see a request.
So what is the solution to this problem?
-- Forwarded message --
Date: Tue, 26 Nov 2002 05:35:16 +0200 (WET)
From: Evren Yurtesen [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: serious radclient bug!
Hi,
I have been sittin here all night to find
.
-Original Message-
From: Evren Yurtesen [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, 26 November 2002 2:19 PM
To: [EMAIL PROTECTED]
Subject: serious radclient bug! (2)
Sorry, maybe this is not a bug =)
But still I couldnt get freeradius to work with MySQL and CHAP
I
Well actually I just tried mikrotik router with pppoe connections although
there were some bugs in mikrotik =( the freeradius was working perfectly
=)
On Tue, 26 Nov 2002, Steve Langasek wrote:
On Tue, Nov 26, 2002 at 10:26:38PM +0100, Uros Vovcak wrote:
Is it possible to USE FreeRadius for
perhaps you should upgrade to freeradius-0.8 ?
On Wed, 27 Nov 2002, betux wrote:
hi all,
i am just install freeradius and i am newbie for that.
what should i do if get error message :
Wed Nov 27 04:38:32 2002 : Error: rlm_eap: EAP-Message not found
Wed Nov 27 04:38:32 2002 : Info:
What kind of db are you using? can you send
radiusd -xx
output of authentication session?
do you mean that the remote server is working good when you connect it
directly? for example with radclient ?
Evren
On Wed, 27 Nov 2002, Jukka Lehti wrote:
Hi,
I've set up freeradius 0.8 so that users
in
freeradius 0.8 or in the snapshots (not sure about that).
you can definitely add whatever you want using postproxying. the
question is however, if there is a simplier way to achieve the same result.
ciao
artur
Evren Yurtesen wrote:
What kind of db are you using? can you send
Nov 2002, Jukka Lehti wrote:
--- Evren Yurtesen [EMAIL PROTECTED] wrote:
What kind of db are you using? can you send
radiusd -xx
output of authentication session?
I'm using MySQL at the moment and it's working ok.
Output attached.
do you mean that the remote server is working good
did you check the mysql server(if you are using mysql) that the user is
there?
On Thu, 28 Nov 2002, Peter Santiago wrote:
Users created with dialup admin is being rejected using radtestAfter
creating user test with passwd testpass... check server doesn't return any
results...
-
so you want to differentiate Async and ISDN users? Like you dont want
Async users to connect to ISDN lines?
if you are using cisco it is sending the port type in authentication
requests of either Async or ISDN you can check this only (I guess) without
needing to use realms etc.
Evren
On Thu, 28
: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Evren
Yurtesen
Sent: Thursday, November 28, 2002 7:44 PM
To: Freeradius-Users
Subject: Re: Dialup_admin in Freeradius 0.8 problem
did you check the mysql server(if you are using mysql) that the user is
there?
On Thu, 28 Nov 2002
I get this in debug output and freeradius dont update radutmp
modcall[accounting]: module radutmp returns noop
What might be the problem?
Evren
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Now checkrad is working but freeradius doesnt wait for the result of
checkrad before authenticating! it passes it immediately almost in half a
second even though checkrad takes about 1 second to complete...
I am using freebsd, can that have something to do with it?
Evren
-
List
;
}
}
About CVS. I dont usually track software with CVS since I believe the
latest is not usually the most stable. But thanks for the advice =)
Evren
On Tue, 3 Dec 2002, Alan DeKok wrote:
Evren Yurtesen [EMAIL PROTECTED] wrote:
Now checkrad is working but freeradius doesnt wait
very
often to have a web interface for checking cvs histories...actually...
Like at http://www.freebsd.org/cgi/cvsweb.cgi/
Evren
On Tue, 3 Dec 2002, Alan DeKok wrote:
Evren Yurtesen [EMAIL PROTECTED] wrote:
actually I already fixed the problem by changing child_pid =0 to
childpid 0
yeah well there is example users file and if you are using sql then you
can try dialup_admin etc.
