I have a
[EMAIL PROTECTED]:3:0: class=0x040100 card=0x80271102 chip=0x00021102 rev=0x08
hdr=0x00
vendor = 'Creative Labs'
device = 'EMU10K1 Audio Chipset (SB Live!)'
class= multimedia
subclass = audio
-
sound card which works perfectly but
Hi.
The company I worked for is going to buy some wireless PCI and PCMCIA cards.
I have insisted on buying Prism II, Prism 2.5 or Prism 3 chipset based cards
since I can use them as an Access Point.
As far as I have searched on internet Prism 2,2.5,3 chipset based cards
support only 40 bit
Hi.
I have a firewall with both ipf and ipfw. I am using ipfw for bandwidth
limiting. But I am living a problem. Not all new connections that is matched
to pipe config aren't injected to pipe thus not bandwith limited. I have a
very simple config of ipfw as follows:
I have mailed that mail to freebsd-tokenring before but there seems to be no
action in that mailing list. So I am posting it to here too. Sorry for
inconvenience.
Hi I have to setup a machine using that pci tokenring adapter. I have
successfully
Hi.
I have installed FreeBSD on a double Xeon 2.4 GHZ with HTT feature.
Install and bootup went seamlessly but after enabling and compiling SMP
support I have started to receive that error:
ahc: Timedout SCB already complete. Interrupts may not be functioning
this happened with both
I am using 4.8-RC which I have cvsuped today for the problem that I have
mentioned before this mail.
REGARD
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
My problem was omission of the kernel option HTT which enables HTT support
in kernel. That support was committed to FreeBSD cvs at March 25 2003 which
is something new. But interesting thing is that even if I close Hyper
Threading support on my bios the system doesnt' boot...
I am using
I have an old tape
ast0: TAPE HP COLORADO 5GB at ata0-slave PIO4
But I am having that problem when I try to make backup of my system. It
seems a problem with ata0?
ast0: WEOF command timeout - resetting
ata0: resetting devices ..
acd0: removed from configuration
ast0: removed from
Hi.
I have an old system that has hpt366 card on it. I have connected 4 drive
connected to it. But after connecting those drives to that hpt366 I can not
do disklabel on them but i can if i connect it to normal ide connectors.
I am using GENERIC 4.8 kernel that ships with 4.8Release. The
First I am sorry if here is not the right place to ask it. I am trying to
update a port but I am having a problem. I am in fact having problems while
patch'ing my old port. Here is what I have done.
#cp -r category/ports category/ports.old
#cd category/ports
making changes
#cd
First I am sorry if here is not the right place to ask it. I am trying to
update a port but I am having a problem. I am in fact having problems while
patch'ing my old port. Here is what I have done.
#cp -r category/ports category/ports.old
#cd category/ports
making changes
#cd
I have lived that sio buffer overflow problem with my old 33.6 ISA modem.
What I did was to detach the isa card cleaned the dust on it and I haven't
seen such an error on my system :) funny but true..
Stephan Weber writes:
Hello,
I have a question about the driver for the
Hi;
How can I enable ALT-b or ALT-f keys in cons25 terminal? Or do I have to use
another terminal .
REGARDS.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Has anyone here achived to work canon a40 digital camera with FreeBSD?
I have followed these steps but it didn't work:
1) Edited usbd.conf
device PowerShot A40, Canon Inc.
product 0x3058
vendor 0x4a9
attach /usr/local/bin/gphoto2 --auto-detect
2)kldload usb.ko
3)usbd
.
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public key: http://www.enderunix.org/ofsen/ofsen.asc
First Turkish FreeBSD book is out! Go check it.
Duydunuz mu
thinking that the HBA card is the problem but don't have a chance
to try another HBA.
I have also used ISP_TARGET_MODE=1 in my kernel (both 5.3R and 5-STABLE).
But that totally disabled isp card.
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
Hi,
Is it possible to disable messages that was given by rc_ng to the console?
Maybe by disabling console entry in ttys file ?
Best Regars..
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public key: http
will
port mirror the traffic of my gateway to that machine. Something like sarg
(for squid) maybe.
