Currently Im using a ip_pool as radius server at my CPD, for a cisco
serving as private GPRS APN (property of telecom italia mobile); this
setup is intended to get some kind of grps vpn.
The problem is that a get always the same 2 ips (but theres a lot
more, in fact, actually Im using the
:))
**
**
WARNING: Panda Antivirus GateDefender has detected a virus in file
attached to this e-mail message!
The attachment has been automatically removed to
protect your network.
Use jradiusclient
Galbayar Dorjgotov
Senior Software Engineer
Mobile Business Development Department
MobiCom Corp
http://www.mobicom.mn
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of MaFai
Sent: 2004
10 29 14:16
To: freeradius-users
Subject:
hello,
I'm trying to set up a configuration with an Alcatel Omniswitch 6600-24 and
Freeradius 1.0.1. 802.1x client is either native XP or open1x (EAP-MD5).
Communication seem to go between the switch and Freeradius but authentication
fails.
Did someone succeded with the same kind of
hi.
When running radrelay on 162Mb accounting file it dies with segmentation fault.
There is quite enough disk space on the working partition:
/dev/dsk/c1t0d0s713842586 9457567 424659470%/export/home
freeradius is of version 1.0.1.
gdb output is below:
# gdb /opt/fr/bin/radrelay
GNU
Hello,
For accounting_stop packet it's better to use Acct-Session-Time because for
a call that the same user do you can use this to seperate the calls. In this
way you can handle a lot of calls that one user do. All this if you want to
know about the calls one by one.
Kyriaki Gali,
IT
Title: Mensagem
Hi,
I´m trying to
install freeradius 1.0.1-1 in a Fedora Core 2 box but I´m getting lots os errors
inmake install command.
libtool: install:
`rlm_acct_unique.la' is not a valid libtool archiveTry `libtool --help
--mode=install' for more information.gmake[6]: Leaving
Hi all,
Has anyone have some information how i handle
priv levels in 5300xl's and freeradius?
Id like to make account wich have priv level 14 access (Operator RO)
and couple level 15 access (Manager RW).
I get aaa working, but i dont know how i must to do that level
thing in users.conf.
Best
Hi,
I am using EAP-TLS to authenticate a wireless Station to FreeRADIUS
through an AP but am getting Bad Signature error.
Following is the output of FreeRADIUS:
rlm_eap_tls: TLS 1.0 Handshake [length 05e1], Certificate
chain-depth=1,
error=0
-- User-Name = Paradigm
-- BUF-Name =
-- subject =
On Fri, 2004-10-29 at 14:57 +0300, Ville Leinonen wrote:
Hi all,
Has anyone have some information how i handle
priv levels in 5300xl's and freeradius?
Id like to make account wich have priv level 14 access (Operator RO)
and couple level 15 access (Manager RW).
I get aaa working, but i
On Fri, 2004-10-29 at 12:40, John Horne wrote:
We have a Fedora Core 2 linux server which unfortunately automatically
upgraded, using yum, from freeradius 0.9.3 to 1.0.1 last night. (I did
not intend that to happen so that I could check out the changes with
1.0.1 to ensure that it would work
Hello,
I've been using FreeRADIUS 1.0.0 so far. I just tried
to install FreeRADIUS 1.0.1, but I'm encountering a
problem : I get a bus error upon receiving an
access-request.
I've got a very simple module that, on authorize
event, tries to access request, request-packet
and request-packet-vps.
Alexander Serkin [EMAIL PROTECTED] wrote:
When running radrelay on 162Mb accounting file it dies with segmentation fault.
There is quite enough disk space on the working partition:
It's probably a previously-reported bug in radrelay. version 1.0.2
will contain the fix.
Alan DeKok.
-
Hi
I tried to configure EAP-md5 :
I did NOT set Auth-Type := EAP in the users file (as written in eap.conf)
moduel eap ist loaded:
Module: Loaded eap
eap: default_eap_type = md5
in the authorize and the authenticate section of radiusd.conf I entered eap
but I get following errors:
Recently I installed 1.0.1 and am very pleased with it. One thing I would
like to do is have it log to syslog so I can send the logs to a central
server so technical staff can use the logs for troubleshooting. If I tell
FreeRadius to log to syslog the correct way, it doesn't. I know the source
=?iso-8859-1?Q?Geissb=FChler_Johannes?= [EMAIL PROTECTED] wrote:
I tried to configure EAP-md5 :
I did NOT set Auth-Type := EAP in the users file (as written in eap.conf)
Ok...
in the authorize and the authenticate section of radiusd.conf I entered eap
Why? They're already included in
Christian Reeves [EMAIL PROTECTED] wrote:
If I tell FreeRadius to log to syslog the correct way, it doesn't.
What correct way?
I think that in 1.0.x, the -l syslog command-line option doesn't
work. In the CVS snapshots, there is another, better way to tell the
server to log to syslog.
If I tell FreeRadius to log to syslog the correct way, it doesn't.
What correct way?
I set the -l flag in the startup script and the -g flag to set the facility.
In the CVS snapshots, there is another, better
way to tell the server to log to syslog.
I'll have a look at the
Hello, I have an interesting problem. We are trying to migrate from
Merit radius 3.6B to freeradius. It seems to work for 99%
of the users, however about 1% of the users, it fails to receive a
password for. If we point the NAS back to the merit server
they get on without a problem. We are using
Wade Kemp [EMAIL PROTECTED] wrote:
Hello, I have an interesting problem. We are trying to migrate from
Merit radius 3.6B to freeradius. It seems to work for 99%
of the users, however about 1% of the users, it fails to receive a
password for.
for the user? That's odd. The NAS sends
Title: Message
someone else suggested this to me and it worked for me on FC 2
-
ln -s
/usr/include/et/com_err.h /usr/include/com_err.h
Ron
Ron
Nutter[EMAIL PROTECTED]Network ManagerInformation
Technology
Hi,
Jradius is a good API.
I have extended the API with vendor
specific attributes and multiple attribute values which Im glad to share if
you want it.
Regards
/P
Frn:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Fr MaFai
Skickat: Friday, October 29, 2004
8:16 AM
Title: Nachricht
Gurus,
I'll
need a RADIUS Proxy sytsem wich is able to proxy requests qualified
by
-usernam,
-called-station-id,
-source IP,
to
some other RADIUS servers.
The
big thing is: it must be fault tolerant and must proxy some thousends of
requests per second (starting with 1000
On Fri, 29 Oct 2004, Stefan wrote:
The big thing is: it must be fault tolerant and must proxy some thousends of
requests per second (starting with 1000 complete sessions: Auth, Acct-Start,
Acct-Stop).
Would Freeradius be able to do this?
Yes.
Is there a nearly equivalent implementation
Having a bit of trouble with the setup on of MYSQL with Freeradius.
I am able to test these accounts using DA's check password tool so I don't
believe I have the wrong password.
Where I seem to be missing some configuration is in the radiusd.conf file
with regards to the auth: type . I cant for
Chaigneau Nicolas [EMAIL PROTECTED] wrote:
I've been using FreeRADIUS 1.0.0 so far. I just tried
to install FreeRADIUS 1.0.1, but I'm encountering a
problem : I get a bus error upon receiving an
access-request.
Did you re-build you module in 1.0.1, or just re-use the lobrary
from 1.0.0?
Kirk, Andrew J. [EMAIL PROTECTED] wrote:
Where I seem to be missing some configuration is in the radiusd.conf file
with regards to the auth: type . I cant for the life of me find where the
setting would be to get radiusd to use mysql to check passwords.
You don't. MySQL is a database, it
28 matches
Mail list logo