On 11/27/12 22:25, Aleksandr Miroslav wrote:
Finally got sick of seeing tons of ssh break-in attempts in my logs. Am
considering using denyhosts, or fail2ban. Anyone have any experience
with these?
I'm already using the AllowUsers facility of ssh to only allow specific
users in, so I'm not
hello guys,
i want to connect my freebsd system to modem and configure it via my
freebsd. i thought that i should change /etc/ttys file to set speed and
other configuration. in order to check if i am right or not, i comment ttyu
line in ttys file and expect the modem got disconnected but the
jb jb.1234abcd at gmail.com writes:
...
I tested and compared results on FreeBSD 9.0 and FreeBSD 9.1-RC3 (done here
earlier) and this is a summary.
Please review it, in particular the conclusions, as they are intended to be
the base for filing a PR#.
Test on FreeBSD 9.0
---
$
El día Wednesday, November 28, 2012 a las 01:44:18PM +0330, s m escribió:
hello guys,
i want to connect my freebsd system to modem and configure it via my
freebsd. i thought that i should change /etc/ttys file to set speed and
other configuration. in order to check if i am right or not, i
i want to connect my freebsd system to modem and configure it via my
freebsd. i thought that i should change /etc/ttys file to set speed and
other configuration. in order to check if i am right or not, i comment ttyu
line in ttys file and expect the modem got disconnected but the modem still
Hi,
I'm fan of csup, I've been using it for years, since 7.0-RELEASE, however
it will be disabled on February 2013..
I don't care about using portsnap instead, but how to fetch src/ then ?
I will need to use portsnap, to fetch ports build subversion and then I can
fetch the src, fetch the ports
On 11/28/12 12:24, David Demelier wrote:
Hi,
I'm fan of csup, I've been using it for years, since 7.0-RELEASE, however
it will be disabled on February 2013..
I don't care about using portsnap instead, but how to fetch src/ then ?
I will need to use portsnap, to fetch ports build subversion
Si no visualiza correctamente este E-Mail haga
Click Aquí
(Link-http://v2.envialosimple.com/campaign/htmlversion?AdministratorID=12453CampaignID=43StatisticID=20MemberID=51387s=50b07966dcd452cd3268364dc609ed5fisDemo=0)
Normal 0 21 false false false ES-AR X-NONE X-NONE
Si no visualiza correctamente este E-Mail haga
Click Aquí
(Link-http://v2.envialosimple.com/campaign/htmlversion?AdministratorID=12453CampaignID=43StatisticID=20MemberID=51387s=50b07966dcd452cd3268364dc609ed5fisDemo=0)
Normal 0 21 false false false ES-AR X-NONE X-NONE
On Nov 27, 2012 5:20 PM, Robert Bonomi bon...@mail.r-bonomi.com wrote:
Date: Tue, 27 Nov 2012 15:10:50 -0800
From: Gary Kline kl...@thought.org
Subject: just thought of a new gui port!
2. I live so close to the airport weather station that im sure
that would tell me
==
we send special offers
Unsubscribe freebsd-questions@freebsd.org from this list:
http://blogspot.us6.list-manage.com/unsubscribe?u=37964f600b3d95d5cb34024a4id=1bd9b49122e=0c68642962c=1f7c6f988b
Our mailing address is:
the Merchant Solutions
alfalh
==
we send special offers
Unsubscribe questi...@freebsd.org from this list:
http://blogspot.us6.list-manage.com/unsubscribe?u=37964f600b3d95d5cb34024a4id=1bd9b49122e=503302b349c=1f7c6f988b
Our mailing address is:
the Merchant Solutions
alfalh
town
On Wed, 28 Nov 2012, Waitman Gobble wrote:
It looks like Oregon Scientific has some cool weather station models with
USB connectivity, might work well with a FreeBSD system...
wunderground is definitely a great site however at least in my location the
temperature can be off as much as ten
On Wed, 28 Nov 2012 13:44:18 +0330, s m wrote:
hello guys,
i want to connect my freebsd system to modem and configure it via my
freebsd.
For doing _what_ exactly? I ask because depending on your
goal there might be different approaches neccessary:
a) dial out to connect to the Internet
b)
On Wed, 2012-11-28 at 08:06 +0100, Ralf Mardorf wrote:
On Tue, 2012-11-27 at 17:04 -0700, Warren Block wrote:
# gpart create -s bsd ada0s1
gpart: geom 'ada0s1': File exists
Sorry, no idea on that. Because of the extended partitions, maybe.
