Re: Failed to read CSW: USB_ERR_STALLED
On Saturday 02 March 2013 09:54:02 Krzysztof Parzyszek wrote: Here's the beginning of dmesg: Copyright (c) 1992-2013 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 9.1-STABLE #6 r247608: Fri Mar 1 21:27:49 CST 2013 root@apple5:/usr/obj/usr/src/sys/APPLE5 powerpc cpu0: IBM PowerPC 970MP revision 1.1, 2500.32 MHz cpu0: Features dc00PPC32,PPC64,ALTIVEC,FPU,MMU cpu0: HID0 1511081DEEPNAP,NAP,DPM,NHR,TBEN,ENATTN real memory = 17159626752 (16364 MB) avail memory = 16319057920 (15563 MB) FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs cpu0: dev=ff89d680 (BSP) cpu1: dev=ff89eb70 cpu2: dev=ff89f248 cpu3: dev=ff89f920 kbd0 at kbdmux0 nexus0: Open Firmware Nexus device cpulist0: Open Firmware CPU Group on nexus0 cpu0: Open Firmware CPU on cpulist0 pcr0: PPC 970 Power Control Register on cpu0 cpu1: Open Firmware CPU on cpulist0 pcr1: PPC 970 Power Control Register on cpu1 cpu2: Open Firmware CPU on cpulist0 pcr2: PPC 970 Power Control Register on cpu2 cpu3: Open Firmware CPU on cpulist0 pcr3: PPC 970 Power Control Register on cpu3 powermac_nvram0: Apple NVRAM on nexus0 powermac_nvram0: bank0 generation 736, bank1 generation 737 unin0: Apple UniNorth System Controller on nexus0 unin0: Version 66 iichb0: Keywest I2C controller mem 0xf8001000-0xf8001fff irq 0 on unin0 iicbus0: OFW I2C bus on iichb0 iicbus0: unknown card at addr 0x94 iicbus0: unknown card at addr 0x96 iicbus0: unknown card at addr 0x98 iicbus0: unknown card at addr 0x9c htpic0: OpenPIC Interrupt Controller mem 0xf804-0xf807 on unin0 pcib0: IBM CPC945 PCI Express Root on nexus0 pci0: OFW PCI bus on pcib0 pcib1: IBM CPC9X5 HyperTransport Tunnel on nexus0 pcib1: 86 HT IRQs on device 7.0 pci1: OFW PCI bus on pcib1 pcib1: Enabling MSI window for HyperTransport slave at pci1:0:1:0 pcib2: OFW PCI-PCI bridge at device 1.0 on pci1 pci2: OFW PCI bus on pcib2 pcib3: OFW PCI-PCI bridge at device 2.0 on pci1 pci3: OFW PCI bus on pcib3 bge0: Broadcom BCM5714 B3, ASIC rev. 0x008003 mem 0xfa53-0xfa53,0xfa52-0xfa52 irq 66 at device 4.0 on pci3 bge0: CHIP ID 0x8003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz miibus0: MII bus on bge0 brgphy0: BCM5780 1000BASE-T media interface PHY 1 on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge0: Ethernet address: 00:16:cb:37:e2:e0 bge1: Broadcom BCM5714 B3, ASIC rev. 0x008003 mem 0xfa51-0xfa51,0xfa50-0xfa50 irq 67 at device 4.1 on pci3 bge1: CHIP ID 0x8003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz miibus1: MII bus on bge1 brgphy1: BCM5780 1000BASE-T media interface PHY 1 on miibus1 brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow bge1: Ethernet address: 00:16:cb:37:e2:e1 pcib4: OFW PCI-PCI bridge at device 3.0 on pci1 pci4: OFW PCI bus on pcib4 pcib5: OFW PCI-PCI bridge at device 4.0 on pci1 pci5: OFW PCI bus on pcib5 pcib6: OFW PCI-PCI bridge at device 5.0 on pci1 pci6: OFW PCI bus on pcib6 vgapci0: VGA-compatible display mem 0x8200-0x82ff,0x8800-0x8fff,0x8100-0x81ff irq 63 at device 0.0 on pci6 pcib7: OFW PCI-PCI bridge at device 6.0 on pci1 pci7: OFW PCI bus on pcib7 pcib8: OFW PCI-PCI bridge at device 7.0 on pci1 pci8: OFW PCI bus on pcib8 gem0: Apple Shasta GMAC Ethernet mem 0xfa20-0xfa3f at device 15.0 on pci8 gem0: failed to allocate resources device_attach: gem0 attach returned 6 pcib9: OFW PCI-PCI bridge at device 8.0 on pci1 pci9: OFW PCI bus on pcib9 macio0: Shasta I/O Controller mem 0x8000-0x8007 at device 7.0 on pci9 macgpio0: MacIO GPIO Controller mem 0x50-0x8a on macio0 scc0: Zilog Z8530 dual channel SCC mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 23,17,18,24,19,20 on macio0 uart0: z8530, channel A on scc0 uart1: