Hi,
Ah... a fix wasn't pulled over from v3.0.x to master. I've just done
that now.
server now starts with such switch/case config present. cheers!
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi,
Does FreeRADIUS give a fig about what the username is? If it were all
numeric, say 123456789 I guess it is happy with that? It's just a string
to FreeRADIUS?
FreeRADIUS is just a RADIUS serverand hence any decisions made by it are
all down to defined policies. so if you have
Hi,
this error is also present with 3.1.0 when using the provided
orginate-coa virtual-server - so its reproducable with a minimally
adjusted configuration (just drop originate-coa from sites-available
to sites-enabled)
alan
-
List info/subscribe/unsubscribe? See
hi,
you must ensure you 'sign out' of the AD before you clone as otherwise
both objects are the same...and, as you have found, doing something
with the cloen breaks the first server. or just dont bind to the AD before
cloning.
to fix, you need to ensure that both machines have their own
Hi,
I'e installed oracle instant client from rpm packages (basic + devel)
okay. if you've done this rather than manually installing from Oracle then
its most likely that the paths are different...you will need to check where
your Oracle files have been installed and use those paths instead
Hi,
Thu Oct 10 11:52:16 2013 : Info: WARNING: Module rlm_eap became
unblocked for request 47516341
...since the return of our students this year.
I am 99% sure this is ntlm_auth being slow, and I have a strong
suspicion this is related to some changes in our AD infrastructure
over the
Hi,
Any chance you can point me in the direction of these?
heres one:
http://support.microsoft.com/kb/2688798
Semi-related, but to my annoyance we're seeing rather less SSL
resumption than I would expect, given that iOS and Android both do
it by default.
Cisco wireless problem?
theres
Hi,
Samba 4 is lurvely... apparently 100% compatible with existing AD
installations, although, as always, it's a bit finicky and info is a bit thin
on the ground (and I've not written up a guide when I set my test environment
up that uses an S4 server for EAP-MSCHAPv2). But at least it
Hi,
Just got a wee bit of trouble linking in the talloc libraries, but I'm sure
its not insurmountable
Alan uses OSX so I'm *SURE* it compiles fine with the right support stuff
present - you
should have been compiling it before the official release ;-)
alan
-
List
Hi,
It appears the debugging switches don't work quite as I'd expect in
FreeRADIUS 3 when RadSec is configured.
# radiusd -fxx -l stdout
yep. if you try 'radiusd -X' it will tell you to run it like that.
# radiusd -fXx -l stdout
# ./sbin/radiusd -Cfxx -l stdout
single thread
Hi,
if (Service-Type == NAS-Prompt-User) {
if (NAS-IP-Address =~ /^172\.17\.107\./) {
if (User-Name =~ /^wisms\-testing/) {
update control {
Auth-Type := Accept
}
ouch do you realise how dangerous that is? there
should be no need to send an access accept packet back
Hi,
If everyone's in favor, I'll release 2.2.2 on Monday.
hold request
now its monday AM and the load has gone back to higher levels
the server is freaking out and freezing witht he last message in
the log being
Mon Oct 7 07:50:28 2013 : Error: [event.c:2318] Internal sanity check
Hi,
We're finding these nuggets of code as we dig deeper into James's
legacy config. If the Access-Accept response is not required, then
presumably I can ditch that entire code block and let the
wisms-testing auth attempt go through the system as any other user.
yesbut you'd be better
Hi,
Well you want the probes to go through and hit your backed authentication
servers,
and your databases, and any external resource.
..and get a valid user with access accept? bad. you are better off just
semding a reject -
just like RADIUS status server probes. it would be nice if the
Hi,
More debug output would help. The last patch came from output sent by
Stefan. The patch seems to help. But there's an underlying issue which is
harder to debug. It looks like a Linux specific IPv6 problem. I don't see
any issue with v4.
interesting..the culprit may have been
Hi,
a couple of logic issues that meant case/switch and if() worked different
to 2.x - thats been fixed. ..and an issue if your server does a lot of proxying
work - in which worker threads arent dealt with properly - your log file
will be full of core and module messages if you are being hit.
