On Fri, May 17, 2013 at 2:09 AM, Wang, Yu ywan...@fsu.edu wrote:
Hello,
I upgraded FR from 2.1.10 to 2.2.1. Everything went well except about 25% of
our wireless users cannot authenticate after the upgrade. The backend
authentication server is Active Directory and we use ntlm_auth from
Hi,
Sorry I resend the message because of original message was bounced
because it was too big.
I have a really weird problem. We have a lot of NAS'es and no one of
them had this problem, except only one! It gets always login
incorrect. If I run
eapol_test it complains saying. I've tried
Sergio Belkin wrote:
I have a really weird problem. We have a lot of NAS'es and no one of
them had this problem, except only one! It gets always login
incorrect.
Throw the NAS in the garbage.
If I run
eapol_test it complains saying. I've tried replacing the nas a few
times
What does
2011/12/17 Alan DeKok al...@deployingradius.com:
Sergio Belkin wrote:
I have a really weird problem. We have a lot of NAS'es and no one of
them had this problem, except only one! It gets always login
incorrect.
Throw the NAS in the garbage.
If I run
eapol_test it complains saying. I've
Sergio Belkin wrote:
Ooops, sorry it says could not extract EAP-Message from
RADIUS message
That's a message on the NAS. Ask the NAS manufacturer what it means.
Hmmm, so it should something wrong in the network, because I've tried
from 2 differentes Access Points, with differents firmware
2011/12/17 Alan DeKok al...@deployingradius.com:
Sergio Belkin wrote:
Ooops, sorry it says could not extract EAP-Message from
RADIUS message
That's a message on the NAS. Ask the NAS manufacturer what it means.
Hmmm, so it should something wrong in the network, because I've tried
from 2
2011/12/16 Sergio Belkin seb...@gmail.com:
Hi,
I have a really weird problem. We have a lot of NAS'es and no one of
them had this problem. It gets always login incorrect. If I run
eapol_test it complains saying. I've tried replacing the nas a few
times and makes no difference. And it doesnt
2011/12/16 Sergio Belkin seb...@gmail.com:
2011/12/16 Sergio Belkin seb...@gmail.com:
Hi,
I have a really weird problem. We have a lot of NAS'es and no one of
them had this problem. It gets always login incorrect. If I run
eapol_test it complains saying. I've tried replacing the nas a few
Hi,
Sorry I resend the message because of original message was bounced
because it was big.
I have a really weird problem. We have a lot of NAS'es and no one of
them had this problem, except only one! It gets always login
incorrect. If I run
eapol_test it complains saying. I've tried replacing
one. It's set up to us MySQL for all the authentication and such and as I
mentioned it works fine with the other two access points. However, when the
Meraki access point tries to authenticate using SHA-Password credentials in
the MySQL database I get a Login incorrect. Here is a bit from
Hi,
Sat Dec 4 09:21:54 2010 : Auth: Login OK: [testing] (from client Meraki
port 0 via TLS tunnel)
Sat Dec 4 09:21:54 2010 : Auth: Login OK: [testing] (from client Meraki
port 0 cli 00-00-00-00-00-02)
Sat Dec 4 09:22:24 2010 : Auth: Login incorrect: [test2] (from client
Meraki port 0 via
danodemano wrote:
As requested, here is the debug output with one failed login from the Meraki
AP and one successful login from radtest, both using the same
username/password. Thanks!
The entire point of the debug log is for you to *READ IT*.
If this is too hard, paste the output into
doesn't work with SHA1. I created an NT hash (ntlm_auth) user in the
database and can use this user/password to authenticate from the Meraki
access point. Thanks for your help!!!
--
View this message in context:
http://freeradius.1045715.n5.nabble.com/Meraki-Access-Points-Login-incorrect
ann kok wrote:
I am using the NTRadping is fine for user. The radius log is showing Auth:
Login OK:
But when I try it via Lns, it won't work.
See the FAQ for it doesn't work
It shows Login incorrect in the same user in NTRadping
What is this problem?
How can I check it?