On Wed, 4 Dec 2002, Simon White wrote:
03-Dec-02 at 16:24, Maurizio Martinoli ([EMAIL PROTECTED]) wrote :
can anyone tell me how to add a user in freeradius?
thank you
There is no way
You can perhaps use some kind of script to transfer /etc/passwd and
/etc/shadow into LDAP and then use PAM to authenticate all your linux
users from LDAP database. Also when you add new users you can add to ldap
and create directories in linux (with a script perhaps).
This way you can get rid of
or actually if you can keep the /etc/passwd /etc/shadow syncronised with
LDAP that would also do the trick. Perhaps with a script you can convert
/etc/passwd /etc/shadow into LDAP or only the changed accounts etc. or
even syncronise the add/remove user functions both in LDAP and in system
files.
Why dont you search the accounting logs then delete the users which logged
in once with a script? Lets say every day? or you can actually change
their passwords too. Is it very crucial that they only logon once? or is
it ok if they can use the account for 1 day?
Evren
On Thu, 5 Dec 2002, Alan
being a C beginner. Is there a
better way to allow them to logon only once than the way I have suggested?
Thanks in advance
Alan
- Original Message -
From: Evren Yurtesen [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, December 05, 2002 11:35 AM
Subject: Re: Password
check out the conf file, there is an option to log them to log file. (I
dont know about mysql) you can login to this freeradius server with ssh
and as many people you like can watch =)
Evren
On Thu, 5 Dec 2002, Ray wrote:
is there a way to get freeRadius to log good and bad logins to MySQL?
well some users are very intelligent =)
perhaps changing the queries about usernames in sql.conf file to case
insensitive would help. (assuming checkrad is working case insensitive)
Evren
On Thu, 5 Dec 2002, Alan DeKok wrote:
System Administrator [EMAIL PROTECTED] wrote:
I am trying to
try deleting /usr/local/var/log/radwtmp for radlast
the rest are in radutmp or sradutmp files
dont you use checkrad ?
Evren
On Sat, 7 Dec 2002, Craig Witter wrote:
I have two radius servers, a primary and a secondary, I'm running free rad
0.7 I issue a radwho on my primary server, I see the
Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of Evren Yurtesen
Sent: Saturday, December 07, 2002 6:15 PM
To: [EMAIL PROTECTED]
Subject: Re: radius
try deleting /usr/local/var/log/radwtmp for radlast
the rest are in radutmp or sradutmp files
dont you use
if you installed freeradius into linux then look at
man 5 users
if you still have questions then you are welcome to send email =)
PS. also see the sample users file which came with freeradius
Evren
On Mon, 9 Dec 2002, Miller, Kenneth L NWP wrote:
Good morning,
I am very new to Radus
good point, cisco use 1645 default if you dont specify in the
configuration. =)
Evren
On Mon, 9 Dec 2002, William Ragsdale wrote:
On Mon, 09 Dec 2002 17:01:05 -0600 Bill [EMAIL PROTECTED] wrote:
Hello!
Can someone send me a radiusd.conf example that would show a connection
for
an
do you think its even checking the mysql database? did you try to run
freeradius with -xx option?
by the way the op field should be := shouldnt it ?
Evren
On Tue, 10 Dec 2002, Mike Paneth wrote:
I have got FR 0.8 MySQL up and running on
LINUX 8, but I cannot authenticate. Where am
I
so what would it matter if it is := ?
I use that one in my conf files? I checked man 5 users but it is not very
clear to me what it means by 'repalaces' etc.
Evren
On Mon, 9 Dec 2002, Ray wrote:
On Monday 09 December 2002 6:51, you wrote:
[root@Psyche root]# radtest root emptar1
Sending
I dont understand actually, if == checks if the a/v is 'equal' then it
must also ensure that it is present.