Hi,
If I asked particularly nicely, and promised you a beer at the next
networkshop
we were both in attendance at, would you be willing to try git head?
I'll take the beer - am running HEAD since last night on one server :-)
(as I said to Alan, i'll report at end of day)
alan
-
List
Hi
early report :(
2.2.2 HEAD still showing:
Fri Oct 4 13:20:43 2013 : Info: WARNING: Child is hung for request 3767589 in
component core module thread.
Fri Oct 4 13:20:45 2013 : Info: WARNING: Child is hung for request 3767589 in
component core module thread.
Fri Oct 4 13:20:47 2013 :
Hi,
I would like to display the active Radius connections. When I run radwho I
get the following results (showing nothing but the titles) even though I know
I have an active connection:
using the utmp/wtmp modules? what does your FreeRADIUS debug show when
someone logging in?
alan
-
List
Hi,
this is FreeRADIUS list, not general Linux lsit - I'd suggest looking at some
guides for
the EXACT thing you need eg
http://www.cyberciti.biz/faq/linux-unix-formatting-dates-for-display/
(and ensure your escape quotes are the right way around)
alan
-
List info/subscribe/unsubscribe? See
Hi,
I am not blaming, I am just wanting to get the radwho command to work. I
have now turned on accounting info to be sent from the StrongSwan server to
the FreeRadius server. For I can see the accounting info in
/var/log/radius/radacct/IP_Address/detail-20131003 file. However I am
Hi,
A simple thing:
infected case
update control {
Tmp-String-0 := stop
}
...
if (Tmp-String-0 != stop) {
BUNCH OF UNLANG CODE
}
That should work. Ugly, but functional.
this is pretty much what I was
Hi,
Thanks for your reply. However, I have already changed the instances of the
password testing123 in the following files:
if you are dealing with a shared secret between a NAS and the FreeRADIUS
server, there are only
2 thigns to configure
1) the shared secret on the NAS - I would guess
Hi,
Sep 30 12:56:36 newdvlanb radiusd[10152]: rlm_eap: No EAP session
matching the State variable.
Sep 30 12:00:21 dvlanc radiusd[16053]: WARNING: Child is hung for
request 782076 in component authenticate module peap.
Sep 30 12:57:08 newdvlanb radiusd[10152]: Discarding duplicate
request
Hi,
Is there any way to prevent FreeRadius from showing the password in
logs (debug logs) when authentication is done via LDAP?
dont run in debug mode. debug mode is there for a reason - to debug
problems. verify if things like passwords are correct. look at the mailing list
archive - this
Hi,
encountering some issues with those (yet quite rare) people with Windows
Phone 8 (WP8) systems.
WP8 devices are yet able to connect without (any) CA or common name
verification, but seem
to fail when I let them check the CA by choosing it from the device' CA
store.
Hi,
..so many new features... thought 3.x was where the new features and dev work
was going into ;-)
PS has anyone tested it with MariaDB? Wondering if its 100% drop-in compatible?
(I'm postgres myself but looks like MySQL is dying)
alan
-
List info/subscribe/unsubscribe? See
Hi,
Could not authenticate user Username%Password with plaintext password
challenge/response password authentication succeeded
thats okay. means you couldnt do PAP and only MSCHAPv2 worked. expected for
that command.
In this Step, i must edit the following line with this text in
Hi,
Sep 16 09:57:56 newdvlanb radiusd[15211]: rlm_eap: No EAP session
matching the State variable.
turn on full debug for just a single User-Name or Calling-Station-Id
(check radmin docs). whats your authentication clean-up/tidy up times -
as if the clients dont respond then the session is
Hi,
i am getting a problem on Freeradius installed on CentOS. When i set the
service Radiusd in debug mode and send an access request (default type
PAP) through Radtest the debug show the password in cleartext.
Is there an option to do not show the fiedl User-Password in
Hi,
no. I guess we should do something with it to make it FIPS compliant but it's
not a big priority. You're welcome to submit a patch.
..you mean sniffable by NSA? it passes that requirement already ;-)
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi,
mv raddb raddb-noinst
mkdir raddb
touch raddb/all.mk
make install
do 'mkdir raddb/mods-config'
you've 'messed around' with the configuration directory which assumes
that mods-config exists... i guess that could be fixed to make dir
directory first if it doesnt exist.
alan
-
List
Hi,
NEVER
agreed. still a useful reference.
