On 09/15/14 17:16, CeDeROM wrote:
Hello world! :-)
I have changed my machine, there is a built-in GOBI2000 / HP UN2420
3G/GPS module installable as MiniPCI card and visible as USB device. I
have added its VID/PID to the usbdevs and u3g.c module, so after
recompilation it gets recognised by u3g module and apropriate
/dev/cuaU* device shows up..
The problem is that device does not store firmware inside non-volatile
memory, so user needs to upload it after power-on. I have the firmware
files. I can test modem with success after reboot from Win7 which
uploads firmware into device. Still, I need to upload the firmware
somehow on my FreeBSD.
The upload protocol is QDL and /dev/cuaU0 shows up waiting for
command. Which utility can I use to upload firmware with QDL? I have
seen one post [1] regarding this problem in the past but the QDL
utility was not named explicitly.
Any hints welcome! :-)
Tomek
[1] http://lists.freebsd.org/pipermail/freebsd-usb/2010-October/009384.html
Hi,
Maybe you can use some tools to sniff the USB protocol under the other
operating system. The protocol is probably not too complicated, and just
replay the traffic.
--HPS
___
freebsd-usb@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-usb
To unsubscribe, send any mail to freebsd-usb-unsubscr...@freebsd.org
