that was cvsup'd to
> RELENG_5_4 about an hour ago, it breaks on
>
> [snip]/contrib/ncurses/ncurses/tinfo/make_keys.c
>
> with
>
> /usr/obj/usr/src/sys/i38
While running a make buildworld on a system that was cvsup'd to
RELENG_5_4 about an hour ago, it breaks on
[snip]/contrib/ncurses/ncurses/tinfo/make_keys.c
with
/usr/obj/usr/src/sys/i386/usr/bin/ld: cannot find -lc
What's going on here? I deleted both /usr/obj and /usr/src and
r
Aleksander Rozman - Andy wrote:
Some time ago I did little experimenting on my FreeBSD box (I was trying
to compile some programs and I installed new version of ceratain auto*
and other programs) so after that I couldn't usee gcc anymore. I
reinstalled gcc and some other tools, but now nc
Hi !
Some time ago I did little experimenting on my FreeBSD box (I was trying to
compile some programs and I installed new version of ceratain auto* and
other programs) so after that I couldn't usee gcc anymore. I reinstalled
gcc and some other tools, but now ncurses is of some older ve
Hello,
* Katinka Mills <[EMAIL PROTECTED]> [030526 18:15]:
> This is for the console, I just want to change it for a program I am writing
> :o)
Look at:
http://invisible-island.net/ncurses/ncurses-intro.html#introduction
http://tldp.org/HOWTO/NCURSES-Programming-HOWTO/
On Sat, 7 Dec 2002, Anselm Garbe wrote:
> Date: Sat, 7 Dec 2002 14:25:19 +0100
> From: Anselm Garbe <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Subject: ncurses based front-end for ports-collection?
>
> Hello *,
>
>does anyone know, if there's a graphica
Hello *,
does anyone know, if there's a graphical front-end (ncurses based) for the
ports-collection? If not I'm looking forward to develop one.
Following requirements should be supplied:
- different views for installed/available/upgradeable ports
- add/remove/upgr
"John Mills" <[EMAIL PROTECTED]> writes:
: Well maybe I was just lucky, but no such problem bit
: when I rebuilt and reinstalled RELENG_4_5 without a
: hitch, but I got exactly the same results you did
: with RELENG_4_6.
:
: It' a bit unsettling because
: 1) Presumably the build can be done succe
LEASE just crashed again on the very
> same spot :-( 2002.09.18.11.47.04| cc -fpic -DPIC -O -pipe -I. -
> I/usr/src/lib/libncurses -I\ /usr/src/lib/libncurses/../../contrib/ ncurses/ncurses -
> I/usr/src/lib/libn\ curses/../../contrib/ncurses/include -Wall -
> DFREEBSD_NATIVE -DNDE
eBSD are you trying to build?
> building profiled ncurses library
> ranlib libncurses_p.a
> [ stuff that worked in this build bit removed ]
> /usr/src/lib/libncurses/../../contrib/ncurses/ncurses/tinfo/alloc_entry.c -o
>alloc_entry.So
> cc: Internal compiler error: program cc
Here is my buildworld failure message
I don't have a clue :)
building profiled ncurses library
ranlib libncurses_p.a
[ stuff that worked in this build bit removed ]
cc -fpic -DPIC -O -pipe -I. -I/usr/src/lib/libncurses -
I/usr/src/lib/libncurses/../../contrib/ncurses/ncurses -
I/us
/../../contrib/ ncurses/ncurses -
I/usr/src/lib/libn\ curses/../../contrib/ncurses/include -Wall -
DFREEBSD_NATIVE -DNDEBUG -DHAV\ E_CONFIG_H -DTERMIOS -c
/usr/src/lib/libncurses/../../contrib/ncurses/ncu\ rses/tinfo/alloc_entry.c -o
alloc_entry.So 2002.09.18.11.47.05| cc: Internal compiler error: program
Hi,
centericq 4.7.2 doesn't work properly under xterm. I can't move the
cursor. First I thought it was an ncurses problem, but the midnight
commander works perfectly. Under gnome-terminal centericq works too,
but I don't want to use gnome, so that is not a solution.
Any id
39 matches
Mail list logo
