Re: cardbus not working
Christian Walther wrote: Hi Felix, On 23/01/07, felix.schalck [EMAIL PROTECTED] wrote: Hi, I'm trying to get a WLAN pcmcia card working on freebsd 6.2. Kernel with cardbus support compiled fine, but when the card is inserted, i get: Status is 0x3086 Status is 0x3820 cbb0: card inserted: event=0x, state=3820 cbb0: cbb_power: 3V cbb0: cbb_power: 0V Dmesg shows: cbb0: ENE CB1410 PCI-CardBus Bridge at device 7.0 on pci2 cbb0: Found memory at e0202000 cbb0: Secondary bus is 2 cardbus0: CardBus bus on cbb0 pccard0: 16-bit PCCard bus on cbb0 Any ideas ? What are my possibilities/chances to get it work ? Please provide some more information about your system. Is this a laptop, or are you using a PCMCIA- to PCI-Adapter with a desktop system? What model is your laptop or desktop system? Did you load the appropriate driver for your WLAN card, or is it compiled into the kernel? Thank you very much for your help; You're absolutely right: sorry for the poor infos: Card is an orinoco gold 8470 wd with the *theoretically* supported atheros chipset. Drivers ath_hal is compiled into kernel: Perhaps I'shoud try it with separate kernel-module ? #Atheros chipset support device ath device ath_hal device ath_rate_sample # wireless options device wlan_wep device wlan_ccmp device wlan_tkip device wlan_xauth device wlan_acl pciconf -l shows: [EMAIL PROTECTED]:0:0:class=0x06 card=0x01201558 chip=0x35808086 rev=0x02 hdr=0x00 [EMAIL PROTECTED]:0:1: class=0x088000 card=0x01201558 chip=0x35848086 rev=0x02 hdr=0x00 [EMAIL PROTECTED]:0:3: class=0x088000 card=0x01201558 chip=0x35858086 rev=0x02 hdr=0x00 [EMAIL PROTECTED]:2:0: class=0x03 card=0x01201558 chip=0x35828086 rev=0x02 hdr=0x00 [EMAIL PROTECTED]:2:1: class=0x038000 card=0x01201558 chip=0x35828086 rev=0x02 hdr=0x00 [EMAIL PROTECTED]:29:0:class=0x0c0300 card=0x01201558 chip=0x24c28086 rev=0x03 hdr=0x00 [EMAIL PROTECTED]:29:1:class=0x0c0300 card=0x01201558 chip=0x24c48086 rev=0x03 hdr=0x00 [EMAIL PROTECTED]:29:2:class=0x0c0300 card=0x01201558 chip=0x24c78086 rev=0x03 hdr=0x00 [EMAIL PROTECTED]:29:7:class=0x0c0320 card=0x01201558 chip=0x24cd8086 rev=0x03 hdr=0x00 [EMAIL PROTECTED]:30:0:class=0x060400 card=0x chip=0x24488086 rev=0x83 hdr=0x01 [EMAIL PROTECTED]:31:0:class=0x060100 card=0x chip=0x24cc8086 rev=0x03 hdr=0x00 [EMAIL PROTECTED]:31:1: class=0x01018a card=0x01201558 chip=0x24ca8086 rev=0x03 hdr=0x00 [EMAIL PROTECTED]:31:3:class=0x0c0500 card=0x01201558 chip=0x24c38086 rev=0x03 hdr=0x00 [EMAIL PROTECTED]:31:5: class=0x040100 card=0x01201558 chip=0x24c58086 rev=0x03 hdr=0x00 [EMAIL PROTECTED]:31:6:class=0x070300 card=0x01201558 chip=0x24c68086 rev=0x03 hdr=0x00 [EMAIL PROTECTED]:6:0: class=0x02 card=0x01201558 chip=0x813910ec rev=0x10 hdr=0x00 [EMAIL PROTECTED]:7:0: class=0x060700 card=0x01201558 chip=0x14101524 rev=0x01 hdr=0x02 [EMAIL PROTECTED]:8:0: class=0x028000 card=0x27028086 chip=0x42208086 rev=0x05 hdr=0x00 So, do you think the problem is due to the cardbus, or to the inserted card ? Thanks again for your help, Felix ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED] ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cardbus not working
felix.schalck wrote: Hi, I'm trying to get a WLAN pcmcia card working on freebsd 6.2. Kernel with cardbus support compiled fine, but when the card is inserted, i get: Status is 0x3086 Status is 0x3820 cbb0: card inserted: event=0x, state=3820 cbb0: cbb_power: 3V cbb0: cbb_power: 0V Dmesg shows: cbb0: ENE CB1410 PCI-CardBus Bridge at device 7.0 on pci2 cbb0: Found memory at e0202000 cbb0: Secondary bus is 2 cardbus0: CardBus bus on cbb0 pccard0: 16-bit PCCard bus on cbb0 Any ideas ? What are my possibilities/chances to get it work ? First shot, and it's from the dark* ... You don't mention the type of WLAN card. It *looks to me as if* you don't have driver support for this card. What's the chipset, and have you researched to see if the card is supported? Also, what output does 'pciconf -l' produce? Kevin D. Kinsey *I'm not a wireless guru, and don't play one on TV. P.S. I didn't choose this .sig intentionally ;-) -- You'll feel much better once you've given up hope. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: cardbus not working
