Hi!
I want do update my FreeBSD 4.4 using cvsup and to I`ll get do this at
night. But I`m using dialup and the connection could broken. My ppp
always redealing, but cvsup retry only after 15 minutes. Why it can`t
start after 1 or about minutes?
Thank You.
P.S: Sorry for my English.
To
Hi!
If I want to update my FreeBSD 4.4 to the latest version what should I
write in cvsupfile: tag=RELENG_4_5 (_4_6) or
tag=RELENG_4
Thank You
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
would you please type your reply either beneath or intermingled w/
another reply, not above it?
in message [EMAIL PROTECTED],
wrote Tony Sim thusly...
ahhh switch to NetBSD? is that as good as FreeBSD?
well, for one thing it does support card bus in its own stable
branch. it also runs on
On Thu, Jul 18, 2002 at 03:18:54PM +0400, Boris wrote:
If I want to update my FreeBSD 4.4 to the latest version what should I
write in cvsupfile: tag=RELENG_4_5 (_4_6) or
tag=RELENG_4
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/cvs-tags.html
The current release is 4.6,
subscribe
To eliminate the risk of malicious scripts
or code, *all* HTML email is automatically
_deleted_ UNREAD on receipt.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in
Bob Bomar wrote:
I was trying to install VMware 3.1 on my FBSD box, when I got to
the configureing part, it gave me this error:
[bob@warrior] ~sudo vmware-config.pl
Password:
Setup is unable to find the insmod program on your machine. Please make sure
it is installed. Do you want to
Hi, all-
Thanks to Joe Clarke's help I was able to get -much- closer to getting Gnome 2
all nice and ... done. Installed. Learned a lot about examining output for
clues in doing so, but this latest (last?) Gnome 2 make install error is
stumping me. Is this another example of old files left
Following the instructions at
http://www.freebsd.com.pl/tutorial_en/dialup-firewall/article.html, I've
got firewalling set up on a ppp connection.
The problem is that now I can't telnet or ftp into the BSD box from my
intranet (on dc0). Any ideas on what I did wrong or didn't do?
Also, for some
dear list members,
am i asking too much if i am looking for a free GUI firewall
that can allow at least four interfaces(4 networks) ?
any hint is most welcome
NDABARASA MIKE
*** CCNA(Cisco Certified Network Associate) ***
*** CCAI(Cisco Certified Academy Instructor) ***
National University of
The Digital 21140A chipset is PCI only, I believe. Anyhow, since
you've got that output, your kernel has recognised the card. It can't
however detect the ethernet heartbeat signal, either because a) you
haven't plugged it into the network correctly or b) because the card
or cables are
On Wed, 17 Jul 2002, Karl O . Pinc wrote:
There is no catch-phrase for BSD style license
Do what thou wilt shall be the whole of the license.
--
jan grant, ILRT, University of Bristol. http://www.ilrt.bris.ac.uk/
Tel +44(0)117 9287088 Fax +44 (0)117 9287112 RFC822 [EMAIL PROTECTED]
There's
Wednesday, July 03, 2002, 12:37:48 PM, you wrote:
B Hello!
B I`m using my FreeBSD 4.4 at home and as a result I have to use dial up for
B Internet. And while using ports I`m disconnecting and program didn`t
B download, I must to start again. It`s very uncomfortable for me, as a
B result I
You People ...
can you figure out a way to upgrade dist + kernel without rebooting ?
I had to ruin my perfect uptime :
[root@CyclopS:srcuptime
8:13AM up 107 days, 15:21, 1 user, load averages: 0.00, 0.04, 0.21
just for that
now it has the same uptime as all the other windows machines
On Wed, Jul 17, 2002 at 06:43:24PM +0100, Stacey Roberts wrote:
Hi,
I'm a hands-up newbie at web design and html stuff, but would like to
learn for my own amusement on my home system.
Is anyone able to recommend a nice informative and straight-forward
website design / building app from
Thursday, July 18, 2002, 12:47:34 PM, you wrote:
B Hi!
