Jortan H wrote:
However, when I started Freevo, it stopped with the
followin error:
pygame.error: No available video device
I'm using the following freevo.conf:
chanlist = us-cable
display = dfbmga
geometry = 720x576
jpegtran = ./runtime/apps/jpegtran
mplayer = /usr/local/bin/mplayer
tv = pal
tvt
Aubin Paul wrote:
Rob,
How do you have your PVR250 setup? I tried using
Freevo/DirectFB/mplayer with the PVR250 and while normal movies looked
good, anything from the PVR looked awful.
Hmm. When I got directfb setup last night the first thing I noticed was
that files from the pvr250 were _aweso
Rob Shortt wrote:
that files from the pvr250 were _awesome_. However upon further
examination there is an extremely noticable and annoying choppy effect.
Do you get that?
BTW I notice that mostly in scenes with high motion.
---
This SF.Net
Rich C wrote:
Hello Rob,
When using IVTV card, what should the VCR_CMD
parameter be set to. In the example I saw, it points
to the command '/var/media/bin/tvrecord' or something
like that.
You can safely ignore VCR_CMD when using record_server with the pvr
card. I will update the comments in
Rob Shortt wrote:
Rob Shortt wrote:
that files from the pvr250 were _awesome_. However upon further
examination there is an extremely noticable and annoying choppy
effect. Do you get that?
BTW I notice that mostly in scenes with high motion.
I also forgot to mention that I see this on DVDs
Aubin Paul wrote:
Isn't the TV out interlaced? Shouldn't mplayer leave it alone?
Yes and yes. "should"
But it might have something to do with the buffering -
single/double/triple. Hopefully I will be able to figure something out
when I get home after work today.
-Rob
--
Dirk Meyer wrote:
I don't think it's too much to ask for the user to get the mplayer
somewhere else. There are many sites where you can get a fully working
mplayer or xine -- but not at USA, German, France, ... server. I don't
like the law, but I think we should respect it (the same we we want
othe
Alec wrote:
Hum...then it's not the reason why i do not see my roms in the directory.
By any chance does these lines in the log tells you something?
MameRomList version number 1 is stale (new is 2), must be reloaded
MameRomList has 0 items.
Find your romlist (/var/cache/freevo/romlist-0.pickled, or
Alec wrote:
That worked. Nowow it's freevo that's crashing when trying to play, but
i can see the list of the roms.
Is there any doc on how to use xmame?
Specificly for Freevo? No. For xmame in general check their site.
Can you send the traceback from when Freevo crashes?
-Rob
-
Alec wrote:
That was specificaly for freevo of course.
For the crash it was because xmame-gl could not find libGL.so. I works
with standard xmame (i had to remove -modenumber 6 it's not suported ).
In case you're still interested, here it is :
Game.play(): Starting thread, cmd=--prio=-20 /usr/gam
den_RDC wrote:
If you use a Nvidia card u pretty much have no choice but using X (afaik
accelerated output + tvout in fb is impossible with nvidia cards, maybe
directfb will do this in the future but i doubt it).
I disagree!
Before I got my G400 I was using a geforce4 MX440 for my tv-out. When
Joe Stump wrote:
I'm trying to get the PVR for Freevo working and I'm having some problems.
The cron job is all set up and running without any DLL problems and the
logs don't show anything of any interest, but I'm not getting any recorded
shows and I think I know why.
In record_config.py my RECORD_
Joe Stump wrote:
My recent trials with the recording aspect of Freevo has led me to the
conclusion that in order to do *serious* recording within Freevo a better
backend will be needed. I know one of the goals of Freevo is to build an
out-of-box application, but for those of us yearning for reoccur
Joakim Berglund wrote:
Hi there!
First thanks for the great improvment you have done on the documentation
lately!
The only thing I haven't up and running 100% right now due to that is the TV
recording.
I can't see the record_server beeing mention at all in there...
So my question regarding this i
Deon Stoltz wrote:
Hi all
Hi.
