Re: Atheros 9565 wifi problems
Well does it work manually on head? I'd like to make sure there are no problems there. On Dec 7, 2013 7:36 PM, "Peter Edson" wrote: > Hey, I went ahead and reinstalled 10 beta 4 and it does not work > automatically, but running the commands manually does work -- even rebooted > and it is still working. > > So that is awesome, just hope it keeps working. I still need to install > xorg/i3 like before but I'll assume it's gonna stay working since those > shouldn't have much to do with it working but I am trying to follow the > steps I did last time to pinpoint any errors. > > I'll let you know if I run in to any problems thanks so much for the > support. > > > On Sat, Dec 7, 2013 at 5:52 PM, Peter Edson wrote: > >> It's actually a really nice laptop for what I paid for it in my opinion >> :-) I bought it from the microsoft store of all places on black friday for >> like half off! lol. >> >> >> it's a gateway (acer) nv570p10u >> >> has an i5 ivy bridge 3337U >> >> 15.6" screen b/g/n wifi (as you know) >> Touch screen i'll probably never use. >> >> Not bad for 329$ >> >> replaced the hdd with an ssd of course. >> >> >> Anyway I gotta study for a big anatomy test for the rest of the weekend >> but monday or tuesday i'll reinstall and i'll email you and let you know if >> it works after a reboot. >> >> I figure i'll get the wifi up and running again like I did the first >> time. Reboot, make sure it works. >> >> Install xorg/i3wm like I did reboot again and hope it works heh. >> >> >> >> >> >> >> >> On Sat, Dec 7, 2013 at 5:46 PM, Adrian Chadd wrote: >> >>> Try 10.0b4 and run with it again. It may have been a fluke. Which laptop >>> is it? It could be some cut price version I need driver hacks for :( >>> >>> Adrian >>> On Dec 7, 2013 2:45 PM, "Peter Edson" wrote: >>> it worked on 10 beta 4. Was autodetected during the USB install process. I used wpa supplicant to configure it and it worked fine until I rebooted, then it just stopped working for apparently no reason (you'd know a hell of a lot better than I would) It was not detected in 9.2, which is why I installed 10 beta 4 On Sat, Dec 7, 2013 at 5:42 PM, Adrian Chadd wrote: > Huh? 10.0 works fine on the 9565? Ive not changed anything in the ath > driver since then. > > Adrian > On Dec 7, 2013 2:14 PM, "Peter Edson" wrote: > >> when I do the destroy, it says it wasn't already configured. >> >> when I get to the supplicant part it says wpa_supplicant 1046 ioctl >> something something operation not supported. >> >> then it tried to associate for awhile and says >> ctrl-event-disconnected reason=3 local=1 >> >> and authentication timed out >> >> I get ath0_edma_recv_tasklet: sc_interest_cnt > 0; skipping on the >> screen printed out alot. >> >> >> Anyway thanks for the help I guess I should just reinstall 10 beta 4 >> again since it was working? >> >> If this pops up again I guess i'll have to use windows for awhile :-( >> till this gets hammered out as my NIC and my wifi aren't working on >> freebsd >> at the moment, I guess this laptop is too new >> >> >> On Sat, Dec 7, 2013 at 12:47 PM, Adrian Chadd wrote: >> >>> It should be working. :( >>> >>> Try doing it all manually: >>> >>> * comment out wpa / ifconfig lines for wifi in /etc/rc.conf >>> >>> # ifconfig wlan0 destroy >>> # ifconfig wlan0 create wlandev ath0 >>> # wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf & >>> >>> .. see if that works. >>> >>> >>> >>> -a >>> >>> On 7 December 2013 02:10, Peter Edson wrote: >>> > here is my rc.conf /boot/loader.conf /etc/wpa_supplicant.conf and >>> all kernel >>> > output >>> > >>> > >>> > >>> > >>> > On Sat, Dec 7, 2013 at 1:22 AM, Adrian Chadd >>> wrote: >>> >> >>> >> What's logged in dmesg? >>> >> >>> >> >>> >> -a >>> >> >>> >> On 6 December 2013 20:56, Peter Edson >>> wrote: >>> >> > Hi, I installed freebsd 10 beta 4 today and it autodetected the >>> atheros >>> >> > 9565 chip and I got it setup no problem with wpa_supplicant. I >>> installed >>> >> > some stuff like xorg and i3 wm and then took a nap. I woke up >>> and >>> >> > rebooted >>> >> > the machine and it will not work on any wifi settings now. >>> >> > >>> >> > It keeps throwing errors about /var/run/wpa_supplicant failed to >>> >> > initialize >>> >> > control interface and remove the file, this is when I run >>> service netif >>> >> > restart, start etc. I have tried removing it and it doesn't >>> help. >>> >> > >>> >> > my pci conf for atheros looks like this: >>> >> > >>> >> > ath0@pci0:3:0:0: >>> >> > >>> >> > class = 0x028000 card=0x063211ad chip=0x0036168c rev=0x01 >>> hdr=0x00 >>> >>
Re: Atheros 9565 wifi problems
Try 10.0b4 and run with it again. It may have been a fluke. Which laptop is it? It could be some cut price version I need driver hacks for :( Adrian On Dec 7, 2013 2:45 PM, "Peter Edson" wrote: > it worked on 10 beta 4. Was autodetected during the USB install process. > > I used wpa supplicant to configure it and it worked fine until I rebooted, > then it just stopped working for apparently no reason (you'd know a hell of > a lot better than I would) > > It was not detected in 9.2, which is why I installed 10 beta 4 > > > On Sat, Dec 7, 2013 at 5:42 PM, Adrian Chadd wrote: > >> Huh? 10.0 works fine on the 9565? Ive not changed anything in the ath >> driver since then. >> >> Adrian >> On Dec 7, 2013 2:14 PM, "Peter Edson" wrote: >> >>> when I do the destroy, it says it wasn't already configured. >>> >>> when I get to the supplicant part it says wpa_supplicant 1046 ioctl >>> something something operation not supported. >>> >>> then it tried to associate for awhile and says ctrl-event-disconnected >>> reason=3 local=1 >>> >>> and authentication timed out >>> >>> I get ath0_edma_recv_tasklet: sc_interest_cnt > 0; skipping on the >>> screen printed out alot. >>> >>> >>> Anyway thanks for the help I guess I should just reinstall 10 beta 4 >>> again since it was working? >>> >>> If this pops up again I guess i'll have to use windows for awhile :-( >>> till this gets hammered out as my NIC and my wifi aren't working on freebsd >>> at the moment, I guess this laptop is too new >>> >>> >>> On Sat, Dec 7, 2013 at 12:47 PM, Adrian Chadd wrote: >>> It should be working. :( Try doing it all manually: * comment out wpa / ifconfig lines for wifi in /etc/rc.conf # ifconfig wlan0 destroy # ifconfig wlan0 create wlandev ath0 # wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf & .. see if that works. -a On 7 December 2013 02:10, Peter Edson wrote: > here is my rc.conf /boot/loader.conf /etc/wpa_supplicant.conf and all kernel > output > > > > > On Sat, Dec 7, 2013 at 1:22 AM, Adrian Chadd wrote: >> >> What's logged in dmesg? >> >> >> -a >> >> On 6 December 2013 20:56, Peter Edson wrote: >> > Hi, I installed freebsd 10 beta 4 today and it autodetected the atheros >> > 9565 chip and I got it setup no problem with wpa_supplicant. I installed >> > some stuff like xorg and i3 wm and then took a nap. I woke up and >> > rebooted >> > the machine and it will not work on any wifi settings now. >> > >> > It keeps throwing errors about /var/run/wpa_supplicant failed to >> > initialize >> > control interface and remove the file, this is when I run service netif >> > restart, start etc. I have tried removing it and it doesn't help. >> > >> > my pci conf for atheros looks like this: >> > >> > ath0@pci0:3:0:0: >> > >> > class = 0x028000 card=0x063211ad chip=0x0036168c rev=0x01 hdr=0x00 >> > >> > vendor= atheros communications >> > device= ar9565 wireless network adapter >> > class = network >> > ___ >> > freebsd-sta...