la# apachectl start
/usr/local/sbin/apachectl start: httpd could not be started
la#
Apart from configtest are there any other ways to investigate this problem?
Have you checked Apache's error_log?
--
Toomas Aas | [EMAIL PROTECTED] | http://www.raad.tartu.ee/~toomas/
* What happens if you get
Hi!
I tried a simple ping to the IP address of the nameserver and am getting
this:
# ping 66.135.144.2
PING 66.135.144.2 (66.135.144.2): 56 data bytes
ping: sendto: No route to host
I looked at my /etc/rc.conf and there's only one line related to router or
Hi Jonathon,
On Wed, Oct 30, 2002 at 01:58:23AM +, Jonathon McKitrick wrote:
Here's what I have so far:
-
Program terminated with signal 11, Segmentation fault.^M
[snip]
#0 0x80b4545 in WMGetFromPLDictionary (plist=0x0, key=0x8137b50)^M
---Type return to
On Tue, Oct 29, 2002 at 10:09:51PM -0800, Safman wrote:
I am a new user to FreeBSD and am trying to install it for the first
time. I am installing on a hard disk with two partitions: One already
has Windows, the other will soon have FreeBSD.
I want to install FreeBSD using CD's, but it
# [EMAIL PROTECTED] / 2002-10-29 23:27:34 -0800:
XFree86 exits on signal 11 immediately after starting on FreeBSD 4.6 and
4.7. It is not possible to run the graphical configuration utility at all.
After running curses configuration utility, running startx produces signal
11. No other
XFree86 exits on signal 11 immediately after starting on FreeBSD 4.6 and
4.7. It is not possible to run the graphical configuration utility at all.
After running curses configuration utility, running startx produces signal
11. No other debugging information is available. No other messages
On Wed, Oct 30, 2002 at 02:34:22AM -0800, Paul A. Scott wrote:
Yes, I should think so. Again, XFree86 as delivered with FreeBSD 4.5 and
earlier run fine on the same exact machine with no changes in hardware.
The problem only occurs beginning with FreeBSD 4.6 when the individual X
servers
The problem only occurs beginning with FreeBSD 4.6 when the individual X
servers were bundled together, and it continues to fail on FreeBSD 4.7.
Furthermore, searching the archives I find that other people have the same
problem beginning with the FreeBSD 4.6 CDROM on different hardware.
The
On 2002-10-27 01:40, [EMAIL PROTECTED] wrote:
-- Original Message --
Date: Sat, 26 Oct 2002 19:31:06 -0400
From: Michael Joyner [EMAIL PROTECTED]
If we were to say move to a more modular styled base system, we
shouldn't have to REMOVE the daemons, simply have them either easy
to [x] check
- Original Message -
From: Jens Rehsack [EMAIL PROTECTED]
To: Ivan Sychev [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Tuesday, October 29, 2002 9:00 PM
Subject: Re: FBSD doesn't install from CDROM Creative Infra 54
My CDROM attached as primary device on controller and i`m booting
What you want is the defaultrouter -- That tells the system where packets
should be directed that aren't for the local LAN. (IE: anything not in
192.168.x.x)
in rc.conf, add:
defaultrouter=0.0.0.0
change 0.0.0.0 to point to the SMC Router's IP (It's acting as a gateway
for your network, if
Hi,
anyone tried to build www/oops or print/teTeX after update
of bison?
System:
goshik# uname -a
FreeBSD goshik.binep.ac.ru 4.7-STABLE FreeBSD 4.7-STABLE #10: Sun Oct 27 15:02:15 MSK
2002
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GO i386
goshik#
Both ports fail compilation when bison is
Matthew Seaman [EMAIL PROTECTED] writes:
The matcd driver was for an old non-standard device once produced by
Matsushita. Certainly if you're using a recently produced CD drive,
it will be a standard ATAPI or SCSI device and it should be recognised
automatically by the install process. No
Hi
Ive installed the apache-1.3.26_3 port and trying to get it to work with TWiki
(an intranet discussion/note board). But I cant limit the access of the sites.
Ive made the following test:
created a test dir in the DocumentRoot directory.
In this directory Ive created a index.html file that the
Thank you for your email.
I will reply to you as soon as possible.