Run
/10, Alan DeKok al...@deployingradius.com wrote:
From: Alan DeKok al...@deployingradius.com
Subject: Re: urgent help about login Auth: Login incorrect
To: FreeRadius users mailing list freeradius-users@lists.freeradius.org
Received: Sunday, November 7, 2010, 7:09 AM
ann kok wrote:
I am using
Hi all
I am using the NTRadping is fine for user. The radius log is showing Auth:
Login OK:
But when I try it via Lns, it won't work.
It shows Login incorrect in the same user in NTRadping
What is this problem?
How can I check it?
Thank you so much.
-
List info/subscribe/unsubscribe? See
Hi,
[peap] The users session was previously rejected: returning reject (again.)
[peap] *** This means you need to read the PREVIOUS messages in the debug
output
[peap] *** to find out the reason why the user was rejected.
[peap] *** Look for reject or fail. Those earlier messages will
Hi guys ,
Im trying to authenticate freeradius against passwd , but i keep getting
Login Incorrect error , im doing EAP/PEAP mschapv2
I dont know what im missing
I can perform a radtest with sucess .
Here is the ouput
rad_recv: Access-Request packet from host 192.168.0.1 port 2048, id=187
Paulo Maia wrote:
Im trying to authenticate freeradius against passwd , but i keep getting
Login Incorrect error , im doing EAP/PEAP mschapv2
I dont know what im missing
I can perform a radtest with sucess .
Here is the ouput
Which you need to read. The debug output you posted to the list
.
rlm_pap: Passwords don't match
++[pap] returns reject
auth: Failed to validate the user.
Login incorrect (rlm_pap: CRYPT password check failed): [omega/testing]
(from client localhost port 1)
Found Post-Auth-Type Reject
+- entering group REJECT
expand: %{User-Name} - omega
attr_filter
Hi,
i reinstall completely freeradius.
radius.conf is not changed
i just put on the top of users file
omega Cleartext-Password := testing
and run radtest
radtest omega testing 127.0.0.1 1 testing123
Sending Access-Request of id 62 to 127.0.0.1 port 1812
User-Name = omega
Hi,
so i made an update.
you certianly did. i dont know WHAT you are doing or WHY
you re doing it but you have changed other things.
look, its very very obvious
including files in directory /etc/freeradius/sites-enabled/
and then into the system. but thats wierd, because last time,
so i made an update.
i change the user in users file ( that not exist on my etc/passwd)
here is my freeradius -X
radiusTest:/# freeradius -X
FreeRADIUS Version 2.1.8, for host i486-pc-linux-gnu, built on Jan 2 2010
at 19:56:16
Copyright (C) 1999-2009 The FreeRADIUS server project and
i' m so sorry, it's a debian package from
http://packages.debian.org/fr/squeeze/freeradius.
i'm really confused.
i'm sorry
2010/3/9 Alan Buxey a.l.m.bu...@lboro.ac.uk
Hi,
so i made an update.
you certianly did. i dont know WHAT you are doing or WHY
you re doing it but you have changed
.
Authentication may fail because of this.
++[pap] returns noop
No authenticate method (Auth-Type) configuration found for the
request: Rejecting the user
Failed to authenticate the user.
Login incorrect (rlm_ldap: User not found): [hoyo/hoyo] (from client
my_radius_client_pc port 0)
Using
Hi anders:
Do you have the other the set the ldap user password ? how to do ?
Regards,
vicky
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Anders Holm
Sent: Wednesday, November 26, 2008 3:00 PM
To: FreeRadius users mailing list
Subject: Re: Login incorrect (rlm_ldap
well, problem is solved. The IP for the my realm was wrong.
Now everything works without any problem
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
a foreign enterprise to
login and use the WLAN. No problem here. But the other way round doesn´t work.
I asked a collegue from one of those foreign enterprises to test the login with
[EMAIL PROTECTED]
He gave me the following error message:
Mon Aug 4 17:19:57 2008 : Auth: Login incorrect (Home
message:
Mon Aug 4 17:19:57 2008 : Auth: Login incorrect (Home Server says so):
[EMAIL PROTECTED] (from client CB-Access-Point-802.11 port 2 cli
00-1B-77-A4-7B-A2)
I don´t know where the problem is. Perhaps you can give me a hint?