Is there something like that you can advise me? I really need that. I was
using ipaudit but it just gives me Layer 4 and Layer 3 traffic.
---
Omer Faruk Sen
http
Hi,
I am sure this question was asked before but why gnome2 metaport installs
mozilla but not firefox?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
am a bit confused here..
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public key: http://www.enderunix.org/ofsen/ofsen.asc
***
AcikAcademy published a Turkish TCP
for not
having any driver specific problems. Can you recommend me one that works
with hylafax and FreeBSD?
Any suggestions?
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public key: http://www.enderunix.org/ofsen
I have installed apache13-modssl 1.3.34+2.8.25_2 to my FreeBSD 6.0-RELEASE.
But when I try to start server using -DSSL I get signal 11s. But when I
disable mod_ssl httpd works fine. Does anybody lived something like that
with FreeBSD 6.0-RELEASE
---
Omer Faruk Sen
help..
I have tried both 5.4 and 6.0
I have used cd image (serveraid support cd) located
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-56811
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public
! message. Has anyone has a
solution for that?
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public key: http://www.enderunix.org/ofsen/ofsen.asc
***
AcikAcademy
Hi
I have installed a new hard drive to my FreeBSD system. Hard drive is 200gb
but
when I fdisk and disklabel the output of df -h is something like that:
/dev/ad1s1e 183G 2.0K 169G 0%/disk2
Here as you can see I can only use 169GB of it. Bios has seen my harddrive
as 190GB
Thanks for all answers. That space problem was bothering me all the times
and I have learnt the reason for space loss. By the way I admit that I have
to make more search on google before sending that to here.
But it can be very nice that this information to be added on handbook. Or is
it in
I have searched on google for a apache2 performance tuning document on
FreeBSD but there is not much document and all of them repeat themselves.
Is there any document for that. By the way is it suggest to compile and run
apache2 on freebsd with ``worker MPM''. And especially is there anyone in
I have seen that NO_LKM option has been removed (a long time ago ) from
supported options in kernel config file.
I want to disable kernel module loading in my system. Is there a way for
that?
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
jail is better
that just chroot environment. But I want to be sure to have your opinions
about it and want be sure which one is better.
Regards,
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public key: http
DESTDIR=/var/jail/2 (This jail must be installed without
compiling everything since it takes time)
REGARDS.
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public key: http://www.enderunix.org/ofsen/ofsen.asc
I have found my own answer..
first buildworld
then
make installworld DESTDIR=$JAIL1
make installworld DESTDIR=$JAIL2
Omer Faruk Sen writes:
Hi,
I have searched Makefiles in /usr/src but couldn't able to find a solution
for my problem. How can I install (e.g. for a jail system) 2
---
This system is HTT enabled 2 Xeon 2.8 GHZ with 2 GB RAM. I have disabled SMP
and recompiled my kernel but my problem (nice and system cpu times..) still
persists.
I would appreciate if any of you help me..
REGARDS.
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software
machine.
Chuck Swiger writes:
Omer Faruk Sen wrote:
I have web server which uses php+mysql. As far as I have searched the
best thing to use mysql on FreeBSD is to use linuxthreads. [ ... ]
240 processes: 7 running, 233 sleeping
CPU states: 10.9% user, 73.9% nice, 12.5% system, 2.7% interrupt
.
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public key: http://www.enderunix.org/ofsen/ofsen.asc
First Turkish FreeBSD book is out! Go check it.
Duydunuz mu! Turkiye'nin ilk FreeBSD
FreeRequests
45649K 2932K50908309
Omer Faruk Sen writes:
Hi
The oid you are talking about is not valid in FreeBSD-4. Maybe you are
talking about FreeBSD-5 sysctl oids? But it does worth to try but I am not
sure which oid it is in FreeBSD 4..
REGARDS
PS: I
..
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public key: http://www.enderunix.org/ofsen/ofsen.asc
First Turkish FreeBSD book is out! Go check it.
Duydunuz mu
of the changes.
Can someone point me the right URL for these changes?
