usb/188403: USB3 USB_ERR_TIMEOUT and USB_ERR_STALLED issues
Number: 188403 Category: usb Synopsis: USB3 USB_ERR_TIMEOUT and USB_ERR_STALLED issues Confidential: no Severity: non-critical Priority: low Responsible:freebsd-usb State: open Quarter: Keywords: Date-Required: Class: sw-bug Submitter-Id: current-users Arrival-Date: Wed Apr 09 15:40:00 UTC 2014 Closed-Date: Last-Modified: Originator: Jason Seidel Release:Freebsd 10 release/stable and 11.0-current Organization: Environment: I have tried this with all current FreeBSD 10 versions. FreeBSD nuc 11.0-CURRENT FreeBSD 11.0-CURRENT #1 r264292: Wed Apr 9 10:14:56 EDT 2014 jseidel@nuc:/usr/obj/usr/src/sys/GENERIC i386 Description: I have an intel NUC D34010WYKH, and there is an issue with the USB3 in release 10 and 11. I was running freebsd 10 release and saw this issuebut i needed to upgrade to stable because release didnt contain the axge driver for a usb network adapter. after updating to stable, the driver was available but the usb errors were still there. I saw some messages about issues like this and that a fix was uploaded, so I went to current to see if it fixed the problem, but the issue was still there. usb_alloc_device: set address 5 failed (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED Root mount waiting for: usbus1 usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED Root mount waiting for: usbus1 Root mount waiting for: usbus1 usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED Root mount waiting for: usbus1 usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED Root mount waiting for: usbus1 Root mount waiting for: usbus1 usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED $ pciconf -lv hostb0@pci0:0:0:0: class=0x06 card=0x20548086 chip=0x0a048086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' device = 'Haswell-ULT DRAM Controller' class = bridge subclass = HOST-PCI vgapci0@pci0:0:2:0: class=0x03 card=0x20548086 chip=0x0a268086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' device = 'Haswell-ULT Integrated Graphics Controller' class = display subclass = VGA hdac0@pci0:0:3:0: class=0x040300 card=0x20548086 chip=0x0a0c8086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' class = multimedia subclass = HDA xhci0@pci0:0:20:0: class=0x0c0330 card=0x20548086 chip=0x9c318086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = 'Lynx Point-LP USB xHCI HC' class = serial bus subclass = USB none0@pci0:0:22:0: class=0x078000 card=0x20548086 chip=0x9c3a8086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = 'Lynx Point-LP HECI' class = simple comms em0@pci0:0:25:0:class=0x02 card=0x20548086 chip=0x15598086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' class = network subclass = ethernet hdac1@pci0:0:27:0: class=0x040300 card=0x20548086 chip=0x9c208086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = 'Lynx Point-LP HD Audio Controller' class = multimedia subclass = HDA pcib1@pci0:0:28:0: class=0x060400 card=0x20548086 chip=0x9c108086 rev=0xe4 hdr=0x01 vendor = 'Intel Corporation' device = 'Lynx Point-LP PCI Express Root Port 1' class = bridge subclass = PCI-PCI pcib2@pci0:0:28:3: class=0x060400 card=0x20548086 chip=0x9c168086 rev=0xe4 hdr=0x01 vendor = 'Intel Corporation' device = 'Lynx Point-LP PCI Express Root Port 4' class = bridge subclass = PCI-PCI ehci0@pci0:0:29:0: class=0x0c0320 card=0x20548086 chip=0x9c268086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = 'Lynx Point-LP USB EHCI' class = serial bus subclass = USB isab0@pci0:0:31:0: class=0x060100 card=0x20548086 chip=0x9c438086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = 'Lynx Point-LP LPC Controller' class = bridge subclass = PCI-ISA ahci0@pci0:0:31:2: class=0x010601 card=0x20548086 chip=0x9c038086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = 'Lynx Point-LP SATA Controller 1 [AHCI mode]' class = mass storage subclass = SATA none1@pci0:0:31:3: class=0x0c0500 card=0x20548086 chip=0x9c228086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = 'Lynx Point-LP
