Any settings I can change to reduce the number of timeouts?
Ceri Davies wrote:
On Wed, Oct 09, 2002 at 01:21:25PM -0400, Wolfieee wrote:
Ok, what causes the following events to ocurr and what do I do to fix
whatever is wrong?
DNS lookups timing out.
Ceri
To Unsubscribe:
The request never hits the firewall rule for it to get diverted into nat.
(via INTERFACE, it never goes into that interface).
While I know the cause, I am not sure as to the fix.
Though I am sure an additional firewall rule would probably work to fix it.
Maybe something like
divert 8668 ip
You might try freebsd-hackers or freebsd-stable mailing lists. They are
more technically oriented for things like this.
Nick Rogness wrote:
On Thu, 10 Oct 2002, Marc Hunter wrote:
Hi,
We have just implemented an ipfw and natd firewall and generally it
works great. We are using natd for
Try freebsd-hackers and/or freebsd-stable mailing lists, they are more
technically oriented for stuff like this.
abe wrote:
Hi,
I've written to the list recently with regard to a panic that keeps occuring
and perhaps my message was not formatted as well as it could have been. In more
PROTECTED]] On Behalf Of wolf
Sent: Friday, October 11, 2002 7:37 PM
To: Jonas Fornander
Cc: 'FreeBSD LIST'
Subject: Re: Phone messaging system
a web based job tracking system perhaps?
which each phone call a job, or job followup?
Jonas Fornander wrote:
Is there a good messaging system for interoffice
try updating your ports dir then doing a make clean install
I am using the latest version here, just trying to figure how to make it
work with my bktr card
Kris Kennaway wrote:
On Mon, Oct 14, 2002 at 02:17:16PM -0500, Christopher Schulte wrote:
ffmpeg doesn't want to compile for me
I have a similar problem w/ a machien for a client of mine.
I had to stick the tape drive ALONE on the cable as master.
no slave devices.
Ronnie Schwartz wrote:
I made the tape master and cd slave using jumpers. Still doesn't work. Tar
writes some stuff and it hangs midway. The drive
Is anyone working on getting vmware3 working on FreeBSD ?
I upgraded by system to a Duron and now I can't run anything under
vmware2 that wants the SIMD(?) instructions used. (i.e. Windows 2000/XP,
RedHat 7.3/8.0 etc.)
--
Michael Joyner
FreeBSD System Administrator
for that group. So when
an employee logs into a server I want it to go to some internal
authentication server and tell the server that it's k for that person to
access that file. I want to do this without copying to passwd file to
each server.
Dave
wolf wrote:
could you be more specific?
sharing files
chflags
Chip Wiegand wrote:
I just finished installing 4.7 and want to move /var to /usr/var and
symlink it, but there is an empty subdirectory called empty
(/var/empty). It is not going away when I try to delete the /var
directory after moving it to /usr/var. It has permissions like this:
# Requires scbus and da
as well as,
#device ulpt
# Printer
What should I check for in the bios?
Thanks,
Mark
On Mon, 21 Oct 2002 00:42:04 -0400
wolf [EMAIL PROTECTED] wrote:
Erm, check you lpt0 config in your kernel AND bios.
--
Michael Joyner
FreeBSD System Administrator
http
: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Thomas Wolf
Sent: Thursday, June 03, 2004 3:00 AM
To: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: RE: does NATd _prevent_ use of stateful ipfw rules w/
keep-state?
JJB [EMAIL PROTECTED] schrieb:
Where do you get off calling my
.
AFAIK, it is sufficient to edit /etc/mail/sendmail.cf and
comment or delete the follwoing line:
O DaemonPortOptions=Port=587, Name=MSA, M=E
and restart sendmail afterwards.
regarding ipfw,
reject tcp from any to me 587
would be an appropriate rule.
Thomas
--
Thomas Wolf
Wiener Software
habit. Sorry for advising this.
Thomas
--
Thomas Wolf
Wiener Software Fabrik
Dubas u. Wolf GMBH
1050 Wien, Mittersteig 4
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
Not much return on freebsd-isp.
I try again here on freebsd-questions.
Original-Nachricht
Betreff: Suhosin Segmentation Fault
Datum: Mon, 13 Oct 2008 09:49:09 +0200
Von: Alain Wolf [EMAIL PROTECTED]
An: [EMAIL PROTECTED]
Newsgruppen: gmane.os.freebsd.isp
After upgrading FreeBSD
On 15.10.2008 20:55, Jeremy Chadwick wrote:
On Wed, Oct 15, 2008 at 07:25:08PM +0200, Alain Wolf wrote:
Not much return on freebsd-isp.
I try again here on freebsd-questions.
Original-Nachricht
Betreff: Suhosin Segmentation Fault
Datum: Mon, 13 Oct 2008 09:49:09 +0200
Von
I'm find into /usr/ports/sysutils/apt porting from Debian APT.
How to using this on FreeBSD?
--
With best regards, Alexander Wolf
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
Ivan Voras пишет:
It's probably used for the Linux emulation in FreeBSD, you can't use
it with FreeBSD native packages.
Hmm... I'm maybe can use it for web-applications? Or not?
--
With best regards, Alexander Wolf
___
freebsd-questions
?
