(forgot to cc the list =))
Remove the word root from the crontab entry. The user should be
specified only in the system crontab.
On 10/3/06, jan gestre <[EMAIL PROTECTED]> wrote:
i made a script and put on root's crontab, however it's not doing or showing
the output that is forwarded to my email
When will carpdev option appear for CARP devices in FreeBSD ?
Thanks...
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Alex Zbyslaw wrote:
> Pete Slagle wrote:
>> Recent versions of ruby18 seem to take more than 145 MB of virtual
>> memory to build with portupgrade or "make install clean."
> Karol Kwiatkowski wrote less than a week ago:
>> # cd /usr/ports/lang/ruby18
>> # make -DNOPORTDOCS install
That put me on
On 03/10/2006 11:37, Pete Slagle wrote:
> Alex Zbyslaw wrote:
>> Pete Slagle wrote:
>>> Recent versions of ruby18 seem to take more than 145 MB of virtual
>>> memory to build with portupgrade or "make install clean."
>
>> Karol Kwiatkowski wrote less than a week ago:
>>> # cd /usr/ports/lang/ruby1
Anyone else seeing this problem today?
Name lookup failure for "cvsup.FreeBSD.org": Host name lookup failed
Will retry at 07:54:22
Other hosts resolve fine.
I did a search on the lists and didn't notice anything about host
changes, etc.
_F
___
Sorry for using up bandwidth.
I cannot connect to my ISP with FreeBSD (6.0). The ISP is not using
PAP/CHAP in my case, but apparently something very old. Using minicom
I can see that
1. my modem is connected to /dev/cuad0
2. after i dailled the ISP, they put me through a login. password and
a
I have a bandwidth manager running on FreeBSD 4.9 LOCAL. I want to install
net-snmp so that traffic generated on the bwmger can be pointed to cacti (like
mrtg). My problem is that I have gone through enough manuals to get assistance
on which commands I should run to install the ports hierarchy.
On Oct 3, 2006, at 5:51 AM, Mbuthia Wangui wrote:
I have a bandwidth manager running on FreeBSD 4.9 LOCAL. I want to
install net-snmp so that traffic generated on the bwmger can be
pointed to cacti (like mrtg). My problem is that I have gone
through enough manuals to get assistance on which
In response to "Mbuthia Wangui" <[EMAIL PROTECTED]>:
> I have a bandwidth manager running on FreeBSD 4.9 LOCAL. I want to
> install net-snmp so that traffic generated on the bwmger can be pointed
> to cacti (like mrtg). My problem is that I have gone through enough
> manuals to get assistance on w
Forrest Aldrich wrote:
> Anyone else seeing this problem today?
>
>Name lookup failure for "cvsup.FreeBSD.org": Host name lookup failed
>Will retry at 07:54:22
>
>
> Other hosts resolve fine.
>
> I did a search on the lists and didn't notice anything about host
> changes, etc.
One
On Tuesday 03 October 2006 14:55, KHOO Guan_Chen wrote:
> Sorry for using up bandwidth.
>
> I cannot connect to my ISP with FreeBSD (6.0). The ISP is not using
> PAP/CHAP in my case, but apparently something very old. Using minicom
> I can see that
> 1. my modem is connected to /dev/cuad0
> 2. afte
On Tue, 2006-10-03 at 15:12 +1000, Norberto Meijome wrote:
ssh some.hosts.address "ps aux | grep httpd | grep -v grep"
"ps aux | grep [h]ttpd"
ssh [EMAIL PROTECTED] "pgrep httpd"
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.or
On Wed, 20 Sep 2006 02:20 pm, jekillen wrote:
> Hello again;
> I have a question about how mail from the system is generated
> for root. This question was prompted when I edited the Postfix
> aliases file and ran newaliases, then did postfix reload,
> assuming the mail system was running. I was inf
This are my rules (line 631 is about the same port!):
Ciao - Vittorio
#ipfw list
00500 check-state
00501 deny tcp from any to any established
00502 deny ip from any to any frag
00503 allow ip from any to any via
lo0
00505 deny ip from any to 127.0.0.0/8
00508 deny ip from 127.0.0.0
/8 to any
005
On 2006/10/03 3:55, KHOO Guan_Chen seems to have typed:
> Local>
> I have tried to enter things like "ppp", "~ppp" "cppp" ">ppp" after
> the (Local>) in my chat_script
> but no go. In minicom, I see that they sometimes drop me into a
> shell to which I can only exit,
Somewhere over a decade a
Quoting Michael Christensen <[EMAIL PROTECTED]>:
Hi,
I really hope that you're answering questions about installing
FreeBSD, since I can't yet start threads on freebsdforum.org.
