Hallo,
ich habe also keine Chance mir eine Zahl vorlesen zu lassen, welche per Zufall
generiere? :-/ Ich frage nur deshalb, da ich in einem Subordner diverse
Soundfiles von Zahlen habe, welche ich von einem Debianpaket entpackt habe.
Gruß aus Kiel
Translation:
Hello,
there is no chance to
I'm new to FS, and experimenting with it on a constrained
environment (PCEngines ALIX board running Voyage Linux 0.62).
So far, FS has compiled fine, and I can register multiple
softphones and make calls between them, but I'm lost at how to
configure a Sangoma U100 so I can make and
Brian, this broken business explains a lot, I just assumed this was a normal
practise. This outbound-proxy parameter, I dont see any reference to this
anywhere.
This just causes Registration Failed with status DNS Error [503]
From: freeswitch-users-boun...@lists.freeswitch.org
I found the answer by myself while I had finished writing the e-mail. The
correct call url is loopback/extension (in this case the command
is originate loopback/fakecall 1000 ). I'm sending the e-mail anyway for
future reference (can't find any example of that anywhere). Is the project
wiki
i'm arriving around 12:30PM -- are there any pre-ClueCon meetups this
afternoon? anybody need help with setup?
___
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
Hi,
Other than curl, is there anyway to do dynamic registration?
It there anyway to embed a script in freeswitch to do the authorization?
Thanks,
Anne
___
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
You could build your own module to do it how ever you please. But
forking a script every time to auth is not very scalable.
/b
On Aug 3, 2009, at 6:45 AM, Juan Backson wrote:
Hi,
Other than curl, is there anyway to do dynamic registration?
It there anyway to embed a script in freeswitch
You must be on SVN trunk.
/b
On Aug 3, 2009, at 4:12 AM, Darren Williams wrote:
Brian, this “broken” business explains a lot, I just assumed this
was a normal practise. This “outbound-proxy” parameter, I don’t see
any reference to this anywhere.
This just causes Registration Failed with
Just look for large groups of people with laptops. I'm sure you can't
miss us.
/b
On Aug 3, 2009, at 5:46 AM, Chad Phillips -- Apartment Lines wrote:
i'm arriving around 12:30PM -- are there any pre-ClueCon meetups this
afternoon? anybody need help with setup?
If your linux distribution is Centos you have to install unixODBC-devel
postgresql-odbc unixODBC then compile freeswitch.
Look at this wiki page:
http://wiki.freeswitch.org/wiki/Mod_spidermonkey_odbc
BR___
FreeSWITCH-users mailing list
On Mon, Aug 3, 2009 at 4:43 AM, Raffaele P. Guidi
raffaele.p.gu...@gmail.com wrote:
I found the answer by myself while I had finished writing the e-mail. The
correct call url is loopback/extension (in this case the command
is originate loopback/fakecall 1000 ). I'm sending the e-mail anyway
Hi,
I'll appreciate if somebody tell me where has gone the mod_curl ? I just
need to use it for http method calls.
Regards,
-- afshin
___
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
Hello everyone,
I'm using a SIP trunk to link my PBX and FS.
My problem is when I try to call a softphone on FS from my ipphone, I've
the following error on FS during Authentication :
2009-08-03 14:58:27.123817 [DEBUG] sofia.c:4554 IP [PBX i...@] Rejected by
acl domains. Falling back to Digest
What is the output of wantouter hwprobe?
On Aug 3, 2009, at 3:12 AM, Merul Patel me...@mac.com wrote:
I'm new to FS, and experimenting with it on a constrained
environment (PCEngines ALIX board running Voyage Linux 0.62).
So far, FS has compiled fine, and I can register multiple
softphones
It is still there.
On Aug 3, 2009, at 8:38 AM, afshin afzali a.afzali2...@gmail.com
wrote:
Hi,
I'll appreciate if somebody tell me where has gone the mod_curl ? I
just need to use it for http method calls.
Regards,
-- afshin
___
Hi,
I'm taking a close look at event socket on FS 1.0.3. Configuration is
the same as on http://wiki.freeswitch.org/wiki/Event_Socket. fs.pl and
fsconsole.pl work but I was not able to telnet to port 8021. As I've
done that I received somewhat like:
#auth/request
I typed in: auth ClueCon
On Aug 3, 2009, at 10:30 PM, Ngo-Vi Hoai-Anh wrote:
Hi,
I'm taking a close look at event socket on FS 1.0.3. Configuration is
the same as on http://wiki.freeswitch.org/wiki/Event_Socket. fs.pl and
fsconsole.pl work but I was not able to telnet to port 8021. As I've
done that I received
Hi,
you only have to write auth password and hit enter twice. The default
password is something like ClueCon.
BR
- Ursprüngliche Mail -
Von: Ngo-Vi Hoai-Anh hoai...@gmx.de
An: freeswitch-users@lists.freeswitch.org
Gesendet: Montag, 3. August 2009 16:30:44 GMT +01:00
Julien,
Place an ACL entry with the IP address for your PBX in the following file:
/usr/local/freeswitch/conf/autoload_configs/acl.conf.xml
list name=domains default=deny
node type=allow cidr=123.12.12.1/32/ !-- your pbx ip --
/list
This should allow unauthenticated invites from your PBX to
I've gotten 1.0.4pre9 , but i can not see it :(
-- afshin
On Mon, Aug 3, 2009 at 6:33 PM, Michael Jerris m...@jerris.com wrote:
It is still there.
