Re: CD/DVD writer no longer works

2007-12-11 Thread Joerg Schilling
>Cdrecord-Clone 2.01 (i386-unknown-freebsd6.0) Copyright (C) 1995-2004 Jörg 
>Schilling
>TOC Type: 1 = CD-ROM
>scsidev: '1,1,0'
>scsibus: 1 target: 1 lun: 0
>Using libscg version 'schily-0.8'.
>SCSI buffer size: 64512
>atapi: 0
>Device type: Removable CD-ROM
>Version: 0
>Response Format: 2
>Capabilities   :
>Vendor_info: 'TSSTcorp'
>Identifikation : 'CD-RW   TS-H292B'
>Revision   : 'DE03'
>Device seems to be: Generic mmc CD-RW.
>Current: 0x
>Profile: 0x000A
>Profile: 0x0009
>Profile: 0x0008 

1) you are using an extremely outdated cdrecord version. A recent version is 
here:

ftp://ftp.berlios.de/pub/cdrecord/alpha/

Use 2.01.01a36

2) your drive seems to have problems with the medium or is defective as
it reports medium not present and no current profile is selected.

Jörg

-- 
 EMail:[EMAIL PROTECTED] (home) Jörg Schilling D-13353 Berlin
   [EMAIL PROTECTED](uni)  
   [EMAIL PROTECTED] (work) Blog: http://schily.blogspot.com/
 URL:  http://cdrecord.berlios.de/old/private/ ftp://ftp.berlios.de/pub/schily
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"


RE: CD/DVD writer no longer works

2007-12-10 Thread Ted Mittelstaedt


> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Paul Schmehl
> Sent: Thursday, December 06, 2007 1:34 PM
> To: FreeBSD Questions
> Subject: Re: CD/DVD writer no longer works
>
>
> --On Thursday, December 06, 2007 19:14:51 +0100 Wojciech Puchar
> <[EMAIL PROTECTED]> wrote:
>
> >> /home/pauls/Downloads/FreeBSD/6.2-RELEASE-amd64-disc1.iso fixate
> >> burncd: ioctl(CDRIOCWRITESPEED): Input/output error
> >> [EMAIL PROTECTED] mount /dev/acd
> >> acd0  acd1
> >> [EMAIL PROTECTED] mount /dev/acd1 /mnt/cdrom/
> >> mount: /dev/acd1: Input/output error
> >
> > mount_cd9660 - unless you use FFS on CD/DVD.
>
> Yeah, I knew that.  Just mistyped it.  The results are the same in either
> case - input/output error.
>
> >> CDB:  00 00 00 00 00 00
> >> status: 0x2 (CHECK CONDITION)
> >> Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00
> 00 00 00 00
> >> 00  00 00 00 00 00 00 00 00 00 00 00
> >> Sense Key: 0x2 Not Ready, Segment 0
> >> Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
> >> Sense flags: Blk 0 (not valid)
> >> cmd finished after 0.000s timeout 40s
> >> cdrecord: No disk / Wrong disk!
> >>
> >
> > looks like your device is broken - reports no disk
>
> Does this provide any additional information?
> [EMAIL PROTECTED] atacontrol cap acd1
>
> Protocol  ATA/ATAPI revision 5
> device model  TSSTcorpCD-RW TS-H292B
> serial number
> firmware revision DE03
> cylinders 0
> heads 0
> sectors/track 0
> lba supported
> lba48 not supported
> dma supported
> overlap not supported
>
> Feature  Support  EnableValue   Vendor
> write cacheno   no
> read ahead no   no
> Tagged Command Queuing (TCQ)   no   no  0/0x00
> SMART  no   no
> microcode download no   no
> security   no   no
> power management   yes  yes
> advanced power management  no   no  0/0x00
> automatic acoustic management  no   no  0/0x00  0/0x00
>
> The result of this command doesn't change if there's a known good
> CD in the
> drive.  And are you saying that the *device* appears to be bad?  Or the
> *driver* appears to be bad?  Is there a way to confirm this
> (utility?  test
> process?)
>

Blow CD drive out real well with a can of compressed air.

You might have dust obscuring the optical pickup that tells
the drive that there's a disk in it.

If that doesen't work, then scrap the drive.  New ones are very
cheap.  Or better yet get yourself a nice DVD burner.

You can confirm the drive is bad by testing it under Windows.
This is assuming of course that you don't trust FreeBSD.
Presumably you have access to another system you can swap the
drive out with.

Ted
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.503 / Virus Database: 269.17.0/1180 - Release Date: 12/10/2007
2:51 PM

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"


Re: CD/DVD writer no longer works

2007-12-07 Thread Paul Schmehl
--On Thursday, December 06, 2007 19:14:51 +0100 Wojciech Puchar 
<[EMAIL PROTECTED]> wrote:



/home/pauls/Downloads/FreeBSD/6.2-RELEASE-amd64-disc1.iso fixate
burncd: ioctl(CDRIOCWRITESPEED): Input/output error
[EMAIL PROTECTED] mount /dev/acd
acd0  acd1
[EMAIL PROTECTED] mount /dev/acd1 /mnt/cdrom/
mount: /dev/acd1: Input/output error


mount_cd9660 - unless you use FFS on CD/DVD.

CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 00 00 00 00
00  00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 40s
cdrecord: No disk / Wrong disk!



looks like your device is broken - reports no disk


Looks like this is it.  To verify I booted into Windows (which I almost 
never do), and the drive doesn't work - it can't even read a disk.  So it's 
an apparent hardware failure.