--
With best regards, Alexander Wolf
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions-unsubscr...@freebsd.org
I have a Netgear GA511 cardbus gigabit ethernet adapter based on a
supported chipset (Realtek RTL8169) that is not getting detected by
FreeBSD 8 for some reason. Here is the message that appears in dmesg
whenever I insert the card:
cbb0: Warning: Bus reset timeout
The laptop I am trying to use
Did you get an answer to this question? I want to know how to set privs
to allow dir list, upload, but not delete.
Vsftpd not chown'ing uploads
http://lists.freebsd.org/pipermail/freebsd-questions/2003-October/021270
.html
___
installing/enabling Suhosin seems not possible anymore now.
Any suggestions are welcome.
Greetings fomr Switzerland
Alain Wolf
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.5 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 06.10.2006 05:53, * Matt Emmerton wrote:
You've established that the security issue doesn't apply to your
environment.
1) Add DISABLE_VULNERABILITIES=yes to /etc/make.conf
2) Run portupgrade -u or make install clean
Regards,
--
Matt
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 06.10.2006 11:26, * Alex Zbyslaw wrote:
Matt Emmerton wrote:
Hello List,
Portuadit telles my about the open_basedir Race Condition
Vulnerability, OK.
By reading the advisory on
http://www.hardened-php.net/advisory_082006.132.html I can
On 09.02.2007 03:03, * Nicole Harrington wrote:
--- Garrett Cooper [EMAIL PROTECTED] wrote:
Nicole Harrington wrote:
Something setup wrong some place??
cd /usr/src/lib ; make
.
c -pg -O2 -fno-strict-aliasing -pipe
-march=opteron
-I/usr/src/lib/libftpio
-Wall -DINET6 -c
On 11.02.2007 12:54, * Dino Vliet wrote:
Hi folks,
I'm installing a nice system to use as my multimedia
box and already succeeded with geom-mirror. I want to
use a jail to isolate the p2p applications like
amule/emule and want to make sure that they only write
to an encrypted disk
On 12.02.2007 11:52, * Roger Olofsson wrote:
Dear Mailing List,
As usual I would like to thank the replies I go to my earlier questions
and I will try and step up and answer the ones I can.
Now for my question,
After a recent buildworld/portupgrade everything seems to be up to date
On 14.02.2007 12:38, * Peter Pluta wrote:
I recently upgraded to 5.2.1_1. After upgrading (or before not exactly
sure) I began getting errors ALERT - canary mismatch on efree() - heap
overflow detected in my Apache logs. Also, certain parts of one of my
database (mysql) driven sites stopped
=backup.example.com
jail_backup_ip=192.168.0.2
jail_backup_mount_enable=YES
Anybody on this list knows more about jails then what manpage and
handbook tells?
Thanks for any information
Alain Wolf
___
freebsd-questions@freebsd.org mailing list
http
I'm not going to serve any one, I just want to take a small test drive with
FreeBSD .
Regarding my graphic card, it is 32 MB, is it ok?
Does FreeBSD come bundled with GNOME?
Thanks demons!
Olivier Nicole [EMAIL PROTECTED] wrote: I'm thinking to install FreeBSD on
my old PC.
---
Processor:
Hi.
How FreeBSD differ from any Linx distro like Ubuntu?
Thanks.
Deep into that darkness peering, long I stood there, wondering, fearing,
Doubting, dreaming dreams no mortal ever dreamed before.
E.A Poe
-
Be a better friend, newshound, and
Hi.
I'm thinking to install FreeBSD on my old PC.
---
Processor: Intel Celeron 1.3 GH
RAM: 192 MB
---
Is my hard ware sufficient?
Thanks.
Deep into that darkness peering, long I stood there, wondering, fearing,
Doubting, dreaming dreams no mortal ever dreamed before.
E.A Poe
But according to Wikipedia, FreeBSD is able to run Linux compatible software
without any problems (exception for Linux Kernel 2.6)
I can't run Linux software on FreeBSD?
Wojciech Puchar [EMAIL PROTECTED] wrote: Hi.
How FreeBSD differ from any Linx distro like Ubuntu?
by not being linux at
be installed during installation process if I want to.
If I'm wrong, does this mean that I have to connect to Internet during FreeBSD
installation?
Thanks.
Jerry McAllister [EMAIL PROTECTED] wrote: On Tue, Feb 19, 2008 at 01:19:51AM
-0800, Lone Wolf wrote:
I'm not going to serve any one, I just want
Thank you for explanation :)
So, if GNOME/KDE can be installed on FreeBSD, what are the advantages of
BSD-based desktop systems like DesktopBSD/PC-BSD over FreeBSD?
just the graphical installer?
Erich Dollansky [EMAIL PROTECTED] wrote: Hi,
Lone Wolf wrote:
It is not bundled. Almost nothing
I tryed to install FreeBSD on my laptop (compaq nx6105), but it crashes
and returns:
HPTTR :no controller found.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hello dear list,
My FreeBSD 6.0 has several Jails, all running fine.
One of the Jails has installed Bacula Backup Software. And for its File
Deamon (the backup storage server) I would like to mount and unmount the
backup device (an external USB
37 matches
Mail list logo