Thank you,
so this should work and if
On Wed, 28 Nov 2012, Ralf Mardorf wrote:
On Tue, 2012-11-27 at 17:04 -0700, Warren Block wrote:
# gpart create -s bsd ada0s1
gpart: geom 'ada0s1': File exists
Sorry, no idea on that. Because of the extended partitions, maybe.
Thank you,
so this should work and if it doesn't work, I can't
On Wed, 28 Nov 2012, Ralf Mardorf wrote:
On Wed, 2012-11-28 at 08:06 +0100, Ralf Mardorf wrote:
On Tue, 2012-11-27 at 17:04 -0700, Warren Block wrote:
# gpart create -s bsd ada0s1
gpart: geom 'ada0s1': File exists
Sorry, no idea on that. Because of the extended partitions, maybe.
Thank
wunderground is definitely a great site however at least in my location the
temperature can be off as much as ten degrees, its almost like they are
reading from a station on top of the mountain, and I.m in the valley. Its
an issue of being on the coast I suppose, for example it could be 80
On Wed, 2012-11-28 at 09:25 -0700, Warren Block wrote:
On Wed, 28 Nov 2012, Ralf Mardorf wrote:
On Wed, 2012-11-28 at 08:06 +0100, Ralf Mardorf wrote:
On Tue, 2012-11-27 at 17:04 -0700, Warren Block wrote:
# gpart create -s bsd ada0s1
gpart: geom 'ada0s1': File exists
Sorry, no idea
Matthew Seaman wrote:
On 23/11/2012 19:19, Fbsd8 wrote:
Where do I find the url for the beta-test server repositories?
Can I use ftp or browser to see index content?
pkg.conf as supplied in the port-mgmt/pkg port comes with the right URL
for the FreeBSD pkg repo[*], which is currently
About to build a replacement system for an older i386 setup. A few
years ago I had tried the amd64 port on it and found it was frustrating
as things that just worked on i386 did not on amd64. IIRC ports were
large annoyance too.
Now I have a new system with 8GB, etc,etc and wonder if I am best
On Nov 28, 2012, at 6:36 PM, mike miskulin birdf...@yahoo.com wrote:
About to build a replacement system for an older i386 setup. A few
years ago I had tried the amd64 port on it and found it was frustrating
as things that just worked on i386 did not on amd64. IIRC ports were
large
On Wed, 28 Nov 2012, mike miskulin wrote:
About to build a replacement system for an older i386 setup. A few
years ago I had tried the amd64 port on it and found it was frustrating
as things that just worked on i386 did not on amd64. IIRC ports were
large annoyance too.
Now I have a new
What port was that ?
I've never had a *single* problem due to using amd64 over i386.
Well I have to apologize, I've reached senility! My past bad experience
was with netbsd amd64 afterwhich I bailed and went to FreeBSD i386
(thanks google).
But I guess the basic question remains - are
Matthew Seaman wrote:
On 27/11/2012 15:49, C. L. Martinez wrote:
Is this server down??
Yes. Is being reinstalled.
Cheers,
Matthew
___
freebsd-questions@freebsd.org mailing list
On Wed, 28 Nov 2012 12:53:26 -0500, mike miskulin wrote:
But I guess the basic question remains - are there any considerations in
regards ports, linux emulation, etc that would sway me to remain i386?
The only problem might be if you want to use wine. As it has
been said, there are binary
On 11/28/12 18:49, Warren Block wrote:
On Wed, 28 Nov 2012, mike miskulin wrote:
About to build a replacement system for an older i386 setup. A few
years ago I had tried the amd64 port on it and found it was frustrating
as things that just worked on i386 did not on amd64. IIRC ports were
On Wed, 28 Nov 2012 19:25:59 +0100
Polytropon free...@edvax.de wrote:
On Wed, 28 Nov 2012 12:53:26 -0500, mike miskulin wrote:
But I guess the basic question remains - are there any
considerations in regards ports, linux emulation, etc that would
sway me to remain i386?
The only problem
Date: Wed, 28 Nov 2012 07:26:25 -0800
Subject: Re: just thought of a new gui port!