z8530, channel B on scc0 iichb1: Keywest I2C controller mem 0x18000-0x18fff irq 27 on macio0 iicbus1: OFW I2C bus on iichb1 iicbus1: unknown card at addr 0x8c iicbus1: unknown card at addr 0x24 ohci0: NEC uPD 9210 USB controller mem 0x80082000-0x80082fff irq 70 at device 11.0 on pci9 usbus0 on ohci0 ohci1: NEC uPD 9210 USB controller mem 0x80081000-0x80081fff irq 70 at device 11.1 on pci9 usbus1 on ohci1 ehci0: NEC uPD 720100 USB 2.0 controller mem 0x8008-0x800800ff irq 70 at device 11.2 on pci9 usbus2: EHCI version 1.0 usbus2 on ehci0 pcib10: OFW PCI-PCI bridge at device 9.0 on pci1 pci10: OFW PCI bus on pcib10 atapci0: ServerWorks K2 SATA150 controller mem 0xfa402000-0xfa403fff irq 10 at device 12.0 on pci10 pcib1: failed to reserve resource for pcib10 atapci0: 0x10 bytes of
Current problem reports assigned to freebsd-usb@FreeBSD.org
Note: to view an individual PR, use: http://www.freebsd.org/cgi/query-pr.cgi?pr=(number). The following is a listing of current problems submitted by FreeBSD users. These represent problem reports covering all versions including experimental development code and obsolete releases. S Tracker Resp. Description o usb/176417 usb[xhci][cam][umass] kernelpanic while removing plugged o usb/175731 usbdetaching USB keyboard freezes other USB keyboards o usb/175639 usbnot detect usb netcard D-LINK DUB-E100 rev C1 o usb/175599 usb[usbdevs][patch]Liebert UPS PSI1000 being assigned uhi o usb/175551 usbSeagate 2TB USB extern hard disk have errors with Free o usb/175454 usbupdate usbdevs and usb_quirk.c for SanDisk SDDR-289 o usb/175379 usbusb card-reader problem o usb/175302 usbdon't mount virtual driver CD for my phone o usb/174963 usbbuffalo wli-uc-gn wireless card sometimes unusable and o usb/174835 usbuaudio fails to create pcm/dsp device file o usb/174814 usb[PATCH] support for MiFi 2200 o usb/174695 usbusb keeps disconnecting mouse or keyboard o usb/174575 usbInterrupt storm error on startup o usb/174464 usbclone MAC address(es) on usb networks cdce(4) ue[0- o usb/174254 usbMIDI keyboard not recognised o usb/173722 usb[xhci] xhci driver bug after suspend to RAM (ACPI S3 m o usb/173616 usbLG USB DVD-RW USB STALL o usb/173182 usbusbus appears as a network device o usb/172937 usbFreeBSD 9.1-RC2 usb3 port disconnects o usb/172633 usbSony Cybershot not recognized as USB mem stick o usb/172199 usb[xhci] high interrupts load xhci o usb/171354 usb[umass] Medium not present error on flash drive [regre o usb/171262 usbplug in sdhc via usb reader reboots machine o usb/171197 usbADATA Classic CH11 USB HDD doesn't work in FreeBSD 9.1 o usb/170699 usbFreeBSD 9.0 Doesn't list HDD or its partitions in part o usb/170688 usbpatch][usbdevs][wlan] Patch for ASUS Black Diamond USB o usb/170606 usbr239222 kernel panic at boot - usb locking issue o usb/170358 usb[ums] Wrong (duplicate) button numbers o usb/170123 usb[umass] HP v210w USB stick not supported o usb/169935 usb[keyboard] Unable use USB keyboard while panic o usb/169789 usb[u3g] [patch] add support for huawei e3131 o usb/169461 usb[ugen] USB2 high-speed device detected as full speed o usb/169428 usb[ugen] ugen not detecting all endpoints on device [reg o usb/168551 usb[umass] Issues with embedded card reader (Laptop ASUS o usb/168132 usb[umass] MATSHITA memory card size reported wrong, moun o usb/167847 usb[ural] dlink dwl-122g e crashes(?) when trying wap2 cr o usb/167001 usb[USB] [PATCH] add support for Smart G2 64MB memory key o usb/165815 usb[usbdevs] [patch] add k3772z 3g modem support o usb/165163 usb[keyboard] The USB RF keyboard and mouse become non-re o usb/164058 usb[umass] Lexar 8GB USB flash drive doesn't work by defa f usb/163328 