Is the outside central server configured to forward mydomain.com
Hi,
It definitely is configured to proxy the request to my server.
(We are not the first ones having this service, there are more than 100 I think that
already have this. So I trust those peaple managing the outside central
server when they say it it configured...)
Well in this case: ask
: Re: [radius] Re: Login incorrect- RAS autentication
You using a Database backend or user file?
Nick Marino - IT Solutions
- Original Message -
From: Dave Weis [EMAIL PROTECTED]
To: FreeRadius users mailing list freeradius-users@lists.freeradius.org
Sent: Tuesday, November 15, 2005 8:42 PM
ame = "banner"
User-Password = "ascend"
NAS-IP-Address = 192.168.1.3
NAS-Port = 0
NAS-Port-Type = Virtual
Service-Type = Outbound-User
State = 0x
Login incorrect: [initial-banner-RAS/ascend] (from client
RAS port 0)
Login incorrect: [banner/ascend] (from client RAS port
-Mensaje original-De: Danny Zenzano
[mailto:[EMAIL PROTECTED]Enviado el: martes, 15 de
noviembre de 2005 19:57Para:
'freeradius-users@lists.freeradius.org'Asunto: Login incorrect- RAS
autentication
hi,
I am trying to make work
anRAS(lucent-max6000
ame = "banner"
User-Password = "ascend"
NAS-IP-Address = 192.168.1.3
NAS-Port = 0
NAS-Port-Type = Virtual
Service-Type = Outbound-User
State = 0x
Login incorrect: [initial-banner-RAS/ascend] (from client
RAS port 0)
Login incorrect: [banner/ascend] (from client RAS port
Why did you send this three times? It's normal for the TNT line to try and
download configuration settings via radius unless you have turned it off.
I don't remember the name of the setting but it's listed in the
documentation and google can find it.
On Tue, 15 Nov 2005, Danny Zenzano
You using a Database backend or user file?
Nick Marino - IT Solutions
- Original Message -
From: Dave Weis [EMAIL PROTECTED]
To: FreeRadius users mailing list freeradius-users@lists.freeradius.org
Sent: Tuesday, November 15, 2005 8:42 PM
Subject: [radius] Re: Login incorrect- RAS
In the Colubris I put andreabencini password.
Did you tell the server that was the correct password?
Sat Oct 15 17:10:10 2005 : Info: rlm_eap_md5: User-Password is required
for
EAP-MD5 authentication
Sat Oct 15 17:10:10 2005 : Debug: rlm_eap: Handler failed in EAP/md5
Nope.
Andrea Bencini [EMAIL PROTECTED] wrote:
Alan I don't understand what you are saying. Could you explain to me with
more detail?
In order to authenticate a user who has a password, the server needs
to know what the correct password is for that user. You didn't tell
the server the correct
Oct 15 17:10:10 2005 : Debug: auth: Failed to validate the user.
Sat Oct 15 17:10:10 2005 : Auth: Login incorrect: [L005-00076/no
User-Password attribute] (from client miarete-privata port 0 cli
00-02-2D-A6-01-E9)
Sat Oct 15 17:10:10 2005 : Debug: Delaying request 3 for 1 seconds
Sat Oct 15 17:10:10
Andrea Bencini [EMAIL PROTECTED] wrote:
In the Colubris I put andreabencini password.
Did you tell the server that was the correct password?
Sat Oct 15 17:10:10 2005 : Info: rlm_eap_md5: User-Password is required for
EAP-MD5 authentication
Sat Oct 15 17:10:10 2005 : Debug: rlm_eap:
Hi friends
There are a weird something happening here. This is
our log about a user:
Wed Jun 29 22:36:03 2005 : Auth: Login incorrect:
[EMAIL PROTECTED]/no User-Password attribute]
(from client 10.5.0.2 port 5060)
Wed Jun 29 22:36:04 2005 : Auth: Login incorrect:
[EMAIL PROTECTED]/no User
Bruno Machado [EMAIL PROTECTED] wrote:
I already tried to discover the problem, but I didn't
find anything.