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi,
If you think that sucks, wait till you see the horrible things you have to do
to generate a .mobileconfig without access to an OSX server license.
what, download the iPhone Configuration Utility? yes, quite horrible ;-)
alan
-
List info/subscribe/unsubscribe? See
hi,
yes, it was receivedover a bank holiday weekend. not surprised
you didnt get an answer...we were all enjoying the break.
the DB seems to be loading up and being connected to (and you can
check this with loggin on the pgsql server...) however, THIS bit
is your problems
rlm_sql (sql):
Hi,
I'm trying to setup a very basic test server using FreeRADIUS (running on
Ubuntu 12.04) that uses PEAP with the example certificates generated by
FreeRADIUS.
out of the box, freeRADIUS works - you just need, for testing
to add your user/pass to the 'users' file and your NAS to
Hi,
Initially FreeRadius would not start and I did get an error indicating
that the remote_secret_reject module failed to load. There was no reason
given even with -XXX. I found since then that I was missing a brace.
Now I can get FreeRadius to start. I still seem to be missing something
hi,
check permissions/owner etc of /etc/freeradius and the contents
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi,
Thanks for this. So you're saying that there can only be one policy
{} section in the whole server, and if I wish to load two sets of
policies I will have to merge the two files?
each policy has its own name/tag - in FR 3, there is a policy.d directory
in which policy files get put...each
Hi,
peap {
default_eap_type = mschapv2
proxy_tunneled_request_as_eap = yes
copy_request_to_tunnel = no
use_tunneled_reply = yes
tls = eduroam-eap-tls
}
okay
Any request that tries to go to the proxy causes this to happen:
Wed Aug 7 11:57:35 2013 :
Hi,
Hi, I would like to store freeradius session information like
Acct-Session-Id, Acct-Start-Time, Acct-Stop-Time, Acct-Input-Octets,
Acct-Output-Octets, Framed-IP-Address, NAS-IP-Address in external
database.
the defauly config does this - you just need to edit the SQL module
Hi,
I forgot to mention that I am using freeradius-2.2.0-2.el6.x86_64.
Should this version support it or not?
no, it wont support it. you need the latest code from the GIT to use that
feature.
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi,
Is there any other flag/function that would indicate that an
Access-Challenge packet was received from the NAS?
dont know..I have the following on a 2.2.0 box in the authenticate section:
if (handled (Response-Packet-Type == Access-Challenge)) {
Hi,
My password is encrypted with MD5 but it can be seen in the debug screen.
Is there any way to disallow or masquerade the use's password in debug
mode ???
its debug mode. the entire purpose is to ensure that things are
what they appear to be and silly things like, 'its doesnt
Hi,
User-Password = \334a\004\305\355x\321\332G\306\362b\226~\355+
that lineand the following in the debug:
Fri Aug 2 16:45:38 2013 : Debug: WARNING: Unprintable characters in the
password. Double-check the shared secret on the server and the NAS!
are quite clear.
Hi,
file users:
DEFAULT Ldap-Group ==
Huntgroup-Name ==
multiple lines? the first line is CHECK items. other lines are REPY items
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi,
It was my mistake, when i was testing.
Corrected DEFAULT Ldap-Group == , Huntgroup-Name ==
Still not working as i want.
output?
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi,
Here comes:
rlm_ldap::ldap_groupcmp: User found in group
radiusd -X
its what the docs say. for a reason
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi,
We have a a supplicant that is our own box doing client 802.1x
authentication using freeradius. We do not establish a TLS/IPSec
connection between the supplicant and freeradius. We need to establish a
secure channel between the supplicant and freeradius.
NAS or supplicant? a
Hi,
Does freeradius support RFC 6614 for the same?