usb[usb] Support for Atheros USB abgn devices o kern/163091 usb[panic] Fatal trap 12: page fault while in kernel mode f usb/162306 usbusb devices cant get address asignation, no memories, o usb/162054 usbusbdump just hangs on 9.0-RC1 f usb/161793 usbpoor EHCI usb2 i/o performance o usb/160436 usbucom wedges machine on parity error ? o usb/160299 usbMicroSDHC-to-USB adapters do not work in FreeBSD 8.x o usb/160192 usb[install] Installation from USB-Stick doesn't find the o usb/159274 usbUSB 3.0 Etron EJ168A does not work. f usb/159191 usb[fusefs-ntfs] write on fusefs-ntfs mounted partition r o usb/157376 usbLaCie USB disk not recognized o usb/157074 usb[boot] [usb8] vfs_mountroot_ask is called when no usb o usb/156898 usb[keyboard] usb keyboard does not work while boot (ps2 f usb/156735 usbNeed Quirk for Goflex USB Disk Drives o usb/156726 usb[snd_uaudio]: snd_uaudio(4) fails to detach when mixer o usb/156725 usbUSB stack stall cause complete system input loss o usb/156596 usb[ehci] Extremely high interrupt rate on ehci/uhci IRQ1 o usb/156000 usbrum(4) Fatal trap 18: integer divide fault while in ke f usb/155996 usbNanoBSD not booted as Disk o usb/155784 usbProblem with Transcend StoreJet 25M3 (2AJ1) on Asus M2 o usb/155663 usb[usbdevs] [patch] Add support for Supertop Nano 1GB US o usb/154753 usb[usbdevs] [patch] Support for Qualcomm USB modem/stora o usb/154506 usb[umass] Copying dir with large files makes FreeBSD loa
Re: Failed to read CSW: USB_ERR_STALLED
On 3/4/2013 2:20 AM, Hans Petter Selasky wrote: Looks like your device is not complying to SCSI standards?? Try this: usbconfig -d X.Y add_quirk UQ_MSC_NO_INQUIRY Replug your device. Thanks. I will try it tonight. The device is a Mediasonic 4-bay enclosure (which apparently do have buggy USB3 implementation). What is surprising to me is that this combination (i.e. this device with USB2) worked before, and now it doesn't. I've found some other threads related to similar umass issues, and in one of them someone described a case of a memory stick which worked with FreeBSD, but after being used with Linux or Windows, it would no longer work with the same FreeBSD machine. Do devices retain some sort of modifiable configuration data even after power-off? -Krzysztof ___ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to freebsd-usb-unsubscr...@freebsd.org
Re: Failed to read CSW: USB_ERR_STALLED
On 03/04/13 16:46, Krzysztof Parzyszek wrote: On 3/4/2013 2:20 AM, Hans Petter Selasky wrote: Looks like your device is not complying to SCSI standards?? Try this: usbconfig -d X.Y add_quirk UQ_MSC_NO_INQUIRY Replug your device. Thanks. I will try it tonight. The device is a Mediasonic 4-bay enclosure (which apparently do have buggy USB3 implementation). What is surprising to me is that this combination (i.e. this device with USB2) worked before, and now it doesn't. I've found some other threads related to similar umass issues, and in one of them someone described a case of a memory stick which worked with FreeBSD, but after being used with Linux or Windows, it would no longer work with the same FreeBSD machine. Do devices retain some sort of modifiable configuration data even after power-off? -Krzysztof Hi, Maybe you could reproduce that connecting your device through a so-called USB analyzer. Beagle sell cheap ones. If the device behaves differently when connected to for example FreeBSD after being plugged into another OS, would be interesting to know. It is up to the manufacturer what they allow or not. Some flash sticks contain reprogrammable parts others do not. --HPS ___ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to freebsd-usb-unsubscr...@freebsd.org