Gracias por su mensaje. Le contestarémos lo mas pronto posible.
Merci de votre message. Il fait l'objet d'un examen pour traitement.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of
- Original Message -
From: Jens Rehsack [EMAIL PROTECTED]
To: Ivan Sychev [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Wednesday, October 30, 2002 12:20 PM
Subject: Re: FBSD doesn't install from CDROM Creative Infra 54
1st:
DEGUG: Generating /etc/fstab file
acd0: READ_BIG -
On Wed, 30 Oct 2002, Ivan Sychev wrote:
Subject: Re: FBSD doesn't install from CDROM Creative Infra 54
- Original Message -
From: Jens Rehsack [EMAIL PROTECTED]
To: Ivan Sychev [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Wednesday, October 30, 2002 12:20 PM
Subject: Re: FBSD
I've searched the web (and am still searching), but for the life of me, I
can't get ssh-agent 'active' when using kdm for the login manager ...
I've tried setting up a simple .xsession file:
cat .xsession
ssh-agent startkde
eval `ssh-agent -k`
but that doesn't appear to work ...
help?
To
Hi all,
How can I set quota for all users? This command I was using doesn't seem
to work for me any more. Can anyone please recomend me any good package(s)
that set and monitor user quotas and send them warnings automatically?
edquota -p someone `awk -F: '$3 1000 $3 65534 {print $1}'
You most likely need a DIRECTORY directive in your httpd.conf
Something like:
Directory /usr/local/test
Options Indexes FollowSymLinks MultiViews
AllowOverride AuthConfig Limit
Order allow,deny
Allow from all
/Directory
restart apache and see how it goes.
Good Luck!
Mohsin
On Wed, Oct 30, 2002 at 11:16:15AM -0400, Marc G. Fournier wrote:
I've searched the web (and am still searching), but for the life of me, I
can't get ssh-agent 'active' when using kdm for the login manager ...
I've tried setting up a simple .xsession file:
cat .xsession
ssh-agent
hello,
does anyone know of a good shopping cart system that will work with
freebsd?
thanks
terry allen
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Dear list,
I have seen that there is building issue with Compaq's SMP boards. I would
like to add my story to it in hopes of receiving some help.
Compaq ML-530 2.2GHz P4 Xeon
4.7-RELEASE
Locking up at point of launching 2nd CPU.
I have tried to use different OS's in the BIOS, e.g. Netware
Hello,
Is it possible to share a scanner over TCP/IP with a OSX box or another
FreeBSD box?
Thanks,
Alex
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
I'm considering fishcart, but haven't implemented yet.
It requires php and one of a few databases including
MySQL, PostGre, etc.
I've not put the time in to get it to work...not that
it's tremendously difficult, but I like to read as much
as possible before putting in much time. Also,
my client,
I was trying to install snort following the instructions on a doc on snort's
website.
http://www.snort.org/docs/FreeBSD46...MySQLVer1-2.pdf
Anyways, I get to the point where I have to type
/usr/local/bin/mysql -p
/usr/ports/security/snort/work/snort-1.8.6/contrib/create_mysql snort
I get the
yes
take a look sane-backends net driver
Quoting Alex Teslik [EMAIL PROTECTED]:
Hello,
Is it possible to share a scanner over TCP/IP with a OSX box or another
FreeBSD box?
Thanks,
Alex
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body
Hi all,
Over the past few weeks I have been setting up and tweaking DUMP to dump
each of my 4 main filesystems (/ /var /home /usr). Progress is going well
(currently set to do full dump 1x per week and do a level 1 each night). I
still have a couple of questions.
First, I am dumping all
Sorry all, the previous mail was sent prematurely...
Hi all,
Over the past few weeks I have been setting up and tweaking DUMP to dump
each of my 4 main filesystems (/ /var /home /usr). Progress is going well
(currently set to do full dump 1x per week and do a level 1 each night). I
still
Marc G. Fournier [EMAIL PROTECTED] writes:
I've searched the web (and am still searching), but for the life of me, I
can't get ssh-agent 'active' when using kdm for the login manager ...
The relevant bit from *my* .xsession file is:
# A bunch of things to run with access to the ssh agent.
Hello,
I am looking for a lightweight web server with php support to set up on
my FreeBSD system.