We are trying to use freevo with a remote control device (IR). However,
our platform (allwell Set Top Box) encodes the Infra Red as commands on
the command line. This it seems bypasses the lirc interface.
Sounds like a fun project! Can you send some links on the box
Joe Stump wrote:
TODO:
- Remote control information (I get my streamzap soon ...)
- Xine information
- CD ripping plugin info
- WebVCR+ section (coming very soon)
How about documenting Freevo's own web interface instead? :) I can
provide you with any information you may need.
- Web radio informa
Mark Benson wrote:
I've downloaded the binary relase 1.3.4 and when I run it with dxr3 as
the output I get the following error
pygame.error: No available video device
[EMAIL PROTECTED] freevo-1.3.4]#
I have 1.3.2 binary running fine with the dxr3, but 1.3.4 does not want
to play.
Any ideas?
Google... pylcd, first hit.
http://unattached.i-no.de/software-pylcd.shtml
-Rob
Berni wrote:
Hi there,
I wanted to use the LCD-Plugin of freevo 1.3.4 but I can't use it use
it due to the same error as posted here:
http://sourceforge.net/mailarchive/message.php?msg_id=5737460 I
compiled freevo th
[EMAIL PROTECTED] wrote:
Hi,
Hi.
I started messing around with freevo last week, and I am really impressed
with where it's at! I'd like to help out with the effort if I can find a
spot to apply myself.
I have a question, but first - some info on my setup:
Freevo version: 3.5
That's interesting bec
John Molohan wrote:
Tried out the weather plugin earlier and got 'WEATHER: error reading
cache. Using fake weather.' I tried two different stations and got the
same results. Also with this enabled the menu system then takes between
2 to 20 seconds to switch items, if I disable the weather plugin al
Jim Duda wrote:
I just upgraded from version 1.3.2 from 1.3.4. The new look and feel
is slick, however, I have one complaint.
When I view my MP3 file directory now, I get icons instead of
text names. When i select the icon, the text name appears
above the icon. The files in the Movies directory
). I am sure there are some other things like that but now
that this stuff is on the main branch people will work on it. ;)
-Rob
Rob Shortt wrote:
Hi all,
The record_client/server interface is at a point now where I think
Freevo main should be using it. The server has been rock solid for me
Paul Cowper wrote:
Will I have to download that app (iirc tvtime) or is that usualy
included in a distro?
You will need to download tht one seperately. I think it even has a
nice rpm for you. - http://tvtime.sourceforge.net/
You see all I need to do is tune my tv card in, also even if I cant
Paul Cowper wrote:
Well Using a web based interface would be a great idea. But I am then
sure it would not have to be python. It could just as easily be perl.
Plus the graphical element can be done using html.
Freevo has a builtin webserver, in python, and uses special python
'resource scripts' as
IMO xml files aren't terribly user friendly and shouldn't be used for
user facing configuration. I am not suggesting python files are any
better. ;)
I guess my point is that using python for the main configuration source
we wouldn't need to parse the file, just load or import it.
-Rob
Rafael
Robert Rozman wrote:
Hello,
Hi!
I wonder what are possibilities and starting points to embed TV or webcam
screen into Freevo menus. With this we could leave TV on ,when doing some
other things (like PIP) or browse channels with live output, or take a look
at frontdoor webcam who is at the door ...
On a side note I would really love to create some freevo plugins to take
advantage of the pvr-350's hardware decoder but unfortunately I don't
have one. Anyone out there feel like making a donation? ;) Actually
this could also be taken care of by xine or mplayer if they had output
plugins fo
Is sourceforge dropping anyone else's emails? This is my 3rd try
sending this although I did notice that one of my other attempts landed
in the archive....
Rob Shortt wrote:
Graeme Christie wrote:
Hi. I was just wondering whether anyone was currently using a DVB
card with Freevo.
Shane Crosby wrote:
I posted earlier asking what an ideal hardware configuration would be.
One person suggested that I purchase the Hauppauge PVR 350 because it
has hardware encoding. However, in the freevo FAQ it says that hardware
encoding is not supported under linux.