My question is :
I have downloaded the entire FreeBSD 6.1 (about 17,5 GB) and made
a FREEBSD directory
On Oct 2, 2006, at 4:44 PM, Marwan Sultan wrote:
Do you recommend any good switch product and model number which has
port enable.disable
feature ? other than cisco, in a good price?
You're looking for "managed" switches; the HP Procurve lineup, and
the 3com SuperStack III models are also pr
I have some Freebsd systems that are running as VMware guests. I'd like
to configure their kernels so as to minimize the overhead on the VMware
host system. After reading and partially digesting the white paper on
timekeeping in VMware virtual machines
(http://www.vmware.com/pdf/vmware_timeke
I modified my local freebsd.mc file to add support for spamhaus. After
I compilied the sendmail.cf file, sendmail won't start. What am I
doing wrong here?
[EMAIL PROTECTED] mail]# m4 freebsd.mc > sendmail.cf
[EMAIL PROTECTED] mail]# /etc/rc.d/sendmail start
554 5.0.0 /etc/mail/sendmail.cf: line 2
I modified my local freebsd.mc file to add support for spamhaus. After
I compilied the sendmail.cf file, sendmail won't start. What am I
doing wrong here?
You have this:
FEATURE(dnsbl, 'sbl.spamhaus.org', 'Rejected - see http://www.spamhaus.org')
You want this:
FEATURE(dnsbl, `sbl.spamhaus.or
Andy Greenwood wrote:
I compilied the sendmail.cf file, sendmail won't start. What am I
doing wrong here?
554 5.0.0 /etc/mail/sendmail.cf: line 2: invalid argument to V line:
"ERSIONID(FreeBSD: s"
451 4.0.0 /etc/mail/sendmail.cf: line 6: fileclass: cannot open
'ATURE(access_db,': No such file or
You may want to try using portsnap.
pkg_add -r portsnap
then
portsnap fetch extract
BTW: This sounds like one of the etnic (sp?) bandwidth manager boxes.
Would that happen to be the case?
___
freebsd-questions@freebsd.org mailing list
http://li
I've been using portsnap on 6.x systems for some time now with no
problems. I decided to move /usr/ports and /usr/src to their own
filesystem, /build, to make it easier to backup the important system
stuff. I also relocated /var/db/portsnap to /build/db/portsnap.
I thought I could edit /etc/
Well I am using FreeBSD 6.0 on Dell Power Edge 2850 running qmail, I am
using LogiTech RAID Controller.
I compile the kernel with normal IPFIREWALL, IPFIREWALL_FORWARD. I got some
power with my power, every night my UPS batteries get discharged and my
system shutdown hard. its about 4 to 6 times
On Oct 3, 2006, at 12:46 PM, DeadMan Xia wrote:
I compile the kernel with normal IPFIREWALL, IPFIREWALL_FORWARD. I
got some
power with my power, every night my UPS batteries get discharged
and my
system shutdown hard. its about 4 to 6 times my system get Hard
Shut in 2
days. although i
On Tuesday 03 October 2006 12:58, Jeff Dickens wrote:
> I have some Freebsd systems that are running as VMware guests. I'd like
> to configure their kernels so as to minimize the overhead on the VMware
> host system. After reading and partially digesting the white paper on
> timekeeping in VMware
On 03.10.06 07:53 , Forrest Aldrich wrote:
> Anyone else seeing this problem today?