It is very likely that the only use for that web server will be
phpMyAdmin so it should be multithreading and all that stuff. I want
something small and very fast (i have a k6-2 500MHz system). If
Hi,
We have used several shooping cart programs and the best one we have found
so far is xcart. It has a ton of options, including skins Site admin,
reseller admin.
It requires PHP, MySQL and Apache. It also handles using a seperate SSL
site in case the customer is to cheap or unable to get
I've never seen great reason to use anything other than Apache. Might not
fit your 'lightweight' tag, but it's not particularly taxing on resources,
and anyway the PHP element of your use is likely to the most resource
intensive.
Cheers
- Barry
--
Barry Byrne, IT Manager,
WBT Systems, Block 2,
On Wed, Oct 30, 2002 at 11:38:59AM -0600, Kenzo wrote:
I was trying to install snort following the instructions on a doc on snort's
website.
http://www.snort.org/docs/FreeBSD46...MySQLVer1-2.pdf
Anyways, I get to the point where I have to type
/usr/local/bin/mysql -p
On Wed, 30 Oct 2002, Rotaru Razvan wrote:
Date: Wed, 30 Oct 2002 09:38:06 -0800 (PST)
From: Rotaru Razvan [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: looking for a lightweight web server
Hello,
I am looking for a lightweight web server with php support to set up on
my FreeBSD
In the last episode (Oct 30), Alex Teslik said:
Hello,
Is it possible to share a scanner over TCP/IP with a OSX box or another
FreeBSD box?
The SANE scanner package supports remote device access and builds on
FreeBSD (ports /graphics/sane-*) and MacOS X.
http://www.mostang.com/sane/
--
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
(10.30.2002 @ 0948 PST): Grant Peel said, in 0.3K:
Hi,
You may consider webmin. I uses its own miniserv.pl which hasn;t let me down
yet. It also comes with PHP my admin, and it sounds like some of the other
default modules might be of use to
I've never implemented any.. but here are some links:
http://www.fishcart.org/
http://www.agora.com
http://www.minivend.com
http://www.weberdev.com/index.php3?GoTo=LinkIndexInner.php3?CatID=76CatName
=Shopping+Cart+Solutions
http://www.opensales.org
Good Luck!
Mohsin Rahman
- Original
Well you are going to need CGI support for PHP, unless PHP have made a
module for your webserver.
But Apache can be set up to eat little amounts of resources even though a
500mhz would be more than able to handle the default apache config.
Hope this helps
Andrew
- Original Message -
--- John Bleichert [EMAIL PROTECTED] wrote:
On Wed, 30 Oct 2002, Rotaru Razvan wrote:
Date: Wed, 30 Oct 2002 09:38:06 -0800 (PST)
From: Rotaru Razvan [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: looking for a lightweight web server
Hello,
I am looking for a
Well apache isn't quite lightweight. I was hoping to find something
small, that eats as few recources as possible. I don't need cgi
support, perl and other stuff like that. Only html+php.
It's not like i don't like apache. I just think it's not suited for my
kind of application.
If you still
On 2002-10-27 12:38, budsz [EMAIL PROTECTED] wrote:
I was try last night to split/create new windows in BitchX for example
I typed /windows new hide in BX prompt and then I switched to other
window using alt+1, alt+2 etc but nothing happend (doesn't switch),
Try using ESC+1, ESC+2, etc.
Yes
On 2002-10-27 02:23, master [EMAIL PROTECTED] wrote:
when i try to config it it say :
./usr/libexec/elf/ld cannot find -lresolv
and if i say in the conf no lib it don t work too
anyone has a idea plz?
What are you trying to config?
How are you trying to configure it?
When asking questions,
At 08:45 AM 10/30/2002, public relations wrote:
hello,
does anyone know of a good shopping cart system that will work with
freebsd?
thanks
terry allen
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
http://www.oscommerce.com/
Sorry all, the previous mail was sent prematurely...
Hi all,
...