Best Regards,,
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public key: http://www.enderunix.org/ofsen/ofsen.asc
I was thinking to inspect release notes of FreeBSD 5.0, 5.1, 5.2, 5.2.1 and
5.3 have a deep understanding of the changes. Maybe that helps. But I will
see.
Matthew Seaman writes:
On Sun, Nov 21, 2004 at 10:45:19AM +0200, Omer Faruk Sen wrote:
I was about to make slides about changes
:
tunefs -L data /dev/da4s1a
mount /dev/ufs/data /mnt/data
I think my main issue is with the concept of disk labelization. Why one
does need to create /dev/label/xxx or /dev/ufs/xxx instead of standard
/dev/ad2s1a ..
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software
Regards..
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public key: http://www.enderunix.org/ofsen/ofsen.asc
First Turkish FreeBSD book is out! Go check it.
Duydunuz
to this
mailing list so everybody can see what is happening about FreeBSD in Turkey.
Turkish presentations are also avilable if you visit
http://www.enderunix.org/events/metu2004 link.
Best REGARDS.
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
to watch can download them. By the way conference was done in
Turkish language.
Best REGARDS.
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public key: http://www.enderunix.org/ofsen/ofsen.asc
will be aborted
I tried to install system without swap (I thought it may work) but got the
same error. Anyone here had installed FreeBSD 5.3 on this system?
This system has serveRAID-7k in it.
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http
that that is correct. How can I verift that
Driver0 has the problem.
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public key: http://www.enderunix.org/ofsen/ofsen.asc
First
I have a server with LSI MegaSAS 1064R RAID controller which is recognized as
mfid0 . Is there a tool that i can query the status of the raid also the status
of disks? I have tried smartmontools but it didn't work at all..
Regards
--
Best regards,
Omer
Which is broken:
Unfetchable - mark as BROKEN
But thanks again.
Wednesday, December 24, 2008, 4:10:17 PM, you wrote:
Hello Omer,
Wednesday, December 24, 2008, 1:32:05 PM, you wrote:
I have a server with LSI MegaSAS 1064R RAID controller which is
recognized as mfid0 . Is there a tool
How can I detect if system has Software or hardware raid? Since in manual page:
The atacontrol command can also be used to create purely software RAID
arrays in systems that do NOT have a real hardware RAID card such as a
Highpoint or Promise card. A common scenario is a 1U server
Hi,
Can I use zfs on / using FreeBSD 7.1? I also use
http://people.freebsd.org/~rse/mirror/ script to create mirror is
there such a a tool for ZFS to use on Fbsd 7.1?
Regards.
___
freebsd-questions@freebsd.org mailing list
Hi,
I have a running pgsql server but on heavy loads it consumes lots of
time in system (more than %50). I can see that
CPU states: 15.4% user, 0.0% nice, 81.9% system, 1.5% interrupt, 1.2% idle
But how can I debug that kind of system. vmstat and other tools only
show most cpu is used by
Hi,
I have installed a new server to test performance results. BIOS and
RAID BIOS is the latest in this server ( Raid controller is a Intel
SRCSASBB8I )
# dmesg |grep -i mfi
mfi0: LSI MegaSAS 1078 port 0x2000-0x20ff mem
0xb8b0-0xb8b3,0xb8b4-0xb8b7 irq 16 at device 0.0 on
pci10
Hi,
I want to ask if anyone here in this list has any experience with
10gbE on FreeBSD? My questions:
1) Which 10gbE to use? I see that intel has a good support for 10gbE
on FreeBSD with its own driver for FreeBSD:
Hi,
I have tested audit subsystem with FreeBSD 7.1. But the weird thing is
that I only get commands that are executed on console not the ones
that are executed through ssh. Am I missing something here?
I have followed these steps:
http://www.freebsd.org/doc/en/books/handbook/audit-install.html
Hi,
I see process like postgres what is the meaning of in top output
I couldn't find it in the manual page.