About := replacing passwords =) I feel like from another planet. It might
only work in a reply item I think. Wouldnt the person authenticate all the
time if it was replacing the a/v pairs
I dont know about radius but its a lot easier configuration when the ip's
in the cisco =)
Evren
On Mon, 9 Dec 2002, Bill wrote:
Hello!
I have a question. I have a Cisco AS5200. It was suggested that I
place the public IP's into the AS5200, however there are provisions in
did you try setting
User-Password
instead of
Password ?
On Wed, 11 Dec 2002 [EMAIL PROTECTED] wrote:
I have instaled freeradius with ./configure, make and make install. I have
added
lolo Password = lolo
Reply-Message = Hola, lolo
to the file users, and starts the server
I am not an expert but it might be possible to set a DEFAULT entry which
will send your private IP's to everyone connected then you can override
this for the authenticated users. The only problem is that I dont know how
to accept the user even when the password check fails.
Evren
On Fri, 13 Dec
well what if the sender say 'my database problem' ?
On Thu, 19 Dec 2002, Ray wrote:
so, who has been signing up the mailing list for stuff?
and can't you (the list maintainers) add a filter to the list, something like
the mysql list has. on the mysql list, it doesn't get through unless it
I have an interesting question to you too =) I also give a hint to your
question at the end also =)
Are you the Murat Hakan who made Motorola's $2 billion turkish bath ?
http://www.business2.com/articles/mag/print/0,1643,44017,FF.html
Also are you using a proxy server in italy
Well you could at least change the subject =)
If you pay to the freeradius developers perhaps they can build you an RPM
Why cant you install from sources anyway?
$$$
Evren
On Tue, 24 Dec 2002, Brian Johnson wrote:
Anyone have a RP? for freeRadius 0.8 (RedHat 7.2 i386)?
If not anyone want
Well I am sure you can get any assistance if you open your wallet enough =)
Perhaps there would be many volunteers here to provide commercial support!
Bad for your company if you cant compile a program and you have to buy it
because of that but well some people just have lots of money to spend =)
I think it listens to all IPs so that shouldnt be a problem, you should
perhaps run 2 radiusd processes with different ports only. You can set
this in conf file if I remember right?
On Mon, 30 Dec 2002, whc wrote:
Can FreeRadius run on a server for listenning two different IP and Port?
How
Well you can write a small script which logs in to your NAS and sends the
command to disconnect your user. Or there was this program called radkill
you should check from google perhaps.
Also maybe there are better ways to do this, maybe somebody in the list
can suggest a better way.
Evren
On
into it.
Else it would be an easy fix
I will do a search for radkill
Thanks
- Original Message -
From: Evren Yurtesen [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, December 30, 2002 10:01 PM
Subject: Re: Disconnecting a user
Well you can write a small script which logs
shouldnt you use += instead of = ?
Attribute += Value
Always matches as a check item, and adds the current
attribute with value to the list of configuration
items.
As a reply item, it has an identical meaning, but the
you should have sql in authorize section
authrorize {
chap
sql
}
and chap or pap or whatever else you use
On Fri, 3 Jan 2003, Robert Canary wrote:
I am a new user to freeradius, and the mailing-list.
Greetings everyone
I have compiled and installed the latest version of freeradius
no, he is on the right list I think, freeradius version is 0.81 but
dialupadmin version is about 1.61 if I am not mistaken?
On Mon, 6 Jan 2003, Tim D. McCracken wrote:
Obviously you are not using FreeRadius, so you are on the wrong list.
FreeRadius is currently on version .8
-Original
About the questions, I put SSL server so I am using dialup_admin with ssl
and you can use any kind of security the apache or your web server
software supports for accessing the pages. I put a simple
username/password which was enough for me.
Evren
On Mon, 6 Jan 2003, Evren Yurtesen wrote
You just cant get radius send the required attribute or it sends the
attribute but the as5300 somehow doesnt care?
