oh, sorry
but that username could be authenticated)
mysql select * from radcheck;
++-+++--+
| id | username | attribute | op | value |
++-+++--+
| 11 | user |
Hi,
regarding Semulteneous-Use issue:
I use cisco NAS, usernames 'user'
ad_recv: Accounting-Request packet from host 10.169.33.11 port 1646, id=85,
length=323
Acct-Session-Id = 3306
Called-Station-Id = 0013.1a08.9340
Calling-Station-Id = 0013.e8f4.3f0d
Cisco-AVPair =
Hi,
I tried to compile FreeRADIUS with LDAP support however, rlm_ldap has
not been compiled.
Are libldap-2.4-2 libldap-dev not sufficent? Do I need to install OpenLDAP?
if you read the output of ./configure
eg
./confogure | grep WARN
you will see what LDAP stuff is required - openldap
On Thu, Dec 8, 2011 at 9:51 AM, Nick Khamis sym...@gmail.com wrote:
Hello Everyone,
I tried to compile FreeRADIUS with LDAP support however, rlm_ldap has
not been compiled.
Are libldap-2.4-2 libldap-dev not sufficent? Do I need to install OpenLDAP?
Try libldap2-dev. That's what on
Hi,
i am making procedure for Alvarion IOT.
freebsd# /usr/local/bin/git clone
git://git.freeradius.org/freeradius-server.git
Cloning into freeradius-server...
git.freeradius.org[0: 88.190.25.44]: errno=Operation timed out
fatal: unable to connect a socket (Operation timed out)
are there other
Hi,
freebsd# /usr/local/bin/git clone
git://git.freeradius.org/freeradius-server.git
Cloning into freeradius-server...
git.freeradius.org[0: 88.190.25.44]: errno=Operation timed out
fatal: unable to connect a socket (Operation timed out)
check your connectivity...
$ git clone
Actually the 5.x GHz Extreme product is a fully 16e protocol, just not WiMax
certified. The 4-Motion product is fully WiMax certified as you point out.
WiMax as a protocol uses EAP-TTLS/TLS and does not send the username in the
outer tunnel. If you watch the debug you will see the
Hey Alan,
I responded off list by accident but his real problem is that his
Framed-Filter-Id is not formatted properly for his NAS.
David
From: freeradius-users-bounces+david.peterson=acc-corp@lists.freeradius.org
AD Коньков Евгений wrote:
BUG: you must not detach from console when 'radiusd -X'
AD FreeRADIUS does *not* detach from the console when using radiusd -X.
Thank you all
I have found where is problem. This is BUG for maintainer of FreeBSD
port
/usr/local/etc/rc.d/radiusd
Alan DeKok (al...@deployingradius.com) [11.10.14 13:05] wrote:
so, may be it is worth to mention that somewhere amongst the possible
causes?
The wiki can be edited by anyone. Go for it.
since you reply i was trying several times to do that ... though i do
not use nither twitter nor
On Thu, Dec 8, 2011 at 8:18 PM, Zeus V Panchenko z...@ibs.dn.ua wrote:
since you reply i was trying several times to do that ... though i do
not use nither twitter nor github, i registered with github and trying
to authenticate on http://wiki.freeradius.org
but each time i fail with:
Hello,
I will try to explain what i am trying to achive.
I am developing a freeradius module called rlm_itap. This module uses a
shared library called print.so (a library i use for test purposes.).
There is only one procedure in the library and it is called : myprint()
. I am able to run
On 08/12/11 13:18, Zeus V Panchenko wrote:
Alan DeKok (al...@deployingradius.com) [11.10.14 13:05] wrote:
so, may be it is worth to mention that somewhere amongst the possible
causes?
The wiki can be edited by anyone. Go for it.
since you reply i was trying several times to do that ...
2011/12/8 Mustafa Reşit Şahin resitsa...@gmail.com:
My makefile.in file
RLM_LIBS = @itap_ldflags@ -L/home/resit/radius/lib/
/home/resit/radius/lib/print.so
shouldn't it be -lprint instead of /home/resit/radius/lib/print.so?
--
Fajar
-
List info/subscribe/unsubscribe? See
Just to post a confirmation, this was my issue (multiple copies of modules in
the /etc/raddb/modules directory), which was self-inflicted since I kept
them there.
I had other issues come up with permissions, logon failures due to realm,
etc. All were resolved with the FreeRADIUS documentation
Well, yes it seems to be problem.
But there is one more thing. The libprint.so should reside in : /usr/lib
or /usr/local/lib/
Considering my experience with writing a module for freeradius i think
wiki page for module creation can be updated with following info:
1) Mentioning autoconf
Mustafa Reşit Şahin wrote:
Considering my experience with writing a module for freeradius i think
wiki page for module creation can be updated with following info:
1) Mentioning autoconf procedure.
No. Autoconf is insane and complicated. There is no reason why
normal people need to use
Mustafa Reşit Şahin wrote:
...
But when i use the method myprint() from the library print.so , i get
the error when i run the server and send a message with radtest :
...
-lc -L/home/resit/radius/lib/ /home/resit/radius/lib/print.so
This is a dynamic linker problem. You've put the library
Thanks, Alan, it works.
I have another question. Can I check the user's group for authentication
via TTLS?
07.12.2011 18:32, Alan DeKok пишет:
Сергей Усов wrote:
I have changed inner_tunnel, but unsuccessfully
You didn't do what I said, so I'm not surprised it didn't work.
