Re: xorg 7.2 start problem
Kris Kennaway wrote: On Wed, May 23, 2007 at 01:07:18AM -0700, Andriy Babiy wrote: I guess you missed the several replies (and the note in UPDATING) telling you to install the xorg port to obtain a complete xorg installation. Kris Thank you Kris. Now I see, I didn't have xorg meta-port installed, that was my fault. Do I have any chance to fix a mistake by installing it now, or the whole rebuild is the only way? Just install it, it will install the rest of your missing bits. FWIW I encountered this too - and it persisted after installing the xorg meta-port, and was not sorted until I did deinstall/reinstall on font-misc-misc and font-cursor-misc. Cheers Mark ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: xorg 7.2 start problem
On Wed, May 23, 2007 at 01:07:18AM -0700, Andriy Babiy wrote: > > I guess you missed the several replies (and the note in UPDATING) > > telling you to install the xorg port to obtain a complete xorg > > installation. > > > > Kris > > Thank you Kris. > Now I see, I didn't have xorg meta-port installed, that was my fault. > Do I have any chance to fix a mistake by installing it now, or the whole > rebuild is the only way? Just install it, it will install the rest of your missing bits. Kris ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: xorg 7.2 start problem
> I guess you missed the several replies (and the note in UPDATING) > telling you to install the xorg port to obtain a complete xorg > installation. > > Kris Thank you Kris. Now I see, I didn't have xorg meta-port installed, that was my fault. Do I have any chance to fix a mistake by installing it now, or the whole rebuild is the only way? Andriy ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: xorg 7.2 start problem
On Wed, May 23, 2007 at 12:47:28AM -0700, Andriy Babiy wrote: > > You need at least the following ports: > > > > x11-drivers/xf86-video-mga > > x11-drivers/xf86-input-mouse > > x11-drivers/xf86-input-keyboard > > I wanted to thank everybody who helped me. I added those ports, and that > fixed the problem I had before. So, I was able to issue: > X -configure > and obtain xorg.conf.new file. I checked the configuration and found that > the hardware was recognized without errors. The pathes were changed > to /usr/local accordingly. > > But when I issue: > X -config /root/xorg.conf.new > > the X server doesn't start; it fails with the message: > > Fatal server error: > could not open default font 'fixed' > > I checked xorg.conf.new and found that the pathes to appropriate fonts are > listed there, namely: > > xorg-fonts-100dpi-7.2 > xorg-fonts-75dpi-7.2 > xorg-fonts-cyrillic-7.2 > xorg-fonts-miscbitmaps-7.2 > xorg-fonts-truetype-7.2 > xorg-fonts-type1-7.2 > > I checked all the directories; they exist, and their contents exist. I > tried mkfontdir in each of them, but it changed nothing. > > Maybe, you could advise me what I need to do in order to resolve it, apart > from rebuilding the whole thing. Thank you very much in advance! I guess you missed the several replies (and the note in UPDATING) telling you to install the xorg port to obtain a complete xorg installation. Kris ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: xorg 7.2 start problem
> You need at least the following ports: > > x11-drivers/xf86-video-mga > x11-drivers/xf86-input-mouse > x11-drivers/xf86-input-keyboard I wanted to thank everybody who helped me. I added those ports, and that fixed the problem I had before. So, I was able to issue: X -configure and obtain xorg.conf.new file. I checked the configuration and found that the hardware was recognized without errors. The pathes were changed to /usr/local accordingly. But when I issue: X -config /root/xorg.conf.new the X server doesn't start; it fails with the message: Fatal server error: could not open default font 'fixed' I checked xorg.conf.new and found that the pathes to appropriate fonts are listed there, namely: xorg-fonts-100dpi-7.2 xorg-fonts-75dpi-7.2 xorg-fonts-cyrillic-7.2 xorg-fonts-miscbitmaps-7.2 xorg-fonts-truetype-7.2 xorg-fonts-type1-7.2 I checked all the directories; they exist, and their contents exist. I tried mkfontdir in each of them, but it changed nothing. Maybe, you could advise me what I need to do in order to resolve it, apart from rebuilding the whole thing. Thank you very much in advance! Andriy ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: xorg 7.2 start problem