B I want do update my FreeBSD 4.4 using cvsup and to I`ll get do this at
B night. But I`m using dialup and the connection could broken. My ppp
B always redealing, but cvsup retry only after 15 minutes. Why it can`t
B start after 1 or
Hi,
I can't figure out how to use the dpms parameters in KDE (version 3.0.2,
build from ports recently). KDE seems to ignore the BlankTime/StandbyTime/
SuspendTime options in the XF86Config file, and the entry in the Control
Center (Power Control/Energy) that looks like it should handle this
mike ndabarasa wrote:
and how to get an easy and comprehensive HOWTO for the
syntax?
On Thu, 18 Jul 2002 07:46:37 -0400
Moti Levy [EMAIL PROTECTED] wrote:
mike ndabarasa wrote:
dear list members,
am i asking too much if i am looking for a free GUI
firewall
that can allow at least
sorry to send this twice but before i sent it w/out a subject.
Its not in the hardware list but i was wondering if anyone has set up
freebsd with a compaq nc6134 gigabit nic.
the card currently resides on a red hat 7 server.
Thanks,
Jeff Butler
To Unsubscribe: send mail to [EMAIL PROTECTED]
Hello!
I`m using my FreeBSD 4.4 at home and as a result I have to use dial up for
Internet. And while using ports I`m disconnecting and program didn`t
download, I must to start again. It`s very uncomfortable for me, as a
result I must use wget or other. Why not to add a future a resuming
Could somebody advise me where can I find the port
or package to balance loads of two modems attached to my FreeBSD system? I have
to provide connection to ISP server through two telephone lines with dynemic
balancing between them depending of load od each.
Thanks in advance.
Dmitry
On Wed, 17 Jul 2002, Sulaiman Khan wrote:
Hello,
I am currently working on BSD sockets and I am making a product compatiable
with BSD Sockets. Where can I find a complete list of the BSD Sockets API
and realated API.
Unix Network Programming, 2d Ed, Vol 1: Networking APIs
The book you
I ran xmcd on a different CD drive today in my 4.5 system since
racd0c wasn't available for the moment and got
the following errors:
CD audio: (pass2:ncr0:0:5:0): READ SUB-CHANNEL. CDB: 42 2 40 0 0 0 0 0 30 0
(pass2:ncr0:0:5:0): ILLEGAL REQUEST asc:24,0
(pass2:ncr0:0:5:0): Invalid field in CDB
By default, cdrom is /dev/acd0c is only mountable by root in FreeBSD. You
can make it mountable by normal users by changing the /etc/fstab entry to
users,ro,noauto
/dev/acd0c /cdrom cd9660 users,ro,noauto 0 0
Pavan Balaji,
Intel Corporation
Only the Paranoid
Upgrading my cups to 1.1.15.1 (through ports) seems to have broken my
printing. I now get errors like
I [18/Jul/2002:21:54:51 +1000] Job 325 queued on 'Stylus' by 'marauder'.
E [18/Jul/2002:21:54:51 +1000] Unable to convert file 0 to printable format for job
325!
in the logs.
On Thu, Jul 18, 2002 at 01:05:22PM +0200, Erik Mattsson wrote:
c) can be solved by adding 'media 10baseT' as an extra option to
ifconfig as exactly as you did for netbsd. It's pretty clear where to
put that in the Sysinstall dialog for configuring interfaces.
Where should I do this?
mike ndabarasa wrote:
dear list members,
am i asking too much if i am looking for a free GUI firewall
that can allow at least four interfaces(4 networks) ?
any hint is most welcome
NDABARASA MIKE
*** CCNA(Cisco Certified Network Associate) ***
*** CCAI(Cisco Certified Academy
I've got a deal going where I might be able to pick up a 4x 200MHz
PPro system w/ 1.5GB of RAM. Before I go out ant buy it, wanted to
know if anyone has installed FreeBSD on it and what kind of problems
they ran into when enabling SMP or Comapq's Raid controller support.