'tls' virtual server in HEAD version of FreeRADIUS (currently version 3 in beta)
if you NEED to tick to FreeRADIUS 2.x (as you 'need' to secure) - then
RADSECProxy can be put in as a brudge between your remote and the FR instance
alan
-
Hi,
In that situation i need to have active, both sql and ldap, authorization
modules in inner-tunnel. So users, who should identify by login/pass in
guest SSID, can be authenticate via inner-tunnel ldap module. I don't want
this.
use whatever you want to use. what do you use
Hi,
I was thinking this should be easy, but it's been two weeks and I give
up...
well, depends how you do itif you do it easy it is easy, no?
users file
abc Cleartext-Password := xyz, NAS-Identifier = staff
Reply-Message Welcome on-board staff member
dont forget, if this
Hi,
If the user authenticates against to radius server and fails NTLM_AUTH,
the request will then be authenticated against PAM and if it still fails
it will be rejected.
use a bit of the unlang construct with the failover method.
http://wiki.freeradius.org/config/Fail%20over
so,
Hi,
Feel free to add your own feature requests :)
number of UDP packets - i.e. is/was the datagram fragmented?
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi,
Your previous answer gives an example using the unlang regex syntax,
including the case-insensitive operator at the end. But I was hoping to find
an elegant way to do case-insensitive matching in proxy.conf, where the
comments admit that the syntax breaks the rules of unlang regex
Hi,
Sorry, I've been unclear. What I meant was that I strongly suspect
nas-radius comms will either be v4 or v6 for a given pairing at any one
time, for periods of minutes or hours. Hence treating the addresses as
separately should be fine
hmm, yes, we treat each as a seperate
Hi,
Is there a way to tell radius to not do something based on the User-Name
containing a $ ? I am doing dynamic VLAN assignment and I'd like to skip
that for computer logins. I looked at unlang and I didn't see a way to
check for a character in a username.
use unlang regex
Hi,
Still... maybe for a later version... if the input looks like an IP
address, guessing the address family isn't all that hard.
unlike your using IPv4 in its IPv6 incantation
What if the NAS started just using the SRC IPv6 address in packets, and
source IP protection was enabled?
Hi,
My guess is dual-stack NAS-RADIUS is going to be rare.
ummm. take a hold on that assertion. the joy of dual-stack deployment
is that you need to ensure your servers are ready on IPv4 and IPv6 -
and as part of that, you need to ensure that your using both methods
in case either your IPv4
Hi,
I put the FreeRadius list on CC because I get technical solution from
here.
the version from freeradius.org works - you need to contact Debian to get them
to fix
their packages.
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi,
While trying that I also build a 3.0 GIT HEAD and there were a few
problems, I trippeled about:
- HINTS does not work the way it did before. Especially this no
longer works for me:
DEFAULT User-Name =~ ^v104([^@]+)
User-Name := %{1}@V104.GMVL.DE
I
Hi,
I am trying to configure eap with some customized certificates, I have
configured eap.config correctly.
But I am getting the error of certificate expired. Although i have the
latest certificates.
certificate has expired. FreeRADIUS has no reason to lie.
check the startup
Hi,
I´m wondering, if I miss something or why do Info-Messages about
Invalid-Message-Authenticator not appear
in the default radius.log anymore? Even can´t get it with
such messages only appear in debug mode as logging to file could be a DoS
alan
-
List info/subscribe/unsubscribe? See
Hi,
But it DID appear in earlier versions of freeradius with default settings for
logging.
And I don´t see the difference to something logging Erros like
Error: Ignoring request to authentication address * port 1812 from unknown
client x.x.x.x port 1092
regarding the mentioned DoS
Hi,
I am configuring my freeradius to be integrated in the EDUROAM federation.
It works when the VLAN (as configured in the accesspoint) is statically
assigned.
there are hundreds of sites using this sort of configuration for eduroam - so
its perfectly possible and fine (and standard!) so
Hi,
The specific configuration works fine I remove the following line from users
file:
Tunnel-Type := VLAN, Tunnel-Medium-Type := IEEE-802, Tunnel-Private-
Group-ID := 218
Tunnel-Type = VLAN,
Tunnel-Medium-Type = IEEE-802,
Tunnel-Private-Group-ID = 218
Hi,
Here you can download the (almost complete) debug log. Near the end I added a
text to make evident when I disconnected.
http://webshare.icgeb.org//data/public/ce2e2ee9fbd84c362fd49b10805b36c8.php?lang=en
please dont ask me to visit random web sites that require to to click on things
Hi,
To get by the work of those kittens I set up a remote login to run radmin
commands and parse the output so it is suitable for mrtg. It has worked well
for me.