"There is currently n
Graeme Christie wrote:
Hi. I was just wondering whether anyone was currently using a DVB
card with Freevo. I've just installed a new Avervmedia DVB-T card in my
freevo Box (It's a budget kind with no MPEG2-decoder) and have the
latest cvs of mplayer playing tv from it with no problems (eg wit
Matt McLeod wrote:
DVB cards don't encode anything -- programmes are broadcast already
MPEG-2 encoded.
Oh yeah, I forgot.
This might be pretty easy. Can you tell me how the DVB device works?
Can you simply read a stream from the device and save it to a file?
Pretty much, yes. You have to tu
Ryan Novosielski wrote:
Next problem -- it claims that there is no screen available for 720x480.
However, that is exactly the resolution that the ivtv-fb module is using.
Are you using X? If so then you must have a modeline and screen section
for 720x480, I think.
I saw your email to the ivtv li
Ryan Novosielski wrote:
Nope, not using X. Here is basically what happens. I insert the required
modules for the TV out. If I have no fb modules inserted for the regular
video card of the system (I ordinarily use vesafb for my console), the
console moves over to the TV, however, the cursor is the o
Bart Heremans wrote:
recordings 'record_client: connection error'
Is your recordserver running? The client can't connect to it.
-Rob
---
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_
Bart Heremans wrote:
I start the webserver en recordserver outside freevo with the
/etc/init.d/freevo script that is installed with the gentoo ebuilds.
The recordserver starts correct :
2003/10/06 15:44 CEST [-] Log opened.
2003/10/06 15:44 CEST [*RecordServer*] twisted.web.server.Site starting on
Gray, Tim wrote:
Is the new record server hardcoded for recording or can I still customize
the record command.
You sure can. The generic_record plugin (the deault) uses VCR_CMD in
the same way as before.
I.E. I flip a bit on my parallel port to turn on/off an LED on the front of
my tivo box to
John M Cooper wrote:
On Mon, 2003-10-06 at 13:39, Bart Heremans wrote:
Hi,
I tried yesterdays snapshot and freevo-1.4-rc1 and I have problems with the
recordserver.
When I try to view sheduled records or try a manual record via the webpage I
get an error page, here is the last part of the traceba
Gray, Tim wrote:
very cool Rob... thanks for the updated info.
I have been pretty much dubbed the freevo-guy here at work and at the LUG
(Linux users Group) I've built 7 freevo machines so far (and getting tired
of having different hardware to mess with each time.)
I know the number one feature pe
Gray, Tim wrote:
In my never ending struggle to make thing difficult.. I'm messing with
another freevo configuration. This time using the fbdev for output and an
ATI all in wonder for the TV out.
using mplayer from the command line. it play's fullscreen nicely. same file
played from inside freevo
Gray, Tim wrote:
Until they integrate video in switching and IR blasting to control a cable
box/directtv box there is no use in having them in there to slow everything
down.
Incidently I now have IR blasting working with my sat box and Freevo.
There are a few things I need to pluginify and tweak b
Jason Tackaberry wrote:
Another problem I'm having is that the guide data from Zap2it isn't
completely inaccurate for ExpressVu. It's never been right since I
first checked out xmltv, back in April or May some time. Maybe I'll
fire off an email and let them know.
I have ExpressVu also, and have r
Michael Juarez wrote:
Hi, I currently have a VIA M-1000 installing with Debian, and recently
installed the Freevo debian packages from the site. Freevo works fine
to load up, but whenever I select shutdown, my resolution is put out of
sync (the computer is hooked up to a tv with onboard video o
Check the syntax of the last line before that one. Sometimes if there
is a problem the syntax error will be reported on the next line.
Aubin Paul wrote:
Hard to say; check your indentation. There's something wrong with that
line, but if it's not indented in a weird way, you may want to send the
Matt Camp wrote:
I've actually struck another problem... it seems that the channel list
that mencoder uses is somewhat different from tvtime...