In effect, I want to create a mirror, will this work, and would the command
lines (in cron) look like:
dump -0u -h0 -f /dev/ad0s1 /
dump -0u -h0 -f /dev/ad0s1/var /var
dump -0u -h0 -f /dev/ad0s1/usr /usr
dump -0u
On 10/30/02 at 9:38 AM Rotaru Razvan wrote:
|I am looking for a lightweight web server with php support to set up |on
my FreeBSD system.
|It is very likely that the only use for that web server will be
|phpMyAdmin so it should be multithreading and all that stuff. I want
|something small and very
Howdy peeps,
I've got a not-so-quick question for ya:
I have a Sony AIT tape drive (one of the nifty 4 tape autoloaders): TSL-SA300C
It has a nice little display on the front that indicates the tape's wound
status. When the tape is fully rewound, the bar graph is full. When the tape
is fully
Hello,
Sorry about asking this here, but I've googled, read (over and
over) the Samba How-To included with the source distro, run through the
diagnostics.txt test doc successfully, and finally trolled various
posting to samba lists at http://marc.theaimsgroup.com, and haven't been
able to
On 10/30/02 at 9:38 AM Rotaru Razvan wrote:
I am looking for a lightweight web server with php support to set
up on my FreeBSD system. It is very likely that the only use for
that web server will be phpMyAdmin so it should be multithreading
and all that stuff.
I want something small and very
i have find the solution thx anyway
- Original Message -
From: Giorgos Keramidas [EMAIL PROTECTED]
To: master [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Wednesday, October 30, 2002 2:17 PM
Subject: Re: problem config ircd entrechat
On 2002-10-27 02:23, master [EMAIL PROTECTED]
If your having performance problems, how about posting your ps aux output
for us and a few examples of your load averages.
eric
- Original Message -
From: Paul Everlund [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Wednesday, October 30, 2002 2:09 PM
Subject: Re:
Hi.
I'm trying to figure out how this works:
I've got a Sony AIT autoloader, model TSL-SA300C. It's a four tape changer.
In my dmesg.boot, it show the changer as a 'pass2' device, but not a 'ch'
device.
So, I guess my two questions are:
How do I use this changer as a 'pass' device? (couldn't
Thomas Weber wrote:
Hi,
since upgrading to 4.7-STABLE, java (means java, javac) runs only as
root.
I've tested it with linux-sun-jdk1.4.1_01, linux-sun-jdk1.4.0 and
linux-blackdown-jdk1.4.1, always i'm getting this message:
hi, i would like to know how ircd check for dns ?
i have this error Couldn't resolve your hostname; using your IP address
instead
but if i try to nslookup all is good it s only with ircd anyone has already
had this matter and solve it?
thx
To Unsubscribe: send mail to [EMAIL PROTECTED]
with
Sorry to ask such a stupid question, but, I can't
remember the command.
Sometimes, under X, a task opens with the top bar
off the screen. Then, my mouse can no longer
grab the task at the top.
There is a commmand that allows the user to click
on the task, and move it. I've used it before.
Kris said
Well, for starters the snort 1.8.7 work subdirectory is called
snort-1.8.7 not snort-1.8.6, but if the entire work directory is
missing then you've omitted a step where you 'cd
/usr/ports/security/snort; make all install' to actually build and
install snort.
This is what I did.
make
On 2002-10-29 19:26, Chris Pressey [EMAIL PROTECTED] wrote:
On Tue, 29 Oct 2002 14:28:39 +
Matthew Seaman [EMAIL PROTECTED] wrote:
I think what has happened is that one or more of the Makefiles in the
src tree hasn't been updated properly, possibly because cvsup(1)
doesn't think it
On 2002-10-29 12:36, Michael Ross [EMAIL PROTECTED] wrote:
It took about 1.5 hrs for the CVSUP from 4.6.0 to 4.7, and another 2
hours for the build (on a P3-500 with 128MB RAM).
That seems a little bit long, was that the only CVSUP you did
between the two? you might be able to speed things
press and hold down the ALT key
then left-click-hold anywhere in the window
with the mouse
move window
release all the buttons
Quoting steve ellis [EMAIL PROTECTED]:
Sorry to ask such a stupid question, but, I can't
remember the command.