I use the munin plugin to graph auths/accts
alan
-
List info/subscribe/unsubscribe? See
Hi,
Currently we have 1000´s of users self-signed certificates (EAP-TLS),
and we´re planning to move our main authentication method to PEAP, but
keeping the certificates in use while valid.
To avoid the need of installing our CA certificate on every Windows
machine, we´ll buy the server
Hi,
Thank you Arran, that's what I suspected but hoped that there would be
another way to find out.
I'll see if Netgear is willing to approve existence of AV pairs (and if
theyre willing to share them).
on some kit you can run a command to see the VSA list/desc
most vendors will
Hi,
Ready to process requests.
rad_recv: Accounting-Request packet from host 10.141.1.129 port 49154,
id=0, length=84
snip thats an accounting packet
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi,
Sending Access-Accept of id 0 to 10.141.1.129 port 49154
^^
Access-Accept sent from the server. the RADIUS server has done
its thing. if the NAS isnt working then you have missed some
configuration option on the NAS
alan
-
Hi,
(Sorry if this is OT) As I understand, I couldn't use 802.1x
authentication on just the switches themselves? Since a client must have
certificates to authenticate to a server. What i just wanted to accomplish
is to authenticate the switches only on the radius server, so this
Hi,
waits a long time until timing out waiting for user input. I'd like to
also discover how other NAS's behave using this and have found the timeout
on a particular cisco 1131 access point to be quite short.
most NAS devices have configurable options for their RADIUS/EAP timers.
Hi,
We'd like to simplify our configuration and use the same port for both.
the default configuration does that
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi,
We have a generic VPN profile that we'd like to allow *all* users to
login to - this works well.
When users login to the secret profile, then the following VPN
attribute is included in the request:
Vendor-3076-Attr-146 = 0x554d44
use/load the dictionary.cisoc.vpn3000 dictionary file
Hi,
and this is the output from radius (ran as radiusd -X)
http://pastebin.com/MT0txW2c
please post to the list - avoids more work at this end.
the output shows this:
Found Auth-Type = LDAP
# Executing group from file /etc/raddb/sites-enabled/default
+- entering group LDAP {...}
[ldap] login
Hi,
Am trying to have my users' credentials or attributes change say a when a
user hits their expiry date, their profile drops to one that does not
expire but can only get to a certain page, requesting them to renew their
account, Some kind of redirection, but after account has
Hi,
Alc-IPsec-Interface: Unknown attribute requires a hex string, not
private_ipsec
so give it a hex string then
private_ipsec is 707269766174655f6970736563
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi,
I'm now sure that the best way for us is MAC Address filtering.
thats a way of doing the 'host' part. the user can then be authenticated
by an EAP method.
ie authorization stage can check the calling-station-id (MAC address) and,
if not known, just reject. then, if known carry on to
Hi,
I am creating attributes for the user using the scripts below but on
running the radtest i get the failure attributes ; which seems to have
changed. I am using Freeradius 2.1.0 .
user1test Auth-Type := Local, User-Password == testpassword
Hi,
Always start simple. Run radtest on the RADIUS server box
using 127.0.0.1 ... THEN move to running against it from other
systems once you've verified all authentication etc is working
Works on localhost.
Trying to get radius to authenticate against an ldap
serer.
Hi,
Chain INPUT (policy ACCEPT)
target prot opt source destination
ACCEPT tcp -- 0.0.0.0/00.0.0.0/0tcp
dpt:1812
you see this - TCP
read a little about RADIUS it uses UDP
change your rule to allow UDP port 1812
# radtest
Hi,
But when i comment the attributes the radtest is successful
did you check my other statement:
3) ensure that these attributes that you are using are in a dictionary
file and that the dictionary file is being read by the server when it
starts
well?
alan
-
List
Hi,
I had it wide open. Someone suggested I add the tcp above.