It will have an 4GB
In the last episode (Jul 17), Marc G. Fournier said:
I think in 5.0, there is an option to have this done on a reboot, but is
there a safe way of doing this in 4.6-STABLE? Where I can have it enabled
on reboot?
I add a tunefs -n enable /dev/da0s1a at the very top of /etc/rc,
reboot, then
I am trying to get my Handspring Visor to sync with freebsd stable using
anything. I am currently trying kpilot. I have added usb support to the
kernel and get the following in /var/log/messages when i attempt a sync:
Jul 19 00:20:29 sagan /kernel: ugen0: Handspring Inc Handspring Visor,
rev
IMHO, op is far superior to sudo.
On Wednesday 17 July 2002 03:04 pm, Tom Limoncelli wrote:
| Balaji, Pavan wrote:
| I wonder what exactly this means. I don't remember seeing any option for
| creating/not-creating the wheel group while installation.
|
| It means Install 'sudo' so that you get
On Thursday 18 July 2002 11:06 am, Brian T. Schellenberger wrote:
| IMHO, op is far superior to sudo.
Hmm . . . come to think of it, that's a little terse.
op is easy to configure, and it allows you give access to people not to
certain commands but to certain commands *only* with certain
- Original Message -
Thanks for the quick reply, Steve.
I suspect that since they were about to modify my laptop's win2k install
so that it started showing up in DNS, that there must be something doable
on the client-side alone, if only I knew what that was.
I have since rebooted
I'm thinking of installing OpenOffice, but noticed that the port says it
has beta quality. So I thought I'd throw it out to the list and see if
I could get some feedback. I'm running 4-stable if that makes a lot of
difference. Thanks.
--
-Jason Porter
Real programmers are secure enough
palm/coldsync in the ports works fine (visor over USB).
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Could somebody advise me where can I find the port or package to balance
=loads of two modems attached to my FreeBSD system? I have to provide
=connection to ISP server through two telephone lines with dynemic
=balancing between them depending of load od each.Thanks in
advance.Dmitry
Dear all
have you had experience to use zebra for routing?
Please give me any idea about it
Thank you
___
Do You Yahoo!?
Get your free @yahoo.com.hk address at http://mail.english.yahoo.com.hk
To Unsubscribe: send mail to
OK, here is /etc/resolv.conf:
search celera.com ad.celera.com rkv.ad.celera.com rkv.celera.com applera.com pe-c.com
ssf.ad.celera.com fc.celera.com
nameserver 172.20.7.10
nameserver 172.20.7.11
The search line there appears to be the result of adding a supercede
line to the dhclient.conf,
I posted this here a week ago, but got no responses. Is there a better list
I should direct this type of question to, a developers list for freebsd or
something? Any thoughts appreciated!
Jay West
- Original Message -
From: Jay West [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Tuesday,
Hi,
I am new to FreeBSD. What is the kernel memory allocation function in
FreeBSD ? ( the kernel equivalent of malloc )
sai
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Hi !!!
i want to backup a freeBSD server using the
arcserver client (uagent). But there is no client
for freebsd hosts. How can i do that
???
Can i use the linux client ???
Thanks all
Gustavo
Alle
Arcserve does have a unix client that should work. Information is
available on their website. www.cai.com
Hi !!!
i want to backup a freeBSD server using the arcserver client (uagent).
But there is no client for freebsd hosts. How can i do that ???
Can i use the linux client ???
Thanks
Are you using a special Dynamic DNS update client, or relying on some
functionality in dhclient? Is the DHCP server a MS DHCP server, that
could update AD/DNS for you? It seems from your ping that the DNS entry
which your Win2k side registers lingers for a little while, long enough
for you
From: David Merriman [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, July 18, 2002 3:58 AM
Subject: subscribe
subscribe
To eliminate the risk of malicious scripts
or code, *all* HTML email is automatically
_deleted_ UNREAD on receipt.
Hi again,
Just wanted to double check with you all to make
sure there was nothing else to try.
