Hi GNUbie,
You don't need the special patch for testing EAP-SIM.
Just get 3 different triplets for your SIM and create a static users file entry
with them, contrary to what -X says, you should put the triplets attrs as reply
attrs, not check attrs.
Regards,
Thor.
- Original Message -
Hi,
I have the same problem with both 2.1.11 and 2.1.12-pre ...
I'm on CentOS 4.6 with following RPMs:
$ rpm -qa | grep devel
glibc-devel-2.3.4-2.39
krb5-devel-1.3.4-60.el4_7.2
mysql-devel-5.0.54-1.el4.centos
openssl-devel-0.9.7a-43.17.el4_8.5
kernel-smp-devel-2.6.9-67.0.4.EL
/
Bern / Rome / Stockholm / Vienna
Subject: Re: Postgresql undefined symbol PQinitSSL
Thor Spruyt wrote:
Any ideas on what could be the problem here or any solution or tips on where
to look further?
FreeRADIUS is built with Postgresql SSL. So it assumes that
Postgresql can do SSL, too
Hi,
You could use a huntgroup for the MAC addresses and then define what to do for
that huntgroup.
Thor.
- Original Message -
From: syharash syhar...@yahoo.com
To: freeradius-users@lists.freeradius.org
Sent: Tuesday, April 12, 2011 12:11:51 PM GMT +01:00 Amsterdam / Berlin / Bern
/
Hi,
Read http://wiki.freeradius.org/Rlm_sql section Instances
Regards,
Thor.
- Original Message -
From: c schwarz c.schw...@funknetz.at
To: freeradius-users@lists.freeradius.org
Sent: Tuesday, April 12, 2011 1:36:17 PM GMT +01:00 Amsterdam / Berlin / Bern /
Rome / Stockholm /
Hi,
Read http://wiki.freeradius.org/Fail-over
Regards,
Thor.
- Original Message -
From: Marco Kalmbach mc...@gmx.de
To: freeradius-users@lists.freeradius.org
Sent: Tuesday, April 12, 2011 3:24:35 PM GMT +01:00 Amsterdam / Berlin / Bern /
Rome / Stockholm / Vienna
Subject: ldap and
Hi,
Read http://wiki.freeradius.org/Rlm_ldap
You might want to play with basedn and filter.
Regards,
Thor.
- Original Message -
From: pradyumna dash pradyumna_dash...@yahoo.co.in
To: freeradius-users@lists.freeradius.org
Sent: Tuesday, April 12, 2011 4:34:52 PM GMT +01:00 Amsterdam /
Hi,
If you're going to use LDAP, then just add the Called-Station-Id to your search
filter and add one or multiple attributes to match against in your LDAP entries.
Regards,
Thor.
- Original Message -
From: Sergio Belkin seb...@gmail.com
To: FreeRadius users mailing list
- Oorspronkelijk bericht -
Van
: wessam seleem [mailto:wessam.sel...@gmail.com]
Verzonden
: zondag
, september
27, 2009 02:34 PM
Aan
: 'FreeRadius users mailing list'
Onderwerp
: Re:
Dear Thor and Ivan,
Thanks for your support. I would like to notice that I have the
same
- Oorspronkelijk bericht -
Van
: Alexander Clouter [mailto:a...@digriz.org.uk]
Verzonden
: donderdag
, september
24, 2009 05:24 PM
Aan
: freeradius-users@lists.freeradius.org
Onderwerp
: Re: Mimic lower_user in FR2
Thor Spruyt thor.spr...@telenet.be wrote:
Since lower_user doesn't
Hi,
Since lower_user doesn't exist anymore in FR2, I was thinking of doing the
following in FR2 to mimic the behaviour, which seems to be working correctly:
In hints file:
DEFAULT User-Name !~ /^$/
User-Name := `%{exec:/opt/tolower %{User-Name}}`,
Fall-Through = Yes
DEFAULT
Hi,
I tried to get this working also and I found that if you let the ldap module
*not* check the password_header, then the password incl. the header is put in
the User-Password attribute.
If you then use auto_header = yes for the pap module, it should figure out
automatically to do crypt...
Hi,
Compiles and runs smoothly on Centos 4.6 32-bit...
Using postgresql backends and exec module for both auth and acct packets
home_server status_check = none ok, need this ;-)
I've been away from FR evolution for a while... I must say I'm really surprised
what's possible now with 2.1.7
directory `/home/thor/freeradius-server-2.1.4'
make: *** [all] Error 2
Any idea what's going wrong?
Regards,
Thor Spruyt
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hugh Messenger wrote:
I will be out of the office from Wednesday May 30 until Monday
June 4.
What a coincidence! I'll be out of the office during those dates as
well ... hunting down and killing everyone who writes broken
autoresponders.