Here is a good example(although this is not actually freeradius)
http://lists.cistron.nl/pipermail/cistron-radius/2001-July/001555.html
Evren
On Wed, 8 Jan 2003, Nader Skaros
I wonder why the dialupadmin sets the op field := in passwords even though
it should be ==
Or I am the one who knows wrong?
Evren
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
What do you think is appropriate for Expiration then?
Just wondered...
On Wed, 8 Jan 2003, Kostas Kalevras wrote:
On Wed, 8 Jan 2003, Evren Yurtesen wrote:
I wonder why the dialupadmin sets the op field := in passwords even though
it should be ==
Or I am the one who knows wrong
you can search only inside abc.com domain in google, if you give the right
parameters
On Fri, 10 Jan 2003, Frank Cusack wrote:
On Fri, Jan 10, 2003 at 10:24:43AM -0600, Chris Parker wrote:
At 10:04 AM 1/10/2003 -0500, Alan DeKok wrote:
If I need to search for cisco info, I use the
yes but isnt freeradius supporting ip pools as an experimental feature
nowadays?
Evren
On 14 Jan 2003, Mike Varley wrote:
I looked into this solution (using DHCP as the ip address manager for
RADIUS clients) but in the end hooking in the dhcpclient code to work
with freeradius seemed like a
are you running out of memory? did you check?
a guess would be that freeradius is trying to load the file into memory.
On Mon, 20 Jan 2003, leaobicalho wrote:
Why when use 1,000,000 of users, with users file, show
this message??? if i use 100,000 no have problem, but
when i use many always
Well did you check the system messages right before the process is
killed? If you ran out of memory and swap, definetely there should be
something coming.
Or like this other email on the list, you might have hit to some ulimit
limits.
Evren
On Mon, 20 Jan 2003, leaobicalho wrote:
Yes, the
well it is sending mac address as username,
you should perhaps set the usernames in users file as mac addresses.
what do you have in users file now?
Evren
On Thu, 30 Jan 2003, Shahid M. Bhatti wrote:
Hi,
I'm trying to authenticate Wireless Access Point of
Orinoco/Lucent/Avaya/Agere/Proxim
Well I think maybe he wanted to write 5.0 and wrote 4.0 instead,
accidentally. :)
On Sat, 1 Feb 2003, Alan DeKok wrote:
VPM Support [EMAIL PROTECTED] wrote:
But when I run this same configuration on a FreeBSD v4.0
system everything compiles just fine. The problem is the FreeBSD v4.0
is
Sorry to ask here but I would like to download the latest version of a
file and diff it then send the result back. But in the case of
checkrad.pl.in
that is not the same as checkrad, is it so that I should copy the
changes I made to original to this file and then make diff or ?
How should I
well I dont know if this would work but you could try regex in password so
it might accept any password like * as the password.
On Tue, 11 Feb 2003, stambazzi andrea wrote:
Hi
I have to autenticate my ppp users with free radius without checking password
but only the username. I have no
I think a simple ^.* or .* would match all the characters int he password.
I use := operator for the passwords but...
Well I do not know if the regulare expressions in freeradius work for
passwords. It was just a guess that it might work.
You should check out the output of radiusd -sxx or -sxxx
I dont think so. I didnt use regular expressions before so... :)
I think you are right at using =~ I didnt check what it was...
But is your problem really matching any password or is it ok if the
password is empty? You can maybe try to have an empty password.
Also did you try radius -sxxx and
Well I just check the Called-Station-ID and see if the user has access
rights to that place. Then deny or allow
I just put Called-Station-ID == XXYY etc. to radcheck or radgroupcheck.
Radius doesnt allow user to connect if the NAS sends another ID.
I dont know about sending different reply items
they come with freeradius, see the share directory in the sources.