I am currently working on centralizing all of the channel changing for
Freevo. This will let us use Freevo's channel list, frequency tables,
and any cus
realmagic) receiver with an acitsys ir200l blaster. Is
your python code in the freevo tree?
--Jeff
* Rob Shortt <[EMAIL PROTECTED]> [2003-10-10 23:26:17 -0300]:
Jeff Beley wrote:
Rob,
How did you the blaster working with your satellite setup? I've had
issues getting the remote to ir
Peter Howell wrote:
I recently upgraded to 1.4 and immediately ran into problems. I started record_server.py from the command line, then started freevo, and tried to record a couple test programs, one which was already running, and on that was about to start. This is the results I obtained from m
Rob Shortt wrote:
Peter Howell wrote:
File "/usr/local/freevo/src/helpers/recordserver.py", line 598,
in xmlrpc_findMatches
(status, response) = self.findMatches(find)
exceptions.ValueError: unpack list of wrong size
Are you doing a search here? That method sho
Gray, Tim wrote:
http://www.gctglobal.com/Products/Set_Top_Box/STB6086N2/stb6086n2.html
These are about $350.00 for the 800mhz version... no ram or hard drive
installed.
I have looked into these as well. I think they are way overpriced, all
you get is a STB case and a mainboard with some onboard
Rob Shortt wrote:
1) V8000A(no tv-out)
BTW, for those who don't know, that's a VIA mini-tx 800Mhz.
-Rob
---
This SF.net email is sponsored by: SF.net Giveback Program.
SourceForge.net hosts over 70,000 Open Source Projects.
See the
Bart Heremans wrote:
Hi,
Just for info, you can't add a cdrom and a pvr-350 card at same time in a
via seriniti case. Also they are noisy.
You certainly can, I just finished building one last week. I read a few
reports about this beforehand but decided to try it and ended up with
over a centim
Gray, Tim wrote:
your $630.00 mark ready to go.
USD. So now your total is up to ~$630, and that is without a rom drive.
OOPS! I typoed... I meant $530. :P
---
This SF.net email is sponsored by: SF.net Giveback Program.
SourceForge.net hosts
Gray, Tim wrote:
Anyways, a mini-itx setup woth a case that looks like a piece of video
equipment would be more in cost. although I'm pretty sure your assessment
on not having enough power ot encode video is wrong. I record from a ATI tv
wonder VE with mp1e on a 500mhz P-III here and get good res
Tim Walter wrote:
First to get it out the way.. Can the record server run without XMLTV
installed?
Yes. You must still have TV_CHANNELS configured in your local_conf.py.
Assuming it can, how can I start the Record Server manually as a check?
Whatever I try and organise the web interface resolu
Dirk Meyer wrote:
So back to apple. We have three choices now:
1. Ignore the terms of use and include it (I don't like this at all)
I don't like that one either, it could bring an unwanted kind of
attention and trouble.
2. Ask Apple for permission. We could agree to add a special copyright
no
StormeRider wrote:
VCR_CMD = ('/usr/bin/mencoder ' +
'-tv driver=v4l:input=0' +
':norm=NTSC' +
':channel=%(channel)s' +
':chanlist=us-cable' +
':width=320:height=240' +
':ou
Richard van Paasen wrote:
Now I want to add TV recording (and maybe playing/time-shifting) to
Freevo, so I need to buy a TV card for it. It must have h/w MPEG
encoding since the VIA board is only 1GHz, but I'm not sure about the
decoding part. Do I need to get an expensive Hauppage WinTV PVR-350
Mike LeVan wrote:
from pygame.locals import *
ImportError: No module named pygame.locals
Freevo depends on pygame, if you are not using a binary dist of Freevo
which includes a runtime you need to have pygame (and other things)
installed. How are you able to run Freevo (main) at all?
-Rob
Mike LeVan wrote:
You got me. I am not using a binary version, but an RPM
version. I'll try to install pygame and see how that
goes
Everything else works fine. I can watch TV, a DVD, and
the webserver runs. Music plays, and I can view images.