Have you tried running it in debugging mode?
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Dear FreeRadius list members,
I'm really stuck with an authentication problem here:
I'm getting the following error meesage anytime a user try to connect
through my Freeradius server :
Auth: Login incorrect: [user/CHAP-Password] (from client MT2_ADSL port
1476461184)
Auth: rlm_unix
the following error meesage anytime a user try to connect
through my Freeradius server :
Auth: Login incorrect: [user/CHAP-Password] (from client MT2_ADSL
port 1476461184)
Auth: rlm_unix: Attribute User-Password is required for
authentication. Cannot use CHAP-Password.
Here is the radius entry
members,
I'm really stuck with an authentication problem here:
I'm getting the following error meesage anytime a user try to connect
through my Freeradius server :
Auth: Login incorrect: [user/CHAP-Password] (from client MT2_ADSL port
1476461184)
Auth: rlm_unix: Attribute User-Password is required
Azmi Bikarbass wrote:
Dear FreeRadius list members,
I'm really stuck with an authentication problem here:
I'm getting the following error meesage anytime a user try to connect
through my Freeradius server :
Auth: Login incorrect: [user/CHAP-Password] (from client MT2_ADSL
port 1476461184
Adil Azmi Bikarbass [EMAIL PROTECTED] wrote:
Auth: Login incorrect: [user/CHAP-Password] (from client MT2_ADSL port
1476461184)
Auth: rlm_unix: Attribute User-Password is required for authentication.
Cannot use CHAP-Password.
You have set Auth-Type := System, which doesn't work for CHAP
Adil Azmi Bikarbass [EMAIL PROTECTED] wrote:
Yes but the Auth-Type := System is at the end of the users file while
the user has its entries at the beginning o the users file!
That's nice.
It's also irrelevant.
Run the server in debugging mode to see which entries are matched,
and why.
Title: Freeradius with postgresql (Login incorrect)
Hi, all
I am trying to configure postgresql 7.4 as a backend of freeradius server.
After I run radtest radius radius 47.135.23.217 1812 testing123 The debug file shows:
rad_recv: Access-Request packet from host 47.135.123.217:32782
Brian Gao [EMAIL PROTECTED] wrote:
Login incorrect: [radius/radius] (from client 47.135.123.0 port 1812)
So... the password is wrong.
This looks to me like the connection is established already, the
error that is being thrown looks like it is coming from the
PostgreSQL.
No. It's coming
Title: Freeradius with postgresql (Login incorrect)
Please send mail in PLAIN TEXT!
I don't know where YOU see an error message, but I
don't see any.
I would suggest turning SQL traces on (see
postgresql.conf)
--Groeten, Regards, Salutations,
Thor SpruytM: +32 (0)475 67 22 65E: [EMAIL
after putting on my PC freeradius-snapshot-20040723/ all the time i'm
receving this kind of errors:
Auth: Login incorrect: [edg/.]
This appears as with rlm_sql using as simply with freeradiusd config files.
In the debugging mode just said (both with/without specifying Auth-Type):
auth
Edgars [EMAIL PROTECTED] wrote:
In the debugging mode just said (both with/without specifying Auth-Type):
auth: No authenticate method (Auth-Type) configuration found for the
request: Rejecting the user
auth: Failed to validate the user.
Are there any known issue like this?
No. If
but this Ayth-Type has also default value hasn't it? i think it was
local...so it should work anyway,also without specifying this attribute.
Edgars
Alan DeKok wrote:
Edgars [EMAIL PROTECTED] wrote:
In the debugging mode just said (both with/without specifying Auth-Type):
auth: No authenticate
after putting on my PC freeradius-snapshot-20040723/ all the time i'm
receving this kind of errors:
Auth: Login incorrect: [edg/.]
This appears as with rlm_sql using as simply with freeradiusd config
files.
In the debugging mode just said (both with/without specifying Auth-Type):
auth
Edgars [EMAIL PROTECTED] wrote:
but this Ayth-Type has also default value hasn't it?
No.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
56 matches
Mail list logo