Sorry, I know I shouldn't increase list pollution
Alan DeKok wrote:
If you're familiar with RADIUS, it will contain little useful
information.
I can confirm this.
I was pretty disappointed about the value of the book when I bought it 3
years ago.
I doesn't go indepth into anything.
Thor.
-
List info/subscribe/unsubscribe? See
Mordor Networks wrote:
hi Graham
yes sir i know but my question is how to do that im all new to all
this.. thank you
Connect to your mysql database and type show tables;, then you'll see a
list of tables in your database.
It's probably the radacct table you need to query for session
http://wiki.freeradius.org/Rlm_sql
- Original Message -
From: Nirmal
To: FreeRadius users mailing list
Sent: Monday, April 09, 2007 1:53 PM
Subject: Re: two database
can i use two sql database in sql.conf for free radius version 0.9 ?
currently i m using freeradius 0.9
There is no uninstall and make clean just cleans the source tree.
Use rpmbuild to make an rpm.
- Original Message -
From: elmalhi abdelghani
To: FreeRadius users mailing list
Sent: Friday, March 23, 2007 3:48 PM
Subject: Re : freeradius unistalling
hi,
but i found always my directory
Sam Schultz wrote:
P.S. A link to a list of known-good access points, or personal
recommendations on access points would also be appreciated.
We will be replacing a few 3com APs soon because they don't
play well with...well...ANYTHING. One (3com OfficeConnect)
doesn't even
rt_sigprocmask(SIG_UNBLOCK, [ABRT], NULL, 8) = 0
tgkill(26392, 26392, SIGABRT) = 0
--- SIGABRT (Aborted) @ 0 (0) ---
+++ killed by SIGABRT +++
Process 26392 detached
--
Thor Spruyt
M: +32 475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
-
List info/subscribe/unsubscribe? See
Garry Glendown wrote:
Thor Spruyt wrote:
Session-Timeout := `%{exec:/bin/echo 200}`
I use exec_program_wait, try having a look at that.
... which doesn't return a value if I'm not mistaken ... !?
It can return several Attribute-Value pairs.
Read the documentation, search google
at that.
--
Thor Spruyt
M: +32 475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
to let both PAP and CHAP succeed, it's up to the
user to decide what to use.
--
Thor Spruyt
M: +32 475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
tail -F radius.log | logger
- Original Message -
From: Michael Messner [EMAIL PROTECTED]
To: freeradius-users@lists.freeradius.org
Sent: Thursday, November 16, 2006 3:10 PM
Subject: logging to normal radius.log and syslog
hey @all,
for testing we write the complete debugging
%RAD_REQUEST) {
radiusd::radlog(1, RAD_REQUEST: $_ = $RAD_REQUEST{$_});
}
}
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list
How about adding a dictionary will all 256 numbers?
- Original Message -
From: Robert Dukes
To: FreeRadius users mailing list
Sent: Thursday, July 13, 2006 9:26 PM
Subject: Re: (no subject)
Sorry, Ok I use Alvarion Su radios that has radius accounting option. but
the radios send some
José Berenguer wrote:
Hello! In the file attrs I have:
domain.es
Reply-Message = RADIUS OK
but it doesn't return me the message.
Try adding a colon before the equals sign.
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
Add this in your script and then run radiusd in
debugging mode:
for (keys %RAD_REQUEST)
{radiusd::radlog(1, "RAD_REQUEST: $_ =
$RAD_REQUEST{$_}");}
--Groeten, Regards, Salutations,
Thor SpruytM: +32 (0)475 67 22 65E: [EMAIL PROTECTED]W: www.thor-spruyt.com
SEND PLAIN TEXT!!!
You can change the SQL queries in the sql configuration file.
If you really want to use a perl script, then go have rlm_exec and rlm_perl
at your disposal... read the docs.
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor
module.
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
First of all: READ http://www.freeradius.org/list/users.html = please send
PLAIN TEST mails!
For your question: read the docs about rlm_exec and rlm_perl
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
http://www.freeradius.org/cgi-bin/cvsweb.cgi/radiusd/
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
.
Run a script each month that takes all records from the month before, do
whatever with them and remove them from the database.
I thought databases are especially friendly for stuff like that...
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor
://www.freeradius.org/list/users.html
Yet another thing to maintain... something that nobody has time for :(
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See
version
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Joe Maimon wrote:
I need to remove an A/V from the reply list, but only if another A/V
is already there.
This needs to be done post-proxy stage for my needs.
rlm_attr_filter can do it
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor
[EMAIL PROTECTED] wrote:
It seems that I missed the user file entry and the
Auth-Type Perl {
perl
}
entry in the radiusd.conf file.
That shouldn't be necessary, just calling the module in the authorize
section should be sufficient.