On Mon, 21 May 2007, Andriy Babiy wrote: Hi everybody, To upgrade xorg, I followed the procedure described in the /usr/ports/UPDATING file. The build went smooth, without any build errors. At the merge step, the script complained about mime.info files, so I made backup copy of those and deleted the duplicates. But after reboot I cannot start X. On that machine, I use xfce4. When I issue startxfce4, I receive messages that modules kbd, mouse, and mga haven't been found. During the build I didn't see any errors; presumably, it's a configuration error. Could you advise me on where I should look for an error? It's i386 machine, with 6.2 stable. The Xorg.0.log file is enclosed. Errors are at the end pf the file. Thank you very much in advance! Andriy Of course you created a new xorg.conf ?? Module paths changed from /usr/X11R6 to /usr/local/ . Regards, Uli. _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 _XSERVTransOpen: transport open failed for inet6/S01060040ca14628b:0 _XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6 X Window System Version 7.2.0 Release Date: 22 January 2007 X Protocol Version 11, Revision 0, Release 7.2 Build Operating System: FreeBSD 6.2-STABLE i386 Current Operating System: FreeBSD S01060040ca14628b 6.2-STABLE FreeBSD 6.2-STABLE #0: Fri May 11 03:30:47 PDT 2007 root@:/usr/obj/usr/src/sys/HP386 i386 Build Date: 20 May 2007 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 21 16:42:21 2007 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Simple Layout" (**) |-->Screen "Screen 1" (0) (**) | |-->Monitor "HP-D8896" (**) | |-->Device "Matrox" (**) |-->Input Device "Mouse1" (**) |-->Input Device "Keyboard1" (WW) `fonts.dir' not found (or not valid) in "/usr/local/lib/X11/fonts/local/". Entry deleted from font path. (Run 'mkfontdir' on "/usr/local/lib/X11/fonts/local/"). (**) FontPath set to: /usr/local/lib/X11/fonts/misc/, /usr/local/lib/X11/fonts/TTF/, /usr/local/lib/X11/fonts/OTF, /usr/local/lib/X11/fonts/Type1/, /usr/local/lib/X11/fonts/100dpi/, /usr/local/lib/X11/fonts/75dpi/ (==) RgbPath set to "/usr/local/share/X11/rgb" (==) ModulePath set to "/usr/local/lib/xorg/modules" (II) Loader magic: 0x81c0340 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.1 X.Org XInput driver : 0.7 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on freebsd (II) LoadModule: "pcidata" (II) Loading /usr/local/lib/xorg/modules//libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 7.2.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.1 (--) Using syscons driver with X support (version 2.0) (--) using VT number 9 (II) PCI: Probing config type using method 1 (II) PCI: Config type is 1 (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = 0x8000 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,7190 card , rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,7191 card , rev 03 class 06,04,00 hdr 01 (II) PCI: 00:04:0: chip 8086,7110 card , rev 02 class 06,01,00 hdr 80 (II) PCI: 00:04:1: chip 8086,7111 card , rev 01 class 01,01,80 hdr 00 (II) PCI: 00:04:2: chip 8086,7112 card , rev 01 class 0c,03,00 hdr 00 (II) PCI: 00:04:3: chip 8086,7113 card , rev 02 class 06,80,00 hdr 00 (II) PCI: 00:06:0: chip 1013,6003 card 1013,4280 rev 01 class 04,01,00 hdr 00 (II) PCI: 00:0b:0: chip 10b7,9055 card 10b7,9055 rev 30 class 02,00,00 hdr 00 (II) PCI: 01:00:0: chip 102b,0521 card 102b,ff00 rev 03 class 03,00,00 hdr 00 (II) PCI: End of PCI scan (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x - 0x (0x1) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x - 0x (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x008c (VGA_EN is set) (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xf420 - 0xf4ff (0xe0) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xf500 - 0xf5ff (0x100) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:4:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (--) PCI:*(1:0:0) Matrox Graphics, Inc. MGA G200 AGP rev 3, Mem @ 0xf500/24, 0xf420/14, 0xf480/23 (II) A
Re: xorg 7.2 start problem
Andriy schrieb: > (II) Loading font FreeType > (II) LoadModule: "mga" > (WW) Warning, couldn't open module mga > (II) UnloadModule: "mga" > (EE) Failed to load module "mga" (module does not exist, 0) > (II) LoadModule: "mouse" > (WW) Warning, couldn't open module mouse > (II) UnloadModule: "mouse" > (EE) Failed to load module "mouse" (module does not exist, 0) > (II) LoadModule: "kbd" > (WW) Warning, couldn't open module kbd > (II) UnloadModule: "kbd" > (EE) Failed to load module "kbd" (module does not exist, 0) > (EE) No drivers available. You need at least the following ports: x11-drivers/xf86-video-mga x11-drivers/xf86-input-mouse x11-drivers/xf86-input-keyboard Regards Björn ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: xorg 7.2 start problem
On Mon, May 21, 2007 at 06:23:29PM -0700, Andriy Babiy wrote: > Hi everybody, > > To upgrade xorg, I followed the procedure described in > the /usr/ports/UPDATING file. The build went smooth, without any build > errors. At the merge step, the script complained about mime.info files, so > I made backup copy of those and deleted the duplicates. > But after reboot I cannot start X. On that machine, I use xfce4. When I > issue startxfce4, I receive messages that modules kbd, mouse, and mga > haven't been found. > During the build I didn't see any errors; presumably, it's a configuration > error. Could you advise me on where I should look for an error? > It's i386 machine, with 6.2 stable. The Xorg.0.log file is enclosed. Errors > are at the end pf the file. > Thank you very much in advance! Hard to guess without the information requested in UPDATING, but it could be that you don't have the complete xorg installed (i.e. missing /usr/ports/x11/xorg). Kris ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: xorg 7.2 start problem