Сергей Усов wrote:
Thanks, Alan, it works.
I have another question. Can I check the user's group for authentication
via TTLS?
Put any group checking into the inner-tunnel server. That's what
it's for.
Alan DeKok.
-
List info/subscribe/unsubscribe? See
Hello Everyone,
I do have libldap2-dev installed however, it seems like openldap in all it's
totality is needed?
Thanks in Advnace,
Nick.
On Thu, Dec 8, 2011 at 5:31 AM, Fajar A. Nugraha l...@fajar.net wrote:
On Thu, Dec 8, 2011 at 9:51 AM, Nick Khamis sym...@gmail.com wrote:
Hello Everyone,
Hello Everyone,
When installing the client, some documentation point to:
radiusclient-ng 0.5.6:
http://developer.berlios.de/projects/radiusclient-ng/, and
freeradius-client-1.1.6.tar: ftp://ftp.freeradius.org/pub/freeradius/
Is there a difference between the two? Is one recommended or have
read this: http://freeradius.org/freeradius-client/
from the link below:
In late 2006 it was decided that the FreeRADIUS Project should adopt the
latest code from radiusclient-ng cvs as the basis of a new FreeRADIUS
client package.
I personnally use radiusclient-ng
Le 08/12/2011 19:18, Nick
On 12/08/2011 01:11 PM, Nick Khamis wrote:
Hello Everyone,
I do have libldap2-dev installed however, it seems like openldap in all it's
totality is needed?
What is needed will be listed in the output of configure. Also listed
will be where configure looked for the dependency. You should read
how can i see inner-tunnel portion? from debug?
so, u didn't answer, how did u know it was extreme?)
08 декабря 2011, 16:20 от David Peterson-19 [via FreeRadius]
ml-node+s1045715n5058598...@n5.nabble.com:
Actually the 5.x GHz Extreme product is a fully 16e protocol, just not WiMax
On 12/07/2011 08:37 AM, Michel Bulgado wrote:
On Wednesday 07 December 2011 01:26:08 Fajar A. Nugraha
wrote:
On Wed, Dec 7, 2011 at 1:15 PM,mic...@casa.co.cu wrote:
google search and it turns out all the variations I have
encountered are
implementing freeradius with PEAP TLS and mysql
On Fri, Dec 9, 2011 at 4:11 AM, Michel Bulgado mic...@casa.co.cu wrote:
After the user to authenticate and connect to wireless, I noticed that the
table RadAcct was empty, probing the inner-tunnel file found this:
There are no accounting Requests inside of EAP-TTLS or PEAP tunnels.
What
On 12/08/2011 04:26 PM, Fajar A. Nugraha wrote:
On Fri, Dec 9, 2011 at 4:11 AM, Michel Bulgadomic...@casa.co.cu wrote:
After the user to authenticate and connect to wireless, I noticed that the
table RadAcct was empty, probing the inner-tunnel file found this:
There are no accounting
: %{Packet-Src-IP-Address} - 217.65.160.124
[detail]expand:
/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
- /var/log/radacct/217.65.160.124/detail-20111208
[detail]
/var/log/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d
Paul Thornton wrote:
I've been trying to debug why accounting information isn't making it
into the SQL database on our main FR server (2.1.11) - it seems that
this has been the case since upgrading from version 1.something ancient
a few months back.
OK... the debug log shows you have a
Michel Bulgado mic...@casa.co.cu escribió:
On 12/08/2011 04:26 PM, Fajar A. Nugraha wrote:
On Fri, Dec 9, 2011 at 4:11 AM, Michel Bulgadomic...@casa.co.cu wrote:
After the user to authenticate and connect to wireless, I noticed that the
table RadAcct was empty, probing the inner-tunnel file
On Fri, Dec 9, 2011 at 9:39 AM, mic...@casa.co.cu wrote:
Michel Bulgado mic...@casa.co.cu escribió:
On 12/08/2011 04:26 PM, Fajar A. Nugraha wrote:
On Fri, Dec 9, 2011 at 4:11 AM, Michel Bulgadomic...@casa.co.cu wrote:
After the user to authenticate and connect to wireless, I noticed
On 2011/12/08 09:05 PM, Alexandre Chapellon wrote:
read this: http://freeradius.org/freeradius-client/
from the link below:
In late 2006 it was decided that the FreeRADIUS Project should adopt the
latest code from radiusclient-ng cvs as the basis of a new FreeRADIUS client
package.
I
freebsd# ping git.freeradius.org
PING git.freeradius.org (88.190.25.44): 56 data bytes
64 bytes from 88.190.25.44: icmp_seq=0 ttl=48 time=48.211 ms
64 bytes from 88.190.25.44: icmp_seq=1 ttl=48 time=48.253 ms
64 bytes from 88.190.25.44: icmp_seq=2 ttl=48 time=48.967 ms
^C
--- git.freeradius.org
2011/12/9 Толик Шавловский tolik_shavlov...@mail.ru:
freebsd# ping git.freeradius.org
PING git.freeradius.org (88.190.25.44): 56 data bytes
64 bytes from 88.190.25.44: icmp_seq=0 ttl=48 time=48.211 ms
64 bytes from 88.190.25.44: icmp_seq=1 ttl=48 time=48.253 ms
64 bytes from 88.190.25.44:
35 matches
Mail list logo