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0
[EMAIL PROTECTED] wrote:
I have tried the example.pl and it still gives me a access-reject
message.
Please provide your rlm_perl configuration and debug output of radiusd -X
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
to see what queries are done.
Check why they are failing and correct the queries.
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http
that the
FreeRadius project will continue to evolve like it has before.
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
[EMAIL PROTECTED] wrote:
Is there any information about using a script with freeradius to
process authentications?
rlm_exec
rlm_perl (not stable)
rlm_python (not stable)
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
Boian Jordanov wrote:
On Fri, Sep 02, 2005 at 01:16:31AM +0200, Thor Spruyt wrote:
I'm wondering if rlm_perl will support pre/post-proxy functions in
the next release?
This is allready in CVS. You can checkout release 1.19 of rlm_perl and
use it with freeradius 1.0.4
Sure
and let samba
as well as freeradius auth against that backend.
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list
the error.
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Please use correct terminology.
It's AUTHENTICATION, not authentification!
To authenticate = authentication
To authorize = authorization
To account = accounting
To identify = identification
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor
Hi,
I'm wondering if rlm_perl will support pre/post-proxy functions in the next
release?
Also, is there any chance to get bug 275 into next release?
http://bugs.freeradius.org/show_bug.cgi?id=275
Or does it have to be discussed further on the list?
--
Groeten, Regards, Salutations,
Thor Spruyt
as suggested in this tutorial.
http://vuksan.com/linux/dot1x/wpa-client-config.html#Windows_XP
Is there a simpler way to accomplish the same thing?
No
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
suggestions ?
I know I can run a query via psql from radius startup script, but I'd
prefer another solution if such exists.
What exactly would you want to do?
Maybe it serves a general purpose :)
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor
Marc-Henri Boisis-delavaud wrote:
Hello
Were Can I found patches for cisco wlse work ?
Marc
Huh... my best guess would be cisco.com :)
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
How about submitting them to bugs.freeradius.org?
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
- Original Message -
From: M.McNeil
To: FreeRadius users mailing list
Sent: Monday
/experimental.conf
rlm_exec is stable, so your freeradius will support it already.
The configuration is in etc/raddb/radiusd.conf
You can use any executable script (which *can* be a perl script).
Look in CVS, there's a lot of information added about rlm_exec!
--
Groeten, Regards, Salutations,
Thor Spruyt
M
.
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
kevin wrote:
Still not sure how to handle with rlm_exec.
Can anybody give me more details?
Maybe another solution.. in users file TART with:
DEFAULT Auth-Type := Reject
Fall-Through = Yes
kevin
Thor Spruyt wrote:
kevin wrote:
How can I return Reject-Packet without
(in this case traffic
arriving at your server).
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
= reject.sh
before. But, it didn't work for me.
rlm_exec
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
[EMAIL PROTECTED] wrote:
People might be able to do more if they had configs and debug output (-X)
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See
!
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Carlos MartÃnez-Troncoso Cera wrote:
Hello.
We are trying to use FreeRadius with PEAP and LDAP.
You might consider TTLS with PAP instead of PEAP with MS-CHAP-V2
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
Alan DeKok wrote:
with tcpdump -s 1500 -w raw.txt port 1813 and udp.
-s 0 instead of -s 1500 would be better, radius packets are not
restricted to 1500 bytes.
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
/radiusd/scripts/exec-program-wa
it?rev=1.4content-type=text/x-cvsweb-markup
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list
packets are
actually coming in!
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
fine already.
There's a sample script included in the source distribution in
src/module/rlm_perl/
The configuration of the module sits in etc/raddb/experimental.conf for now.
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
with Radiator.
rlm_perl is persistent
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
again the counter is reset back to its origional value. This
means
that user names and passwords last forever.
Check that accounting packets sent by the NAS are actually received on your
radius server.
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W
Alan DeKok wrote:
The RFC's say that the passwords cannot be longer than 127
characters.
Submitted bug 270 to correct.
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info
I've reported bug 266 with a patch for postgresql
http://bugs.freeradius.org/show_bug.cgi?id=266
You don't know the maximum length of the username and password of your
roaming partners, but you need to store those as well into the database.
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32
on the other
server suddenly went to constantly using 100% CPU.
When starting radiusd while 1 database is already down, this doesn't happen.
Looks to me that it's not LDAP or Postgresql related :)
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
http://bugs.freeradius.org/show_bug.cgi?id=256
It's a really big mistake and only a 1-line change!
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See
Thor Spruyt wrote:
Florian Prester wrote:
The Crypted-Password is working and it is available as
Crypt-Password. (Tested with ntradping).
I added DEFAULTAuth-Type := pap at the end of the
users-file, without it wants to use ldap-authentication!