Re: usb/188403: USB3 USB_ERR_TIMEOUT and USB_ERR_STALLED issues
The following reply was made to PR usb/188403; it has been noted by GNATS. From: Jason Seidel jsei...@unixsystem.org To: bug-follo...@freebsd.org Cc: Subject: Re: usb/188403: USB3 USB_ERR_TIMEOUT and USB_ERR_STALLED issues Date: Wed, 9 Apr 2014 11:06:06 -0600 One typo, my NUC is D54250WYKH. ___ freebsd-usb@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-usb To unsubscribe, send any mail to freebsd-usb-unsubscr...@freebsd.org
Re: usb/188403: USB3 USB_ERR_TIMEOUT and USB_ERR_STALLED issues
The following reply was made to PR usb/188403; it has been noted by GNATS. From: Hans Petter Selasky h...@selasky.org To: Jason Seidel jsei...@unixsystem.org, freebsd-gnats-sub...@freebsd.org Cc: Subject: Re: usb/188403: USB3 USB_ERR_TIMEOUT and USB_ERR_STALLED issues Date: Wed, 09 Apr 2014 22:30:15 +0200 On 04/09/14 17:39, Jason Seidel wrote: Number: 188403 Category: usb Synopsis: USB3 USB_ERR_TIMEOUT and USB_ERR_STALLED issues Confidential: no Severity: non-critical Priority: low Responsible:freebsd-usb State: open Quarter: Keywords: Date-Required: Class: sw-bug Submitter-Id: current-users Arrival-Date: Wed Apr 09 15:40:00 UTC 2014 Closed-Date: Last-Modified: Originator: Jason Seidel Release:Freebsd 10 release/stable and 11.0-current Organization: Environment: I have tried this with all current FreeBSD 10 versions. FreeBSD nuc 11.0-CURRENT FreeBSD 11.0-CURRENT #1 r264292: Wed Apr 9 10:14:56 EDT 2014 jseidel@nuc:/usr/obj/usr/src/sys/GENERIC i386 Description: I have an intel NUC D34010WYKH, and there is an issue with the USB3 in release 10 and 11. I was running freebsd 10 release and saw this issuebut i needed to upgrade to stable because release didnt contain the axge driver for a usb network adapter. after updating to stable, the driver was available but the usb errors were still there. I saw some messages about issues like this and that a fix was uploaded, so I went to current to see if it fixed the problem, but the issue was still there. usb_alloc_device: set address 5 failed (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED Root mount waiting for: usbus1 usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED Root mount waiting for: usbus1 Root mount waiting for: usbus1 usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED Root mount waiting for: usbus1 usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED Root mount waiting for: usbus1 Root mount waiting for: usbus1 usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED $ pciconf -lv hostb0@pci0:0:0:0: class=0x06 card=0x20548086 chip=0x0a048086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' device = 'Haswell-ULT DRAM Controller' class = bridge subclass = HOST-PCI vgapci0@pci0:0:2:0: class=0x03 card=0x20548086 chip=0x0a268086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' device = 'Haswell-ULT Integrated Graphics Controller' class = display subclass = VGA hdac0@pci0:0:3:0: class=0x040300 card=0x20548086 chip=0x0a0c8086 rev=0x09 hdr=0x00 vendor = 'Intel Corporation' class = multimedia subclass = HDA xhci0@pci0:0:20:0: class=0x0c0330 card=0x20548086 chip=0x9c318086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = 'Lynx Point-LP USB xHCI HC' class = serial bus subclass = USB none0@pci0:0:22:0: class=0x078000 card=0x20548086 chip=0x9c3a8086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = 'Lynx Point-LP HECI' class = simple comms em0@pci0:0:25:0:class=0x02 card=0x20548086 chip=0x15598086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' class = network subclass = ethernet hdac1@pci0:0:27:0: class=0x040300 card=0x20548086 chip=0x9c208086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = 'Lynx Point-LP HD Audio Controller' class = multimedia subclass = HDA pcib1@pci0:0:28:0: class=0x060400 card=0x20548086 chip=0x9c108086 rev=0xe4 hdr=0x01 vendor = 'Intel Corporation' device = 'Lynx Point-LP PCI Express Root Port 1' class = bridge subclass = PCI-PCI pcib2@pci0:0:28:3: class=0x060400 card=0x20548086 chip=0x9c168086 rev=0xe4 hdr=0x01 vendor = 'Intel Corporation' device = 'Lynx Point-LP PCI Express Root Port 4' class = bridge subclass = PCI-PCI ehci0@pci0:0:29:0: class=0x0c0320 card=0x20548086 chip=0x9c268086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = 'Lynx Point-LP USB EHCI' class = serial bus subclass = USB isab0@pci0:0:31:0