From: Waitman Gobble gobble...@gmail.com
On Nov 27, 2012 5:20 PM, Robert Bonomi bon...@mail.r-bonomi.com wrote:
Date: Tue, 27 Nov 2012 15:10:50 -0800
From: Gary Kline kl...@thought.org
Subject:
On Wed, Nov 28, 2012 at 1:01 PM, Robert Bonomi bon...@mail.r-bonomi.com wrote:
Date: Wed, 28 Nov 2012 07:26:25 -0800
Subject: Re: just thought of a new gui port!
From: Waitman Gobble gobble...@gmail.com
On Nov 27, 2012 5:20 PM, Robert Bonomi bon...@mail.r-bonomi.com wrote:
Date: Tue,
On 27 November 2012 22:01, Leslie Jensen les...@eskk.nu wrote:
Volodymyr Kostyrko skrev 2012-11-26 21:50:
26.11.2012 20:40, Leslie Jensen:
Rules from pf.conf
# macros
ext_if=xl0
int_if=bge0
tcp_services={ 22, 993, 5910:5917 }
In message alpine.bsf.2.00.1211272215360.62...@wonkity.com,
Warren Block wbl...@wonkity.com wrote:
I tried to do as you suggest and change the partition type to freebsd-ufs,
but there's a problem...
# gpart modify -i 1 -t freebsd-ufs /dev/da1
gpart: Invalid argument
da1 is the drive.
On Wed, 28 Nov 2012, Ronald F. Guilmette wrote:
In message alpine.bsf.2.00.1211272215360.62...@wonkity.com,
Warren Block wbl...@wonkity.com wrote:
I tried to do as you suggest and change the partition type to freebsd-ufs,
but there's a problem...
# gpart modify -i 1 -t freebsd-ufs /dev/da1
In message alpine.bsf.2.00.1211281735290.69...@wonkity.com,
Warren Block wbl...@wonkity.com wrote:
On Wed, 28 Nov 2012, Ronald F. Guilmette wrote:
In message alpine.bsf.2.00.1211272215360.62...@wonkity.com,
Warren Block wbl...@wonkity.com wrote:
I tried to do as you suggest and change the
Installing PC-BSD 8.2 x64 did work without issues. I unchecked the
bootloader install. Linux grub legacy until now is unable to boot BSD,
because of Error17: Cannot mount selected partition
spinymouse@q:~$ cat /boot/grub/menu.lst
timeout 8
default 0
color light-blue/black light-cyan/blue
PS:
spinymouse@q:/boot$ grep CONFIG_UFS_FS config-3.6.5-rt14
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
spinymouse@q:/boot$ lsmod | grep ufs
spinymouse@q:/boot$ sudo modprobe ufs
[sudo] password for spinymouse:
spinymouse@q:/boot$ lsmod | grep ufs
ufs74797 0
So for
Hi.
How to allow httpd to run this command 'ipfw table 7 add ... '?
--
Eugen mailto:kes-...@yandex.ru
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
On Nov 28, 2012, at 7:48 PM, Eugen Konkov wrote:
Hi.
How to allow httpd to run this command 'ipfw table 7 add ... '?
imho the most secure way is to add an entry to sudoers(5) (you can use
visudo(8) to edit sudoers(5)) allowing the apache privilege-separation user
(www? we use apache
On Thu, 29 Nov 2012, Ralf Mardorf wrote:
PS:
spinymouse@q:/boot$ grep CONFIG_UFS_FS config-3.6.5-rt14
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
spinymouse@q:/boot$ lsmod | grep ufs
spinymouse@q:/boot$ sudo modprobe ufs
[sudo] password for spinymouse:
spinymouse@q:/boot$ lsmod | grep ufs
Ralf Mardorf ralf.mard...@rocketmail.com writes:
Installing PC-BSD 8.2 x64 did work without issues. I unchecked the
bootloader install. Linux grub legacy until now is unable to boot BSD,
because of Error17: Cannot mount selected partition
spinymouse@q:~$ cat /boot/grub/menu.lst
timeout 8
Hi,
A girl sent me her CD and it appears that she created a mixed mode
disc with CD-TEXT info of her lyrics. I can't recall playing/noticing
such a disc in the past 10 years so I'm at a loss.
I can dump the audio tracks (cdda2wav) and/or play the audio disc with mplayer.
Anyone with a pointer
Bubu
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
thanks guys for your replies,
now i understand two types of connections are available by modem, dial-in
and dial-out.
honestly, i should do it for my boss and don't know what he should want
exactly to do but i am sure that he has an external serial modem and wants
to config it by AT commands via
43 matches
Mail list logo