Evren
On Wed, 12 Feb 2003, Richard A. Bradley wrote:
oh-oh, I didn't have a dictionary file (really). I had a debug error
that the dictionary file could not be found. Does anyone have a
dictionary file laying around that I
I think you can read the section 1
http://www.freeradius.org/faq/
On Sun, 16 Feb 2003, Marat wrote:
Hello colleagues,
I want RADIUS server,
How can I implement it, what software and harware have I to use
Any help will be appreciated
Thanks
Marat
--
--
ïÔ:
One thing is that it should be
Simultaneous-Use and not Simultaneus-Use
Can this be the problem?
On Wed, 19 Feb 2003, Apostolis Ayianoglou wrote:
I use freeradius 0.8.1 with Suse 8 and mysql to authenticate users
Try to authenticate and everything is work fine but,
when I put option
do you have any other .php3 files working? maybe you should set in your
apache conf file that not only .php files should be treated as php files
but also .php3 fiels
On Sat, 1 Mar 2003, Eric wrote:
Hello,
I have such problem with Dialup admin:
When i run it in my browser the left frame
Well I think it is unlikely that only the password will be sent wrong.
There is usually so little time between username and password transfers.
If the connection has some problems that would effect the username too.
To my knowledge usually this kind of trouble happens when the modem change
the
AFAIK the 'other' type doesnt make any checks on the NAS if a user logged
on or not. Radius then relies on the accounting packets received from the
NAS. If you know little perl then you can perhaps make an addition to
radcheck script.
Evren
On Mon, 3 Mar 2003, Eric wrote:
I use chinese nas
Dialupadmin puts = operator for expiration by default.
freeradius complains
Invalid operator for item Expiration: reverting to '=='
Is this a bug or I miss something?
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
sorry, I think its my fault :)
but it could be nice to be able to set a default for dialupadmin for the
op fields of each pair
On Thu, 6 Mar 2003, Evren Yurtesen wrote:
Dialupadmin puts = operator for expiration by default.
freeradius complains
Invalid operator for item Expiration: reverting
run radius with -sxxx and perhaps you can figure out whats wrong then.
On Thu, 6 Mar 2003, Rafa Marín López wrote:
Hello all
I have installed FreeRadius 0.8.1 and I have a CISCO 3600 and a FreeBSD
4.7 client.
When client starts up a PPPoE connection to router , this one sends
Well if you dont see any error messages then perhaps you might try to set
safe mode off in your php server although it is not safe if you have your
customers accessing the same server for web hosting etc. But little
earlier version of dialup_admin had this problem. But the one with 0.81
must have
I would like to migrate from Tacacs+ to FreeRadius. I use the default
plain text configuration file of Tacacs+ and I use MySQL in FreeRadius.
Is there any way to at least copy the passwords of users and the expire
dates from Tacacs+ conf file to MySQL?
Evren
-
List info/subscribe/unsubscribe?
.
-- Forwarded message --
Date: Fri, 18 Jul 2003 03:01:59 +0300 (WET)
From: Evren Yurtesen [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: fix to patch log_badlogins.patch :)
Oups I realized that the patch was adding other messages than auth
messages to mysql too :) So I fixed
-- Forwarded message --
Date: Sat, 19 Jul 2003 18:41:45 +0300 (WET)
From: Evren Yurtesen [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: some bugs in dialup_admin
First of all log_badlogins is getting confused if there is a space in
username. Also I thought it is not very
Well, I tried to manipulate MySQL to my best.
It is impossible to make date calculation functions inside mysql because
the Expiration Attribute is not stored in date type column.
It is also stupid to get each user to php and manipulate there since that
would be very inefficient. This is what I
that? I am a newbie at this after all.
Evren
On Sat, 19 Jul 2003, Evren Yurtesen wrote:
First of all log_badlogins is getting confused if there is a space in
username.
OK, although I don't like the idea of spaces inside the usernames I 've
added
support for that.
Also I thought
I had similar problem.
You should also have
LoadModule php4_module libexec/apache/libphp4.so
AddModule mod_php4.c
My problem was that these were under a IfDefine SSL clause
and I have started server without ssl (doh!)