You should set Auth-Type
://vuksan.com/linux/dot1x/802-1x-LDAP.html
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Doug Hardie wrote:
I am a bit confused now. I understood that if a module returns
RLM_MODULE_FAIL that radiusd would not return an authorization
reject. However, it appears that it still does.
Have a look at doc/configurable-failover
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0
to the other radius server.
Maybe your NAS can also do round-robin for load-balancing.
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http
This is completely NAS-specific, so read your NAS documentation to know what
attributes and values to return.
P.S.: try sending plain-text mail next time :)
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
IPTABLES (fedora core) entries that would enable UDP access to
FreeRadius.
http://www.google.be/search?hl=nlq=iptables+samplemeta=
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info
Try connecting to the postgresql database with the same user/pass and from
the same host as freeradius.
Check access rights to the database.
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
Paul Hampson wrote:
On Mon, Jul 18, 2005 at 05:22:51PM +0200, Thor Spruyt wrote:
Hi,
`/home/thor/freeradius-1.0.4/src/modules/rlm_sql/drivers/rlm_sql_mysql'
gcc -g -O2 -D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS
-DOPENSSL_NO_KRB5 -Wal l -D_GNU_SOURCE -DNDEBUG -I../..
-I../../../../include -I
/thor/freeradius-snapshot-20050718/src'
gmake[1]: *** [common] Error 2
gmake[1]: Leaving directory `/home/thor/freeradius-snapshot-20050718'
make: *** [all] Error 2
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
.
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
directory `/home/thor/freeradius-1.0.3/src'
gmake[1]: *** [common] Error 2
gmake[1]: Leaving directory `/home/thor/freeradius-1.0.3'
make: *** [install] Error 2
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
.
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Title: Freeradius with postgresql (Login incorrect)
Please send mail in PLAIN TEXT!
I don't know where YOU see an error message, but I
don't see any.
I would suggest turning SQL traces on (see
postgresql.conf)
--Groeten, Regards, Salutations,
Thor SpruytM: +32 (0)475 67 22 65E: [EMAIL
requests with other attributes than just
User-Name/Password.
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Integrating with freeradius and postgresql.Sure.
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
- Original Message -
From: Brian Gao
To: 'freeradius-users@lists.freeradius.org
Rangel, Luciano wrote:
Rangel, Luciano [EMAIL PROTECTED] wrote:
What should I do to configure fail-over in my freeradius ?
Read doc/configurable_failover and try.
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
{
...
}
sql sql_instance2 {
...
}
And then you can use a specific instance in radiusd.conf, like
so:
authorize {
...
sql_instance1
...
}
accounting {
...
sql_instance1
sql_instance2
...
}
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32
Q1: split the internet in half: 0.0.0.0/1 and 128.0.0.0/1
Q2: read sql docs and configuration files
- Original Message -
From: Lists
To: freeradius-users@lists.freeradius.org
Sent: Friday, February 25, 2005 5:34 PM
Subject: questions about the clients.conf file
Hi,
I have two questions
- Original Message -
From: Patricio Marin [EMAIL PROTECTED]
To: freeradius-users@lists.freeradius.org
Sent: Wednesday, February 23, 2005 8:39 PM
Subject: NAS table replaces clients.conf?
Hi, I made a fresh install of FreeRadius 1.0.2 and I was wondering if
the NAS mysql table is a
- Original Message -
From: Eric Gregory [EMAIL PROTECTED]
Using Freeradius 1.1 and would like to customize the radpostauth table
in MYSQL, I'd like it to not record the plain text passwords on
successful authentications is the most important and also I'd like to
see failed logins
See http://bugs.freeradius.org/show_bug.cgi?id=189
- Original Message -
From: Kevin Bonner [EMAIL PROTECTED]
To: freeradius-users@lists.freeradius.org
Sent: Saturday, February 19, 2005 2:23 AM
Subject: Re: Append realm to username but sorted by dnis
-
List info/subscribe/unsubscribe?
(localhost) to clients list
rlm_sql (sql): Released sql socket id: 4
Module: Instantiated sql (sql)
...
Works for me...
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe
Hi,
I was wondering when rlm_perl will become stable.
What needs to be done in order to get it there?
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22 65
E: [EMAIL PROTECTED]
W: www.thor-spruyt.com
www.salesguide.be
www.telenethotspot.be
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
nake116 nake116 wrote:
I have confuse about to set freeradius with
1.EAP-TLS
2.use Postgresql Database
I don't know the right way to set config file
You could start with
http://www.google.com/search?q=Freeradius+EAP-TLS+Postgresql
--
Groeten, Regards, Salutations,
Thor Spruyt
M: +32 (0)475 67 22
1 - 100 of 329 matches
Mail list logo