PROBLEM: Brand NEW Western Digital 40 GB Hard
Drive in a Pentium 133 with an ASUS TXP4 motherboard with the newest BIOS picks
up my 40 GB drive in the BIOS as a 33 GB or something close. When I
On Thu, 2002-07-18 at 05:07, Daniel Bye wrote:
On Wed, Jul 17, 2002 at 06:43:24PM +0100, Stacey Roberts wrote:
Hi,
I'm a hands-up newbie at web design and html stuff, but would like to
learn for my own amusement on my home system.
Is anyone able to recommend a nice informative and
Hallo everyone out there
I would like ask stupid question (hehehe)
What exactly details/meaning of
cloned_interfaces=# List of cloned
network interfaces to create.
in /etc/default/rc.conf ?
Thank You
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions
Hello,
I have a problem. When upgrading my openssh-portable, it fails to install
when it tries to chmod 0700 /var/empty, which gives the error message:
Operation not permitted. The permissions on /var/empty are 0555. When I
tried to rm -rf /var/empty, it fails with the same error message. My
Thanks that did the trick. Of course, now, kdm won't run out of /etc/ttys,
but that's not a big deal as I only use it on the console anyway.
Sure appreciate your help.
Nate
Initially I had no problems with the terminal programs, but now both
'konsole' and 'gnome-terminal' error on startup.
On Thu, Jul 18, 2002 at 12:49:17PM -0600, Seth Hieronymus wrote:
Hello,
I have a problem. When upgrading my openssh-portable, it fails to install
when it tries to chmod 0700 /var/empty, which gives the error message:
Operation not permitted. The permissions on /var/empty are 0555. When I
I apologize for filling up a lot of mail boxes, but I need some help, and I
have no idea of where to look for answers but here.
My problem is this : every once in a while, the computer hangs for a minute
or two, then reboots. At one point, it felt like it had something to do
with the APM, so I
On Thu, Jul 18, 2002 at 12:49:17PM -0600, Seth Hieronymus wrote:
Hello,
I have a problem. When upgrading my openssh-portable, it fails to install
when it tries to chmod 0700 /var/empty, which gives the error message:
Operation not permitted. The permissions on /var/empty are 0555. When I
Daniel Bye wrote:
On Thu, Jul 18, 2002 at 12:49:17PM -0600, Seth Hieronymus wrote:
Hello,
I have a problem. When upgrading my openssh-portable, it fails to install
when it tries to chmod 0700 /var/empty, which gives the error message:
Operation not permitted. The permissions on
Something is overheating inside your box because of dust build up or your
power supply is failing.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Joseph Lewis
Sent: Thursday, July 18, 2002 3:18 PM
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject:
On Thu, Jul 18, 2002 at 10:03:12AM -0700, Paul English wrote:
I've had different experiences installing upgrades from ports
while users are using the software. I'm particularly concerned with
XFree86. /usr/X11R6 is being served from a central NFS server and all of
the clients are using
Hi All,
I am looking to customize the post-install process of a custom FreeBSD 4.6
server. I would like to install some custom packages when a root user logs
in to the system for the first time after a fresh install.
If I knew where in the install CD1, the actual creation of root's .cshrc
On Thursday 18 July 2002 20:09, Daniel Bye wrote:
On Thu, Jul 18, 2002 at 07:15:10AM -0700, Balaji, Pavan wrote:
By default, cdrom is /dev/acd0c is only mountable by root in FreeBSD. You
can make it mountable by normal users by changing the /etc/fstab entry to
users,ro,noauto
The FBSD Version 4.5 built in DHCP client would display the DHCP
ip address, mask, broadcast ip address, dns ip address it
got during the boot startup process.
The new FBSD 4.6 version just displays the following message
'Doing initial network setup: Hostname'
How do I get the FBSD 4.6 built
there is no such parameter passable to mount called users. it needs to
be removed. if you can mount it from the command line, you should make
the fstab line agree with it, and i see no reason why it wouldn't then
work.
keep in mind that in your fstab, you are attempting to mount the CDROM
onto
I'm have a FBSD 4.6 box connected to the internet using a cable modem.