Sometimes, under X, a task opens with the top bar
off
¡@
¥[¤J·|û´N°e§Aªx¨Èªù¸¹
§K168¤¸¤ë¯²¶O¡B§K399¤¸³]©w¶O¡B¨C¤ë¦A°e17.5¤ÀÄÁ³q¸Ü®É¼Æ¡C
¨CÓªù¸¹¨CÓ¤ë¦A°e±z168¤¸³q¸Ü¶O¡A°e¨¬24Ó¤ë=4032¤¸
¨CÓ¤H³Ì¦h¥i¥Ó½Ð¤TÓªù¸¹¡A24Ó¤ë¥i¬Ù12096¤¸³q¸Ü¶O¡I
1. ¥þ°Ï³q¸Ü¡AµL½×¥ô¦ó¦a¤è»Pªx¨Èªù¸¹³£¥Hºô¤º¤¬¥´¶O²vpºâ¡A¶O²v³Ì§C¡C
2.
Dear Mr./Ms. 'GWAVA',
My email was a technical question sent to
[EMAIL PROTECTED]
It has been answered. I'm sorry the FreeBSD.ORG
technical questions are being missent to you.
My note had an email address, as shown above,
in case a spam filter is actng up.
Steve Ellis
GWAVA wrote:
I am attempting to create a simple user shell executable which will
execute a root command.
Executing;
su root killall squid
requests root's password, and then issues a;
killall: /usr/bin/killall: cannot execute binary file
while killall executes by root no problem.
Any idea what's going on
Eric Anderson [EMAIL PROTECTED] writes:
131/32768/32768 mbuf clusters in use (current/peak/max)
You ran out of mbuf clusters at some point.
How can I fix this?
Add kern.ipc.nmbclusters=65536 to /boot/loader.conf and reboot.
BTW, -chat is not the appropriate forum for this kind of question.
Dag-Erling Smorgrav wrote:
Eric Anderson [EMAIL PROTECTED] writes:
131/32768/32768 mbuf clusters in use (current/peak/max)
You ran out of mbuf clusters at some point.
What part of the netstat -m indicated this?
How can I fix this?
Add kern.ipc.nmbclusters=65536 to /boot/loader.conf
Eric Anderson [EMAIL PROTECTED] writes:
Dag-Erling Smorgrav wrote:
Eric Anderson [EMAIL PROTECTED] writes:
131/32768/32768 mbuf clusters in use (current/peak/max)
You ran out of mbuf clusters at some point.
What part of the netstat -m indicated this?
Well, duh. The part I quoted.
DES
--
Dag-Erling Smorgrav wrote:
Eric Anderson [EMAIL PROTECTED] writes:
Dag-Erling Smorgrav wrote:
Eric Anderson [EMAIL PROTECTED] writes:
131/32768/32768 mbuf clusters in use (current/peak/max)
You ran out of mbuf clusters at some point.
What part of the netstat -m indicated this?
Well,
Eric Anderson [EMAIL PROTECTED] writes:
Sorry. I'm a dumbass.
We all have our moments :)
DES
--
Dag-Erling Smorgrav - [EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Hello there ...
i've configurated my tunnel ip4-ip6 by typing:
$ifconfig gif0 create
$ifconfig gif0 tunnel 193.137.232.35 193.136.2.2
$ifconfig gif0 inet6 alias 2001:690:2024::1
then i check if the tunnel is woeking by :
$ping6 ff02::1%gif0
and the result was a serals of reply's
then i do
JR == Jens Rehsack [EMAIL PROTECTED] writes:
JR It's most a good thing sending your patch directly to David
JR Chapman (maintainer). He's very fast commiting bug fixes :-)
Did that, too. ;-)
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the
I have my eye on an external IDE enclosure with a firewire interface.
Does FreeBSD support firewire? I've looked in the hardware notes for
4.7-RELEASE and do not see any listing so I'm assuming it's not
supported. Can anyone clarify this for me as I am very interested in
the enclosure as it
I added that link to /etc/rc.conf. Is there a way to reload this file
without rebooting?
Not AFAIK. You can get the same result by manually loading the route:
route add default 0.0.0.0
where 0.0.0.0 is the SMC router's IP addy.