Hi Felix, On 23/01/07, felix.schalck [EMAIL PROTECTED] wrote: Hi, I'm trying to get a WLAN pcmcia card working on freebsd 6.2. Kernel with cardbus support compiled fine, but when the card is inserted, i get: Status is 0x3086 Status is 0x3820 cbb0: card inserted: event=0x, state=3820 cbb0: cbb_power: 3V cbb0: cbb_power: 0V Dmesg shows: cbb0: ENE CB1410 PCI-CardBus Bridge at device 7.0 on pci2 cbb0: Found memory at e0202000 cbb0: Secondary bus is 2 cardbus0: CardBus bus on cbb0 pccard0: 16-bit PCCard bus on cbb0 Any ideas ? What are my possibilities/chances to get it work ? Please provide some more information about your system. Is this a laptop, or are you using a PCMCIA- to PCI-Adapter with a desktop system? What model is your laptop or desktop system? Did you load the appropriate driver for your WLAN card, or is it compiled into the kernel? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]
Re: Cardbus not working for 3com 656B netcard
Ok This is an update on my Problem getting this network card working. as stated previously..: Hello everyone, back in the days of 5.1.xxx my 3com CFM656B (That's not the exact model number sorry but it's in my machine at home at the moment.) worked beautifully. I had changed to the 5.1 branch of FreeBSD because finally I could use something other than a ratty Linksys 10mbps pccard in my laptop. I cvsup'd religeously and the world built well (usually) and the kernels kernelled and I was a righteous FreeBSD guru. But then.. 5.2.1 hit and my 3com netcard no longer functioned. I searched high and low for fixes, answers cvsup every chance I had and never once did the card work again. Everything shows normal in the dmesg but the bus never resets and the system can't get the station address. I checked interrupts and the card bus is there sharing life with the pccard interface at irq 10. If I'm using 5.1 of the OS (which I reinstalled the other day because i'm trying to get my new Linksys wifi card running) the 3com works and data flows at a reasonable rate. Does anyone know of a fix for the cardbus since that's the only thing I can find that seems like it's out of wack? same hardware works fine with 5.1 but 5.2 is toiletville. My 10mbps linksys card still works but it is a 16 bit pccard and nothing and no cards that I have that are 32bit cardbus work at all. This is on a IBM Iseries thinkpad 1141. It's been my main work horse since I bought it in 2000. Please help make a ratty old laptop useful again. I'll do what I can to provide information to get this problem fixed. Since I see current is now trying to breath life into FreeBSD-6.0 and I would hate to see this problem continue. Thank you in advance for everything. Sincerely Davon The card is a 3CCFEM656B. Earlier Dave McCammon siggested this patch.. http://lists.freebsd.org/pipermail/freebsd-mobile/2004-September/004726.html Which I applied to FreeBSD 5.3Beta4 cleanly but it made no difference. I checked vmstat -i and found cbb0 and uhci0 on irq 10. So Just in case there was a conflict I removed the uhci driver so cbb0 was the only thing on irq 10. I put the card in after I booted up and set all the debug for cis,cardbus and cbb Copyright (c) 1992-2004 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.3-BETA4 #6: Thu Sep 16 22:17:35 CDT 2004 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/PONY Timecounter i8254 frequency 1193182 Hz quality 0 CPU: Intel Celeron (548.87-MHz 686-class CPU) Origin = GenuineIntel Id = 0x683 Stepping = 3 Features=0x383f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE real memory = 201195520 (191 MB) avail memory = 187215872 (178 MB) npx0: [FAST] npx0: math processor on motherboard npx0: INT 16 interface acpi0: IBM ATLANTA on motherboard acpi0: Power Button (fixed) acpi_ec0: Embedded Controller: GPE 0x18 port 0x66,0x62 on acpi0 