Evren
On Thu, 24 Jul 2003, Alex Chen wrote:
Barry,
What kind of MIME
]
[mailto:[EMAIL PROTECTED] Behalf Of Evren
Yurtesen
Sent: Thursday, July 24, 2003 3:12 PM
To: [EMAIL PROTECTED]
Subject: RE: dialup_admin
I had similar problem.
You should also have
LoadModule php4_module libexec/apache/libphp4.so
AddModule mod_php4.c
My problem
.
There is no 'AddModule' directive. I do not see how this
affects the web server.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Evren
Yurtesen
Sent: Thursday, July 24, 2003 3:12 PM
To: [EMAIL PROTECTED]
Subject: RE: dialup_admin
I
Look now, I made a unified patch of checkrad but if it is wrong then dont
blame me :) put a page on www.freeradius.org about how you want your
patches please...
The problem was in mikrotik module, I made a little update. It wasnt
working properly...
Evren
-
List info/subscribe/unsubscribe?
how to contribute to this project.
Now when I know... next time will be different.
I also made a patch for the README file in 0.9.0 release :)
Evren
Alan DeKok wrote:
Evren Yurtesen [EMAIL PROTECTED] wrote:
Look now, I made a unified patch of checkrad but if it is wrong
then dont blame me :) put
If you are using a database module then it works.
I dont know if there is any way to do it with users, perhaps somebody
else would answer that :)
Merlin Kauffman wrote:
Is there any way a user file can be edited and new users can be accepted as valid logins without having to restart radiusd?
If you are going to assign a route to your dialup customers. Then you
can use the following (I use MySQL so it looks like this)
UserNameAttribute OP Route
loginmame Framed-Route= 217.21.71.136/29 0.0.0.0 1
If you are using some kind of routing protocol the
think about it yourself,
-easy data manipulation,
-reload of freeradius is not needed
-nice web interface dialup_admin
-you can make your own web interface with php easily with sql connectivity.
These are what I can think of at the moment. I also think it would be
faster than using users file
Thats totally wrong, so you say same cpu works on both db lookups and
freeradius, now when freeradius is making a lookup inside users file
which is in ram, the same cpu doesnt work on db lookups in memory or
what? so thats out of question.
but mysql is optimized for that kind of lookups, there
possible argue that using users file is faster. But perhaps the
difference is so little when you have few thousand users that you can
omit the difference.
Evren
Peter Nixon wrote:
On Tue August 5 2003 05:34, Evren Yurtesen wrote:
Thats totally wrong, so you say same cpu works on both db
etc. But yet they require faster cpu's and more memory in
their system requirements :) When we leave the memory out, I wonder why
a more efficient system require faster cpu :) there is a problem in this
equation :)
Evren
Peter Nixon wrote:
On Tue August 5 2003 06:37, Evren Yurtesen wrote:
Well
2003 16:07:58 -0400
Alan DeKok [EMAIL PROTECTED] wrote:
Evren Yurtesen [EMAIL PROTECTED] wrote:
Everybody argue about something and usually its so difficult to come
to a conclusion. Microsoft says windows is good, linux people say
linux is better, I say FreeBSD is best :)
NetBSD...
Microsoft
: Tuesday, August 05, 2003 2:34 AM
To: [EMAIL PROTECTED]
Subject: Re: Advantages of Using SQL ?
On Tue August 5 2003 08:32, SIMICRO ML wrote:
Peter Nixon wrote:
On Tue August 5 2003 06:37, Evren Yurtesen wrote:
Its like saying that example B is faster than example A in the following
scenario:
A) You
: SIMICRO ML [mailto:[EMAIL PROTECTED]
Sent: Tuesday, August 05, 2003 1:32 AM
To: [EMAIL PROTECTED]
Subject: Re: Advantages of Using SQL ?
