Hi all,
I have two cisco switches, configured to put ports 2-6 on each of
them into vlan 100. Then I have port 1 on both set to trunk between the two
switches. If I have a device on port 2 on switch1 it can ping a device on
port 2 on switch2.
If I break the link between the two switches,
---
From: Peter Wood [mailto:[EMAIL PROTECTED]
Sent: 11 January 2006 08:29 PM
To: Dave Raven
Cc: freebsd-questions@freebsd.org
Subject: Re: Bridging a Cisco Trunk
Dave,
> I have two cisco switches, configured to put ports 2-6 on each of
> them into vlan 100. Then I have port 1 on both set t
Hi all,
I really need some urgent help with this I'm completely confused. I
have a FreeBSD 4.9 machine running ipfilter ipnat vrrp and a few other
services, today is the first time I tried to access through the specific
method but now every interface and every local address I try has the s
estions on further tests?
Thanks again
Dave
-Original Message-
From: Gordon Freeman [mailto:[EMAIL PROTECTED]
Sent: 24 June 2004 11:09 PM
To: Dave Raven
Subject: Re: Urgent 4.9 networking problems
try ping -nR -c1 x.y.186.254
If you don't get the same "lag" then it is your D
riginal Message-
From: JJB [mailto:[EMAIL PROTECTED]
Sent: 24 June 2004 11:23 PM
To: Dave Raven; [EMAIL PROTECTED]
Subject: RE: Urgent 4.9 networking problems
Your symptoms are typical of DNS time outs.
Ping ip address does no DNS lookups.
Ping freebsd.org will not work either.
With out a l
re the problem is
Thanks
Dave
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kevin Stevens
Sent: 24 June 2004 11:32 PM
To: Dave Raven
Cc: [EMAIL PROTECTED]
Subject: Re: Urgent 4.9 networking problems
On Thu, 24 Jun 2004, Dave Raven wrote:
> # ifco
out why it has to wait to resolve the host name when I'm telnetting
directly to an ip address and I have no nameservers specified? Surely that
can't be the way it has to be...
Thanks again
Dave
-Original Message-
From: JJB [mailto:[EMAIL PROTECTED]
Sent: 24 June 2004 11:45
Hi all,
I'm having a problem where I need to allow a proccess to use up to
1.5gig of memory, however its going to be a problem to recompile my kernel.
I know that these options would solve the problem:
options MAXDSIZ = "(1536 * 1024 * 1024)"
options DFLDSIZ = "(1536 * 1024
Hi all,
Installed 5.2.1 on a high load server - albeit not recommended - and
it was working perfectly with SMP support. It picked up 4 cpu's and
appeared to be using them all. (The box is a dual 2.4gig Xeon machine).
Anyway, the box was as I said under quite a bit of load, and would die
abou
w its been running for
4 days, before it wouldn't run for 12 hours
Thanks
Dave
-Original Message-
From: Albert Shih [mailto:[EMAIL PROTECTED]
Sent: 04 June 2004 01:47 PM
To: Dave Raven
Cc: [EMAIL PROTECTED]
Subject: Re: 5.2.1 SMP problems
Le 04/06/2004 à 11:47:14+0200, Dave Raven a
Hi all,
I've done some research on bridging vlans and can't get it right
with FreeBSD bridge. What I want to do is bridge an undefined number of
vlans through a BSD machine. For example. Vlan 10 from em0 out em1.
Now I can't create each vlan and bridge those, because you can't have a
vlan
Hello all,
This seems to be a fairly simple questions, but has
been bothering me for a while now.
I want to specify whole IP classes instead of single ips
in my hosts.allow config file.
These are the methods I have tried (unsuccessfully):
sshd : 192.168.0.0/255.255.25
Hello all,
This seems to be a fairly simple questions, but has
been bothering me for a while now.
I want to specify whole IP classes instead of single ips
in my hosts.allow config file.
These are the methods I have tried (unsuccessfully):
sshd : 192.168.0.0/255.255.25
Hi all,
I have a FreeBSD box running a squid cache,
FreeBSD 4.7-RELEASE-p9 i386, squid built
from latest ports. (2.5-STABLE1). I'm not absolutely
sure, but it appears that whenever I am running squid,
the mbuf clusters on the bsd box rise at a steady rate,
before reach
t;[EMAIL PROTECTED]>
To: "'Dave Raven'" <[EMAIL PROTECTED]>
Sent: Wednesday, March 26, 2003 7:51 PM
Subject: RE: mbuf clusters
: grep mbuf /usr/src/sys/i386/conf/LINT
:
: :)
:
: -Original Message-
: From: [EMAIL PROTECTED]
: [mailto:[EMAIL PROTECTED] On Behalf
Hi all,
Firstly I am using FreeBSD 4, I know it's not supported but
hopefully someone has some experience with large disks on 4. I have a box
with 6x 500gig drives, configured in raid 5 which comes out around 2.3
terabytes of space. With that, the system picks up the drive (da0) as 0MB in
s
Hi all,
I have a FreeBSD 4.11 (I know its outdated but I don't have an
option) box which is behaving very weirdly. After about a day and a half it
starts to drop packets - about 6-10% of pings at least, and tcp traffic
becomes unreliable etc.
I have swapped out the network cards, the cab
Mounting root from ufs:/dev/ad0s1a
Thanks for the help
Dave
-Original Message-----
From: Simon Chang [mailto:[EMAIL PROTECTED]
Sent: Sunday, February 24, 2008 5:57 PM
To: Dave Raven
Cc: freebsd-questions@freebsd.org
Subject: Re: Dropped Packets
Hardware issues come to mind. Do you ha
r the help
Dave
-Original Message-
From: Dave Raven [mailto:[EMAIL PROTECTED]
Sent: Sunday, February 24, 2008 6:25 PM
To: 'Simon Chang'
Cc: 'freebsd-questions@freebsd.org'
Subject: RE: Dropped Packets
Hi,
Its interesting you'd say that I'd virtually rule
Hi all,
Is there anyway that I can list the proccesses
using mbufs / mbuf clusters. I need to see which
actual programs they are assigned to, not just
what the usage is.
Thanks
Dave
___
[EMAIL PROTECTED] mailing list
http://lists.fr
Hi all,
I'm currently looking into a problem with a Cisco 3640 router and a
FreeBSD 4.9 unit, connected via a crossover cable, that are not negotiating
correctly.
If you force the media setting to full or half duplex it has constant
collisions on the interface, and if you let both autoneg
Hi all,
I have a FreeBSD 4.x box running an app that uses 30-50% of the
processor. Periodically (through cron) we run a perl app that processes log
files and inserts the entries to sql.
This perl + mysql combination is causing problems for our app and I'd like
to run them at a low priority
22 matches
Mail list logo