Regards.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any
I can't actually apply this patch to FreeBSD 6.3-RELEASE. It seems
ataraid is something not to be used in FreeBSD so I have started to
use gmirror instead. Only downside of it is there are 2 disks shown in
boot loader not one so if F1 (first disk goes) goes you have to
manually select other disk
Hi,
After boot loader multi choice menu FreeBSD 8.0 waits about 2 ~
minutes to boot just showing
|
sign. As far as I know FreeBSD 8.0 uses a new TTY subsystem
OLD one:
w
6:28PM up 5 days, 4:09, 2 users, load averages: 0.00, 0.00, 0.00
USER TTY FROM LOGIN@
Hi,
I am trying to use a Qlogic 2432 chip based card on FreeBSD 7.1 or
7.2. The SAN storage is IBM DS 4800. I get following error on boot and
can't fdisk the fiber LUN.Following is the dmesg output:
da0 at isp1 bus 0 target 0 lun 2
da0: IBM 1815 FAStT 0914 Fixed Direct Access SCSI-5 device
Hi ,
Is there anyone here that have used SAN against IBM DS4800 (Fiber). I
can see disk but i can't fdisk it.
# camcontrol devlist -v
scbus0 on isp0 bus 0:
at scbus0 target -1 lun -1 ()
scbus1 on isp1 bus 0:
IBM 1815 FAStT 0914 at scbus1 target 0
Hi,
Does anyone know that this card NC522SFP is supported under FreeBSD ?
http://h18000.www1.hp.com/products/servers/networking/nc522sfp/index.html
Regards
___
freebsd-questions@freebsd.org mailing list
Merhaba Ewald,
You can read http://communities.netapp.com/thread/39 thread. There is special
mount options for Linux and also for FreeBSD give it a try.
Regards.
Monday, August 3, 2009, 11:55:16 AM, you wrote:
Hi,
I've got a FreeBSD 7.2 box (HP C-class Blade - AMD dual core Opteron
(x64),
Hi,
I have a dual port HBA:
isp0@pci0:2:0:0:class=0x0c0400 card=0x015d1077 chip=0x25321077
rev=0x02 hdr=0x00
vendor = 'QLogic Corporation'
device = '8Gb PCIe x8 Single/Dual Fibre Channel HBA (ISP2532)'
class = serial bus
subclass = Fibre Channel
Hi,
I am looking for a way to replace a kernel module on installation DVD and
rebuild it so i can use it. I have made one about 2-3 years ago based on a
script that i have found on internet but now i couldn't able to find it.
Can someone direct me to the right place or suggest a way to do so
Found answer to my own question
http://www.cyclecide.com/~rudy/example/custom-freebsd.html
is the link that i was looking for this is to replace a precompiled file
(such as adding a kernel module or changing default kernel)
Regards.
On Sat, Feb 11, 2012 at 8:20 PM, Omer Faruk SEN omerf
Or to use a patch file (my friend send this to me) which is a better method
if you can apply patch
http://romana.now.ie/writing/customfreebsdiso.html
On Mon, Feb 13, 2012 at 2:13 PM, Omer Faruk SEN omerf...@gmail.com wrote:
Found answer to my own question
http://www.cyclecide.com/~rudy
Hi,
I am trying to install FreeBSD 8.3-BETA1 to a system with ssd disk
recognized as ad6. At fixit mode i can dd device but at installer
(sysinstall) when I configured disk and using w installer is unable to
format devices stating that
Unable to find device node for /dev/ad6s1b in dev. The
, Michael Powell nightre...@hotmail.comwrote:
Warren Block wrote:
On Wed, 22 Feb 2012, Omer Faruk SEN wrote:
I am trying to install FreeBSD 8.3-BETA1 to a system with ssd disk
recognized as ad6. At fixit mode i can dd device but at installer
(sysinstall) when I configured disk and using w
I have done a simple
dd if=/dev/zero of=/dev/ad6 count=100 bs=1m which i think covers all. But
still no luck.
Regards.
On Fri, Feb 24, 2012 at 8:11 PM, Michael Powell nightre...@hotmail.comwrote:
Warren Block wrote:
On Fri, 24 Feb 2012, Omer Faruk SEN wrote:
Already done that but still
media: Ethernet autoselect (none)
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public key: http://www.enderunix.org/ofsen/ofsen.asc
First Turkish FreeBSD
to all Open Source users.
