hello im using freeradius 1.02-4 (debian)
if i have my access points set for mac address authentication via radius
what settings do i require on the freeradius end?
currently in my DB i have it setup as this
groupname: Enabled
Auth-Type :=Local
Compression used: :=Van-Jacobsen-TCP-IP
Service
Hello while adding a NAS thru dialupadmin i noticed
that the changes dont take effect unless the freeradius process is restarted is
this intended? or is something wrong with my config
I.E. i added 192.168.0.1 /as a NAS but when i
tried to authenticate with the nas , the debug showed it
On Wed, 2005-10-19 at 19:28 -0400, Alan DeKok wrote:
+-+-+---+--++
| id | UserName| Attribute | Value| op |
+-+-+---+--++
| 376 | [EMAIL PROTECTED] | User-Password | password | == |
Hi,
Now when a wireless client trys to connect will the NAS sends the mac
address and does it append the NAS password or do you supply a specific
password for the mac address?
when it authenticates the Wireless client will they have internet access
(obtained ip/dhcp etc all thru the nas)
On Thu, 2005-10-20 at 09:17 +0200, Luca Corti wrote:
On Wed, 2005-10-19 at 19:28 -0400, Alan DeKok wrote:
+-+-+---+--++
| id | UserName| Attribute | Value| op |
+-+-+---+--++
| 376
my radiusd uses rlm_ippool. Sometimes ippool gives one ip for two
different users simultaneously.
here output of rlm_ippool_tool.
# rlm_ippool_tool -va /etc/raddb/pools/db.pool-1-pool1* | grep X.Y.Z.170
NAS:192.168.0.1 port:0xde - ipaddr:X.Y.Z.170 active:1 cli:0 num:1
NAS:192.168.0.1
Hi all,
We have very big voip traffic, and currently we were
using mysql DB with the following server
configurations, But we are getting lot of problems
some time the devise are failed, some time the
database is slow
. Etc.
The current configuration is:
OS: Red Hat Enterprise Linux ES 3
Hi,
The current configuration is:
OS: Red Hat Enterprise Linux ES 3
PROCESSOR: Dual 3.2 GHz Intel Xeon
MEMORY : 2GB DDR RAM
Hard Drive: 2 x 36.4GB SCA Ultra 160 SCSI Hard Drive
(RAID 1)
RAID CONTROLLER
CHASSIS: 2U
BACKUP AGENT: Legato Managed Backup Agent
NETWRK: Aggregate
Abdul Lateef wrote:
We have very big voip traffic, and currently we were
using mysql DB with the following server
configurations, But we are getting lot of problems
some time the devise are failed, some time the
database is slow
. Etc.
I don't think that buying expensive hardware is a long
See the list postings from earlier in the day... If you grab the latest
CVS snapshot, you don't have to use the Perl wrapper as the rlm_mschap
module will do the name rewriting for you.
--Mike
Roy Hooper wrote:
After spending a fair bit of time searching list archives and google results,
Error: Invalid operator for item Password: reverting to '=='
New setup using a text file for auth
when doing a test login from the console with the radtest login seems to go ok.
but when the nas is sending the users info I am getting entrys like above in the log file
and not sure where to
To all,
Well, after months of trying to get this working and integrated into our
system, guess what ..
I've managed it with the help of you lovely people to finally get this
working with the aide also
of lots and lots of full strength coffee and severe lack of excercise.
Many thanks to the
Hello,
How do you get FreeRADIUS to stop ingoring VSAs? I have a box that's
sending them and FreeRADIUS is simply ignoring them in rad_recv
rad_recv: Accounting-Request packet from host 10.10.0.90:1068, id=0, length=58
NAS-Identifier = acme-sd
Acct-Status-Type = Accounting-On
Which VSAs are you sending in the accounting packet?
Are they correctly enumerated in a dictionary file? Is the dictionary
file referenced in the main dictionary file?
Can you send us the accounting packet you're seeing?
Rgds,
Guy
-Original Message-
From: [EMAIL PROTECTED]
Hello
I'm searching for scripts that are able to parse the
radacct/xxx.xxx.xxx.xxx/detail-xxx file to perform
some simple statistics ?
Thanks
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hello,
I am using freeRadius 1.0.2, and I would like to
limit weekly bandwidth for my VPN ( pptp ) users. So Ive changed the example
counter part in my radiusd.conf
counter weekly_traffic {
filename = ${raddbdir}/db.weekly
key = User-Name
count-attribute
= Acct-Input-Octets
Frank Bonnet [EMAIL PROTECTED] wrote:
I'm searching for scripts that are able to parse the
radacct/xxx.xxx.xxx.xxx/detail-xxx file to perform
some simple statistics ?
radiusreport.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Frank Bonnet wrote:
Hello
I'm searching for scripts that are able to parse the
radacct/xxx.xxx.xxx.xxx/detail-xxx file to perform
some simple statistics ?
Thanks
- List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
what do you mean with parsing?, i got
Hello,
We have an older NT 4 server running an installation of
Preside RADIUS with a multitude of users profiles. Ive exported
the users to a .rif file is this something
that can somehow be imported into a freeRADIUS
install? Ill search for the how if it is possible.
Many thanks!
Hi everyone:
I'm going to try to explain this as best I can. I'm
using Freeradius 1.0.5 on a Linux Redhat 9 server. I have a network monitoring
program on another computer called What's Up Gold. It is made by a company
called Ipswitch. There is a setting in the WUG program that lets you
Im quite aware of what is being sent and what is shown via debug mode.
unfortunatly i dont have access to the specific NAS in question so i cant
see what attributes are being sent so im restricted to testing from computer
to computer instead of the actual NAS to radius.
and My personal
Linda Pagillo [EMAIL PROTECTED] wrote:
This is how Ipswitch explains how it works:
What we specified for a test is an INVALID test for the userid TEST as
it not encoded using the secret key. Then what we expect back is a
response telling us the userid doesn't exist.
This isn't how RADIUS
Hi, Does PAM radius client need shared library support to be able to work ? I could port successfully PAM radius client to Router platform which has shared library support. However I need to port the same PAM radius client to other router platforms which do not have shared library support. Has
Thank you once again Mr.DeKok. I have already added the secret to my
clients.conf entry. I also already checked into adding the shared secret to
WUG and there is no way to do this, so i'm told. Is there another way around
this problem? Perhaps i have my clients.conf entry incorrect. Here is
If you can't change the shared secret in WUG then change the secret in your
clients.conf to match what is in WUG.
Or better yet, abandon WUG and it's windows platform and use
www.intermapper.com It is a MUCH better product and works just fine with
freeradius, I'm doing so here. It also runs
If you can't change the shared secret in WUG then change the secret in your
clients.conf to match what is in WUG.
Or better yet, abandon WUG and it's windows platform and use
www.intermapper.com It is a MUCH better product and works just fine with
freeradius, I'm doing so here. It also runs
Nick B [EMAIL PROTECTED] wrote:
Im quite aware of what is being sent and what is shown via debug mode.
unfortunatly i dont have access to the specific NAS in question so i cant
see what attributes are being sent
Uh, no. Debug mode shows you what attributes are being sent.
My question
I know with the AP-600 the password is the same as the NAS password.
Edward
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alan
DeKok
Sent: Thursday, October 20, 2005 8:01 PM
To: FreeRadius users mailing list
Subject: Re: wifi / mac authentication
Hello list,
I have a user that belongs to multiple groups, lets say in the usergroup
table, I have username Paul_S that belongs to Group1, Group2 and Group3
(using a different row for each group membership). In the radgroupreply
table, I have multiple different attributes for each group.
When I
29 matches
Mail list logo