That worked!! I added the route to my SMC router and now DNS
i would like to rename the actual mp3 files
- Original Message -
From: Eric Humphries [EMAIL PROTECTED]
To: Brian Henning [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Wednesday, October 30, 2002 1:22 PM
Subject: Re: mp3 file renamer
So are you looking for a tool to rename the
Here are just a few:
Port: id3tool-1.1f
Path: /usr/ports/audio/id3tool
Info: A utility for manipulating mp3 ID3 Tags
Maint: [EMAIL PROTECTED]
Index: audio
B-deps:
R-deps:
Port: mp3butler-1.0.2
Path: /usr/ports/audio/mp3butler
Info: A program for renaming mp3 files
Maint: [EMAIL
Subj is the question .. Where can I find a map of
how I build a Unix (esp F.BSD) CD Using Apple iBook
running OSX 10.2 CD-R / CD-RW burner.
All clues are welcome.
Or how to overcome us govt politics ...
/Everett/
=
Everett Batey - [EMAIL PROTECTED] Web http://www.vhwy.com
Page 805
Find where your httpd resides and try these commands:
/usr/local/sbin/httpd
/usr/local/sbin/httpd
/usr/local/sbin/httpd
- Original Message -
From: Toomas Aas [EMAIL PROTECTED]
To: Steve Warwick [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Wednesday, October 30, 2002 2:02 AM
Subject: Re:
Ev Batey WaSixCre wrote:
Subj is the question .. Where can I find a map of
how I build a Unix (esp F.BSD) CD Using Apple iBook
running OSX 10.2 CD-R / CD-RW burner.
All clues are welcome.
Or how to overcome us govt politics ...
/Everett/
man mkisofs to learn how to make a disk image and
sent accidently: here it is if you just type httpd, you should see some
options. these options can be helpful (in conjunction to checking the
error-log) in diagnosing an apache config.
/usr/local/sbin/httpd -S
/usr/local/sbin/httpd -t
/usr/local/sbin/httpd -v
/usr/local/sbin/httpd -V
hope
Sorry, Forgot to mention, I've done the swaping of PCI
cards, removing some, trying one by in deifferent
slots, etc. Unfortunatly, this box has a Setup
Utility and not a real BIOS, so there's limited
control. IRQ 5 only seems to take ppc0 (kernel
config, and turning the port off in the BIOS)
On October 29, 2002 05:11 pm, TooMany Mirrors wrote:
I have a few questions that I need some help with. I would like to set up
my cd burner with scsi emultion so I can use some of the X cd burning apps
to make music cds from OGGs/MP3s. I found the site
In the last episode (Oct 30), Matthias Trevarthan said:
I've got a Sony AIT autoloader, model TSL-SA300C. It's a four tape
changer.
In my dmesg.boot, it show the changer as a 'pass2' device, but not a
'ch' device.
So, I guess my two questions are:
How do I use this changer as a 'pass'
On 2002-10-28 23:35, adrian kok [EMAIL PROTECTED] wrote:
I don't understand about the interface lo0
If it is for loopback, why I got the following from
ipfw -a list
but I didn't ping 127.0.0.1
A network interface doesn't exist solely for the purpose of being able
to run ping on it. Other
Le 2002-10-30, Brad Laue écrivait :
Given the fact that the new cdrecord uses ATAPI commands instead of relying on
SCSI emulation, is there another practical reason ATAPICAM exists?
First, I do not know what 'new cdrecord' you are referring to. The
version from the ports tree does *not* use
hello-
i would like to use access bsd samba shares from my windows 2000 box from
work. currently i am tunneling port 139 through ssh. When i goto run
\\localhost\share i get an error: The network name cannot be found. if i
change the port to 9001 i can access the shares using smbclient. can
In the last episode (Oct 30), Michael Grant said:
Does it work, or can someone tell me what would happen if I connected
2 freebsd systems to the same scsi disk?
I have seen this done with Suns, so it's not such a bizare question
in the scheme of things. What they did was change the scsi
I have a custom kernel and I'm running Stable I am really just making sure
this is a resonable solution. However I have applied all patches and am
getting an error during the build process. This is all applicalbe info
4.7-STABLE FreeBSD 4.7-STABLE #0: Mon Oct 28 12:16:28 EST 2002
patch
On Wed, 30 Oct 2002, John Bleichert wrote:
Date: Wed, 30 Oct 2002 15:42:24 -0500 (EST)
On Wed, 30 Oct 2002, Ev Batey WaSixCre wrote:
Subject: Using iBook OS X 10.2 CD Writer to create a FBSD on Intel Boot
CDROM
Subj is the question .. Where can I find a map of
how I build a
Performed a fresh upgrade (actually, wipe and install) from 4.5 to 4.7
release. In X, any event (clicking, scrolling, etc.) causing static
lines that are very disconcerting and at times make it downright
unusable. I've read the documentation for my video card's driver and
tried several options,
WERKEN BIJ DE LOTTO,
41132, NL-1007 DB AMSTERDAM,
THE NETHERLANDS.