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public key: http://www.enderunix.org/ofsen/ofsen.asc
First Turkish FreeBSD book is out
Hi,
There was a file in FreeBSD source tree that shows who is responsible for
related driver or program. I couldn't remeber it so I decided to mail it to
here. Can someone point me to the right document in /usr/src?
Best Regards..
---
Omer Faruk Sen
http
Hi,
Has anyone here managed to embedd dropbear ssh server with crunchgen? I
really like to see conf parameters if anyone done that.
Regars.
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public key: http
Hi,
Is there any pam_mkhomedir for FreeBSD? Or has anyone compiled this pam
module ?
Regards.
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public key: http://www.enderunix.org/ofsen/ofsen.asc
Hi,
I have read in this mailing list that snmp support of freeradius
(radiusd) has some issues and it was removed. What is the current (as
of 2.1.10) status of snmp support in radiusd?
Regards.
PS: I may have fully misunderstood this issue because it had been
really very long time. I couldn't
Hi,
I have a system like:
/dev/da0s1a 48G2.2G 42G 5%/
devfs 1.0K1.0K 0B 100%/dev
/dev/da0s1d 72G940M 66G 1%/usr
opt547G 14G534G 2%/opt
/opt is a zfs partition
snmpd.conf :
disk / 1
disk /opt 1
Hi,
Is it suggested to create a zfs on a single 9 TB volume? There is
hardware raid and I am thinking to enable write-back cache on that hw
based raid card.
Regards.
___
freebsd-questions@freebsd.org mailing list
I am a bit confused with the output I get:
# mfiutil cache mfid0
mfi0 volume mfid0 cache settings:
I/O caching: disabled
write caching: write-back
read ahead: always
drive write cache: default
As you can see from above I/O caching is disabled. but I have write
caching:
Hi,
Is there a way to add a package that requires the acceptance of the license
(such as diablo-jdk-1.5.0.07.01_8.tbz) in a script.
I have made a yes yes | pkg_add diablo-jdk-1.5.0.07.01_8.tbz but it didn't
work. Maybe there is an option that can be used somewhere .
Best Regards,
Hi,
I am looking a way in to integrating a afterinstall scripts/files in to
standart FreeBSD sysinstall program. What I think is to add a new
distribution (like src,ports,doc,local..) to FreeBS, create ISO and after
that run after-install script on the chrooted directory.
Can anyone suggest me
Hi,
How can I disable boot messages so user can't see any boot message.
I think there is 4 part for that and each of them requires a different
configuration file to be edited.
1) boot
2) loader
3) kernel message
4) init scripts
Can anyone send me an URL that depicts those changes? Or at least
have also tried esx 3.0.2 without update 1 and has taken the same error
message). If yes have you done anything special for this system ?
BTW: This system is upgraded from first 2.5.4
Regards.
--
Omer Faruk Sen
http://www.faruk.net
--
Best regards,
Omer mailto:[EMAIL
tried esx 3.0.2 without update 1 and has taken the same
error message). If yes have you done anything special for this system ?
BTW: This system is upgraded from first 2.5.4
Regards.
--
Omer Faruk Sen
http://www.faruk.net
___
freebsd-questions
esx 3.0.2 without update 1 and has
taken the same error message). If yes have you done anything special for this
system ?
BTW: This system is upgraded from first 2.5.4
Regards.
--
Omer Faruk Sen
http://www.faruk.net
--
Best regards,
Omermailto:[EMAIL
Hi,
Is it possible to run a script after carp interface becomes MASTER? Ie external
script that runs the required services..
--
Best regards,
Omer mailto:[EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
Hello,
Is there a inventory software in ports tree? What i want is to learn all
hardware details (ram , cpu , mainboard etc. serial numbers and amount of
them). I need a simple program that does this but couldn't able to find in
ports tree
Thanks in advance.
Regards.
--
Best regards,
Tuesday, August 26, 2008, 11:07:31 AM, you wrote:
That's great... Thanks..
