freeradius 2.0.4 and peap

Hello all, I have installed freeradius 2.0.4 and now I'm trying to configure peap. When I try to connect using a Windows XP laptop, the server rejects the user. The log shows this information: rlm_eap: processing type mschapv2 +- entering group MS-CHAP rlm_mschap: No Cleartext-Password

Re: freeradius 2.0.4 and peap

Ivan Kalik escribió: You have experlty deleted all the relevant information from the debug and your configuration. Post the complete debug. I solved the problem commenting the line virtual_server = inner-tunnel in the peap section of eap.conf -- - Manuel

LDAP access configuration

Hello all, I have a scenario where a first radius server (R1) proxies the authentication request to another radius server (R2). Later, when the user is authenticated, R1 must access to a LDAP server to recover some network parameters, such as session-timeout or framed-ip-address, and enforce them

PEAP authentication + LDAP attribute recovery

Hi all, It is possible to configure freeradius to authenticate users using PEAP and then, for authenticated users, return some RADIUS attributes recovered from a LDAP server, such as Session-Timeout or Framed-IP-Address?. And in that case, how can I configure it? Thanks in adavance --

Re: Radius attributes and APs

Alan DeKok escribió: David Mitton wrote: The problem with compiling such a list is acquiring the equipment to test. Adding up everyone on this list, we can probably account for most networking equipment sold in the past 10 years. The problem is getting that information out, and

Radius attributes and APs

Can anybody tell me any Access Point which understand and enforce some radius attributes returned by freeradius, such as Session-Timeout. Thanks in advance. -- - Manuel Sanchez Cuenca Departamento de Ingenieria de la Informacion y las Comunicaciones Facultad de

RadSec

Hello all, is RadSec implemented in FreeRadius? or it is planned to be done? Thanks in advance. -- - Manuel Sanchez Cuenca Departamento de Ingenieria de la Informacion y las Comunicaciones Facultad de Informatica. Universidad de Murcia Campus de Espinardo - 30080

AP and radius attributes

Hello all, does anybody knows if the linksys wrt54g AP support any radius attribute, such as Session-Timeout. Anyway, can anybody tell me which APs applies the radius attributes sent by the freeradius server after a successful authentication? Thanks in advance. --

Radius Attributes

Hello all, How must I configure my freeradius server to include in the Access-Accept response to the AP several radius attributes such as Session-Timeout or Framed-IP-Address? Thanks in advance. -- - Manuel Sanchez Cuenca Departamento de Ingenieria de la

PEAP Version

Hello all, can anybody tell me which version of PEAP is implemented in FreeRadius? is the PEAP version 2 implemented? Thanks in advance. -- == Manuel Sanchez Cuenca Dept. Ingenieria de la Informacion y las Comunicaciones Universidad de Murcia -

PEAP failure

Hello all, Can anybody tell me which means this error when using peap: rlm_mschap: No User-Password configured. Cannot create LM-Password. rlm_mschap: No User-Password configured. Cannot create NT-Password. rlm_mschap: doing MS-CHAPv2 for lolo with NT-Password rlm_mschap: FAILED: No

Re: PEAP failure

Alan DeKok escribió: =?ISO-8859-1?Q?Manuel_S=E1nchez_Cuenca?= [EMAIL PROTECTED] wrote: rlm_mschap: No User-Password configured. Cannot create NT-Password. rlm_mschap: doing MS-CHAPv2 for lolo with NT-Password rlm_mschap: FAILED: No NT/LM-Password. Cannot perform authentication. PEAP

Re: peap failure

Alan DeKok escribió: =?ISO-8859-1?Q?Manuel_S=E1nchez_Cuenca?= [EMAIL PROTECTED] wrote: Hello all, I have insalled the CVS version of Freeradius and I have configured it to use peap. I'm using Xsupplicant as client and a DWL-900AP+ as Access Point. Upgrade xsupplicant. They had a bug

Re: peap failure

-07 at 08:55, Manuel Sánchez Cuenca wrote: Hello all, I have insalled the CVS version of Freeradius and I have configured it to use peap. I'm using Xsupplicant as client and a DWL-900AP+ as Access Point. The problem is that the connect proccess fails, and lookig the radius log I have seen

peap failure

Hello all, I have insalled the CVS version of Freeradius and I have configured it to use peap. I'm using Xsupplicant as client and a DWL-900AP+ as Access Point. The problem is that the connect proccess fails, and lookig the radius log I have seen that the first phase is correct, but in the