Re: usb/188403: USB3 USB_ERR_TIMEOUT and USB_ERR_STALLED issues
The following reply was made to PR usb/188403; it has been noted by GNATS. From: Jason Seidel jsei...@unixsystem.org To: Hans Petter Selasky h...@selasky.org, freebsd-gnats-sub...@freebsd.org Cc: Subject: Re: usb/188403: USB3 USB_ERR_TIMEOUT and USB_ERR_STALLED issues Date: Wed, 9 Apr 2014 16:08:34 -0600 Just as an FYI, I'm running freebsd 10 stable again the amd64 version. I tried the patch and removed the entry from the loader.conf; but I still get errors with the patch. Repeats over and over again. xhci0: Resetting controller usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_TIMEOUT usbd_req_re_enumerate: addr=3, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_TIMEOUT ugen0.3: Unknown at usbus0 (disconnected) uhub_reattach_port: could not allocate new device uhub1: at usbus0, port 1, addr 1 (disconnected) ugen0.2: Logitech at usbus0 (disconnected) ukbd0: at uhub1, port 4, addr 1 (disconnected) ums0: at uhub1, port 4, addr 1 (disconnected) uhid0: at uhub1, port 4, addr 1 (disconnected) xhci0: 32 byte context size. xhci0: Port routing mask set to 0x uhub1: 0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1 on usbus0 uhub1: 13 ports with 13 removable, self powered ugen0.2: Logitech at usbus0 ukbd0: Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 1 on usbus0 kbd0 at ukbd0 ums0: Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 1 on usbus0 ums0: 16 buttons and [XYZT] coordinates ID=2 uhid0: Logitech USB Receiver, class 0/0, rev 2.00/12.01, addr 1 on usbus0 xhci0: Resetting controller usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_TIMEOUT -- Original Message --- From:Hans Petter Selasky h...@selasky.org To:Jason Seidel jsei...@unixsystem.org, freebsd-gnats-sub...@freebsd.org Sent:Wed, 09 Apr 2014 22:30:15 +0200 Subject:Re: usb/188403: USB3 USB_ERR_TIMEOUT and USB_ERR_STALLED issues On 04/09/14 17:39, Jason Seidel wrote: Number: 188403 Category: usb Synopsis: USB3 USB_ERR_TIMEOUT and USB_ERR_STALLED issues Confidential: no Severity: non-critical Priority: low Responsible:freebsd-usb State: open Quarter: Keywords: Date-Required: Class: sw-bug Submitter-Id: current-users Arrival-Date: Wed Apr 09 15:40:00 UTC 2014 Closed-Date: Last-Modified: Originator: Jason Seidel Release:Freebsd 10 release/stable and 11.0-current Organization: Environment: I have tried this with all current FreeBSD 10 versions. FreeBSD nuc 11.0-CURRENT FreeBSD 11.0-CURRENT #1 r264292: Wed Apr 9 10:14:56 EDT 2014 jseidel@nuc:/usr/obj/usr/src/sys/GENERIC i386 Description: I have an intel NUC D34010WYKH, and there is an issue with the USB3 in release 10 and 11. I was running freebsd 10 release and saw this issuebut i needed to upgrade to stable because release didnt contain the axge driver for a usb network adapter. after updating to stable, the driver was available but the usb errors were still there. I saw some messages about issues like this and that a fix was uploaded, so I went to current to see if it fixed the problem, but the issue was still there. usb_alloc_device: set address 5 failed (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED Root mount waiting for: usbus1 usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED Root mount waiting for: usbus1 Root mount waiting for: usbus1 usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED Root mount waiting for: usbus1 usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device descriptor at addr 5 failed, USB_ERR_STALLED Root mount waiting for: usbus1 Root mount waiting for: usbus1 usbd_req_re_enumerate: addr=5, set address failed! (USB_ERR_TIMEOUT, ignored) usbd_setup_device_desc: getting device