On Monday 21 May 2007, Andriy Babiy said: > Hi everybody, > > To upgrade xorg, I followed the procedure described in > the /usr/ports/UPDATING file. The build went smooth, without any > build errors. At the merge step, the script complained about > mime.info files, so I made backup copy of those and deleted the > duplicates. > But after reboot I cannot start X. On that machine, I use xfce4. > When I issue startxfce4, I receive messages that modules kbd, > mouse, and mga haven't been found. > During the build I didn't see any errors; presumably, it's a > configuration error. Could you advise me on where I should look for > an error? It's i386 machine, with 6.2 stable. The Xorg.0.log file > is enclosed. Errors are at the end pf the file. > Thank you very much in advance! > > Andriy > > > _XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6 > _XSERVTransOpen: transport open failed for > inet6/S01060040ca14628b:0 _XSERVTransMakeAllCOTSServerListeners: > failed to open listener for inet6 > > X Window System Version 7.2.0 > Release Date: 22 January 2007 > X Protocol Version 11, Revision 0, Release 7.2 > Build Operating System: FreeBSD 6.2-STABLE i386 > Current Operating System: FreeBSD S01060040ca14628b 6.2-STABLE > FreeBSD 6.2-STABLE #0: Fri May 11 03:30:47 PDT 2007 > root@:/usr/obj/usr/src/sys/HP386 i386 > Build Date: 20 May 2007 > Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > Module Loader present > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/Xorg.0.log", Time: Mon May 21 16:42:21 > 2007 (==) Using config file: "/etc/X11/xorg.conf" > (==) ServerLayout "Simple Layout" > (**) |-->Screen "Screen 1" (0) > (**) | |-->Monitor "HP-D8896" > (**) | |-->Device "Matrox" > (**) |-->Input Device "Mouse1" > (**) |-->Input Device "Keyboard1" > (WW) `fonts.dir' not found (or not valid) > in "/usr/local/lib/X11/fonts/local/". > Entry deleted from font path. > (Run 'mkfontdir' on "/usr/local/lib/X11/fonts/local/"). > (**) FontPath set to: > /usr/local/lib/X11/fonts/misc/, > /usr/local/lib/X11/fonts/TTF/, > /usr/local/lib/X11/fonts/OTF, > /usr/local/lib/X11/fonts/Type1/, > /usr/local/lib/X11/fonts/100dpi/, > /usr/local/lib/X11/fonts/75dpi/ > (==) RgbPath set to "/usr/local/share/X11/rgb" > (==) ModulePath set to "/usr/local/lib/xorg/modules" > (II) Loader magic: 0x81c0340 > (II) Module ABI versions: > X.Org ANSI C Emulation: 0.3 > X.Org Video Driver: 1.1 > X.Org XInput driver : 0.7 > X.Org Server Extension : 0.3 > X.Org Font Renderer : 0.5 > (II) Loader running on freebsd > (II) LoadModule: "pcidata" > (II) Loading /usr/local/lib/xorg/modules//libpcidata.so > (II) Module pcidata: vendor="X.Org Foundation" > compiled for 7.2.0, module version = 1.0.0 > ABI class: X.Org Video Driver, version 1.1 > (--) Using syscons driver with X support (version 2.0) > (--) using VT number 9 > > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x, mode1Res1 = > 0x8000 (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 8086,7190 card , rev 03 class > 06,00,00 hdr 00 > (II) PCI: 00:01:0: chip 8086,7191 card , rev 03 class > 06,04,00 hdr 01 > (II) PCI: 00:04:0: chip 8086,7110 card , rev 02 class > 06,01,00 hdr 80 > (II) PCI: 00:04:1: chip 8086,7111 card , rev 01 class > 01,01,80 hdr 00 > (II) PCI: 00:04:2: chip 8086,7112 card , rev 01 class > 0c,03,00 hdr 00 > (II) PCI: 00:04:3: chip 8086,7113 card , rev 02 class > 06,80,00 hdr 00 > (II) PCI: 00:06:0: chip 1013,6003 card 1013,4280 rev 01 class > 04,01,00 hdr 00 > (II) PCI: 00:0b:0: chip 10b7,9055 card 10b7,9055 rev 30 class > 02,00,00 hdr 00 > (II) PCI: 01:00:0: chip 102b,0521 card 102b,ff00 rev 03 class > 03,00,00 hdr 00 > (II) PCI: End of PCI scan > (II) Host-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is > set) (II) Bus 0 I/O range: > [0] -1 0 0x - 0x (0x1) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0 0x - 0x (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0 0x - 0x (0x0) MX[B] > (II) PCI-to-PCI bridge: > (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x008c (VGA_EN is > set) (II) Bus 1 non-prefetchable memory range: > [0] -1 0 0xf420 - 0xf4ff (0xe0) MX[B] > (II) Bus 1 prefetchable memory range: > [0] -1 0 0xf500 - 0xf5ff (0x100) MX[B] > (II) PCI-to-ISA bridge: > (II) Bus -1: bridge is at (0:4:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN > is set) (--) PCI:*(1:0:0) Matrox Graphics, Inc. MGA G200 AGP re