I use the DCHP client that comes as part of the basic install to auto
configure the FBSD box with it's ISP assigned dynamic public ip address
and it's DNS ip address. The box act like everything is configured
correctly
check out /usr/share/skel/dot.cshrc
-Adam
(07.18.2002 @ 1338 PST): Raja Velu said, in 0.6K:
Hi All,
I am looking to customize the post-install process of a custom FreeBSD 4.6
server. I would like to install some custom packages when a root user logs
in to the system for the first
Hello,
how can one activate the Linux-Flash-plugin in Mozilla?
-Hanspeter
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Joe,
The FBSD Version 4.5 built in DHCP client
FYI, that's ISC's DHCP client.
would display the DHCP ip address, mask, broadcast ip address, dns ip
address it got during the boot startup process. The new FBSD 4.6 version
just displays the following message 'Doing initial network setup:
On Thursday 18 July 2002 23:20, Adam Weinberger wrote:
there is no such parameter passable to mount called users. it needs to
be removed. if you can mount it from the command line, you should make
the fstab line agree with it, and i see no reason why it wouldn't then
work.
keep in mind that
When I attempt to make a sock_stream connection to an IP, and DON'T
receive an ACK or RST response, it seems that the system retries a finite
number of times by sending additional SYN packets. There also looks to be
a 3 or 6 second delay between SYN retries. After four or five, the
connection
I had originally applied the patch for the ssh vulnerability but now was
trying to upgrade to the new version of openssh. I got all the dependencies
satisfied but openssh is giving me an error message that:
OpenSSL headers do not match you library.
I searched around and found something on the
Hey guys and gals,
I'm just looking for an oppinion on using CCD for stripping on two
IDE drives. Anybody have anything to say about performance, reliability,
manageability and so on?
Thanks A Lot,
Christopher J. Umina
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe
user localhost doesn't have access to read from /dev/acd0c.
-Adam
(07.18.2002 @ 1245 PST): Steve Mazerski said, in 3.5K:
On Thursday 18 July 2002 23:20, Adam Weinberger wrote:
there is no such parameter passable to mount called users. it needs to
be removed. if you can mount it from the
ôÒÁÎÓÐÏÒÔÎÏ-ÜËÓÐÅÄÉÃÉÏÎÎÁÑ ÓÌÕÖÂÁ óôéìø ôòáîó
ðÒÉÇÌÁÛÁÅÔ Ë ÓÏÔÒÕÄÎÉÞÅÓÔ×Õ É ÐÒÅÄÌÁÇÁÅÔ ÐÒÏÆÅÓÓÉÏÎÁÌØÎÕÀ ÐÏÍÏÝØ ÐÏ ÏÔÐÒÁ×ËÅ ÷ÁÛÉÈ
ÇÒÕÚÏ× ÉÚ íÏÓË×Ù Ö. Ä. ÔÒÁÎÓÐÏÒÔÏÍ ×Ï ×ÓÅ ÇÏÒÏÄÁ òæ ÐÏÞÔÏ×Ï-ÂÁÇÁÖÎÙÍÉ ×ÁÇÏÎÁÍÉ. 3, 5,
20 ÔÏÎÎÙÍÉ ËÏÎÔÅÊÎÅÒÁÍÉ, ÐÏ×ÁÇÏÎÎÙÍÉ ÏÔÐÒÁ×ËÁÍÉ
On Thursday 18 July 2002 11:04 am, Shaun Branden wrote:
I am trying to get my Handspring Visor to sync with freebsd stable using
anything. I am currently trying kpilot. I have added usb support to the
kernel and get the following in /var/log/messages when i attempt a sync:
Jul 19 00:20:29
On Friday 19 July 2002 00:15, Adam Weinberger wrote:
user localhost doesn't have access to read from /dev/acd0c.