@freebsd.org mailing list >> > http://lists.freebsd.org/mailman/listinfo/freebsd-stable >> > To unsubscribe, send any mail to >> > "freebsd-stable-unsubscr...@freebsd.org" > > >>> >>> > ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"
Re: Atheros 9565 wifi problems
Huh? 10.0 works fine on the 9565? Ive not changed anything in the ath driver since then. Adrian On Dec 7, 2013 2:14 PM, "Peter Edson" wrote: > when I do the destroy, it says it wasn't already configured. > > when I get to the supplicant part it says wpa_supplicant 1046 ioctl > something something operation not supported. > > then it tried to associate for awhile and says ctrl-event-disconnected > reason=3 local=1 > > and authentication timed out > > I get ath0_edma_recv_tasklet: sc_interest_cnt > 0; skipping on the screen > printed out alot. > > > Anyway thanks for the help I guess I should just reinstall 10 beta 4 again > since it was working? > > If this pops up again I guess i'll have to use windows for awhile :-( till > this gets hammered out as my NIC and my wifi aren't working on freebsd at > the moment, I guess this laptop is too new > > > On Sat, Dec 7, 2013 at 12:47 PM, Adrian Chadd wrote: > >> It should be working. :( >> >> Try doing it all manually: >> >> * comment out wpa / ifconfig lines for wifi in /etc/rc.conf >> >> # ifconfig wlan0 destroy >> # ifconfig wlan0 create wlandev ath0 >> # wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf & >> >> .. see if that works. >> >> >> >> -a >> >> On 7 December 2013 02:10, Peter Edson wrote: >> > here is my rc.conf /boot/loader.conf /etc/wpa_supplicant.conf and all >> kernel >> > output >> > >> > >> > >> > >> > On Sat, Dec 7, 2013 at 1:22 AM, Adrian Chadd >> wrote: >> >> >> >> What's logged in dmesg? >> >> >> >> >> >> -a >> >> >> >> On 6 December 2013 20:56, Peter Edson wrote: >> >> > Hi, I installed freebsd 10 beta 4 today and it autodetected the >> atheros >> >> > 9565 chip and I got it setup no problem with wpa_supplicant. I >> installed >> >> > some stuff like xorg and i3 wm and then took a nap. I woke up and >> >> > rebooted >> >> > the machine and it will not work on any wifi settings now. >> >> > >> >> > It keeps throwing errors about /var/run/wpa_supplicant failed to >> >> > initialize >> >> > control interface and remove the file, this is when I run service >> netif >> >> > restart, start etc. I have tried removing it and it doesn't help. >> >> > >> >> > my pci conf for atheros looks like this: >> >> > >> >> > ath0@pci0:3:0:0: >> >> > >> >> > class = 0x028000 card=0x063211ad chip=0x0036168c rev=0x01 hdr=0x00 >> >> > >> >> > vendor= atheros communications >> >> > device= ar9565 wireless network adapter >> >> > class = network >> >> > ___ >> >> > freebsd-sta...@freebsd.org mailing list >> >> > http://lists.freebsd.org/mailman/listinfo/freebsd-stable >> >> > To unsubscribe, send any mail to >> >> > "freebsd-stable-unsubscr...@freebsd.org" >> > >> > >> > > ___ freebsd-wireless@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-wireless To unsubscribe, send any mail to "freebsd-wireless-unsubscr...@freebsd.org"