If you can do those things and have no pygame installed
Tim Walter wrote:
Freevo setup and working for TV and playing DVDs, also web interface
works fine. Can set up recordings via web and all appears to work,
channel choice, timing (out by an hour but can sort that later!), save
The out by one hour problem has to do with manualrecord.rpy and
pytho
Rob Shortt wrote:
Tim Walter wrote:
Freevo setup and working for TV and playing DVDs, also web interface
works fine. Can set up recordings via web and all appears to work,
channel choice, timing (out by an hour but can sort that later!), save
The out by one hour problem has to do with
Richard van Paasen wrote:
A short question: is timeshifting supposed to work with ivtv/PVR-250 ?
Not yet. I have plans on adding a xine tv viewing plugin to use xine's
pvr timeshifting capabilities. This is a short-mid term thing on my
TODO list.
-Rob
---
Paul Kimberley wrote:
Hi,
I'm having the following problem with the webserver/recordserver.
When ever i press the manual record button i get an error, but
everything else works.
value="'+ch.id+'">'+ch.tunerid+"\n"
exceptions.TypeError: cannot concatenate 'str' and 'int' objects
Check your TV_C
Paul Kimberley wrote:
Thanks, that was it!!
Although that's weird because I tried 'TV_CHANNELS = None' and it gave
me a similar unicode error, and i tried the 'freevo tv_grab -query' and
it gave me the third arg with out the quotes.
I guess it's a bug in the tv_grab plugin.
Exactly. It was fi
Diddie wrote:
I use the snapshot version (20.Oct.2003) of freevo.
I'd like to do recordings with freevo. But everytime I choose to
record, I get this error:
File "/usr/lib/python2.3/site-packages/twisted/persisted/marmalade.py", line 363, in
jellyToNode
state = obj.__dict__
AttributeError: '
Richard van Paasen wrote:
I have music albums in subdirs of "/video/" and video files in
"/video/". In local_config.py I can set e.g:
DIR_IMAGES = [ ('Images', '/images') ]
But how do tell freevo that it should display the subdirectories in
/images/ when I select Images from the main menu? Sa
David Willis wrote:
I tried freevo recordserver start - I get a list of warnings about duplicate
plugins (all ignored), and then nothing. No process listed as running, and
when I try to record something, the error about the failed connection to
"record_client". I'm puzzled!
Please post the startu
Mattias Ackers wrote:
I wonder if it is possible to use the Composite & S-video input of a
standard BT8X8 TV-card with Freevo?
In mplayer, or tvtime, you should be able to change the input source for
watching tv, and mencoder will have the same for capturing.
After we release 1.4 I will be makin
Gray, Tim wrote:
First both the recordserver and webserver will NOT start unless I run them
from within the /usr/local/freevo directory and by usingthe ./freevo
recordserver & command.
they both will not run from the inittab or anywhere else.
This is working fine for me, my inittab:
FV1:2345:respaw
Hi,
I have put together a new binary runtime and if there are no problems
reported with it I will post it on the downloads page. It contains many
updated libraries, python modules, and python 2.3.2. If you are running
anon cvs or a snapshot, and Freevo from a single directory (as opposed
to
Well, lucky me. I just tested this on a new machine (fresh freevo
install, old python, no deps) and I'm getting GLIBC errors. I'll try to
sort this out in a bit.
-Rob
Rob Shortt wrote:
Hi,
I have put together a new binary runtime and if there are no problems
reported with it I wi
I have made a few fixes and a new version is up for testing:
wget http://freevo.sourceforge.net/runtime/freevo-runtime-0.3.tar.gz
Rob Shortt wrote:
Well, lucky me. I just tested this on a new machine (fresh freevo
install, old python, no deps) and I'm getting GLIBC errors. I'll tr
Hi, please try the new runtime. You may get it at:
wget http://freevo.sf.net/runtime/freevo-runtime-0.3.tar.gz
And install it:
./freevo install freevo-runtime-0.3.tar.gz
I hope that fixes your problem, please report back.
-Rob
Philip Collins wrote:
Hello I just installed freevo-1.4rc4 and no
Aubin Paul wrote:
-Rename files in freevo?