>
>Name lookup failure for "cvsup.FreeBSD.org": Host name lookup failed
>Will retry at 07:54:22
>
>
> Other hosts resolve fine.
>
> I did a search on the lists and didn't notice anything about host chang
I have installed FreeBSD 4.1. The in-built perl is installed on that but I
have to install perl5.8.5. I have googled it and found answers to install
perl, but I am not sure what I am doing wrong. I can't install it. I am
wrting you the steps which I did:
1. Copied perl-5.8.5.tar.gz
2. Extracted th
I have a drive that gained a bad sector, detected by smartctl. I have
the LBA number of the sector. The drive is one large UFS partition.
Is it possible to determine where in the filesystem the sector lies?
Mostly, what file is corrupted by the bad sector?
Thanks,
Mike
_
Hi people i have read a some mails about this problem, it looks like all
was running some 5.X branch, i have been using FreeBSD 6.1 some months
ago, yesterday i make the buildworld process, right now i have my box with
FreeBSD6.1-p10.
This box runs bacula server with this NIC:
vr0: port 0xe4
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Bawan Karn
> Sent: dinsdag 3 oktober 2006 22:36
> To: freebsd-questions@freebsd.org
> Subject: installing perl5.8.5
>
>
>
> I have installed FreeBSD 4.1.
I hope you mean 4.11; I really do. :) Other
Gurus
Thank you all for your advices, I would go ahead and look for "managed"
switches :)
Belkin was a mistake,
Thank you again
Marwan
> >Get real switching hardware to replace those Belkins. Cisco and other
> >switches will allow you to enable/disable ports on demand.
>
> Do you recommen
Hello,
Is there a particular reason ZendOptimizer
(/usr/ports/devel/ZendOptimizer) for PHP 4.4.4 requires FreeBSD 5.x or
higher? Near as I can tell, only reason it wouldn't run really, is because
of the absence of libm.so.3. But I resolved to be bold, and made a symlink
for libm.so.3 to libm.so.2
I wrote:
> Subject: ZendOptimizer and libm.so.2?
>
>
> Hello,
>
> Is there a particular reason ZendOptimizer
> (/usr/ports/devel/ZendOptimizer) for PHP 4.4.4 requires FreeBSD 5.x or
> higher? Near as I can tell, only reason it wouldn't run
> really, is because of the absence of libm.so.3. But I
In the last episode (Oct 03), Mark said:
> > Is there a particular reason ZendOptimizer
> > (/usr/ports/devel/ZendOptimizer) for PHP 4.4.4 requires FreeBSD 5.x
> > or higher? Near as I can tell, only reason it wouldn't run really,
> > is because of the absence of libm.so.3. But I resolved to be bol
> -Original Message-
> From: Dan Nelson [mailto:[EMAIL PROTECTED]
> Sent: woensdag 4 oktober 2006 0:19
> To: Mark
> Cc: 'FreeBSD-Questions Questions'
> Subject: Re: ZendOptimizer and libm.so.2?
>
>
> > Which leads me to believe I'm correct in thinking Zend
> > Optimizer really just nee
Hello Mark,
Wednesday, October 4, 2006, 12:22:28 AM, you wrote:
>> > Which leads me to believe I'm correct in thinking Zend
>> > Optimizer really just needs libm.so.2, right?
>>
>> You're better off installing the misc/compat4x port to get libm.so.2 .
> No, I *have* libm.so.2 (FreeBSD 4.11); T
> -Original Message-
> From: Daniel Gerzo [mailto:[EMAIL PROTECTED]
> Sent: woensdag 4 oktober 2006 0:27
> To: Mark
> Cc: 'Dan Nelson'; 'FreeBSD-Questions Questions'
> Subject: Re[2]: ZendOptimizer and libm.so.2?