-Adam
user localhost is in group operator, and /dev/acd0c
is readable by group operator:
localuser@localhost ls -l /dev/acd0c
crw-rw 4 root operator 117, 0 Jul 14
On Thu, Jul 18, 2002 at 11:04:56AM -0700, [EMAIL PROTECTED] wrote:
Hallo everyone out there
I would like ask stupid question (hehehe)
What exactly details/meaning of
cloned_interfaces=# List of cloned
network interfaces to create.
in /etc/default/rc.conf ?
According to the
Christopher J. Umina wrote:
Hey guys and gals,
I'm just looking for an oppinion on using CCD for stripping on two
IDE drives. Anybody have anything to say about performance, reliability,
manageability and so on?
Thanks A Lot,
Christopher J. Umina
I have never tried CCD, but
Hi folks
I am upgrading gcc as required by the gnustep tools I want to use, and have
a couple of questions:
1. What is the latest port release? I assume it's 3.0.4, since the 3.1 in
the ports appears to have a snapshot of the 3.1 cvs source, even though
gcc.gnu.org lists it as released as of
On Thu, 18 Jul 2002, Hanspeter Roth wrote:
how can one activate the Linux-Flash-plugin in Mozilla?
It only works on linux-mozilla, of course, but I think the port sets it
up:
# cd /usr/ports/www/linux-flashplugin
# make
# make install
If that doesn't do it, you can just symlink the files:
#
7/18/2002 8:07:21 PM, Jim McLoughlin
[EMAIL PROTECTED] wrote:
Hi folks
I am upgrading gcc as required by the gnustep tools I want to use, and
have
a couple of questions:
1. What is the latest port release? I assume it's 3.0.4, since the 3.1 in
the ports appears to have a snapshot of the 3.1
Me again.. Just had a call from the RTFM daemon:
To answer my own questions...
I moved /var to a larger partition (see
http://www.freebsddiary.org/file-system-full.php for a HOW-TO)
Questions:
- I presume pkg_add puts temporary files in /var. Is this normal /
sensible?
pkg_add uses
ôÒÁÎÓÐÏÒÔÎÏ-ÜËÓÐÅÄÉÃÉÏÎÎÁÑ ÓÌÕÖÂÁ óôéìø ôòáîó
ðÒÉÇÌÁÛÁÅÔ Ë ÓÏÔÒÕÄÎÉÞÅÓÔ×Õ É ÐÒÅÄÌÁÇÁÅÔ ÐÒÏÆÅÓÓÉÏÎÁÌØÎÕÀ ÐÏÍÏÝØ ÐÏ ÏÔÐÒÁ×ËÅ ÷ÁÛÉÈ
ÇÒÕÚÏ× ÉÚ íÏÓË×Ù Ö. Ä. ÔÒÁÎÓÐÏÒÔÏÍ ×Ï ×ÓÅ ÇÏÒÏÄÁ òæ ÐÏÞÔÏ×Ï-ÂÁÇÁÖÎÙÍÉ ×ÁÇÏÎÁÍÉ. 3, 5,
20 ÔÏÎÎÙÍÉ ËÏÎÔÅÊÎÅÒÁÍÉ, ÐÏ×ÁÇÏÎÎÙÍÉ ÏÔÐÒÁ×ËÁÍÉ
Hi,
I am having difficulty Authenticating IMAP/POP3 services
vs. and LDAP server under FreeBSD.
My Environment:
4.6-RELEASE-p1
Openldap 2.0.25
UW imap-2001a
pam_ldap-150 (from padl.com)
I have successfully gotten ftp/ssh/telnet to authenticate
I installed ( or so I thought ) a chroot env last night and ran into some
difficulties. Could someone very familiar with openssh/chroot glance
over http://probsd.ws/chroot.txt and tell me what I did wrong please?
chroot.txt is an EXTREMELY detailed example of what I did, and script
output of
Hi guys. I have about 15 ports which fail to build all with the same error:
checking for i386-portbld-freebsd4.6-gcc... cc
checking for C compiler default output... configure: error: C compiler cannot create
executables
as far as I could debug it, it seems that conftest.c is actually
Dear FreeBSD,
I am using the FreeBSD 4.5 to configure my Web Server, however, I don't
know how to configure the tcp_wrapper to allow the telnet service.