FROM: THE DESK OF THE DIRECTOR PROMOTIONS,
INTERNATIONAL PROMOTIONS/PRIZE AWARD DEPARTMENT,
REF: WBL/67-B773524441
ATTN:
AWARD NOTIFICATION; FINAL NOTICE
We are pleased to inform you of the announcement
On Wed, 30 Oct 2002 23:41:49 +0200
Giorgos Keramidas [EMAIL PROTECTED] wrote:
On 2002-10-29 19:26, Chris Pressey [EMAIL PROTECTED] wrote:
On Tue, 29 Oct 2002 14:28:39 +
Matthew Seaman [EMAIL PROTECTED] wrote:
I think what has happened is that one or more of the Makefiles in
the src
try checking for updated DNS from your ISP. I've had that problem
before..outdated dns.
Charles Pelletier
Tech. Coordinator
St Luke's School
- Original Message -
From: C KH [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Wednesday, October 30, 2002 11:54 AM
Subject:
I've had this problem a few times, and the solution for me was always to
not use such a high color depth level. I had been trying to use 24 bit,
but once I went down to 16 bit, it went away. I think this is depending
on the amount of RAM on your video card...give it a shot.
HTH,
Andy Knapp
On
Thanks for the tip. That helped tremendously, but it still has the problem.
I guess I'll be able to live with it until I can afford a new video card :)
-Joel
Andrew Knapp wrote:
I've had this problem a few times, and the solution for me was always to
not use such a high color depth level. I
On Tue, 29 Oct 2002, Jacob Rhoden wrote:
I was wondering if there are any people who use colour laser printers with
freebsd, what models work and print photos fairly well? (I dont want to
pay excessive amounts of money for a colour laser printer, especially if it
doesnt work with
# [EMAIL PROTECTED] / 2002-10-30 13:16:10 -0500:
I am attempting to create a simple user shell executable which will
execute a root command.
su root killall squid
requests root's password, and then issues a;
killall: /usr/bin/killall: cannot execute binary file
while killall executes
On October 28, 2002 09:05 am, Lowell Gilbert wrote:
chip wiegand [EMAIL PROTECTED] writes:
I am wondering if the linux app cdparanoia works on FBSD-4.7? It's
not in the ports, so I would have to download the source from their
web site.
It works fine, but only on SCSI devices.
There are
On Thu, 31 Oct 2002 04:04:19 + (GMT), =?iso-8859-1?q?shubha=20mr?=
[EMAIL PROTECTED] said:
Simply put,will untimeout cause to de-establish a
timeout irrespective of the position/status of a
timeout already scheduled?In other words,will
untimeout prove futile sometimes?
No and yes,
Hi,
I have sendmail / qpopper running on a production machine and have yet to
figure out a way to open mail up to my client sin a secure way.
Eg. Client logs in from aol.com to check and send mail.
Is there a way to do this that will not open my machine up to abuse?
TIA
Steve
To
From: Steve Warwick [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, October 30, 2002 10:19 PM
Subject: Sendmail: non-relay secure
Hi,
I have sendmail / qpopper running on a production machine and have
yet to
figure out a way to open mail up to my client sin a secure way.
Eg.
I have a ForteMedia FM801 soundcard, and the sound is really terrible.
Basically, any output sounds like it was 22kH or something.
Is it hardware or driver?
I can't test since all I have here is FreeBSD.
--
If you cc me or take the list(s) out completely I'll most likely ignore
your message.
Hey there, Just got an atapi HP Colorado 5gb Tape drive and it has
been giving me a hard time. For the most part I can backup data with
dump/tar/dd, and issue commands with mt but after every command or
program has completed its task it locks and the device turns to: mt:
/dev/ast0: Device
1 - 100 of 110 matches
Mail list logo