Peter Nixon wrote:
On Tue August 5 2003 06:37, Evren Yurtesen wrote:
Its like saying that example B is faster than example A in the following
scenario:
A) You
I have a question, when I set the NAS type to other, then if radius
thinks that the user is online then it doesnt let him connect again.
I then must use radzap to remove to info and then the user can connect
normally again, right?
Is it possible to change this behaviour that if the NAS type is
did you realize these?
# uncomment this if you use the standard
# prefixes
#$user =~ s/^[PSC]//;
#$user =~ s/\.(ppp|slip|cslip)$//;
you can perhaps put
print($user);
right after these and you should see
well what I would do is printing something else to test if the checkrad
script is working until there. like
print(hello);
:) and then just before
$telnet-print(list connections);
you can put like
sleep(60);
so it will sleep 60 seconds
so you can see if your user is already inside this netserver
oh yes, I missed that damn, but you can better look for in the line
anywhere... should be like this (I think)
Prompt = '/\/');
so perhaps that way it would work whatever the NAS name is...
If you have different names in different NASes that would be nasty :)
Evnren
Ray wrote:
turns out that
for one thing, download latest release 0.9 something and try the
checkrad which comes inside...
then did you set etc/clients.conf and etc/naspasswd ? what did you set ?
the important thing is nastype login and password ...
what kind of nas do you have? etc. if you use snmp, did you try to see
How can I set freeradius so that if nas port type is
Async OR Virtual then it will accept a user? when I put
nas port type to Async then the users with virtual are not able to
connect. Is there a way to OR this item?
-
List info/subscribe/unsubscribe? See
did you try to take off the double quotes?
alantu wrote:
HI all
I get a question about Expiration .
when i make a user boy in the /raddb/users file,such as
boy Auth-Type := Local, User-Password == 888, Expiration := 20 Aug 2003
it works well
but when i put it in
:05:07 -0700
From: Evren Yurtesen [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Re: Expiration with mysql
Reply-To: [EMAIL PROTECTED]
did you try to take off the double quotes?
alantu wrote:
HI all
I get a question about Expiration .
when i make a user boy in the /raddb
If you have this in your sql.attrmap file then it should go to right place
checkItem Expiration Expiration
I am using dialupadmin also and works fine to me
alantu wrote:
HI all
when use dialupadmin to add the expiration attribute to users,the attribute always
addes
You can not log passwords if you are using chap.
Because no password is transmitted over the line.
Try with pap if its ok.
Evren
Omar Armas wrote:
I have freeradius 0.9.0 under debian 3 with mysql authentication.
I wanto that in raidus.log appear the clear text password in login
failures. I have
No, modifying sources wouldnt do any good, because when you use chap the
password is not transmitted over the line. Thus there is no way for
freeradius to know what password the client entered.
Pablo Veliz wrote:
El Thu, 28 Aug 2003 12:33:12 -0500
Omar Armas [EMAIL PROTECTED] escribió:
I have
by the way, didnt they have a password database to authenticate users
anyhow? how come they have an not up to date database of passwords? How
were they authenticating anyhow?
Omar Armas wrote:
Why would you want to log the password from the database? You can
always look it up in the
Yet you can see that they type the password wrong. If you are using chap
then you should accept that you cant learn more than that.
As a matter of fact using CHAP is not any more secure than using PAP if
you are using it for dialup. It is extremely difficult to spy on a
dialup line anyhow
Hi,
I wonder if anybody is using freeradius with vpdn connections?
I am getting weird port id numbers from the cisco. Not the virtual
interface numbers. I dont know what is wrong. Any experiences?
Evren
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Perhaps your web server is not processing PHP at all.
This was discussed in this list a few weeks ago. I am
not using redhat so I better not comment :) But you
surely can search from the mailing list archives.
Also the problem was with apache2, this is not a dialup_admin
issue.
But, to be sure,
1 - 100 of 105 matches
Mail list logo