who suggested that? standard basic old fashioned RADIUS uses
UDP ports 1812,1813 and 1814 - even older versions pre IANA adjustments
would have used UDP 1645 and 1646
I get that. What I want the RADIUS server to do is
Hi,
With user administrator not worked. look log file
[ldap] performing user authorization for test
[ldap] expand: ((objectClass=user)(sAMAccountName=%{User-Name})) -
((objectClass=user)(sAMAccountName=test))
[ldap] expand: dc=batlab,dc=corp - dc=batlab,dc=corp
Hi,
On 21 Jun 2013, at 20:18, Divyesh Raithatha divyesh.raitha...@gmail.com
wrote:
Hello,
Has anyone successfully built RPM's from the main branch 3.x?
I am trying to build one but keep on running into errors. Similar to the
ones I saw with the version 2.x.x branch
Hi,
freeradius silently drop packets from unknown client.
unless run in debug mode at which point it'll clearly print out
Ignoring request to blahblah from unknown client x.x.x.x port
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi,
I`m not able to debug, what does macro RAUTH do :(. Coudl you please help me,
thx.
ah. just noticed this is actually with 3.x - yes, the older releases logged but
current
version doesnt. I'll have to help you out with this as I need logging on that
platform :-)
alan
-
List
Hi,
) ENGINE=MyISAM DEFAULT CHARSET=latin1;
urgh. i'll have to agree with others here MyISAM should have died many years
ago..its a plague on any bust MySQL box. use at least InnoDB - which is
supported
by MySQL natively for many a year. and before any complaints about users
who
Hi,
When i use parameter -x, everythink works correct ( i see auth log message ):
that'll be because with -x or -X the service runs as root. without those
arguments it
will run as th user configured in the radiusd.conf - please ensure that
user/group
is able to write into that location
alan
Hi,
Hi,
I never run radiusd as root user ( for both cases ).
yes you do - when you are running in '-x' mode
The user/group is able to write, because i see general log message
Wed Jun 19 08:18:49 2013 : Info: Loaded virtual server default
Wed Jun 19 08:18:49 2013 : Info: Loaded virtual
Hi,
I have managed to setup a simple test using eapol_test as per
http://www.openlogic.com/wazi/bid/188089/Authenticating-Wi-Fi-Users-with-FreeRADIUS
thats a rather old...and random URL. why not look at official docs?
and it all works as described except that I have to use ca.pem
Hi,
I will make it short and easy.
You can't do LDAP authentication with 802.1x. EAP needs the password of
the user in cleartext. if it's not in your ldap, you're screwed.
..EAP-TTLS/PAP ? ;-)
alan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi,
Some other comments -
Upgrade from 2.1.12 to 2.2.x, as there are security issues pre
2.2.x.
Save yourself some round trip packets by setting default_eap_type
= ttls in eap.conf
Save yourself some LDAP lookups by removing ldap from the outer.
..and save some more hits to LDAP by
Hi,
This *is* proxying the inner tunnel; the inner tunnel auth is also EAP, and
you're sending it to the remote server.
Thanks, this is NOT what I want to do. I want to send the inner message, not
the tunnel and do PAP on the remote server.
okay. so you need to start by terminating the
Hi,
He he he... if I recall correctly I came up with something like:
yes, thats the one. quoted as 'most evil unlang ever' if I recall
have used it on many occasions...does the job well
...as the EAP module was updated to return ok on identity/mschap
responses. Yet another reason to upgrade!
Hi,
check the shared secret you have defined in clients.conf on the server.
check the shared secret you are using on the client
check the server debug logs etc to see WHAT IP the client is coming
through - if you are using a localhost address or nameif using the
name it might be using
Hi,
This is on debian squeeze and I have libtalloc-dev installed. I also tried
adding --with-talloc-include-dir=/usr/include but this did not help.
what version of talloc does debian ship? I've no problems with talloc on CentOS
or
SUSE
alan
-
List info/subscribe/unsubscribe? See
Hi,
I have the added each machine as a client of the other for testing in
clients.conf they both have the shared secret aaabbb
incorrect shared secret someone. double check your proxy.conf on each system.
the retry etc is likely to be because the first challenge failed due to
the
1 - 100 of 1503 matches
Mail list logo