>
>
>
> Hello Mark,
>
> Wednesday, October 4, 2006, 12:22:28 AM, you wrote:
>
I'm having a hard time getting cron to run a task. I've run crontab -e
(as root), and added the following line:
12 * * * * /usr/local/bin/mirror_ubuntu
This script runs from teh command line. Now I've seen plenty of
strange beahviour because of the limited environment cron tasks
get, but a basic
On 10/3/06, Ivan Levchenko <[EMAIL PROTECTED]> wrote:
Remove the word root from the crontab entry. The user should be
specified only in the system crontab.
thanks ivan, but the solution i made was i put in the
/usr/local/etc/periodic/daily directory, it is now working :D
On 10/3/06, jan ge
Aloha,
Using help from this list and Greg Lehey's book I have built a FreeBSD
6.2 server for a mail server and Installed Postfix from ports and tested
it OK.
I can see mail on the server in the expected box by telnet. I installed
pop3 to capture the mail on another FreeBSD 4.11 box on anoth
hi guys,
i tried upgrading the amavisd-new port via portmanager and portupgrade, both
methods failed, i had a similar problem before but i forgot how did i fix it
:( is there a problem with the amavisd-new port?
TIA
___
freebsd-questions@freebsd.org
On 10/3/06, perikillo <[EMAIL PROTECTED]> wrote:
Hi people i have read a some mails about this problem, it looks like all
was running some 5.X branch, i have been using FreeBSD 6.1 some months
ago, yesterday i make the buildworld process, right now i have my box with
FreeBSD6.1-p10.
This b
Hi,
Running on 5.5 pre release. [Need to upgrade the machien, i know]
Just cvsup'd my ports and I'm adding curl for php5-extensions.
When it gets to the xorg-libraries I get this
snip
===> xorg-libraries-6.9.0 depends on shared library: drm - found
===> xorg-libraries-6.9.0 depends
On Sun, Aug 27, 2006 at 01:04:54PM +0500, ?? ?? wrote:
> I'm a junior in FreeBSD, and I faced with problem.
You should know that others have mailers that are thread enabled. This
means that when you compose a new mail, but you that the reply sort cut
others may not read this, b
On 10/4/06, Pete C <[EMAIL PROTECTED]> wrote:
Quoting Michael Christensen <[EMAIL PROTECTED]>:
> Hi,
>
> I really hope that you're answering questions about installing
> FreeBSD, since I can't yet start threads on freebsdforum.org.
>
> My question is :
> I have downloaded the entire Free
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
jan gestre wrote:
> On 10/4/06, Pete C <[EMAIL PROTECTED]> wrote:
>>
>>
>> Quoting Michael Christensen <[EMAIL PROTECTED]>:
>>
>> > Hi,
>> >
>> > I really hope that you're answering questions about installing
>> > FreeBSD, since I can't yet start thr
I'm having a hard time getting cron to run a task. I've run crontab -e
(as root), and added the following line:
12 * * * * /usr/local/bin/mirror_ubuntu
This script runs from teh command line. Now I've seen plenty of
strange beahviour because of the limited environment cron tasks
get, but a basic
On 10/3/06, stan <[EMAIL PROTECTED]> wrote:
I'm having a hard time getting cron to run a task. I've run crontab -e
(as root), and added the following line:
12 * * * * /usr/local/bin/mirror_ubuntu
This script runs from teh command line. Now I've seen plenty of
strange beahviour because of the li
Hi Jeff,
Thanks for the suggestion and yes the bandwidth manager is an etinc
(ETR1800) box.
Let me see how the portsnap goes.
- Original Message -
From: "Jeff Palmer" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Cc:
Sent: Tuesday, October 03, 2006 9:08 PM
Subject: Re: installing ports
Hi all,
With Philip's encouragement and some extra work thrown in, I've made the
following conclusion:
1. If I install Apache 2 + MP2 + libapreq2 using the existing port tree
in FBSD6.1, it's fine.
2. If I install FBSD6.1 + cvsup-without-gui + updated port tree +
Apache2 + MP2 + libapreq2, it
51 matches
Mail list logo