Another thing that would require some way of inputting text, which is
difficult with the remote.
It would be nice if someone would write an input widget similar to how
cell phones work with 1 = ABC and 2 = DEF, 3 = GHI, etc.
Such a beast exists. :)
I m
Eirik Meland sent in a patch for padding the start and end times of
recordings. I have been working on integrating it but I'm in the middle
of working it into some conflict resolution code.
So, it will show up soon. :)
-Rob
Gray, Tim wrote:
how about a variable in local_conf.py that allows me
Travis wrote:
You can set passwords?
Yep. In a media directory you have setup in Freevo place a file called
".password" and in it have a single line with a numeric password. I
forget the maximum character length... maybe 6. When you enter this
directory in Freevo it will prompt you for the pa
Dirk Meyer wrote:
Maybe you could upload it to the download page. But please don't
delete the file on the webpage, it's needed for the installer right
now (will be changed)
Done.
-Rob
---
This SF.net email is sponsored by: SF.net Giveback Prog
Niklas Brunlid wrote:
I run Freevo on an Asus Pundit (exclusively on TV-out) with no support
for anything like interlaced output (not that any cards seem to have it,
Are you saying that the tv-out on the pundit doesn't support
interlacing?? Can someone else comment on this?
I am interested in
Peter Svensson wrote:
Hi!
Hi!
I've finally gotten my hybrid cvs/sourceforge download freevo 1.4rc? to work
properly, and it's a real beauty. So maybe I haven't to find the station
logos yeat, but anyway. Almost everything works nice and feels stable.
Glad to hear it.
I have one small question con
All this stuff has been talked about before. Now that 1.4 is out you
will soon see the pre/post recording buffer feature.
For the recording notification the recordserver would have to notify the
TV frontend that it wants to start recording. I would like to have the
TV side listen for xml-rpc
Tim Walter wrote:
I want to run it unconnected to the internet so XMLTV won't work. How
do I make recording work satisfactorily as it seems it depends on XMLTV
to obtain the TV programme times. Without it freevo defaults to 1st Jan
for 3 months recording (Well, more or less!)
I would like to s
Joe Stump wrote:
Am I correct in saying this is not a working feature in the record server
or webserver? I have Seinfeld set the the highest priority, but it's not
being recorded *at all* because of other conflicts with favorites that
were added after Seinfeld became a favorite.
Correct, priorities
rozman wrote:
The strange one is this:
[EMAIL PROTECTED] freevo]# ./runtime/dll/freevo_loader
./runtime/apps/freevo_python -OO ./src/main.py
and I get this:
./runtime/apps/freevo_python: relocation error: /lib/i686/libc.so.6:
symbol __libc_stack_end, version GLIBC_2.1 not defined in file
ld-lin
Sorry for the late response. :)
Dirk Meyer wrote:
OK, I can now reproduce it. Rob, you won't like it.
You are correct!
The libdvdread in the runtime detects a libdecss in the system
(good). But they are compiled on different systems and are _not_
compatible. We need your css lib on your system to
Joe Stump wrote:
My favorites have mysteriously disappeard from the recording schedule.
Does Freevo not show them because they are favorites?
No, if they are scheduled to record they will show up. How are you
updating your listings? If you use the tv_grab helper then it should
schedule your fav
Hi,
Dave Graham wrote:
Does anyone have Via's EPIA-M working with freevo? I starting to put
I have an epia-m 10k as well, but it isn't in a system yet. However, I
have set up two itentical Freevo systems with this board and they a
working really well. Their owners are quite pleased with them
Benjamin Zeiss wrote:
hi rob,
--On Wednesday, December 03, 2003 10:38:50 -0400 Rob Shortt
<[EMAIL PROTECTED]> wrote:
I am pleased with the performance of the open source X driver for the
epia. I am running Debian Sid (unstable), self patched & built kernel,
and XFree86 CVS snaps
Dave Graham wrote:
"Bart Heremans" wrote:
I have a epia M and a PVR350.