--
Paul Schmehl ([EMAIL PROTECTED])
Senior Information Security Analyst
The University of Texas at Dallas
http://www.utdallas.edu/ir/security/

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"


Re: CD/DVD writer no longer works

2007-12-06 Thread Girish Venkatachalam
On 11:34:25 Dec 06, Paul Schmehl wrote:
> 

[..]

> I can see the device using atacontrol.
> [EMAIL PROTECTED] atacontrol info ata0
> Master: acd0  ATA/ATAPI revision 6
> Slave:  acd1  ATA/ATAPI revision 5

[..]

> Drive buf size : 1016064 = 992 KB
> FIFO size  : 4194304 = 4096 KB
> Track 01: data   616 MB
> Total size:  707 MB (70:07.13) = 315535 sectors
> Lout start:  708 MB (70:09/10) = 315535 sectors
> cdrecord: Input/output error. test unit ready: scsi sendcmd: retryable error
> CDB:  00 00 00 00 00 00
> status: 0x2 (CHECK CONDITION)
> Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 00 00 00 00 00 
> 00 00 00 00 00 00 00 00 00 00 00
> Sense Key: 0x2 Not Ready, Segment 0
> Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
> Sense flags: Blk 0 (not valid)
> cmd finished after 0.000s timeout 40s
> cdrecord: No disk / Wrong disk!
> 
> I just upgraded from FreeBSD 6.0 RELEASE to 6.2 RELEASE hoping that might 
> solve the problem.  (I cvsupped the sources and ran make 
> buildworld/buildkernel, etc.)
> 
> Do I have a hardware failure?  Or is something else wrong?

Check your jumpers. I had a similar problem that I fixed by using the
right jumper on the CD/DVD drive.

-Girish
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"


Re: CD/DVD writer no longer works

2007-12-06 Thread Robert Marella
On Thu, 06 Dec 2007 15:34:01 -0600
Paul Schmehl <[EMAIL PROTECTED]> wrote:


> The result of this command doesn't change if there's a known good CD
> in the drive.  And are you saying that the *device* appears to be
> bad?  Or the *driver* appears to be bad?  Is there a way to confirm
> this (utility?  test process?)
> 
FWIW, I had similar problems with a DVD burner a couple of weeks ago. I
went ahead and replaced it and the troubles went away. You could try
and see if you could boot a live file system with it. Or, boot from
another optical drive (if you have one) on the system with something
like freesbie/ubuntu and see if it works with the live file system.

HTH
Robert
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"


Re: CD/DVD writer no longer works

2007-12-06 Thread Paul Schmehl
--On Thursday, December 06, 2007 19:14:51 +0100 Wojciech Puchar 
<[EMAIL PROTECTED]> wrote:



/home/pauls/Downloads/FreeBSD/6.2-RELEASE-amd64-disc1.iso fixate
burncd: ioctl(CDRIOCWRITESPEED): Input/output error
[EMAIL PROTECTED] mount /dev/acd
acd0  acd1
[EMAIL PROTECTED] mount /dev/acd1 /mnt/cdrom/
mount: /dev/acd1: Input/output error


mount_cd9660 - unless you use FFS on CD/DVD.


Yeah, I knew that.  Just mistyped it.  The results are the same in either 
case - input/output error.



CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 00 00 00 00
00  00 00 00 00 00 00 00 00 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 40s
cdrecord: No disk / Wrong disk!



looks like your device is broken - reports no disk


Does this provide any additional information?
[EMAIL PROTECTED] atacontrol cap acd1

Protocol  ATA/ATAPI revision 5
device model  TSSTcorpCD-RW TS-H292B
serial number
firmware revision DE03
cylinders 0
heads 0
sectors/track 0
lba supported
lba48 not supported
dma supported
overlap not supported

Feature  Support  EnableValue   Vendor
write cacheno   no
read ahead no   no
Tagged Command Queuing (TCQ)   no   no  0/0x00
SMART  no   no
microcode download no   no
security   no   no
power management   yes  yes
advanced power management  no   no  0/0x00
automatic acoustic management  no   no  0/0x00  0/0x00

The result of this command doesn't change if there's a known good CD in the 
drive.  And are you saying that the *device* appears to be bad?  Or the 
*driver* appears to be bad?  Is there a way to confirm this (utility?  test 
process?)


--
Paul Schmehl ([EMAIL PROTECTED])
Senior Information Security Analyst
The University of Texas at Dallas
http://www.utdallas.edu/ir/security/

___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"


Re: CD/DVD writer no longer works

2007-12-06 Thread Wojciech Puchar

/home/pauls/Downloads/FreeBSD/6.2-RELEASE-amd64-disc1.iso fixate
burncd: ioctl(CDRIOCWRITESPEED): Input/output error
[EMAIL PROTECTED] mount /dev/acd
acd0  acd1
[EMAIL PROTECTED] mount /dev/acd1 /mnt/cdrom/
mount: /dev/acd1: Input/output error


mount_cd9660 - unless you use FFS on CD/DVD.

CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0A 00 00 00 00 3A 00 00 00 00 00 00 00 00 
00 00 00 00 00 00 00 00 00 00 00

Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 40s
cdrecord: No disk / Wrong disk!



looks like your device is broken - reports no disk
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"