On Tue, Aug 26, 2008 at 3:48 PM, Wojciech Puchar
[EMAIL PROTECTED] wrote:
Is there a inventory software in ports tree?
in base system - simply read /var/run/dmesg.boot
sysutils/dmidecode
cat pkg-descr
Hi,
I want to setup a one2many setup so a traffic comes to one interface should be
duplicated to other 2 interfaces like:
# Plumb nodes together
/usr/sbin/ngctl mkpeer vr1: one2many upper one
/usr/sbin/ngctl connect vr1: vr1:upper lower many0
/usr/sbin/ngctl connect vr2: vr1:upper lower
Hi,
Is there a way to use splash screen on amd64 machines? Since whatever I do
it was not possible with 6.3-RELEASE amd64.
Regards.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
Than is there a possibility that we can use to see picture on bootup
(kernel) without using splash (another driver ..) ?
On Mon, Mar 24, 2008 at 4:34 PM, Pieter de Goeje [EMAIL PROTECTED] wrote:
On Monday 24 March 2008, Omer Faruk Sen wrote:
Hi,
Is there a way to use splash screen
Hi,
I am trying to build a install server. I have used make
-DLOADER_TFTP_SUPPORT=YES in /usr/src/obj and copied it over to my /pxeboot/
which I have copied contents from FreeBSD 6.3 Install
cd. But no matter what I have done pxeboot always tries to use nfs but no
tftp. There is a similar thread
Hi,
At
http://lists.freebsd.org/pipermail/freebsd-questions/2004-March/040502.htmlit
states that I can run commands while installing server like:
command=echo keyrate=fast /etc/rc.conf
system
But when I use that I get error I can't issue that command. Is there a
speacial way to execute
Hi,
I wanted to set the minimum length of passwords of my users so I
have done the followings in login.conf
1) added :minpasswordlen=5:\ todefault like:
default:\
:passwd_format=md5:\
:copyright=/etc/COPYRIGHT:\
:welcome=/etc/motd:\
reply.
On Thu, May 8, 2008 at 12:16 AM, Mel
[EMAIL PROTECTED] wrote:
On Wednesday 07 May 2008 23:00:04 Omer Faruk Sen wrote:
I wanted to set the minimum length of passwords of my users so I
have done the followings in login.conf
1) added :minpasswordlen=5:\ todefault like
.
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public key: http://www.enderunix.org/ofsen/ofsen.asc
First Turkish Qmail book is out! Go check it.
Duydunuz mu! Turkiye'nin ilk
:
On 8/19/05, Omer Faruk Sen [EMAIL PROTECTED] wrote:
Hi,
I will be installing a server that will be online for production environment
in 1 month. I want your suggestions if I should use 5.4 or 6 ?
I am thinking to install 6.0-Beta2 and upgrade to 6.0-RELEASE when it comes
out. But I wanted
totally wrong about
this issue?
Best Regards.
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public key: http://www.enderunix.org/ofsen/ofsen.asc
First
Hi,
Is it possible in FreeBSD to rollback a snapshot that is done with
mksnap_ffs or with mount -o snapshot?
It seems that there is no way of doing that in FreeBSD am i right ?
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http
is the true one? To add to device.hints or loader.conf file.
Best Regards.
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public key: http://www.enderunix.org/ofsen/ofsen.asc
Sorry for that. I have missed it. Should be more careful before emailing to
a mailing list ;)
I also mixed loader.conf manual page with acpi manual page.
Lowell Gilbert writes:
Omer Faruk Sen [EMAIL PROTECTED] writes:
Hi, It seems that there is a conflict in manual pages. Or I am
Is there a tool in FreeBSD to use as anti-dos and brute force prevention
automation tool which apf does it for Linux (using iptables).
I especially interested in tools which is based on IPFilter..
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development
.
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
http://www.Faruk.NET
For Public key: http://www.enderunix.org/ofsen/ofsen.asc
First Turkish Qmail book is out! Go check it.
Duydunuz mu
Sorry for the wrong server. It will be x346 not x345...
Omer Faruk Sen wrote:
Hi,
Does FreeBSD support this system without problem? (raid,ethernet...)
Anyone in this list has installed FreeBSD 5.4 or FreeBSD 6
successfully? We are going to buy that system but want to be sure
1 - 100 of 115 matches
Mail list logo