Timecounter ACPI-fast frequency 3579545 Hz quality 1000 acpi_timer0: 24-bit timer at 3.579545MHz port 0xf008-0xf00b on acpi0 cpu0: ACPI CPU (2 Cx states) on acpi0 acpi_tz0: Thermal Zone on acpi0 acpi_button0: Sleep Button on acpi0 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0 acpi link get: empty IRQ resource pci0: ACPI PCI bus on pcib0 pci0: multimedia, audio at device 0.1 (no driver attached) pci0: simple comms at device 0.2 (no driver attached) pci0: display, VGA at device 2.0 (no driver attached) cbb0: O2Micro OZ6812/6872 PCI-CardBus Bridge irq 10 at device 3.0 on pci0 cardbus0: CardBus bus on cbb0 pccard0: 16-bit PCCard bus on cbb0 isab0: PCI-ISA bridge at device 7.0 on pci0 isa0: ISA bus on isab0 atapci0: Intel PIIX4 UDMA33 controller port 0x8040-0x804f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 ata0: channel #0 on atapci0 ata1: channel #1 on atapci0 pci0: serial bus, USB at device 7.2 (no driver attached) pci0: bridge, PCI-unknown at device 7.3 (no driver attached) acpi_lid0: Control Method Lid Switch on acpi0 acpi_acad0: AC Adapter on acpi0 acpi_cmbat0: Control Method Battery on acpi0 atkbdc0: Keyboard controller (i8042) port 0x64,0x60 irq 1 on acpi0 atkbd0: AT Keyboard irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: PS/2 Mouse irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 orm0: ISA Option ROM at iomem 0xc-0xcbfff on isa0 pmtimer0 on isa0 fdc0: cannot reserve I/O port range (6 ports) ppc0: parallel port not found. sc0: System console at flags 0x100 on isa0 sc0: VGA 16 virtual consoles, flags=0x300 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled vga0: Generic ISA VGA at port
Re: Cardbus not working for 3com 656B netcard
--- Davon Shire [EMAIL PROTECTED] wrote: Hello everyone, back in the days of 5.1.xxx my 3com CFM656B (That's not the exact model number sorry but it's in my machine at home at the moment.) worked beautifully. I had changed to the 5.1 branch of FreeBSD because finally I could use something other than a ratty Linksys 10mbps pccard in my laptop. I cvsup'd religeously and the world built well (usually) and the kernels kernelled and I was a righteous FreeBSD guru. But then.. 5.2.1 hit and my 3com netcard no longer functioned. I searched high and low for fixes, answers cvsup every chance I had and never once did the card work again. Everything shows normal in the dmesg but the bus never resets and the system can't get the station address. I checked interrupts and the card bus is there sharing life with the pccard interface at irq 10. If I'm using 5.1 of the OS (which I reinstalled the other day because i'm trying to get my new Linksys wifi card running) the 3com works and data flows at a reasonable rate. Does anyone know of a fix for the cardbus since that's the only thing I can find that seems like it's out of wack? same hardware works fine with 5.1 but 5.2 is toiletville. My 10mbps linksys card still works but it is a 16 bit pccard and nothing and no cards that I have that are 32bit cardbus work at all. This is on a IBM Iseries thinkpad 1141. It's been my main work horse since I bought it in 2000. Please help make a ratty old laptop useful again. I'll do what I can to provide information to get this problem fixed. Since I see current is now trying to breath life into FreeBSD-6.0 and I would hate to see this problem continue. Thank you in advance for everything. Sincerely Davon If you are getting dmesg errors similar to kernel: cbb0: cbb_power: 0V kernel: cbb0: bad Vcc request. ctrl=0xf000ff00, status=0xf000e2c3 kernel: cbb_power: 0V Try this patch ? http://lists.freebsd.org/pipermail/freebsd-mobile/2004-September/004726.html I have a 3com575B that quit working after going to 5.3 beta from 5.2.1. The above patch made it work again. Here is another that may help. http://www.freebsd.org/cgi/query-pr.cgi?pr=66848 __ Do you Yahoo!? New and Improved Yahoo! Mail - 100MB free storage! http://promotions.yahoo.com/new_mail ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to [EMAIL PROTECTED]