Re: bhyve: can't to passthru bge(4) card
21.01.2014 8:56, Neel Natu пишет: I suspect that this is because the function number of the virtual PCI device and the physical PCI device are different. Could you try to use the following instead: -s 2:1,passthru,3/0/1 Thank you. It works. I've tried 3:1,passthru,3/0/1 but it does not work. What rules for a slot number to choose? Alternatively you could try assigning the physical PCI device 3/0/0: -s 3:0,passthru,3/0/0 3/0/0 is a first network card. I'd like to leave it for the host system. ___ freebsd-virtualization@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-virtualization To unsubscribe, send any mail to freebsd-virtualization-unsubscr...@freebsd.org
Re: bhyve: can't to passthru bge(4) card
Hi Sergey, On Jan 21, 2014, at 1:27 AM, Sergey Matveychuk s...@semmy.ru wrote: 21.01.2014 8:56, Neel Natu пишет: I suspect that this is because the function number of the virtual PCI device and the physical PCI device are different. Could you try to use the following instead: -s 2:1,passthru,3/0/1 Thank you. It works. I've tried 3:1,passthru,3/0/1 but it does not work. What rules for a slot number to choose? It depends on the PCI function that you are passing to the guest. For some, e.g. Intel e1000, it does not matter. You can have it appear on a completely different function number in the guest as compared to the host. For others, e.g. bge, as you discovered, the function numbers in the guest and host have to match. Also, PCI requires that for a multi-function device, function 0 must be present. So, it is not possible to assign a device to a function 0 without also having some device present at function 0. Hope that helps. Best Neel Alternatively you could try assigning the physical PCI device 3/0/0: -s 3:0,passthru,3/0/0 3/0/0 is a first network card. I'd like to leave it for the host system. ___ freebsd-virtualization@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-virtualization To unsubscribe, send any mail to freebsd-virtualization-unsubscr...@freebsd.org
bhyve: can't to passthru bge(4) card
Hi.
I try to passthru bge:
% pciconf -vl
...
ppt0@pci0:3:0:1:class=0x02 card=0x169d103c chip=0x165714e4
rev=0x01 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme BCM5719 Gigabit Ethernet PCIe'
class = network
subclass = ethernet
...
% cat /boot/loader.conf
vmm_load=yes
pptdevs=3/0/1
% bhyve -c ${VM_CPUNUM} -m ${VM_MEMSIZE} -AI -HP -g0 \
-s 0:0,hostbridge \
-s 3:0,passthru,3/0/1 \
-s 2:0,virtio-blk,${VM_DISK} \
-S 31,uart,${VM_CONSOLE} \
${VM_NAME}
And I got this on boot:
bge0: Broadcom unknown BCM5719, ASIC rev. 0x5719001 mem
0xc001-0xc001,0xc002-0xc002,0xc003-0xc003 irq 36
at device 3.0 on pci0
bge0: APE FW version: NCSI v1.0.60.0
bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
bge0: Try again
bge0: Try again
bge0: Try again
bge0: Try again
bge0: attaching PHYs failed
device_attach: bge0 attach returned 6
I used this as an instruction: https://wiki.freebsd.org/bhyve/pci_passthru
___
freebsd-virtualization@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
To unsubscribe, send any mail to
freebsd-virtualization-unsubscr...@freebsd.org
Fwd: bhyve: can't to passthru bge(4) card
-- Forwarded message --
From: Aryeh Friedman aryeh.fried...@gmail.com
Date: Mon, Jan 20, 2014 at 3:01 PM
Subject: Re: bhyve: can't to passthru bge(4) card
To: Sergey Matveychuk s...@semmy.ru
A question if you make the NIC the bridge device in PetiteCloud (we will
have physical NIC support in the next few tertiary versions but for now
your stuck with something like the manual version above) does it work any
better I suspect you have the networking set up wrong before calling
bhyve
On Mon, Jan 20, 2014 at 2:43 PM, Sergey Matveychuk s...@semmy.ru wrote:
Hi.