I have been able to run X over the framebuffer driver for the pvr350 and
load freevo. But If try loading a divx or other file and output it with
mplayer ont the pvr350 it is very very slow.
So you use the pvr350 aus tv out? Th
Robert Winder wrote:
Wednesday, December 3, 2003, 11:39:10 PM, Rob wrote:
It would be a fun project to wite a player for the PVR-350. This could
be done in python an integrated right into Freevo. It should be trivial
to create a basic player but I don't have the hardware to work on (not
that I ha
Gray, Tim wrote:
I'm betting it's like the dxr3
No, its quite different,
it needs a mpeg video stream not a multiplexed mpeg video and audio stream.
and takes a stream with video and audio.
-Rob
will mplayer strip the audio and send only the video to the device?
-Original Message-
From:
Darrell wrote:
Just installed cvs and I can't get the recordserver up, following is the
error message.
Anyone with ideas ?
There was a problem with helpers using skin / osd functions but Dischi
just fixed it. A fix should be available for you in the next CVS snapshot.
-Rob
--
Dan Salmon wrote:
Are these files deprecated? Is there a more current recording setup for
Freevo-1.4? Did I miss a step during installation and these files were
not created?
Yes, record_daemon.py is depricated. record_server.py is now
src/helpers/recordserver.py and it doesn't require cron.
My
Dan Salmon wrote:
Rob:
I had another look and found the log files under /tmp. The record
server appears to try to start but the error " Record_Thread::run: past
wait()!!" appears to bring things to a halt. Any ideas with this
particular problem? Text below from /tmp/recordserver-0.log for a
Barnowl wrote:
hey-
I got dxr3 in SDL and mplayer and xine playing nice with my dxr3 board but I can't
get freevo to use it. I have set display = dxr3 in freevo.conf. I get no errors, it
runs on the moniotr with no chan it just ignores the dxr3 setting.
Have you tried export SDL_VIDEODRIVER=dxr3
Mick wrote:
On Sat, 2003-12-20 at 18:44, Juha Pahkala wrote:
- Has anybody looked into having dvb support in freevo? I only have a
digital tv-card in my box, and it'd be great if freevo would support
that too. I have absolutely no idea what this would involve, just
dreaming.
Yes. I purchased myse
Robert Rozman wrote:
I still remember feature that me and my wife particularly liked on 3com
Audrey (touchscreen qnx computer that was aimed at our kitchen). It had
simple mail client that was able to deal with ordinary wav files as email
attachments. And when sending mail, you could simply record
Justin T Wetherell wrote:
I have found that I can run dxr3 with the current runtime. All you have
to do is follow the instructions in the wiki then copy the libs to the
runtime directory and tit works fine. I even updated the wiki about a
week ago when retrying it.
That only works for you becaus
SDL isn't really an output method in itself but can be configured to use
various output drivers. The SDL_VIDEODRIVER environment variable will
let you specify which to use, see: http://sdldoc.csn.ul.ie/sdlenvvars.php
If you don't have X available it might be easier to setup the vesa
framebuffe
SDL_VIDEO_YUV_DIRECT=0.
-Rob
Rob Shortt wrote:
SDL isn't really an output method in itself but can be configured to use
various output drivers. The SDL_VIDEODRIVER environment variable will
let you specify which to use, see: http://sdldoc.csn.ul.ie/sdlenvvars.php
If you don't have X available i
You can tell Freevo where to look for your mediamarks file (upon plugin
activation I think) so if you modify the one that comes with Freevo it
might be a good idea to copy it to a new location.
On a related note I believe the webradio plugin and gxine-mediamarks are
depricated in Freevo CVS, in
stephan wezel wrote:
Hi,
Hi.
can I shutdown freevo through one lirc event/command without selecting the shutdown menu point ?
Yes!
and if how ??
Well, I am not sure if you can bind a Freevo event to shutdown but the
way I do it is with irexec. Irexec is a command that comes with lirc
that you
1 - 100 of 329 matches
Mail list logo