Please advise is there anu manual or references for the telnet function.
Thanks
Stanley
To Unsubscribe: send mail to [EMAIL PROTECTED]
How very interesting...
For a start, you can't copy devices with cp--you need something
smarter like tar, cpio, ... Pretty much anything that could
be used for backups should understand the niceties of copying a
device. As an alternative you could use mknod to create them.
Here is how to do it
Hi guys. I have about 15 ports which fail to build all with the same error:
checking for i386-portbld-freebsd4.6-gcc... cc
checking for C compiler default output... configure: error: C compiler cannot create
executables
as far as I could debug it, it seems that conftest.c is actually
/etc/host.conf:
hosts
bind
/etc/hosts:
127.0.0.1 localhost.home localhost
192.168.144.254mydomaindaemon
/etc/resolv.conf:
domain home
nameserver 206.104.144.4
nameserver 206.104.144.3
Edit /etc/ppp/ppp.conf:
# PPP Configuration
default:
set log Phase Chat LCP IPCP
Dear sir,
1. what can I do if I forgot the login name and
password which defalt loading to FreeBSD?
2. How can I remove FreeBSD if I can't login?
Please help.
Karen
__
Do You Yahoo!?
Yahoo! Autos - Get free new car price quotes
On Wed, Jul 17, 2002 at 04:37:34PM -0700, Michael Wells wrote:
I also have the problem that the KVM must be set to the machine being
booted
in order for the mouse and keyboard to work properly. This is a know
problem
and there was discussion on it. The problem seems to have
http://www.freebsd.org/doc/faq/admin.html#FORGOT-ROOT-PW
-Adam
(07.18.2002 @ 2048 PST): karen ko said, in 0.4K:
Dear sir,
1. what can I do if I forgot the login name and
password which defalt loading to FreeBSD?
2. How can I remove FreeBSD if I can't login?
Please help.
Karen
karen ko wrote:
Dear sir,
1. what can I do if I forgot the login name and
password which defalt loading to FreeBSD?
2. How can I remove FreeBSD if I can't login?
Please help.
You can most likely boot to single user mode and change the password
from there.
Kent
--
Kent
I haven't looked over what you've done all that thoroughly, but here's
some starters:
The first thing I would do is to turn up your server log level and have a
look at what it says. It's an option in the sshd config file.
I take it you didn't install 'su' in your chroot area. 'sh'?
You very
Please comment. Thanks.
Karl [EMAIL PROTECTED]
Soliciting comment from:
[EMAIL PROTECTED], [EMAIL PROTECTED], [EMAIL PROTECTED]
---snip
Software License Sound Bites
Version 0.2
-Original Message-
From: Joe Fhe Barbish [mailto:[EMAIL PROTECTED]]
Sent: Thursday, July 18, 2002 8:00 PM
To: David Merriman
Subject: RE: ppp Firewall - can't telnet/ftp from intranet
Your rc.conf shows you are using both natd and ppp nat. You
can only use one
of those to
TCP traffic as such does not get any priority over UDP traffic, but the way
in which the TCP messages are sent (Data Streaming) is different from the
way UDP messages are sent (Datagram).
In essense, UDP messages wait till there's enough space for the entire
message before the message is added
Hi ,
Can any one tell me how to start and stop sshd (and inetd) without rebooting
the system.
Thanks
ah.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
ps for all processes. grep for sshd or inetd. kill the process. to start
sshd, type sshd. to start inetd, type inetd.
read the man pages for these things. sshd(8) and inetd(8).
-Adam
(07.18.2002 @ 2241 PST): Akthar Hussain said, in 0.2K:
Hi ,
Can any one tell me how to start and stop
94 matches
Mail list logo