I try to passthru bge:
% pciconf -vl
...
ppt0@pci0:3:0:1:class=0x02 card=0x169d103c chip=0x165714e4
rev=0x01 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme BCM5719 Gigabit Ethernet PCIe'
class = network
subclass = ethernet
...
% cat /boot/loader.conf
vmm_load=yes
pptdevs=3/0/1
% bhyve -c ${VM_CPUNUM} -m ${VM_MEMSIZE} -AI -HP -g0 \
-s 0:0,hostbridge \
-s 3:0,passthru,3/0/1 \
-s 2:0,virtio-blk,${VM_DISK} \
-S 31,uart,${VM_CONSOLE} \
${VM_NAME}
And I got this on boot:
bge0: Broadcom unknown BCM5719, ASIC rev. 0x5719001 mem
0xc001-0xc001,0xc002-0xc002,0xc003-0xc003 irq 36
at device 3.0 on pci0
bge0: APE FW version: NCSI v1.0.60.0
bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
bge0: Try again
bge0: Try again
bge0: Try again
bge0: Try again
bge0: attaching PHYs failed
device_attach: bge0 attach returned 6
I used this as an instruction: https://wiki.freebsd.org/bhyve/pci_passthru
___
freebsd-virtualization@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
To unsubscribe, send any mail to freebsd-virtualization-
unsubscr...@freebsd.org
--
Aryeh M. Friedman, Lead Developer, http://www.PetiteCloud.org
--
Aryeh M. Friedman, Lead Developer, http://www.PetiteCloud.org
___
freebsd-virtualization@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
To unsubscribe, send any mail to
freebsd-virtualization-unsubscr...@freebsd.org
Re: bhyve: can't to passthru bge(4) card
Hi Sergey,
On Mon, Jan 20, 2014 at 11:43 AM, Sergey Matveychuk s...@semmy.ru wrote:
Hi.
I try to passthru bge:
% pciconf -vl
...
ppt0@pci0:3:0:1:class=0x02 card=0x169d103c chip=0x165714e4
rev=0x01 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme BCM5719 Gigabit Ethernet PCIe'
class = network
subclass = ethernet
...
% cat /boot/loader.conf
vmm_load=yes
pptdevs=3/0/1
% bhyve -c ${VM_CPUNUM} -m ${VM_MEMSIZE} -AI -HP -g0 \
-s 0:0,hostbridge \
-s 3:0,passthru,3/0/1 \
-s 2:0,virtio-blk,${VM_DISK} \
-S 31,uart,${VM_CONSOLE} \
${VM_NAME}
I suspect that this is because the function number of the virtual PCI
device and the physical PCI device are different.
Could you try to use the following instead: -s 2:1,passthru,3/0/1
Alternatively you could try assigning the physical PCI device 3/0/0:
-s 3:0,passthru,3/0/0
best
Neel
And I got this on boot:
bge0: Broadcom unknown BCM5719, ASIC rev. 0x5719001 mem
0xc001-0xc001,0xc002-0xc002,0xc003-0xc003 irq 36 at
device 3.0 on pci0
bge0: APE FW version: NCSI v1.0.60.0
bge0: CHIP ID 0x05719001; ASIC REV 0x5719; CHIP REV 0x57190; PCI-E
bge0: Try again
bge0: Try again
bge0: Try again
bge0: Try again
bge0: attaching PHYs failed
device_attach: bge0 attach returned 6
I used this as an instruction: https://wiki.freebsd.org/bhyve/pci_passthru
___
freebsd-virtualization@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
To unsubscribe, send any mail to
freebsd-virtualization-unsubscr...@freebsd.org
___
freebsd-virtualization@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-virtualization
To unsubscribe, send any mail to
freebsd-virtualization-unsubscr...@freebsd.org