On Aug 3, 2009, at 8:38 AM, afshin afzali a.afzali2...@gmail.com
wrote:
Hi,
I'll appreciate if somebody tell me where has gone the
On Aug 4, 2009, at 12:01 AM, afshin afzali wrote:
I've gotten 1.0.4pre9 , but i can not see it :(
-- afshin
In trunk.
On Mon, Aug 3, 2009 at 6:33 PM, Michael Jerris m...@jerris.com
wrote:
It is still there.
On Aug 3, 2009, at 8:38 AM, afshin afzali a.afzali2...@gmail.com
wrote:
Thanks
On Mon, Aug 3, 2009 at 8:42 PM, Seven Du dujinf...@gmail.com wrote:
On Aug 4, 2009, at 12:01 AM, afshin afzali wrote:
I've gotten 1.0.4pre9 , but i can not see it :(
-- afshin
In trunk.
On Mon, Aug 3, 2009 at 6:33 PM, Michael Jerris m...@jerris.com
wrote:
It is still
Definitely the same reply:
FreeSWITCH Version 1.0.trunk (14457)
[ERR] sofia_reg.c:1460 05061292117 Registration Failed with status DNS Error
[503]. failure #1 and so on.
The complete config is:
include
gateway name=05061292117
param name=username value=05061292117/
param name=realm
What is the output of wantouter hwprobe?
voyage:~# wanrouter hwprobe
---
| Wanpipe Hardware Probe Info |
---
1 . U100 : BUSID=1-1 : V=00
Card Cnt: U100=1
voyage:~# dahdi_hardware
usb:001/002 wanpipe- 10c4:8461 Sangoma
--
David Knell, Director, 3C Limited
T: +44 20 3298 2000
E: d...@3c.co.uk
W: http://www.3c.co.uk
On 3 Aug 2009, at 13:41, Brian West br...@freeswitch.org wrote:
Just look for large groups of people with laptops. I'm sure you can't
miss us.
/b
On Aug 3, 2009, at 5:46 AM, Chad Phillips
I have yet to configure one of these cards for freeswitch so it's
possible it's not in the config util yet. I suggest contacting
sangoma support for assistance
On Aug 3, 2009, at 12:56 PM, Merul Patel me...@mac.com wrote:
What is the output of wantouter hwprobe?
voyage:~# wanrouter
Hi, a bit late on answering some of the questions, but, here we go.On
Aculab, all codecs were G711u. The same codec we have on FS:
freeswi...@conference show channels
API CALL [show(channels)] output:
Excellent! Many of us are at the hotel already, getting everything set up.
-MC
On Mon, Aug 3, 2009 at 10:57 AM, David Knell d...@3c.co.uk wrote:
--
David Knell, Director, 3C Limited
T: +44 20 3298 2000
E: d...@3c.co.uk
W: http://www.3c.co.uk
On 3 Aug 2009, at 13:41, Brian West
Hi,
What's the correct way to detect a number changed SIT tone in Freeswitch ?
From: freeswitch-users-boun...@lists.freeswitch.org
[mailto:freeswitch-users-boun...@lists.freeswitch.org] On Behalf Of Patrick
Grondin
Sent: July-28-09 3:44 PM
To: freeswitch-users@lists.freeswitch.org
Subject:
Yeah, it's there but, as you can see it from the google queries below it's
not easy to find that page - unless you know what exactly you are looking
for and search for loopback. A simple example (i.e. in Sofia Syntax) would
fill the gap (I'll be happy to do it ASAP)
Hello,
I setup libpri and a sangoma card A108DE, but I cannot dial out.
At startup I receive on the D channel
TDM API: CMD: 18 : Operation not supported
When dialling Libpri debug shows that the numbering plan is fine and
that it accepts the screened number, but then it finally hangs up
which of the hostnames is fake?
/b
On Aug 3, 2009, at 12:25 PM, Darren Williams wrote:
Definitely the same reply:
___
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
The bmnha-01.bt.com is the one that doesnt resolve
www.bbvservice-560129.bt.com resolves to 62.239.15.140
From: freeswitch-users-boun...@lists.freeswitch.org
[mailto:freeswitch-users-boun...@lists.freeswitch.org] On Behalf Of Brian West
Sent: 03 August 2009 22:24
To:
Technically, loopback is not meant to specifically allow you to call
non-user extensions, it simply allows you to hit the dialplan.
For example,
originate sofia/gw/gwname/fakecall 1000
(where gwname is the gateway routing your calls out, and 'fakecall' the
non-user extension)
will also allow
uhm... does it?
freeswi...@w2gz8vnr01 originate sofia/gateway/callwithus.com/fakecall 1001
API CALL [originate(sofia/gateway/callwithus.com/fakecall 1001)] output:
-ERR CALL_REJECTED
Anyway, I clearly understand that loopback allows to hit the dialplan,
maybe I couldn't find it before
Put the real hostname in register-proxy and outbound-proxy and the
proxy needs to hold the fake one.
/b
On Aug 3, 2009, at 4:39 PM, Darren Williams wrote:
The bmnha-01.bt.com is the one that doesn’t resolve
www.bbvservice-560129.bt.com resolves to 62.239.15.140
Can you please help me?
-- Forwarded message --
From: Thangappan.M thangappan...@gmail.com
Date: Mon, Aug 3, 2009 at 12:42 PM
Subject: Need Help In IVR
To: freeswitch-users freeswitch-users@lists.freeswitch.org
Dear all,
I am in the process of implementing IVR in Perl using
37 matches
Mail list logo